While loading master data to infoobject Load failed due to Duplicate record

Hi Experts,
While loading master data to the infoobject load failed .
The error it is showing is 24 Duplicate record found. 23 recordings used in table.
Pls help me to solve this issue
Thanks in Advance.
Regards,
Gopal.

In infopackage settings u will find a checkbox for 'delete duplicate records'.
I think it appears beside the radio button for 'To PSA',and also tick checkbox for 'subsequent update to data targets'.
This will remove the duplicate records(if any) from the PSA before they are processed further by transfer and update rules.
Use this and reload master data.
cheers,
Vishvesh

Similar Messages

Caller-70 Error while loading master data into infoobject

hi ,
I am getting following error while loading master data into infoobject (0tb-account). I am loading this master data in production environment for the first time. there are about 300000 records. All have got loaded upto PSA. Infopackage settings were PSA and then into data target.
Short dump in the Warehouse
Diagnosis
The data update was not finished. A short dump has probably been logged in BI. This provides information about the error.
System Response
"Caller 70" is missing.
ST22 dump analysis is as below:
Termination occurred in the ABAP program "GP476CZYBEF2WX53UZ8TXFG6XOS" - in
"VALUE_TO_SID_CONVERT_DB".
The main program was "RSMO1_RSM2 ".
Please help as soon as you can..Production problem....
Regards
Rakesh

Hi rakesh,
May be IDOCs not processed completely,
Idoc Problem, Either wait till time out & process Idoc from detail monitor screen, or go to BD87 & process Idoc with status = YELLOW ( be careful while processing IDOCS from BD87, choose only relevant Idocs
Cheers
Raj

Why we load Master data first before loading Transaction data

Hi Experts,
why we load Master data first before loading Transaction data, specify any reasons for that ? Is it mandatory to load MD first ?
I will allocate points to those who help me in detail. My advance thanks who respond to my query.
Edited by: Nagireddy Pothireddy on Mar 10, 2008 8:17 AM

Hi Nagireddy,
I hope this helps....
The bottom line for building cubes it to view facts against dimensions. When i say facts these are the key-figures i.e sales volume, Sales vat etc against some characteristics like sales Area, Cost center , plant.
Basically charateristics are those against which key-figures are measures like Costcenter, plant, material etc.
Dimensions are a grouping of related characteristic. So basically a cube has a central fact table with dimesions associated to it in a relational schema. Imagine now you want to view a key figure Sales Volume against a dimension plant. when you consider plant , it has a distribution channel, purchasing organisation , company code, sales area, region etc associated with it. So which form the attributes of plant and also have some or the other description (texts) and aslo hierarchy. first we load the master data and then the transaction data follows.

To load master data into infoobject 0mat_unit

Hi Experts,
Cud you pls give me any idea to load master data into infoject 0mat_unit from R/3.
We need more than 10,000 master data into 0mat_unit. How can I collect data from R/3 for different attributes of infoobject 0mat_unit?
I will assign full points for suitable solution.
Thanks in advance!
Sapna

Hi Sapna,
See
<a href="http://help.sap.com/saphelp_nw04s/helpdata/en/e3/e60138fede083de10000009b38f8cf/frameset.htm">DataSource in the SAP Source System</a>
Udo

Loading master data compounded infoobject

Hello experts
I want to load master data into an InfoObject from a flat file, thus i want to define this infoobject as an infoprovider
In order to do that i use the "Insert characteristic as InfoProvider" option from the InfoArea but i get a message :
InfoObject PA_PAPRCT is not a basis characteristic; not used as data target
This InfoObject has a superior InfoObject defined as superior InfoObject in the compounding tab, is that the problem ?
Thanks for your help and happy new year
Thibault

Dear Thibault
Yes, PA_PAPRCT is not the basic characteristic.
Instead of this, use the superior object for this object.
Than you can load the master data for all these objects.
Hope now you will get the idea
Regards
Saravanan.ar

Master data load failed due to duplicate records .

hello friends ,
need some help .
I am loading the master data from soruce sys , and it is throwing error of duplicate 56 records.
I repeated the step , but found the same error once again .
i could not find out the duplicate record , as thr are more than 24000 records , and in this 56 are duplicate . and this duplicate also looks like same.
when i click on error records , it is showing me the below procedure .
maintain the attribute in Psa SCREEN .
I could not find the duplicate records , could you please let me know how can i maintain this .
Regards

Hi ,
Reload the masterdata by cheking ignoreduplicate records check box.since the master data has overwriting capability the duplicate records will be overwritten
cheers,
Swapna.G

Data Load Fails due to duplicate records from the PSA

Hi,
I have loaded the Master Data Twice in to the PSA. Then, I created the DTP to load the data from the PSA to the InfoProvider. The data load is failing with an error "duplicate key/records found".
Is there any setting that I can configure by which even though I have duplicate records in PSA, I can be successfully able to load only one set of data (without duplicates) in to the InfoProvider?
How can I set up the process chains to do so?
Your answer to the above two questions is appreciated.
Thanks,

Hi Sesh,
There are 2 places where the DTP checks for duplicates.
In the first, it checks previous error stacks. If the records you are loading are still contained in the error stack of a previous DTP run, it will throw the error at this stage. In this case you will first have to clean up the previous error stack.
The second stage will clean up duplicates across datapackeages, provided the option is set in your datasource. But you should note that this will not solve the problem if you have duplicates in the same datapackage. In that case you can do the filtering yourself in the start routine of your transformation.
Hope this helps,
Pieter

Error 0 update while loading master data

Hi,
Iam facing a problem while loading master data.Data has comes to PSA but it getting failed to load into infoobject it is showing the error " error in the 0 update".
Ihave tried for manual update, even though it is showing same problem .masterdata 0material is copy back from production to Quality.presently iam uploading data in quality.can anybody give your valuable suggestions.
Thanks & Regards,
Mahi.

I've a compounding characteristic in this characteristic.
And the master data loading was fine yesterday but today it doesn't work.
When I check with rsrv this characteristic, a dump with message:
Error in ABAP application program.
The current ABAP program "SAPLRRSI" had to be terminated because one of the
statements could not be executed.
This is probably due to an error in the ABAP program.
In program "GP47HH4A9VROVK98YR0TT9S7TQ5 ", the following syntax error occurred
in the Include "GP47HH4A9VROVK98YR0TT9S7TQ5 " in line 25:
"Field "/BIC/MZCATWRT" is unknown. It is neither in one of the specifie"
"d tables nor defined by a "DATA" statement. "DATA" statement."
So I think something is wrong in this Char.
But what can I do for that?
Thanks a lot for all idea.
Juan

What are the tables will update while loading Master data ?

Hello Experts,
What are the tables will update while loading Master data ? And requesting you to provide more information about Master data loading and its related settings in the beginning of creation infoobjects.

It depends upon the type of Master data u r loading....
In all the master data loadings, for every new value of master data an SID will be created in the SID table /BI*/S<INFOOBJECT NAME> irrespective of the type of master data.
But the exceptional tables that get updated depending on the type of master data are.....
If it is a time Independent master data then the /BI*/P<INFOOBJECT NAME> table gets updated with the loaded data.
If it is a time dependent master data then the /BI*/Q<INFOOBJECT NAME> table gets updated with the loaded data.
If the master data is of time Independent Navigational attributes then for every data load the SID table will get updated first and then the /BI*/X<INFOOBJECT NAME> table gets updated with the SID's created in the SID table (NOT WITH THE MASTER DATA).
If the master data is of time dependent navigational attributes then for every data load the SID table will get updated first and then the /BI*/Y<INFOOBJECT NAME> table gets updated with the SID's created in the SID table (NOT WITH THE MASTER DATA).
NOTE: As said above, For all the data in P, Q, T, X, Y tables the SID's will be created in the S table /BI*/S<INFOOBJECT NAME>
NOTE: Irrespective of the time dependency or Independency the VIEW /BI*/M<INFOOBJECT NAME> defined on the top of /BI*/P<INFOOBJECT NAME> & /BI*/Q<INFOOBJECT NAME> tables gives the view of entire master data.
NOTE: it is just a View and it is not a Table. So it will not have any physical storage of data.
All the above tables are for ATTRIBUTES
But when it comes to TEXTS, irrespective of the Time dependency or Independency, the /BI*/T<INFOOBJECT NAME> table gets updated (and of course the S table also).
Naming Convention: /BIC/*<InfoObject Name> or /BI0/*<InfoObject Name>
C = Customer Defined Characteristic
0 = Standard or SAP defined Characteristic
* = P, Q, T, X,Y, S (depending on the above said conditions)
Thanks & regards
Sasidhar

Error while loading master data.

I am facing error while loading master data in a infoobject.
The error comes when I run DTP fo rloading data from PSA to infoobject.
The error wordings are : "MCK_PRDT1 : Data record 1 ('Bleach '): Version 'Bleach ' is not valid"
Please help me in understanding this Version errror and suggest a solution for this.

SAP metodology integration MDM & BW you can look at:
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/b0f1f135-0015-2b10-5e83-acca118e17aa
You can turn matching strategy in MDM Data manager for delete dublicate of records
and then use MDM Syndicator for export data to file and then load that file to BW
If you use OHD you cannot load from BW to MDM repository 10 records and unload only 5 because
in BW every record has unique key.
also you can use MDM ABAP or Java API for delete dublicate of records
Edited by: Kanstantsin Chernichenka on May 8, 2009 1:02 PM

Error 194 while loading Master Data.

Hi,
I've a custom Info Object which has 0MATERIAL as an attribute. While trying to load master data to this custom info object using DBConnect , I'm getting the error:
RSDMD 194
0MATERIAL: Data record 1('0001003') : Version '1009841' is not valid.
I think it's a problem with conversion exit. But I'm not able to solve this problem. It would be of great help if you could guide me on how to overcome this.
Thanks in advance.
Regards
Hari

Hari,
I'm thinking for DB Connected datasources we have Propose Tab Page and Fileds Tab Page. In the Propose tab Page you can see data type and Format(internal or External or check). select external, put data type of your Material Infoobject Data type in the Propose Tab Page.
all the best.
Note: I'm thinking DB Connected Datasources got Propose Tab page. Please correct me if i'm wrong.
Regards,
Nagesh Ganisetti.
*Assign Points if it helps

36 duplicate record found. -- error while loading master data

Hello BW Experts,
Error while loading master data
( green light )Update PSA ( 50000 Records posted ) No errors
( green light )Transfer rules ( 50000 ³ 50000 Records ): No errors
( green light )Update rules ( 50000 ³ 50000 Records ): No errors
( green light ) Update ( 0 new / 50000 changed ): No errors
( red light )Processing end: errors occurred
     Processing 2 finished
Þ     36 duplicate record found. 15718 recordings used in table /BIC/PZMATNUM
Þ     36 duplicate record found. 15718 recordings used in table /BIC/XZMATNUM
This error repeats with all the data-packets.
what could be the reason of the error. how to correct the error.
Any suggestions appreciated.
Thanks,
BWer

BWer,
We have exactly the same issue when loading the infoobject 0PM_ORDER, the datasource is 0PM_ORDER_ATTR.
The workaround we have been using is 'Manual push' from the details tab of the monitor. Weirdly we don't have this issue in our test and dev systems, even in Production, this doesn't occur somedays. We have all the necessary settings enabled in the infopackage.
Did you figure out a solution for your issue, if so please let me know and likewise I will.
-Venkat

BPC Error while loading master data from SAP BW

Hello Guru,
I have NW BPC 7.5 installed on BW server. Currently i have started to work on one application where i have to load master data first. I am loading master data for cost center.
I looked into the process chain "BPC: Import BW InfoObject master data" and i found that few processes are in GREEN color and few are in RED color (Display). is that correct or not ? then as per some of the thread i went to "BPC: Convert BW infoObject master data" --> SOURCE_TYPE = IP and added one parameter "FORMULA_FILE_NO". Then i saved this process chain and activated it.
I created transformation file in BPC and it got created successfully but while i try to load packages it throws me error.
Q. Do i need to have entire process chain with all processes in GREEN to have the master data in BPC ?
Q. Do i need to activate any BADI's for this or not ?
I appreciate your help in advance. I trie

Hello Guru,
Currently i am getting below error while loading costcenter master data from BW to BPC.
Task name MASTER DATA SOURCE:
Record count: 189
Task name TEXT SOURCE:
Record count: 189
Task name CONVERT:
No 1 Round:
Info provider is not available
Application: ZRB_SALES_CMB Package status: ERROR
Anybody can tell me, if i have missed anything ???
Regards,
BI NEW
Edited by: BI NEW on Feb 23, 2011 12:25 PM

Strange error while loading master data

Hi,
Has anybody seen the following error while loading master data?
6 duplicate record found. 886 recordings used in table /BI0/XCOSTCENTER
6 duplicate record found. 886 recordings used in table /BI0/PCOSTCENTER
and repeat again once (so total 4 lines of error message)
The update mode is "PSA and then in the infoobject (Package by Package)"
Surprisingly the step by step error analysis shows all green except in step "Processing error in Warehouse reported?" which is red. The over all status i.e. Total and Technical are both red.
It all means something went wrong but with the step by step error analysis all green even in the parts like "Processing successfully finished" and "All reported data packet received" I am confused.
To make matter more confusing there are no error records in corresponding PSA data package.
any comments would be greatly appreciated.

Hi Novice,
In your InfoPackage > Processing tab, select the option Only PSA and Update subsequently into Data Target, and also add the check mark for Ignore double data records. Then try the load again...it should be okay.
Hope this helps...

Where to set lock while loading master data attributes

Hello Experts,
I have two different datasources from ECC which loads into 0CUST_SALES attributes. I'm using two different DTP & transformation which are loading data in the this infoobject attributes.
When i try to load data, the DTP fails with an error message at "Updating attributes for InfoObject 0CUST_SALES Processing Terminated" & the job log says: "Lock NOT set for: Loading master data attributes".
Here what exactly LOCK means?
Thanks in advance.
Zakir Khan.

Hi,
The lock means that some program is updating the master data (a table) and at the same time other program can not update that same master data. When the first program completes the updation it will release the lock so that the other program can update this.
In your case you and schedule the DTP one after another.
Thanks

While loading master data to infoobject Load failed due to Duplicate record

Similar Messages

Maybe you are looking for