While linking dita file in Robohelp gives an error.

The following error comes while linking with one framemaker dita file into Robohelp. Please Suggest ?

Wow! That's a long file path. Try moving the project to something shorter (e.g. C:\rhsource\<Projectname>) and try again.

Similar Messages

Error occurred while converting the file ".." An unknown error occurred -50

I've had a few tracks which seem to skip on my ipod but play perfectly fine on itunes.
As a result, I've been converting these tracks to ACC files; this has worked for a few files but for one particular album i get the following:
+error occurred while converting the file ".." An unknown error occurred -50+
I've tried renaming the files, I re-created my playlist but nothing works.
Thanks in advance.

*Skipping songs*
The iPod seems to fail to play all of the occasional track that iTunes, and indeed other PMPs, are happy to play. There is probably some minor technical error in the internal structure of the file which is normally ignored by other playback software but causes the Classic to bail out.
You may like to try scanning the files with MP3 Validator which can find & fix some internal MP3 errors.
Some users have also suggested that completely removing all id3 tags and then replacing the information can be a solution. This can be achieved in iTunes by selecting an affected track, right/option clicking and using the option Convert id3 tags > None. Since some files may mistakenly have more than one tag you may need to repeat this action. Once you have confirmed that no tag is present you can replace the tag information using Convert id3 tags > V2.3 (I believe it is recommended to avoid using V2.4).
Personally I have found files for which these solutions don't work. In this case the workaround is either to re-rip the tracks or get iTunes to re-encode the file, e.g. convert AAC to MP3 or vice versa and sync the newly encoded file to the iPod instead. Because transcoding will cause a loss of fidelity you should keep your original file so that if a future iPod firmware resolves this issue you can put your original files back onto the iPod.
tt2

Reloading DITA file with xref gives UNDEFINED CROSS-REF FORMAT! in FM8

Hi,
I'm using structured FrameMaker to author DITA files that are to be converted into .chm and pdf. I'm using fm-xref for hyperlinks to preserve the linking in the pdf output. However, I don't want to use the pre-defined cross reference formats (e.g. Figure, See_Title_and_Page) and so I defined my own (simply using the <paratext> building block).
However, when I reload the document, my new format is lost and it results in an UNDEFINED CROSS-REF FORMAT! message in place of my cross-reference. I've also tried changing an existing format but it reverts back to the original when I reload the document.
Is there somewhere that I can change the default cross-reference formats permanently?
Grateful for help.
Thanks,
Ian

Hi Ian...
You need to add the new cross-ref formats into the template(s) in order for them to be available in your documents.
...scott

I try to restore my ipod touch but it gives me error 3194 then i try to upgrade and it gives me error 28 i try to start tiny umbrella and use shsh files and it gives me error 2005

i tryed doing everything all it does is give me errors( 2005,3194,28). my itunes is up-to-date. no i havent jailbroken and well i need help! i modefied my host files with # 74.208.10.249 gs.apple.com # 127.0.0.1 gs.apple.com. Im not sure what to do!

Try this http://osxdaily.com/2010/12/06/error-3194-fix-for-itunes/

CS6 simple file quit, now gives me error code 4?

My InDesgin CS6 resume just quit as i was finishing up and now gives me error code 4??? Any ideas how to fix this? I tried opening this on another mac.. same thing. Not only will it not open but it crashed InDesign.. Its just a simple two page InDesgin file... geesh!

hoknok wrote:
Its just a simple two page InDesgin file... geesh!
Error code 4 is probably not recoverable, so for a two-page file you should probably just rebuild, but you can try opeing as a copy instead. If that works, copy the text and paste into a new file.

When I attempt to open a .ACSM file Digital Editions gives me "Error! Check Activation."

I'v tried uninstalling and then reinstalling Digital Editions (both v2.0 and v3.0) with same result. I have receintly had a hard disk crash and this is the first time I've used Digital Editions since I've restored from backup onto a new hard dirve. Any ideas?
jnf

Hi jnf,
Sometimes ADE gets its registration/activation confused and in a semi-authorized state.
Uninstalling and reinstalling does not help.
Unfortunately, it often then gives misleading error messages about what is wrong.
A common incorrect message informs you that the ID is already in use on another computer and cannot be reused.
This can often be resolved by completely removing any authorization using ctrl-shift-D to the Library screen on ADE (cmd-shift-D if on Mac).
Restart ADE, and then reauthorize with your (old) Adobe ID.
In extreme cases on the mac, the following extra step has helped. Navigate to /Users//Library/Application Support/Adobe/Digital Editions and drag the activation.dat file to the trash. If you are using 10.7, see Access hidden user library files | Mac OS 10.7 Lion. (http://helpx.adobe.com/x-productkb/global/access-hidden-user-library-files.html)
Please refer : http://forums.adobe.com/thread/1265248?tstart=0
Regards,
Ravi

Why Internet Script Error is generating while importing .SWF file in Robohelp 5?

Hi!
I am using Robohelp version 5. I am trying a import a .SWF generated using Adobe Captivate into a file. I am getting the following error message. Can any one let me know what needs to be done?
Thanks in advance,
Latha

Hi,
I pasted the following code (This code was given in one of the discussions) in the true code to fix the error that is poping up while viewing the .chm file.
<p><object type ="application/x-shockwave-flash"id="object1" data ="../Menucheckmark.swf" style ="border:none; "width= "400" height ="300">
<param name = "movie" value ="../Menucheckmark.swf"/>
<param name = "quality" value ="high"/>
Loading multimedia control.... </object></p>
I changed the swf file name and pasted in the true code. After generating the file, the true code changes as shown below:
<p><object type="application/x-shockwave-flash"
   id="object1"
   data="../RTDC.swf"
   style= "border:none;"width: "851";
     height:"718";
<param name="movie" value="../RTDC.swf" />
<param name="quality" value="high" />
loading multimedia control.... </object></p>
But still I am getting the error message. Can anyone help me on this?
Thanks,
Latha

Error opening link to file from email message - Redirect Error

Here is on example of this problem:
I get an e-mail message with text with some links, when a click the text the browser opens and displays this message: Redirect Error
On the PlayBook, I copied the hyper link from the text on the e-mail message and pasted it on a word document and this was the result:
http://click.herbalifemail.com/?ju�2a16767364067b7c1575&ls�f911767765007b77157977&m�fa1676716306&l�9915787567057475&s�fe16707266027474157377&jb�cf14&t=
Reading the same e-mail massage on my desktop PC I did the same thing and this was the result:
http://click.herbalifemail.com/?ju=fe2a16767364067b7c1575&ls=fdf911767765007b77157977&m=fefa16767163...=
On my desktop there is no problem and I’m redirected to the file but something is happening when a click that same link from de Playbook native mail.
Thank you for your help.

They appear to be different links. But I was able to open the pdf file. I was not able to understand it because it is not my native language but it was from herbalist.
Be a Shepard and not an iSheep.

UAG file access still gives script error with SP3 RU1

Hi,
I seems that UAG SP3 RU1 still have the same bug regarding file access and script error.
Also tried to change back and fort between CInt and parseInt (see link below) after SP3 RU1 has been Applied and still no luck :(
http://itcalls.blogspot.dk/2013/03/uag-2010-file-access-application-fails.html
If anyone have this working please let me know.
UAG SP3 version is 4.0.3123.10000 and im running 4.0.3206.10100 just to confirm i have Applied KB 2744025
/Peter

I'm having the same issues, and currently unable to update to SP4 due to a problem with using the UpdateSchema tool.
Does anybody know of a workaround at all?
Thanks
Martin

How can I make Photoshop Elements import files after it gives incorrect error code?

I had 17,000 photos on my hard drive well organized in folders before installing Photoshop Elements 11 today. I was able to get it to import only 467 into the catalog. I tried browsing, searching, selecting files and no matter what I did to bring inthe remainders (including trying to bring in folders with only 60-80 in each, moving files into new folders, etc.) and still can't see them in the organizer view. It allows me to highlight the folders or highlight the photo jpg files separately, says it is getting media, but then comes back with message that "files are not in correct format or are in the catalog" but they ARE in normal format jpeg, can view in other programs, and they are NOT visible in the catalog. Very frustrating, especially after wasting hours downloading the program from Amazon Marketplace - took hours, then had errors and had to redo twice. Running WIN 7 on 6 month old Sony computer with 8 GB RAM and quad processors. Thanks for any help.

You should try posting in the PhotoShop Elements forum, especially if no one else here has a better suggestion to offer. It is possible someone else has encountered the same problem and you could search there to see. If you post there and you do have an error message, you should include the details of that error message.
http://forums.adobe.com/community/photoshop_elements

Gunzip of ALL Oracle .gz files for linux gives crc error

So that we may better diagnose DOWNLOAD problems, please provide the following information.
- Server name - http://download.oracle.com/otn/linux/oracle9i/9201 and http://download.roacle.com/otn/linux/ias/9ias/902
- Filename - lnx_920_disk1.cpio.gz to pick one. lnx_920_disk[123].cpio.gz, lnx_iasv20_disk[1234].cpio.gz, Oracle9iAS_Rel2_Interop_Patch_Linux.cpio.gz, and 9iAS_902_Integration_LINUX.cpio.gz to be complete
- Date/Time - multple times - last attempt evening of 7/5/02 and morning of 7/6/02
- Browser + Version - Mozilla 0.9.2.1
- O/S + Version - Fresh install of Red Hat 7.2
- Error Msg - gunzip: lnx_920_disk1.cpio.gz: invalid compressed data--crc error, gunzip: lnx_920_disk1.cpio.gz: invalid compressed data--length error
gunzip continues to fail with "crc error" even after downloading all the files multiple times. Each time the size is correct to the other downloads and the the size stated on the web site. No error was received during the download process. The problem appears to be with the file on the server. I realize that Linux is not a big market for Oracle, but some assistance in trying to fix this would be appreciated.
Problems also exist with 9.0.2iDS_LINUX.cpio
cpio -icd < 9.0.2iDS_Linux.cpio results in cpio: premature end of file
The .zip, .jar, and .sh files are fine.
Thank you,
Jeremy

Kyle, try testing to see what type of files they really are. eg. file <file name>. I had a similar problem, it turns out that they are cpio format not gzip. You should be able to extract the cpio archive using "cpio -idmvI /mnt/cdrom/Linux9i_Disk1.cpio.gz"
Good Luck

Error while loading WSDL File in Eclipse

Hi Experts
We are getting the following Error while Loading WSDL File in Eclipse.
IWAB0399E Error in generating Java from WSDL: WSDLException (at /wsdl:definitions/wsdl:portType/wsp:Policy): faultCode=INVALID_WSDL: Encountered unexpected element 'Policy'.:
Please advice how to resolve it.
Regards
Prashant

It seems that your WSDL is not well defined, you need to test your wsdl via WS-I compliance in order to check if the wsdl is well created, you can do this via soapui, just create a new project, import the wsdl file or set the URL, left click in the project and select check WS-I compliance, this tool will test your wsdl and gives you a detailed report of what might be the problem.

Product Instance Registration Error Message: "System Failure: Error while retrieving xml file from database"

Hi Planning installation Gurus,
Did u get any luck to resolve this problem as i am also facing same problem "Error creating instance" during install of Planning 9.3.1. i tried 30-50 times reconfiguration every time same problem..
OS: Vista Premium
SQL Server 2005
Essbase:9.3.1
Error Message: "System Failure: Error while retrieving xml file from database"
Details of error:::::::::::::::::::::::::
at com.hyperion.planning.event.HspSysExtChangeHandler.run(Unknown Source
Can not get JDBC connection for SYS external changed actions.
Can not get JDBC connection.
java.lang.NullPointerException
at com.hyperion.planning.sql.HspSQLImpl.getConnection(Unknown Source)
at com.hyperion.planning.event.HspSysExtChangeHandler.actionPoller(Unkno
wn Source)
at com.hyperion.planning.event.HspSysExtChangeHandler.run(Unknown Source
Can not get JDBC connection for SYS external changed actions.
Can not get JDBC connection.
java.lang.NullPointerException
at com.hyperion.planning.sql.HspSQLImpl.getConnection(Unknown Source)
at com.hyperion.planning.event.HspSysExtChangeHandler.actionPoller(Unkno
wn Source)
at com.hyperion.planning.event.HspSysExtChangeHandler.run(Unknown Source
Can not get JDBC connection for SYS external changed actions.
Can not get JDBC connection.
Pls provide Solution

Hi John,
though i am trying with SQl server authentication with different user but still status is same of planningSystemDB.properties
SYSTEM_DB_DRIVER=hyperion.jdbc.sqlserver.SQLServerDriver
SYSTEM_DB_URL=jdbc:hyperion:sqlserver://neeraj-PC:1433
SYSTEM_DB_USER=windowsAuthentication
SYSTEM_DB_PASSWORD=CAFBAEFNBGEAABHEDOADFKADACBGBIFHBLCDFBAFFH
SYSTEM_DB_CATALOG=plandb
SYSTEM_DB_TYPE=SQL
INSTANCE=
my steps:
Using SQL Server Management Studio
Changed Widows authentication to SQL server authentication mode
In SQL Server Management Studio Object Explorer, right-click the server, and then click Properties.
On the Security page, under Server authentication, select the new server authentication mode, and then click OK.
In the SQL Server Management Studio dialog box, click OK to acknowledge the requirement to restart SQL Server.
In SQL Server Management Studio Object Explorer, right-click the server, and then click Properties.
On the Security page, under Server authentication, select the new server authentication mode, and then click OK.
In the SQL Server Management Studio dialog box, click OK to acknowledge the requirement to restart SQL Server.
To restart SQL Server from SQL Server Management Studio
To enable the sa login by using Management Studio
In Object Explorer, expand Security, expand Logins, right-click sa, and then click Properties.
On the General page, you might have to create and confirm a password for the sa login.
On the Status page, in the Login section, click Enabled, and then click OK.
In Object Explorer, expand Security, expand Logins, right-click sa, and then click Properties.
On the General page, you might have to create and confirm a password for the sa login.
On the Status page, in the Login section, click Enabled, and then click OK.}}}
anything else should i change.................

Photoshop gives "Program Error" when I try to open files while VPN

I think this may be a new one. While VPN on my company network, Photoshop CS cannot open any files. Either drag and drop, double click or even file open command. You get the clock and the message "failed to open because of a Program Error.... " or something close to that. I'm sure it says Program Error though. Works fine if I'm not VPN but soon as I'm on it stops opening files or even creating a new blank canvas gives that error. I checked Adobe forum and nothing there to find about this one. Anyone else have this happen?

Hi, SSI.
1. What VPN client are you using?
As a guess, your VPN client may be blocking a port that PS CS may use for license verification over the Internet. The fact that it works AOK when not using the VPN would tend to support this hypothesis. As to what port it may be attempting to use, I can't say, but you may be able to find this out from Adobe and then work with your firm's networking staff to see if this port can be opened for use when the VPN is active.
2. You noted that you "checked Adobe forum and nothing there to find about this one." Did you post to the Adobe Photoshop forum? If not, I recommend doing so.
3. You wrote: "You get the clock and the message "failed to open because of a Program Error.... " or something close to that. I'm sure it says Program Error though."As FYI, in cases such as this, copying down the exact text of the message is helpful.
Good luck!
Dr. Smoke
Author: Troubleshooting Mac® OS X

TM Error. An error occurred while linking files on the backup volume

I have a 1TB Time Capsule. It's been working great for over a month. I'm now receiving an error.
Time Machine Error
Unable to complete backup. An error occurred while linking files on the backup volume.
I don't know what has happened to cause this error. Does anyone know what has happened and how to fix this? The first time I received this error was when it showed under Available it had over 500 GB and was backing up 89.1 GB. Then the error. The backup scheduled time came up and TM started to backup again. Again with the error. The next time it backed up I made a note of the figures it showed. It starts the backup process "Preparing" and shows under Available 389.1 GB of 929.5 GB. Then Preparing shows that it's backing up, 13.5 GB. Then I get the error pop up. I check Time Machine and under Available it shows 370.3 GB of 929.5 GB. The scheduled time came up again. Available shows 370.3 GB of 929.5 GB and that it's backing up 18.9 GB. I'm trying to see if there is a pattern, for instance 389.1 GB - 370.3 GB = 18.8 GB. It's not 18.9 GB, but it's close. I'm wondering if there is a point which causes the backup to fail and figure out if this can be fixed. I'm stumped. The backups keep getting an error but the Available amount keeps getting lower. Again, any help would be appreciated. Maybe you see something I don't. Thank you.

I forgot to state this in my post; what I noticed beside "Latest Backup", is that it states "Failed ! (! is in a red circle)". (So why does the "Available" amount keep going down? Where is the disk storage space going if it's not backing up?). It started the backup again, it initializes "Latest Backup" by showing a blank. I was curious what it showed when I went into Enter Time Machine. I guess the last good backup was Sunday July 27, 2008 11:21 PM. That's what it shows prior to the NOW selection on the right. The Oldest Backup is June 19, 2008. I thought this might be useful to note.
I thought it would be a good idea to see what Time Machine is doing and record the steps. I know it will involve time and patience, but hopefully I'll find out something. It might be of use to someone.
- It's backing up again and it gets to the point showing that it backed up 18.8 GB of 18.9 GB and stays there for 20 minutes or so.
- Then it shows 18.9 GB of 18.9 GB, and stays at that point for a while.
- Available shows 351.5 GB of 929.5 GB.
- The Failed ! comes up again in Latest Backup. and backup stops.
- Again it looks like the disk storage is used up. (So the questions would be; 1. If the backup failed, where is the space going if the backup failed? 2. How can I get back what should be available and have it show the correct available amount?
It came up to the time it backs up again. It shows that the backup amount will be 18.9 GB. I turned Time Machine OFF. It looks like it will do the same thing. Does anyone know what is happening and what needs to be done to correct this and get my available space back with it recording the correct available amount (xxx.x GB of 929.5 GB)

While linking dita file in Robohelp gives an error.

Similar Messages

Maybe you are looking for