While loading data Runtime error MOVE_TO_LIT_NOTALLOWED_NODATA

Dear Masters
While loading data from r/3 to PSA only, I am getting below error
Error message from the source system
Diagnosis
An error occurred in the source system.
System Response
Caller 09 contains an error message.
Further analysis:
The error occurred in Extractor .
Refer to the error message.
Procedure
How you remove the error depends on the error message.
Note
If the source system is a Client Workstation, then it is possible that the file that you wanted to load was being edited at the time of the data request. Make sure that the file is in the specified directory, that it is not being processed at the moment, and restart the request.
There is no long text, when I clicked Error message, I got below message only
    <b> Job terminated in source system   > Request set to red</b>
In r/3 side in st22, I got below runtime errors
Runtime Errors         <b>MOVE_TO_LIT_NOTALLOWED_NODATA</b>
Short text
    Error at assignment: Overwritten protected field.
any other sap notes to fix this issue
Please help me to resolve below issue
Thanks in advance
Raja S

Hi Raja,
Your error message suggests that there is some overlapping of the filed while you have done the mapping and at the time of extraction this particular field is being tried to be overwritten by some other mapping which is not possible.
Check in your mappings again and load it.
Cheers!
Amit

Similar Messages

Short Dump when loading data (Runtime Error ITAB_DUPLICATE_KEY) Urgent Pls

Dear Guru
We are loading data into (2 ODS and ! Cube) from one Infopkg.
When i do delta update it throws following error
(for one ODS it is green) and for another ODS and CUBE it is red.
Runtime Error          ITAB_DUPLICATE_KEY
What happened?
Error in ABAP application program.
The current ABAP program "GP229LMXTFYDS5X6UC3ND03NIV2" had to be terminated
because one of the
statements could not be executed.
Please suggest me some solution, i am with client..its a serious issue now.
Hope you understand
Thanks in Adv
Dev

hi,
hope if you retrigger the load it would be successful.
force the request status to red and delete from the all target and retrigger the load.
else chk if in the detail tab u could find the data upto PSa. if so delete the red request alone and pull the records to tohose records from PSA.
Ramesh

Runtime error while loading data in BI 7.0

Hi All,
While loading data in BI 7.0,
I am getting Runtime Errors "TSV_TNEW_PAGE_ALLOC_FAILED" . No more space available for extending internal table.
As per SAP BASIS SUPPORT comments:
"This is NOT a space problem but rather a huge memory resource consumption one, as you're trying to hold excessive amount of data in Memory, and that's when you get the short dump; I know that SAP sometimes is not clear in explaining the issue (ie "No more storage space available...."), but this refers to memory requirement, not disk storage space per se.
So, please try to break down your data load in smaller sets and this will work OK"
How to proceed with the above comments? How to break down data load in to smaller sets?
Please helpme....

there could be various ways -
using selections / filters in Infopackage / DTPs based on may be some period or some other char you could identify based on your data.
Hope it helps
Vikash

Integration Error in ODI while loading data to HFM application

Hello All,
I am performing a integration from source(Flat file) i.e example.csv to classic HFM application I have created an Integration and while loading the data with the all options provided, and if you see these Properties [CLEAR_ALL_METADATA_BEFORE_LOAD, REPLACE_MODE] are mandatory,which is getting as error as properties are not set
these properties are(as a options) is given in the IKM SQL to Hyperion Financial MetaData, but here I am using IKM SQL to Financial Management Data.
I get the following error:-
org.apache.bsf.BSFException: exception from Jython:
Traceback (most recent call last):
File "<string>", line 3, in <module>
    at com.hyperion.odi.hfm.ODIHFMAppWriter.loadData(ODIHFMAppWriter.java:240)
    at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
    at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
    at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
    at java.lang.reflect.Method.invoke(Method.java:597)
com.hyperion.odi.common.ODIHAppException: com.hyperion.odi.common.ODIHAppException: Properties [CLEAR_ALL_METADATA_BEFORE_LOAD, REPLACE_MODE] are mandatory.
    at org.apache.bsf.engines.jython.JythonEngine.exec(JythonEngine.java:146)
    at com.sunopsis.dwg.codeinterpretor.SnpScriptingInterpretor.execInBSFEngine(SnpScriptingInterpretor.java:322)
    at com.sunopsis.dwg.codeinterpretor.SnpScriptingInterpretor.exec(SnpScriptingInterpretor.java:170)
    at com.sunopsis.dwg.dbobj.SnpSessTaskSql.scripting(SnpSessTaskSql.java:2472)
    at oracle.odi.runtime.agent.execution.cmd.ScriptingExecutor.execute(ScriptingExecutor.java:47)
    at oracle.odi.runtime.agent.execution.cmd.ScriptingExecutor.execute(ScriptingExecutor.java:1)
    at oracle.odi.runtime.agent.execution.TaskExecutionHandler.handleTask(TaskExecutionHandler.java:50)
    at com.sunopsis.dwg.dbobj.SnpSessTaskSql.processTask(SnpSessTaskSql.java:2913)
    at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTask(SnpSessTaskSql.java:2625)
    at com.sunopsis.dwg.dbobj.SnpSessStep.treatAttachedTasks(SnpSessStep.java:577)
    at com.sunopsis.dwg.dbobj.SnpSessStep.treatSessStep(SnpSessStep.java:468)
    at com.sunopsis.dwg.dbobj.SnpSession.treatSession(SnpSession.java:2128)
    at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor$2.doAction(StartSessRequestProcessor.java:366)
    at oracle.odi.core.persistence.dwgobject.DwgObjectTemplate.execute(DwgObjectTemplate.java:216)
    at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor.doProcessStartSessTask(StartSessRequestProcessor.java:300)
    at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor.access$0(StartSessRequestProcessor.java:292)
    at oracle.odi.runtime.agent.processor.impl.StartSessRequestProcessor$StartSessTask.doExecute(StartSessRequestProcessor.java:855)
    at oracle.odi.runtime.agent.processor.task.AgentTask.execute(AgentTask.java:126)
    at oracle.odi.runtime.agent.support.DefaultAgentTaskExecutor$2.run(DefaultAgentTaskExecutor.java:82)
    at java.lang.Thread.run(Thread.java:662)
Caused by: Traceback (most recent call last):
File "<string>", line 3, in <module>
    at com.hyperion.odi.hfm.ODIHFMAppWriter.loadData(ODIHFMAppWriter.java:240)
    at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
    at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
    at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
    at java.lang.reflect.Method.invoke(Method.java:597)
com.hyperion.odi.common.ODIHAppException: com.hyperion.odi.common.ODIHAppException: Properties [CLEAR_ALL_METADATA_BEFORE_LOAD, REPLACE_MODE] are mandatory.
    at org.python.core.PyException.fillInStackTrace(PyException.java:70)
    at java.lang.Throwable.<init>(Throwable.java:181)
    at java.lang.Exception.<init>(Exception.java:29)
    at java.lang.RuntimeException.<init>(RuntimeException.java:32)
    at org.python.core.PyException.<init>(PyException.java:46)
    at org.python.core.PyException.<init>(PyException.java:43)
    at org.python.core.Py.JavaError(Py.java:455)
    at org.python.core.Py.JavaError(Py.java:448)
    at org.python.core.PyReflectedFunction.__call__(PyReflectedFunction.java:177)
    at org.python.core.PyObject.__call__(PyObject.java:355)
    at org.python.core.PyMethod.__call__(PyMethod.java:215)
    at org.python.core.PyMethod.instancemethod___call__(PyMethod.java:221)
    at org.python.core.PyMethod.__call__(PyMethod.java:206)
    at org.python.core.PyObject.__call__(PyObject.java:397)
    at org.python.core.PyObject.__call__(PyObject.java:401)
    at org.python.pycode._pyx15.f$0(<string>:6)
    at org.python.pycode._pyx15.call_function(<string>)
    at org.python.core.PyTableCode.call(PyTableCode.java:165)
    at org.python.core.PyCode.call(PyCode.java:18)
    at org.python.core.Py.runCode(Py.java:1204)
    at org.python.core.Py.exec(Py.java:1248)
    at org.python.util.PythonInterpreter.exec(PythonInterpreter.java:172)
    at org.apache.bsf.engines.jython.JythonEngine.exec(JythonEngine.java:144)
    ... 19 more
Caused by: com.hyperion.odi.common.ODIHAppException: Properties [CLEAR_ALL_METADATA_BEFORE_LOAD, REPLACE_MODE] are mandatory.
    at com.hyperion.odi.hfm.ODIHFMAppWriter.loadData(ODIHFMAppWriter.java:240)
    at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
    at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
    at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
    at java.lang.reflect.Method.invoke(Method.java:597)
    at org.python.core.PyReflectedFunction.__call__(PyReflectedFunction.java:175)
    ... 33 more
Caused by: com.hyperion.odi.common.ODIHAppException: Properties [CLEAR_ALL_METADATA_BEFORE_LOAD, REPLACE_MODE] are mandatory.
    at com.hyperion.odi.hfm.ODIHFMUtil.validateRequiredProperties(ODIHFMUtil.java:87)
    at com.hyperion.odi.hfm.ODIHFMMetadataLoader$OptionsMetadataLoad.validate(ODIHFMMetadataLoader.java:66)
    at com.hyperion.odi.hfm.ODIHFMMetadataLoader.validateOptions(ODIHFMMetadataLoader.java:188)
    at com.hyperion.odi.hfm.ODIHFMAppStatement.validateLoadOptions(ODIHFMAppStatement.java:168)
    at com.hyperion.odi.hfm.ODIHFMAppWriter.loadData(ODIHFMAppWriter.java:195)
    ... 38 more

Hi Ujjwal,
I remember Pratik had same issues and he resolved it.
Re: ODI Error while loading data to Classic HFM Application
Hope that fix your issue.
Bhabani

Error While loading data for LIS InfoSources.

Hi All,
I am repeatedly receiving load failure errors while loading data using 2lis_01_s001 (This is the case with all the InfoSources).
The error message is:
An error occurred in the source system.
Note
If the source system is a Client Workstation, then it is possible that the file that you wanted to load was being edited at the time of the data request. Make sure that the file is in the specified directory, that it is not being processed at the moment, and restart the request.
in our Quality system, we disabled the LIS Updation to No Update(R3) and loaded data and then again changed the Update Mode for No Updating to Asynchronous Update(R3). But now we are doing dataloading in Production. How to proceed. Should we have to disable the LIS Updating whenever we have to load the loads from R3 to BW.
Regards
Jay

Hi Jayanthy,
Pls. check the order of the fields in the two set up tables for the S001 structure. The order of fields in both the tables should be the same.
You can see the structure in the TCode - SE11.
If the order is different, then you bneed to ask the BASIS person to change the order so that the order of fields in both the setup tables is same. This should fix the issue.
Thanks,
Raj

Error while loading data into External table from the flat files

HI ,
We have a data load in our project which feeds the oracle external tables with the data from the Flat Files(.bcp files) in unix.
While loading the data, we are encountering the following error.
Error occured (Error Code : -29913 and Error Message : ORA-29913: error in executing ODCIEXTTABLEOPEN callout
ORA-29400: data cartridge error
KUP-04063: un) while loading data into table_ext
Please let us know what needs to be done in this case to solve this problem.
Thanks,
Kartheek

Kartheek,
I used Google (mine still works).... please check those links:
http://oraclequirks.blogspot.com/2008/07/ora-29400-data-cartridge-error.html
http://jonathanlewis.wordpress.com/2011/02/15/ora-29913/
HTH,
Thierry

Error while loading data from application server

Hi all,
Am facing a problem while loading data from application server.
The error i get is ....
*" The argument ' Rental/Lease ' cannot be interpreted as a number while assigning character to application structure*.
'Rental/Lease' is a value for a character infoobject length 30. I checked for the sequence of fields in data source and the sequnce of values am receiving in application server and the sequence match.
when i copy these values into a CSV onto a desktop and load,load is successful.
Please let me know your views.
Thanks&Regards,
Praveen

It looks like the system is trying to convert Rental/Lease to a number format. Is the info object type CHAR or NUMC or ??? I would look there.
Also, make sure / is in RSKC.
Brian

Error while loading data from R/3 to PSA

Hi,
While loading data from R/3 to PSA i am getting error 'the argument 0.6 j cannot be interpreted as a number when assing application structure.Actually in R/3 0.6 and JPY are 2 different columns.So when loading J is getting concatenated with 0.6,so i think i am getting this error.
Hope i am clear.
please help me to resolve this issue.
Thanks in Advance,
Girish

Hi,
U have to go thru the note and chk/compare the settings with ur system...i.e packages, levels...
If not take the assistance from BASIS...
Note; And also all the notes may not be the exact note tht matches ur issue always...its jst a comparision within our system...If it doesn't solve our issue we have to search for another alternative...
rgds,

Error while loading data from ECC to BI

Hi BW Experts,
while loading data from ECC 6.0 to BI i got error in details tab of the infopackage as datapackage 1 arrived in bw processing not yet finished.
Could any one help me out?
Thanks

Amar,
please check the source system job status. If its successfully completed then we can expect data load sucess in BW side.
to check source system status: RSMO> select related load>in Menu Environment-->Job overview in source system.
once this over check the TRFC or IDocs struck
if TRFC, chk in TCode-SM58 or from environment select TRFC from source/data warhouse.
if you are finding TRFcs are in stuck just select and run manually to complete.
M

Error while loading data from FDM (EPM 11.1.1.3)

Hi,
We are loading data into HFM from FDM. While loading data from FDM it is throwing an error which as below.
"Load data started: 5/20/2012 9:30:45 PM
Line 27, Error: Cell for Period Mar is not an input cell.
Actual,2011,Mar,YTD,ENT_JJ,JPY,A23232323,ENT_J76;[None];[None];[None];ICP_Load;3463437"
There were multiples lines which are throwing error.
After doing some checking we found that when we unpost ICP data in HFM we were able to load data from FDM. We have not locked the ICP entities because that will restrcit to load data. But we are not able to understand just unposting the ICP values why we are able to load data from FDM. Also we have not closed the period in HFM.
Kindly suggest, what could be the possible reason.
Thanks
Edited by: user12121146 on May 27, 2012 5:29 AM

one way to figure this out, would be to open a grad at the same POV.
It will rule out a couple things.
If it is locked, you'll visually see that it is locked. (will be grey I believe)
If it is an invalid intersection, you'll see that as well. (will be red)
If you do not have access to the cell, you will see that if you look at cell status, it will say NO ACCESS.
That should help you figure out what is happening, the quick and dirty way.

Error while loading data from a file on application server

Hi all,
Facing an error while loading data from a flat file.
Error 'The argument '##yyyymmdd;@##' cannot be interpreted as a number ' while assigning character.
I changed the format of date fields (tried with number,general,date(International))in the xls. But i still get the same error.Did check all the data types in Data source all the fields are dats.
Can you please tell me what could be the problem?
Thank you all,
Praveen

Hi all,
As far as my first question i got through it but i had one more field in my flat file while actually is a time stamp, but in my flat file i have a data in this format
10/21/2006 5:11:48 AM which i need to change to 10/21/2006
one more note is i have some of the fields as NULL in this field
Last Updated Date
10/21/2006 5:11:48 AM
10/21/2006 5:11:48 AM
NULL
NULL
10/21/2006 5:11:48 AM
NULL
I want to display the values as 10/21/2006 and NULL as it is.
Please let me know if we have a conversion routine in datasource which can solve my problem.
Regards,
Praveen

Error while loading data after level 17 patch

Hi all,
A week ago we had patch level 17 implemented on our SAP NetWeaver BI 7.0 system. Since then, we cannot load any data to some cubes using update rules. We get "Error when generating the update program" (Message no. RSAU484), status red while loading data.
I tried activating the update rules
We get te same error when loading data from a DSO into a cube.
The strange thing is that it doesn't happen for all the objects in the system. We have troubles loading deltas from 2LIS_12_VCITM (delivery items), 2LIS_13VAITM (sales order items) and from a BI content DSO in assets accountng.
Please if you have any idea or if this happend to you, i appreciate any suggestion.
This is not an implementation, these processes are already live for months, and we didtn't have any problems before the patch..
thanks,
Andreea

We ran into same issue & another one during our BI 7.0 SPS15/SP17 upgrade.
The solution:
1. Apply 2 notes:
[Note 1146851 - BI 7.0 (SP 18): Error RSAU 484 when generating update|http://service.sap.com/sap/support/notes/1146851]
[Note 1152453 - Termination generating InfoCube write program|http://service.sap.com/sap/support/notes/1152453]
2. Then run program RSDD_RSTMPLWIDTP_GEN_ALL
to generate the new programs for InfoCubes from the template RSTMPLWIDTP and cleans up the staging table RSUPDINFO per note 1152453.

Error while loading data from R/3 into DSO

Hi,
While loading data from 2lis_02_s012 into a DSO the following error occured:
=============================================
Diagnosis
    Updating for the information structure is still activated in client 150
    (and possibly also in other clients).
System Response
    o   It is not possible to upload data in the initial mode.
    o   Generation of the delta update was terminated.
Procedure
    1. Switch off updating in all system clients.
    2. Repeat the relevant activity.
=============================================
Anyone plz help me in solving the issue.
Thanks & Regards,
VN.

Hi VN,
1. Incase you do full update , system will allow you to load without any error.
2. In case you want to do init then
      Lock users
      Stop the update in the system .
      Load init Package
      Start the update
      Unlock users.
      Load delta package.
Hope it helps.
Regards
Mr Kapadia

Error while loading data from DS into cube

Hello All
I am getting the below error while loading data from Data source to the cube.
Record 1 :Time conversion from 0CALDAY to 0FISCPER (fiscal year ) failed with value 20070331
Wht am i suppose to do?
Need ur input in this regard.
Regards
Rohit

Hi
Simply map 0calday to 0fiscper(you already done it)..You might have forgotten to map fiscal year variant in update rules....if it comes from souce,just map it..if it won't comes from source...make it as constant in update rules and give value..
If your business is April to March make it as 'V3'
If your business is January to Decemeber make it as 'K4'..
activate your update rules delete old data and upload again....
Hope it helps
Thanks
Teja

Error while loading data from 0FI_TX_4 to ODS

Dear Friends,
One of our proccess chain getting error since a week, every day with same error while loading data from R3 data source 0FI_TX_4 to ODS.
Short dump is raised in R3 system.
"DBIF_RSQL_SQL_ERROR" CX_SY_OPEN_SQL_DBC
"SAPLBWFIR" or "LBWFIRU13"
"BWFIR_READ_BSET_CPUDT_DATA"
ORA-01555
The number of records are below 10000 only.
All other chains are OK.
we have already searched SDN and Notes...and applied below solution, but still no use
Increase the size of all the roll back segments
Increase number of REDO logs
Decrease the number of records per data packet
Any more suggessions please ??
Thanks
Tony

How are you telling that no. of records are below 10000 .Have you checked the no.of records in PSA???
Now ,I tell you something which I had done for this error .I increased the Package size such that whole data gets transferred in single data package.Please make the package size as large as possible so that all the data can be processed in single package.
I know you have read so many threads on the same but what I am suggesting is what I have done and successfully rectified this issue.
regards,
rocks

While loading data Runtime error MOVE_TO_LIT_NOTALLOWED_NODATA

Similar Messages

Maybe you are looking for