While on Macbook Pro went to line bars now will not shut down and the only thing on the screen is the line bars. Help

While on mac the screen went to line bars and now that is all that you can see. It will not shut down. Pulled battery ans left it out for 3 hours. put it back in and it is still on the line bars.

http://support.apple.com/kb/HT1808

Similar Messages

  • Macbook Pro will not shut down AND other issues...

    Macbook Pro will not shut down. Not using the POWER button, not using control/alt/command/esc, not using force quit, and obviously not by selecting Sleep or Shut down from the Apple menu.
    Force quit will not even pop up when selected.
    Top row keys do not work either, have gone into settings and switched them to F keys and back again, no luck.
    iPhoto will not import photos and will not shut down, gives me a message stating it is importing photos (nothing is connected to computer though). Baffling.
    HELP! Computer is only a month old
    Thank you everyone xx

    Please make a Genius Appointment and take it in for service.

  • My MacBook pro did a firmware update now will not accept my password

    My Skype account was hacked so I changed the password for my computer too I did a firmware update the computer started up and went to a black screen asking for my password it does not accept the new or old passwords. I have tried resetting the password with the snow leopard install disc but it will not recognise it and ejects. Please help

    Try image capture (in your applications folder) - or the finder - if neither of these see the card uyou need to try a USB card reader - once you get yoru photos off use the camera format command to erase and reformat the card
    a best practice to is to never have any computer program (including iPhoto) delete the photos from the card but to import the photos and keep them and then after at least one successful backup cycle has completed and then reformat the card --  I use three very large (32 GB) cards in rotation so I do not reformat for typically a year or more giving me one more long term backup of my photos
    LN

  • Installed XP Pro - now will not shut down

    I have a PC using an MS-6534 Motherboard that WAS running Windows 98SE with no problems.
    For 'corporate' reasons the PC has been re-installed with XP Pro.
    Ever since XP was put on it the PC will not shutdown. It gets to "Windows is shutting down" and then hangs ... stops functioning! Reset it and it starts fine. If I RESTART it then it works fine. I even took it back to 98 thinking I had a 'new' harfware problem, but it shuts down fine.
    Can anyone give me some ideas of a) what is going on and b) how do I fix it?
    Thanks,
    Ciderapple

    OS X: How to quit an unresponsive application using Force Quit

  • My new iphone froze while verifying my e-mail address...it will not shut down...help?!

    my new iphone froze while varifying my e-mail address. It will not just down or do anything...did i get a lemon?
    please help!?

    I tried ti shut down and The...: Apple Support Communities

  • My MacBook Pro will not start up.  I only get a grey screen with the spinning wheel.  No blue page appears and the grey screen remains.  Tried starting with the Shift key but ineffective as well.

    Can't get my MacBook Pro to start up.  Have shut it down several times and tried restarting but all I get is a grey screen with the spinning icon.  Apple Support online suggested starting with power button followed immediately with the shift key.  Same results.  Also tried power button with shift key, command, and V.  Black screen appeared instead with lots of data language but still no starting.  This final page was suppose to result in an internal system check and restart but nothing happened and the black screen remains.Where do I go from here?  Scheduled for the Genius Bar tomorrow but would like to resolve this beforehand.

    You may be having a hardware problem that you cannot resolve on your own. Nevertheless...
    ...hold down the command and R keys whilst booting to try to get to your Recovery partition. If you can, use Disk Utility to try to Verify your boot drive (usually named "Macintosh HD" unless you've renamed it). If the verification fails, try to repair your hard drive. If everything appears to be OK, restart.
    If you can't get into your Recovery partition, your problem is likely hardware related. If so, keep your appointment and see what the Apple techs have to say.
    Clinton

  • My Macbook Pro will not shut down, restart or sleep, with either Apple Logo at the top or the power button.

    Hi, I have a 13" Macbook Pro with Mountain Lion, and I've had it for less than six months.
    It has worked perfectly ever since I got it and I have been completely happy with it, until today. My computer's had a variety of problems; The screen has turned black three times now in the middle of me using it (actively typing or using the touch pad). After clicking some keys or swiping the touchpad, it comes back, but I cannot figure out why this is happening. The big problem, however, is that it won't shutdown.
    I usually shut my computer down at night, and I was trying to today, but it just didn't work. I have tried shutting down by pressing the power button; no dialogue or question box comes up. I have tried shutting down from the Apple Logo at the top left of the screen; nothing happened. My computer won't sleep, restart or shutdown at all. When I close the screen, it goes darkens and lights up as usual, but it won't shut down! What's more, none of the options in the Apple Logo will work; for this post, I tried to see the About This Mac screen, and nothing happens. At best, the Rainbow Disc of Pain will appear and then just go away. The menu does pop up though when I click on it, my Wi-Fi is fine, the apps work, the keyboard's fine, the touchpad is great, everything works but that.
    I have tried Command+Tab to see open applications; I have shut them all down till only Finder is left. I have tried click Force Quit, of course, nothing happened. Nothing at all, not even a dialogue box. I have tried emptying my trash, along with all the 'sketchy' applications. I have plugged my computer in, just in case. Nothing has made any difference and I am very worried!
    I love my macbook pro, and have up to this point, but now I am extremely worried about it; all my important files are on it, and I have nothing to back up with.
    Please, please, please, please help!
    FYI; I have avast! Virus Database. I cannot imagine that that would cause a problem. Please help me!!!

    Yay! Solved my own question; just did a hard shutdown, worked like a charm! Funny, didn't before. But who am I to question salvation?

  • 2007 A1226 Macbook Pro: Fans out of control, will not shut down, and temp sensors have gone offline.

    So my MBP, just an hour or so ago, failed to shut down.  I click Apple->Shut down, but the computer instead restarts and while loading OS X, gives me an error that says "You restarted your computer because of an error."  The fans are maxed out right now, there is -no- process causing thisl  Also, I use iStatMenus to monitor my temperatures, and all of the CPU sensors have gone offline, iStat is only reporting temps for the hard drive and battery.
    iStat also seems to have lost the ability to control my fan speeds.  Uninstalling and reinstalling iStat did nothing.  Resetting PRAM and the SMC have done nothing either.  Any ideas? 

    To start up your computer in Apple Hardware Test:
    Press the power button to turn on your computer.
    Press and hold the D key before the gray startup screen appears. If Apple Hardware Test does not start up, see the Additional Information section at the end of this article.
    s
    p
    o
    i
    l
    e
    r
    a
    l
    e
    r
    t
    Additional Information
    Apple Hardware Test is included on the DVDs that are shipped with some Macintosh computers. If the copy on your hard drive becomes unavailable, use the DVDs to run Apple Hardware Test.
    For Intel-based Apple computers that shipped with Mac OS X v10.5.4 or earlier, Apple Hardware Test is located on the Mac OS X Install Disc 1 and should be included with your computer.
    For Apple computers that shipped with Mac OS X v10.5.5 to 10.6.7, Apple Hardware Test is located on the Applications Install Disc 2 and should be included with your computer.

  • My macbook pro will not shut down

    Hello,
    please help. I have a brand new computer - MacBook pro - 2.2 GHz, Intel Core i7, Mac OS X 10.6.7. When I bought it, I followed the onscreen instructions and "transferred" my old computer, 4 year old MacBook, onto the new one (my accounts, with all the documents, preferences, etc). Now, for some time, before getting my new computer, I had been experiencing problems on my old one: namely, it was not shutting down and I had to "force" it by pressing the switch. I should have known better than transferring the old comp's settings and accounts onto the new one. I didn't and now my new computer is also not shutting down. Does anyone know how to find where the problem is and how to eliminate it? Do I have to backup all, erase, and reinstall everything or is there a less drastic way to cure my afflicted computer?
    Thank you!
    P.

    Choose Force Quit from the Apple menu and close Outlook from there.
    (123063)

  • Macbook will not shut down (bought new in June)

    I saw some other threads on this. Mine will not shut down and I have the latest software updates on Leopard, bought my 13 in. Macbook in June. I have run it a lot, so that it gets warm but seemed to work fine until I try to shut down. I'm really worried about this because I hate to have to force it to shut down by turning it off. I do not have that third party program installed that someone said he'd downloaded and had to remove to get it to work. I hope I don't have to uninstall what little I have installed, such as Intego firewall/antvirus/personal backup, Camino, Sunbird, Flip4Mac, Washing Machine, and Io programs by Time Cycles. I don't run any of those other programs much, mostly just Safari and just now an HP printer driver. I wonder if doing a lot of scanning using the HP printer driver is what caused the problem. I just downloaded the HP printer driver right before this happened, I think. But I really need that to work.
    My computer starts to hang when I shut it down and says it can't log out until I shut down something else, which is generally a program that is not even running. I wish this would stop; I'm not sure what to do about it or whether turning the computer off will hurt it. I don't know if I'm supposed to "zap PRAM" or something but I already did that for a different reason a few days ago and don't want to do that a lot.

    Thanks for your message. I actually just logged in to report that I solved the issue by going to Disk Utility / First Aid / verify permissions/ repair permissions.
    The problem was that the HP Officejet 7300 Series printer driver I had recently installed had all sorts of permissions wrong and they are now repaired. And the Macbook has now shut down properly twice in a row. I wonder if I should report that to HP?
    ** I wonder what damage if any I did by shutting off the computer using the power button two or three times in the past 24 hours when I needed to shut the computer down prior to repairing the permissions problem?*
    And I did see the Activity Monitor in the Utilities section on my own just prior to trying Disk Utility / first aid / repair permissions (the disk it self didn't need repair, supposedly). I don't really think activity monitor was going to help in this instance because I did shut down all the programs, but I'll be testing that utility in the future.
    I bet now would be a good time to hurry up and get Disk Warrior.

  • MacBook Pro EFI Firmware Update 2.0 will not install.

    Hi
    The latest MacBook Pro EFI Firmware Update 2.0 will not install.
    It runs and I restart my Mac but when I search for more updates it appears as a required update again.
    Anyone know why this may be?

    I had the same problem today. I called Apple support who transferred me to second level support and no resolution. I decided to try a combination of the items I have seen below.
    I restarted my computer. I went to apple support download and downloaded the software EFI firmware update 2.0 by typing in search window. I made sure the power cord was pulled into the wall and the laptop had a FULL charge. I installed the update and the computer restarted.
    I went to check the software update window after the update and restart completed and SUCCESSFUL.
    I do not know why the Genius Bar or the second level support could not resolve my issues but, by me reading information here I hope at least this issue is resolved.
    Thanks ALL.......... Happy Mac ing

  • I have pluged a portable battery to the USB and my macbook pro stopped working after that, right before it shut down there was a message on the screen that said something like " USB device is withdrawing so much power, please disconnect and connect again?

    I have plugged a portable battery to the USB and my macbook pro stopped working after that, right before it shut down there was a message on the screen that said something like " USB device is withdrawing so much power, please disconnect and connect again?
    if the device I connected have caused this, shouldn't the macbook itself have some type of protection that should prevent this from happening.
    because when I took it to an apple certified maintenance shop, the guy said that now it could only run while connected to the power. it won't run on batteries. and that I have to change the motherboard.
    can I just replace the damaged part only, would apple consider this as a design issue and they could pay for it, or should I just buy a new motherboard for 800$.
    Help.

    BB1B2,
    The problem is in finding a tech shop that will/can do board level repairs on Macs. They are few. And I certainly wouldn't spend $800 on a new logic board - I would replace the computer if I had to pay that much!
    You could call around to a few repair shops and see if they feel competent to isolate the problem and do a board level repair - but I'm afraid, in the end, that your search will be futile.
    Sorry,
    Clinton

  • New Macbook Pro will not shut down.

    Hi,
    So I just got a new Macbook Pro four days ago from the Apple store and I'm already running into a little bit of trouble, that being my macbook will not shut down. Once I open the shut down window, the normal countdown that comes with it usually will not appear and I am incapable of clicking the shut down button. I have not downloaded anything onto my mac besides Microsoft Silverlight, Adobe Flashplayer, and a pdf document of my receipt from the apple store. I have burned some of my music CDs into itunes and browsed the web (nothing fishy; just some shopping, movie streaming from netflix and youtube, and reading articles online published by universities). Should I take the computer to the Apple store or is this something I can fix on my own?
    Thanks so much

    If I were you I'd take it back to the Apple store and let someone at the Genius Bar take a look at it. The worst case is you made an extra trip, but at least this way you can exchange it immediately if there's a problem. You only have a 14 day window for this, might as well take advantage of it.
    The only other thing I can suggest is to open the Force Quit option from the Apple icon in the upper left corner. See if there are any apps that show Not Responding. If there are any like that, force quit them then try to shut down.

  • MacBook Pro 2013 will not shut down without restarting.

    I got a macbook pro a month ago and it will not shut down without pressing down on the power button. Using the normal Shut down options only restarts the computer. I have done all the disk utility repairs, installed new mountain lion, reset the PRAM several times, and ran software repair from doing the shutdown hold D. I also checked to see if the PRAM is good, and it is Ok in systems utilities. It will also restart when i have not touched the computer for 10 or so minutes and will go to locked user log in.
    I really don't know what else to do. If you need more details let me know. Any advice?
    Thanks

    Thanks!
    I tried this and discovered something new. I noticed that if the computer is charging while shutdown, the computer will still restart. However, if the computer is charging and you shutdown, then unplug the charger, it will remain off. It will also resume normal shut down and sleep if you shut down while unplugged, now. An idea why it will still restard while plugged in though? If not i very much appreciate your help so far!

  • MacBook Pro will not shut down properly

    MacBook Pro will not shut down properly. Gray screen appears with spinning gear but will not shut down completely.

    If you have more than one user account, these instructions must be carried out as an administrator.
    If you have an optical drive, make sure there is no disc in it.
    Launch the Console application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ If you’re running Mac OS X 10.7 or later, open LaunchPad. Click Utilities, then Console in the page that opens.
    Step 1
    Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left.
    Enter "BOOT_TIME" (without the quotes) in the search box. Note the timestamps of those log messages, which refer to the times when the system was booted. Now clear the search box and scroll back in the log to the last boot time when you had the problem. Post the messages logged during the time something abnormal was happening. That time might be before or after the boot.
    For example, if the problem is a slow startup taking three minutes, post the messages timestamped within three minutes after the boot time, not before. If the problem is a system crash or shutdown failure, post the messages from before the boot time, when the system was about to crash or was failing to shut down. In either case, please include the BOOT_TIME message at the beginning or the end of the log extract.
    Post the log text, please, not a screenshot. If there are runs of repeated messages, post only one example of each. Don’t post many repetitions of the same message.
    Important: Some private information, such as your name, may appear in the log. Edit it out by search-and-replace in a text editor before posting.
    Step 2
    Still in Console, look under System Diagnostic Reports for crash or panic logs, and post the most recent one, if any. In the interest of privacy, I suggest you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if present (it may not be.) Please don’t post shutdownStall or hang logs — they're very long and not helpful.

Maybe you are looking for

  • How to remove a device which doesn't exist any longer

    Since Snow Leopard iSync looks for my historic device Siemens S65 when syncing with MobileMe. I then removed the device from the bluetooth-list. But iSync is still searching and giving me an error alert. In the iSynch menue you can add a new device b

  • Why is the music so soft ? I have turn the volume to max

    Why is my earphone so soft although I have turn the music volume to maximum

  • Photo booth - camera used by another application

    Photo Booth suddenly gives the message that it is in use by another application - I have never used it in any other application nor is any other application running - using "user friendly" language, please tell me how to get this running again. The o

  • All of my photos have disappeared from PSE Organizer 13 (after I upgraded it).

    All of my photos have disappeared from PSE Organizer 13 (after I upgraded it).  The files are all on the HD.  When I try and reimport them, Organizer says they are already in there and will not allow me to proceed.  When I highlight a keyword, Get th

  • Premiere Pro CS3 Installation Fails

    I have download the Free Trial version, that fails the installation, shortly after the Setup window progess bar completes. There is a binary log file in Windows\Program Files\Common\Adobe Installers, but does not make any sense when view with a text