While playing songs on my classic, they stop playing intermittently. I have to press "play" again to get them to play. I've restarted the iPod. No help there. Any ideas?
While playing songs on my classic, they stop playing intermittently. I have to press "play" again to get them to play. I've restarted the iPod. No help there. Any ideas?
I, too, am having this problem with my classic today. It's just begun stopping itself once on each song I play today. I press the middle Select button to start it again, but this is getting very annoying! I haven't tried anything on mine today.
EDIT: I just realized that it's now doing this more than once per song. I just had this happen three times in a single 4 and half minute song. Any clues?
Similar Messages
-
I have authorised song to the iPod without success. Any ideas?
I am unable to transfer purchased songs on my new computer to my iPod. I have authorised the new computer and also tried to drag the song over to the iPod without success. A message does appear "The iPod is synced with another i tunes library. Do you want to erase this iPod and sync with this i tunes library". Obviously I don't want to lose everything on the iPod which is what will happen if I say yes. Any ideas?
Your iPod can only be synced with one computer at a time (unless you manually manage your iPod's contents). If you try to sync the iPod with a new/different iTunes library, everything will be erased from the iPod and replaced with the content that is in the new/different iTunes ilbrary.
So what you will want to do is copy everything from your iPod over to your new library first. Then choose the Erase and Sync option or restore your iPod to factory settings and sync everything back over to it. See this older post from another forum member Zevoneer covering the different methods and software available to assist you with the task of copying content from your iPod back to your PC and into iTunes.
https://discussions.apple.com/thread/2452022?start=0&tstart=0
B-rock -
Can someone assist me!
Hello,
now today is the day I've finally received my replacement board. The good news first - it DOES work! Yepeeee!
Now some more information:
The jmicron controller seems to be missing - a screen with something about "Marvel" is shown before the intel raid screen. However, it is only visible for a fraction of second, so I cannot read it. I think it detects my IDE DVD-RW so I'm quite certain it's the replacement for jmicron. I won't miss it - it took me ages to install Linux with the jmicron controller.
The problem where I had to restart the computer sometimes because it didn't even post (RAM error) is gone. It boots just fine now.
I had an extremely long first post - about a minute, but after that it boots very fast now.
anyway, regarding some questions around here - the manual states MSI recommends using an 350W power supply. My 400W is more than enough. Please note - it is an Enermax, not one bundled with a cheap case. My cheap RAM sticks also work very well now. I did try them on different boards before, so now I know I just had a faulty board.
In the end, I can only say this: This is my 3rd board already and it's the first one that works well. As the hardware changed, I presume there were major issues with this board that lead them to make a new revision. What is strange, though, is that the revision is still 1.1, as were my previous two. I pity everybody who had the same problems as I did, but I can now say that I'm very happy about the board now.
Cheers, muro -
Is there any way to get an older version of the app that can be compatible or to "copy" the app from one iPod to the other?
Or maybe to update the opperating system??you can by downloading iTunes to your computer/laptop but before plugging it in to the computer make sure all of your apps are on it then just sync the restored iPod to your computer and all of the apps on the computer will go to your iPod.. Good Luck
-
My iPod does not show artists if they're in a compilation album anymore. How do I get them back?
My iPod does not show artists if they're in a compilation album anymore. How do I get them back?
You can find the Home button at the far right end of the Navigation Toolbar.
Firefox 4 uses a combined Stop/Reload/Go button that is positioned at the right end side of the location bar.<br />
During the page load process it shows as a Stop button and after the loading has finished the button is changed to a Reload button.<br />
If you type in the location bar then that button becomes a Go button.<br />
You can middle-click that Reload button to duplicate the current tab to a new tab.
To move the Stop and Reload buttons to their position to the left of the location bar you can use these steps:
* Open the "View > Toolbars > Customize" window to move the Stop and Reload button out of the location bar.
* Drag the Reload and Stop buttons to their previous position to the left of the location bar.
* Set the order to "Reload - Stop" to get a combined "Reload/Stop" button.
* Set the order to "Stop - Reload" or separate them otherwise to get two distinct buttons.
Open the Customize window via "View > Toolbars > Customize"
* http://kb.mozillazine.org/Toolbar_customization -
My new nano keeps going into sleep mode every copy of minutes while music is playing. I can't figure out how to stop this. The user guide isn't too helpful. Any ideas?
This is usually a sign that your iPod's headphones are not plugged in all the way. Make sure that you cannot see any of the silver still showing from the headphone's plug. You should hear a sort of popping/clicking noise when inserting the headphones letting you know that they have been fully seated.
B-rock -
I updated to the latest iOS and now YouTube and the Ap store are no longer on my phone. Also, not all my music will play and if I play a song it will actually play a different song while displaying the one I chose. Any ideas how to fix this?
You have to download the individual youtube app now. It is no longer a nataive ios app from apple in ios6
-
I have exclamation points next to some of my songs and they won't play...how do I get them to play?
I am not an expert but here's my two cents:
The exclamation point means itunes cannot find the music file in order to play it. There are several possible reasons for this, including but not limited to changing the name or location of your music library/songs, or storing them on an external hard drive or device that is not currently attached. The solutions for these are different so let me know if any of these apply and we can troubleshoot. -
When iTunes was upgraded to the lastest (11.0), many of of songs/music/audiobooks were deleted! I tried syncing my phone to my computer to get them back, but many of those were deleted too! How do I get my purchases back to play them???
It shows on iTunes SOME of my past purchases, but not all (looks like around 30-40% of purchases). It shows on my apple id purchase history everything i have purchased; but in iTunes, some not all of these show up. What does show up is kind of "greyed out", so NOTHING will actually play. I have followed the steps in the iTunes support about how to redownload past purchases, but this dowsn't work, as the download button is also "greyed out".
I am extremly angry and upset about this issue. Could someone please help / advise re how to fix????I'm hoping that this may be just a misunderstanding somewhere.
Could you show an image showing these greyed out items? -
While playing a game my iphone went completely frozen, it does not respond to any input, not even to holding down the on/off hey. Any ideas?
Try a reset. That is holding the sleep/wake and home button together until you see the Apple logo and release. That will reset the iPhone, but will not affect your data.
Thanks! It worked just fine!
MRP66 -
When I watch slide show through my Apple TV version 6..2 the air play instruction box appears always on the screen and hides the photo. Is there any way to stop it.
Hi Sujatha vijay,
It sounds as if your Apple TV is in Conference Room Display mode. You will need to turn this off. See this article -
Apple TV (2nd and 3rd generation): Understanding AirPlay settings
http://support.apple.com/kb/HT5517
Thanks for using Apple Support Communities.
Best,
Brett L -
I am exporting a song to disc. The mix down is playing back in a different key. What am I doing wrong, or how do I get Garage bane to mix down in the key the song in which the song is recorded?
Three basic steps to get you started:
You set the tempo and Rhythm when creating your project:
Launch GarageBand and and select "New Project" from the panel: Pick a suitable template, for example "Song Writing":
Then, in the next panel that opens "New Project from Template" select a folder and a name to store the project and set the basic parameters: Song key, tempo, signature; for example for a song in C-major, 4/4, 100 beats per minute set it like this.
If you later want to speed up the song or slow it down, use the LED display at the bottom of the window. Click on the leftmost icon to change it to show the metronom for "Project View" like this. Then you can change the basic settings:
Regards
Léonie
P.S. The GarageBand Help - accessible from the main menu bar "Help > GarageBand Help" or ⌘? is quite good and should get you started easily. -
My songs that I purchased on my itunes account from my dad's computer will not play on my new computer, I have access to my entire account but can only play songs purchased using my new computer. Does anyone have any ideas?
Hi Kevin,
Have you authorized the Computer to your Apple ID?
If not, sign on to iTunes.
Then got to the Store menu option at the top of the screen (CTL+B if it is not showing), and click on it to display the dropdown, and select Authorize this computer.
If that doesn't work, then sign on your Dad's iTunes ID and repeat the Authorization process.
Cheers,
GB -
Hi, I'm pretty new to itunes. I bought a song and it downloaded, but will only play the first 3 seconds? Any idea how I get it to play the rest of the tune?
I'd report the problem to the iTunes Store.
Log in to the Store. Click on "Account" in your Quick Links. When you're in your Account information screen, go down to Purchase History and click "See all".
Find the item that is not playing properly. If you can't see "Report a Problem" next to the entry, click the "Report a problem" button. Now click the "Report a Problem" link next to the item.
(Not entirely sure what happens after you click that link, but fingers crossed it should be relatively straightforward.) -
I recently purchased QuickTime 7 Pro to convert avi files to mov files for editing on Imovie. However, QuickTime won't play the files. How can I get them to play and how can I convert them to mov files?
I recently purchased QuickTime 7 Pro to convert avi files to mov files for editing on Imovie. However, QuickTime won't play the files. How can I get them to play and how can I convert them to mov files?
Both the AVI and the MOV file extensions refer to the file container and not the compressed data the file contains. Both are generic file containers in that each may contain any valid combination of audio and/or video data that is compatible with the codec component configuration of the system on which the file was created. On the other hand, whether a file is playback compatible, conversion compatible, and/or edit compatible depends on the data actually contained in the file container. So, you are basically dealing with two separate issues here—the container and what is inside it.
Basically, if you want to make your files ediit compatible with iMovie, you must change your file container to one that is acceptable to iMovie and convert the data to edit compatible audio and/or video compression formats as may be necessary. The best approach is to determine what codecs were actually used to create the original AVI files and add them to your system if possible. In most cases a codec package like Perian can be added to your system's codec component configuration to may the AVI file playable. Once they are playable, in the QT 7 app then they can be chnged or converted to file types and compression formats that can be edited in iMovie. (While Perian handles most codecs commonly used to create AVI files, it does not handle all possibilities and, while the Perian codec package still works under cureent Mac OS versions, its development group has decided to drop further development/support of the package.)
Background: AVI is a file container originally developed by Microsoft back in 1992 but for which official support was discontinued about 11 years. Despite its limitations, Windows users still tend to use this file based on its open source ease of use and generic nature, thus, making its use so popular that most users are unwilling to switch to more modern but less generic file types. Since some AVI legacy compression formats have never been transcoded for the Mac or use beyond OS 9 or OS X PPC platforms, it is often important to know what specific compression formats are contained in the AVI file to know which codecs to add to your system and which not to add in order to avoid possible codec conflicts.
You can use many different converters to convert AVI files to iMovie edit compatible files. Most third-party apps contain their own buit-in codecs which do not relay on the Mac codec component configuration. Free ones, like HandBrake, usually have limited conversion capabilities while those that have more varied outputs are usually commercial in nature and will cost you additional cash. QT 7 Pro or the free MPEG Streamclip app allow you to access you own system's component configuration and use any available codec component like DV, AIC, MPEG-4, H.264, Photo JPEG, etc.—all of which are iMovie compatible for editing purposes—but only after making the AVI file QT 7 player compatible.
In order to determine what compression formats wewre used in your AVI files you can
1) Try checking the Finder "Info" window,
2) Use the "Inspector", "Media Info", or "Properties" window of any player app that will open the file, or
3) Use a general media utility app like "MediaInfo" to read the file characteristics.
Maybe you are looking for
-
Hi, I am going crazy with frustration. THis is the first time I have tried to download podcasts to my (partner's) iphone. I have downloaded the latest itunes software. Having gone round and round in circles I'm fairly confused over what happened wh
-
I'm trying to use the VPP to buy apps for iPads but it says I need to use a different apple id?
We are a small, private school that recently purchased 40 iPad minis to use in the classroom. We have been using Apple Configurator and iTunes to manage the free apps on the iPads. Now we would like to purchase some apps and I went through the step
-
I have 10.9.1 OS and a HP deskjet 5440 scanner. I can scan anything to the computer, but cannot save it or send it anywhere. I tried to save to my desktop as PDF and wouldn't and I also tried to send as attachment to email and it wouldn't. Any sugges
-
Hi, I have just started experiencing a strange problem. When I right click on a single file (document, movie, pic, etc.) to change the color, the finder quits. This does not happen when right clicking a folder. I wonder if someone has experienced the
-
I upgraded from 4 to 5s and now I cannot retrieve my photos or contacts?