While load is going on in r3 at the time table is locked
Hi All,
i have some few queries.
1. while load is going on in r3 at the time table is locked.in which sccenarion this type of problem will happens.
2. Change run already started by aleremote.in which sccenarion this type of problem will happens.
3.aleremote user is locked.in which sccenarion this type of problem will happens.
Thanks & Regards,
chandra.
Hi All,
i have some few queries.
1. while load is going on in r3 at the time table is locked.in which sccenarion this type of problem will happens.
2. Change run already started by aleremote.in which sccenarion this type of problem will happens.
3.aleremote user is locked.in which sccenarion this type of problem will happens.
Thanks & Regards,
chandra.
Similar Messages
-
While loading transaction data into cube what are the tables generats
Hi,
while loading transaction data into cube what are the tables normally generats.Hi,
Normally datas will be loading to 'F'- Fact tables (/BIC/F****) *** - cube name..
When you do compress the request the data will be moved into E tables.
Regards,
Siva. -
fire fox starts by it self and goes to search site all the time please help
Possible malware infection
Do a malware check with some malware scanning programs.
You need to scan with all programs because each program detects different malware.
Make sure that you update each program to get the latest version of their databases before doing a scan.
* http://www.malwarebytes.org/mbam.php - Malwarebytes' Anti-Malware
* http://www.superantispyware.com/ - SuperAntispyware
* http://www.microsoft.com/windows/products/winfamily/defender/default.mspx - Windows Defender: Home Page
* http://www.safer-networking.org/en/index.html - Spybot Search & Destroy
* http://www.lavasoft.com/products/ad_aware_free.php - Ad-Aware Free -
My iPHONE 5 wifi is NOT working when am 3 feet away from router while my iPhone 4s has full signal all the time.Please help.
The problem would seem to be in the firewall in your router. Have you tried disabling it? I assume you've updated the router firmware, right? Consider bypassing the ISP provided router (using it as a modem only) and unsing another device such as an Aiport Express.
-
Little circle turns/ page doesn't load/ problem triangle comes up almost all the time
The little connecting circle comes on and turns no matter what -- whether it's from a bookmark, an email, a typed in address. It turns and turns, then either times out or says problem loading page ALMOST all the time (I can't figure our why or why not). I just downloaded the latest versions of both Firefox & Thunderbird. I check my AVG and Firefox has a clear pass.
It is possible that your security software (firewall, anti-virus) blocks or restricts Firefox or the plugin-container process without informing you, possibly after detecting changes (update) to the Firefox program.
Remove all rules for Firefox and the plugin-container from the permissions list in the firewall and let your firewall ask again for permission to get full unrestricted access to internet for Firefox and the plugin-container process and the updater process.
See:
*https://support.mozilla.org/kb/Server+not+found
*https://support.mozilla.org/kb/Firewalls
*https://support.mozilla.org/kb/fix-problems-connecting-websites-after-updating
Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance).
*Do NOT click the Reset button on the Safe Mode start window or otherwise make changes.
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes
Create a new profile as a test to check if your current profile is causing the problems.
See "Creating a profile":
*https://support.mozilla.org/kb/profile-manager-create-and-remove-firefox-profiles
*http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Profile_issues
If the new profile works then you can transfer some files from an existing profile to the new profile, but be careful not to copy corrupted files.
*http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox -
While running F110 mail trigger should happen at the time of payment Run
Hi Experts,
I have configured FBZP and automatic mail trigger for Payment Advice also. Now while running F110 then at the time of Proposal Run the mail is getting triggered. But since its proposal it can be edited also. So I need the mail should trigger at the time of Payment Run. Plz suggest how to achieve this.
Thanks in Advance,
ArabindaCheck this note: 836169
may be helpful with the config and setup, its a consulting note.... -
I own a PC and itunes store was running fine on it... up until i downloaded the new version and then it quit working it would load about half way and then quit and turn the store home page white i have tried a few different things including re installing, trying to fix it, but nothing has worked!
this has happened to me once before on an older computer and i could never get it back working then either and it has also happened to another person i know and they also have tried to fix it! i am very fusterated with itunes/apple for not fixing this issue becuase it has happened to many others as well!!
any help would be greatly appreciated!
THANKS!!!I've been working on this all day!!! I've tried everything I know of and can't get it to load either. Sounds like lots of people are having problems. Here is what I have so far...I have uninstalled EVERYTHING on my pc from apple and reinstalled itunes to no avail. I have tried all sorts of things I've read as fixes online. NOTHING has worked. Here is something interesting that i have noticed though. my main pc (which is the one i have always managed my itunes account with for years) is a 32 bit system running windows 7. Yesterday I installed itunes for the first time on my new netbook which is a 64 bit (windows 7) system and it works just fine. i have three other laptops (all window 7) in my household that are all 64 bit operating systems and ALL have updated to 10.5 and THEY ALL work fine. this is FOUR 64 bit systems ALL updated w/10.5 that work and ONE that is a 32 bit that will not. Can't get any help from apple. their suppot *****! I want to get someone on the **** phone or a live chat but cant. *** APPLE????? please let mw know if you find SOMETHING i can try next. I'm out of ideas and patience!
-
Iphone 3g randomly goes into recovery mode all the time?
I have an Iphone 3g version 4.3.5 (8L1). It works fine and i've never dropped it or anything like that. But the first time the problem happened i had just got done sending a text, pushed the lock button, and put it in my pocket. Then a few minutes later i pulled it out to check it and it wouldnt turn on. I held the lock button down and the connect to itunes icon came up, but nothing else. No emergency call option or anything. it wouldnt go away. i connected to itunes and it said it was in recovery mode. I tried to restore it but it came up with an error. i left it and tried again later. i restored but some things were erased. then it worked fine again. but later that night it did it again. so i just plugged it into the charger. in the morning i tried turning it back on again and it turned on without the connect to itunes icon. worked fine all day. but it does this every now and then. when i plug it in it goes back to normal after 10-20 mins. its annoying tho and if im not home my fone is stuck like that until i get back. why does it keep randomly going into recovery mode?
1. The latest iOS version available for the iPhone 3G is 4.2.1, not 4.3.5. Do you actually have an iP3GS or was your iP3G hacked to install 4.3.5?
http://support.apple.com/kb/HT3939
2. "I tried to restore it but it came up with an error." What EXACT error?
3. "i restored but some things were erased" What "things"? Did you get an error again. Were you restoring as new or using a backup?
4. Did you ever restore the phone as NEW without using a backup? -
There was an error loading this content...happens all the time
at least three times I day I have to unplug and plug in the power as it gives me the "there was an error loading this content" message constantly...why does this happen? This is a very frustrating device
That will usually indicate a network issue.
What is your current connection via speedtest.net
Make sure DNS is set to auto (settings - general - network)
If on wifi try ethernet
You can go to istumbler, netstumbler or similar to see a report of the network, look for signal strength and noise -
I live in the Philippines but my iPhone 4S was bought from Korea. There is no Apple store in my place and no one can help me fix my problem with my iPhone. I don't think Apple would replace my phone either despite the fact that it's still under warranty.
My phone would normally go on "No Service" status since I updated to iOS 5.1, so I am not able to make/receive phone calls/messages most of the time. It's really frustrating especially because my iPhone is just 3 months old.
Can anyone help me with my problem?
- I have restored my iPhone's OS and didn't do any back up
- Did reset network, reset all settings, among other resets available in my phone
- Used a new sim card from my network provider
- Used sim card from other network provider (since my phone is factory unlocked)
All the abovementioned didn't work and I'm getting really frustrated.I never had this problem when I was using iPhone 4.
Help me, please.Sounds like it's hardware issue. The iPhone warranty is based in the original country of purchase. Since it was bought in Korea you will need to ship the phone to someone you know in Korea to be taken in and then they will have to ship it back to you. The cost of shipping will be at your expense.
-
It does this all of time. I'm using Chrome right now & it doesn't! I have to stop using the browser that I have used for many years & now I'm using Chrome. Gosh, no issue like that!
Hi jayfmn, <br>
please upgrade to the latest Firefox and also maybe this article will help you:<br> [[Firefox crashes - Troubleshoot, prevent and get help fixing crashes]] -
IOS8 wifi or 3G its going on and off all the time, and if its on its very slow.
i have this problem since i update my iPhone 5s. My internet is oky. and I'm sure something happen because the IOS8.
SORRY maybe my answer is not helping but show what others said so far.
The problem seems to be when iPhone changes from LTE to 3G or WiFi and then STUCKS!
my workarround (a very bad one) reboot iPhone.
Flightmode on/off does not work for me
Network reset does not work for me
==> APPLE whta is your answer?
(maybe somebody from APPLE will read this!!!!!!!!!!!!!!!!!!
iPhone 5 iOS8 since 17.08.2014 and problem starts after update to iOS8 -
my ipad has never been dropped or overheated, but suddenly the screen went to the lock screen and then the logo screen and it keeps doing that. i tried resetting but its unresponsive. is this a common issue with ipad and whats wrong with it? i was checking the AccuWeather app when this happened and my battery was full if that helps. thanks
Thank You, thank You ...so much......that feature made me crazy!
Ocean20 wrote:
This can be turned off in settings/accessibility/zoom. Then on the next screen turn off -
Does anyone have a PPC mini that goes to sleep based on the timer?
Problem is that my mini won't go into sleep mode per the set minutes on the system preferences energy pane. I've searched and read the other posts on this.
Configuration is PPC mini, Apple USB keyboard, Microsoft intellimouse, and Eizo CRT display. No bluetooth or other hardware. Latest Microsoft mac mouse driver (had same issue without current Microsoft driver). Hardware test doesn't show any problems, and there's nothing to indicate any hardware issues. Latest OS X update was done with the combo updater. Have reset the power management unit (PMU). Have not called Apple yet.
With the sleep settings set on the energy saver pane, I've tried detaching the keyboard and mouse, together and individually, and that didn't change anything. What happens is that the display will shut off at the appointed time, however, the mini won't enter itself into sleep mode. I can manually put it to sleep by clicking blue apple, sleep or by pushing the power button.
I'm scratching my head on this.....so I don't take it personally, does anyone have a mini that does go into sleep as scheduled? Appreciate any suggestions on anything else to look at.Doug,
I had already started along that path, by removing the Microsoft mouse driver (which didn't fix the problem). However, starting the system in safe mode was a good baseline, as it went to sleep as it should - confirming a software-related issue.
I figured it would actually be easiest to shoot this bug by starting from scratch with an erase and install. After each tweak (ie, turn firewall on), software add (ie, clamXav), or update to the system, I tested it's sleep ability. And I found the bug/issue.....checking 'enable firewall logging' under the advanced options on the firewall tab, in the sharing preferences pane. No kidding. Stealth mode and UDP can be checked, just not firewall logging. Dunno why, however, the world is now at peace, able to sleep as needed. -
ORA-12709: error while loading create database character set after upgrade
Dear All
i m getting ORA-12709: error while loading create database character set, After upgraded the database from 10.2.0.3 to 11.2.0.3 in ebusiness suit env.
current application version 12.0.6
please help me to resolve it.
SQL> startup;
ORACLE instance started.
Total System Global Area 1.2831E+10 bytes
Fixed Size 2171296 bytes
Variable Size 2650807904 bytes
Database Buffers 1.0133E+10 bytes
Redo Buffers 44785664 bytes
ORA-12709: error while loading create database character set
-bash-3.00$ echo $ORA_NLS10
/u01/oracle/PROD/db/teche_st/11.2.0/nls/data/9idata
export ORACLE_BASE=/u01/oracle
export ORACLE_HOME=/u01/oracle/PROD/db/tech_st/11.2.0
export PATH=$ORACLE_HOME/bin:$ORACLE_HOME/perl/bin:$PATH
export PERL5LIB=$ORACLE_HOME/perl/lib/5.10.0:$ORACLE_HOME/perl/site_perl/5.10.0
export ORA_NLS10=/u01/oracle/PROD/db/teche_st/11.2.0/nls/data/9idata
export ORACLE_SID=PROD
-bash-3.00$ pwd
/u01/oracle/PROD/db/tech_st/11.2.0/nls/data/9idata
-bash-3.00$ ls -lh |more
total 56912
-rw-r--r-- 1 oracle oinstall 951 Jan 15 16:05 lx00001.nlb
-rw-r--r-- 1 oracle oinstall 957 Jan 15 16:05 lx00002.nlb
-rw-r--r-- 1 oracle oinstall 959 Jan 15 16:05 lx00003.nlb
-rw-r--r-- 1 oracle oinstall 984 Jan 15 16:05 lx00004.nlb
-rw-r--r-- 1 oracle oinstall 968 Jan 15 16:05 lx00005.nlb
-rw-r--r-- 1 oracle oinstall 962 Jan 15 16:05 lx00006.nlb
-rw-r--r-- 1 oracle oinstall 960 Jan 15 16:05 lx00007.nlb
-rw-r--r-- 1 oracle oinstall 950 Jan 15 16:05 lx00008.nlb
-rw-r--r-- 1 oracle oinstall 940 Jan 15 16:05 lx00009.nlb
-rw-r--r-- 1 oracle oinstall 939 Jan 15 16:05 lx0000a.nlb
-rw-r--r-- 1 oracle oinstall 1006 Jan 15 16:05 lx0000b.nlb
-rw-r--r-- 1 oracle oinstall 1008 Jan 15 16:05 lx0000c.nlb
-rw-r--r-- 1 oracle oinstall 998 Jan 15 16:05 lx0000d.nlb
-rw-r--r-- 1 oracle oinstall 1005 Jan 15 16:05 lx0000e.nlb
-rw-r--r-- 1 oracle oinstall 926 Jan 15 16:05 lx0000f.nlb
-rw-r--r-- 1 oracle oinstall 1.0K Jan 15 16:05 lx00010.nlb
-rw-r--r-- 1 oracle oinstall 958 Jan 15 16:05 lx00011.nlb
-rw-r--r-- 1 oracle oinstall 956 Jan 15 16:05 lx00012.nlb
-rw-r--r-- 1 oracle oinstall 1005 Jan 15 16:05 lx00013.nlb
-rw-r--r-- 1 oracle oinstall 970 Jan 15 16:05 lx00014.nlb
-rw-r--r-- 1 oracle oinstall 950 Jan 15 16:05 lx00015.nlb
-rw-r--r-- 1 oracle oinstall 1.0K Jan 15 16:05 lx00016.nlb
-rw-r--r-- 1 oracle oinstall 957 Jan 15 16:05 lx00017.nlb
-rw-r--r-- 1 oracle oinstall 932 Jan 15 16:05 lx00018.nlb
-rw-r--r-- 1 oracle oinstall 932 Jan 15 16:05 lx00019.nlb
-rw-r--r-- 1 oracle oinstall 951 Jan 15 16:05 lx0001a.nlb
-rw-r--r-- 1 oracle oinstall 944 Jan 15 16:05 lx0001b.nlb
-rw-r--r-- 1 oracle oinstall 953 Jan 15 16:05 lx0001c.nlb
Starting up:
Oracle Database 11g Enterprise Edition Release 11.2.0.3.0 - 64bit Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options.
ORACLE_HOME = /u01/oracle/PROD/db/tech_st/11.2.0
System name: SunOS
Node name: proddb3.zakathouse.org
Release: 5.10
Version: Generic_147440-19
Machine: sun4u
Using parameter settings in server-side spfile /u01/oracle/PROD/db/tech_st/11.2.0/dbs/spfilePROD.ora
System parameters with non-default values:
processes = 200
sessions = 400
timed_statistics = TRUE
event = ""
shared_pool_size = 416M
shared_pool_reserved_size= 40M
nls_language = "american"
nls_territory = "america"
nls_sort = "binary"
nls_date_format = "DD-MON-RR"
nls_numeric_characters = ".,"
nls_comp = "binary"
nls_length_semantics = "BYTE"
memory_target = 11G
memory_max_target = 12G
control_files = "/u01/oracle/PROD/db/apps_st/data/cntrl01.dbf"
control_files = "/u01/oracle/PROD/db/tech_st/10.2.0/dbs/cntrl02.dbf"
control_files = "/u01/oracle/PROD/db/apps_st/data/cntrl03.dbf"
db_block_checksum = "TRUE"
db_block_size = 8192
compatible = "11.2.0.0.0"
log_archive_dest_1 = "LOCATION=/u01/oracle/PROD/db/apps_st/data/archive"
log_archive_format = "%t_%s_%r.dbf"
log_buffer = 14278656
log_checkpoint_interval = 100000
log_checkpoint_timeout = 1200
db_files = 512
db_file_multiblock_read_count= 8
db_recovery_file_dest = "/u01/oracle/fast_recovery_area"
db_recovery_file_dest_size= 14726M
log_checkpoints_to_alert = TRUE
dml_locks = 10000
undo_management = "AUTO"
undo_tablespace = "APPS_UNDOTS1"
db_block_checking = "FALSE"
session_cached_cursors = 500
utl_file_dir = "/usr/tmp"
utl_file_dir = "/usr/tmp"
utl_file_dir = "/u01/oracle/PROD/db/tech_st/10.2.0/appsutil/outbound"
utl_file_dir = "/u01/oracle/PROD/db/tech_st/10.2.0/appsutil/outbound/PROD_proddb3"
utl_file_dir = "/usr/tmp"
plsql_code_type = "INTERPRETED"
plsql_optimize_level = 2
job_queue_processes = 2
cursor_sharing = "EXACT"
parallel_min_servers = 0
parallel_max_servers = 8
core_dump_dest = "/u01/oracle/PROD/db/tech_st/10.2.0/admin/PROD_proddb3/cdump"
audit_file_dest = "/u01/oracle/admin/PROD/adump"
db_name = "PROD"
open_cursors = 600
pga_aggregate_target = 1G
workarea_size_policy = "AUTO"
optimizer_secure_view_merging= FALSE
aq_tm_processes = 1
olap_page_pool_size = 4M
diagnostic_dest = "/u01/oracle"
max_dump_file_size = "20480"
Tue Jan 15 16:16:02 2013
PMON started with pid=2, OS id=18608
Tue Jan 15 16:16:02 2013
PSP0 started with pid=3, OS id=18610
Tue Jan 15 16:16:03 2013
VKTM started with pid=4, OS id=18612 at elevated priority
VKTM running at (10)millisec precision with DBRM quantum (100)ms
Tue Jan 15 16:16:03 2013
GEN0 started with pid=5, OS id=18616
Tue Jan 15 16:16:03 2013
DIAG started with pid=6, OS id=18618
Tue Jan 15 16:16:03 2013
DBRM started with pid=7, OS id=18620
Tue Jan 15 16:16:03 2013
DIA0 started with pid=8, OS id=18622
Tue Jan 15 16:16:03 2013
MMAN started with pid=9, OS id=18624
Tue Jan 15 16:16:03 2013
DBW0 started with pid=10, OS id=18626
Tue Jan 15 16:16:03 2013
LGWR started with pid=11, OS id=18628
Tue Jan 15 16:16:03 2013
CKPT started with pid=12, OS id=18630
Tue Jan 15 16:16:03 2013
SMON started with pid=13, OS id=18632
Tue Jan 15 16:16:04 2013
RECO started with pid=14, OS id=18634
Tue Jan 15 16:16:04 2013
MMON started with pid=15, OS id=18636
Tue Jan 15 16:16:04 2013
MMNL started with pid=16, OS id=18638
DISM started, OS id=18640
ORACLE_BASE from environment = /u01/oracle
Tue Jan 15 16:16:08 2013
ALTER DATABASE MOUNT
ORA-12709 signalled during: ALTER DATABASE MOUNT...ORA-12709 signalled during: ALTER DATABASE MOUNT...Do you have any trace files generated at the time you get this error?
Please see these docs.
ORA-12709: WHILE STARTING THE DATABASE [ID 1076156.6]
Upgrading from 9i to 10gR2 Fails With ORA-12709 : Error While Loading Create Database Character Set [ID 732861.1]
Ora-12709 While Trying To Start The Database [ID 311035.1]
ORA-12709 when Mounting the Database [ID 160478.1]
How to Move From One Database Character Set to Another at the Database Level [ID 1059300.6]
Thanks,
Hussein
Maybe you are looking for
-
I thouhgt I set up ITunes to store my library on the external drive. However, I recently sound out that the library is stored on my main C drive. Is there someway to move the library to the exernal drive and still have everything function correctly
-
Printing problems with HP Photosmart Premium C310a series
I recently installed an HP Photosmart Premium C310a series printer. Now the printer takes about 45 minutes to print a document. HP support says this is an Apple problem. Can anyone help?
-
What's wrong with my State Machine structure? I'm new to LabView
I've been recently introduced to LabView, and in my current project I've created an "Enum Constant" with 9 items. Le'ts say, for example, each item says: "First Item" "Second Item" "Third Item" ...etc then I created a case structure, and used the "Ad
-
BI Content patch level on BI system and source system
Hi all, hope you can help our BI and ECC6 systems are separated. My question is, do we need to be on the same BI_CONT patch level in BI and ECC6? Our current patch level in BI is 7.0.3 level 9 and in ECC6 we have not loaded any patches, however we ha
-
Photoshop Elements5 - is there a File Browser?
Photoshop Elements3 has a wonderful slide sorter with nice features for batch re-naming files - the File Browser. I can not find a similar set of features in Elements5. I can sort pictures in a collection, but I can't see the file name and I can't re