While preparing lsmw to upload g/l masters i am getting error
in lsmw in fourth step one error is coming plz solve, the error is
No target structures could be found
Message no. /SAPDMC/LSMW_OBJ_030001
plz give replay urgent
Hello,
I have encountered this same issue and working with the Security team this is a security authorization issue. Please check that the appropriate authorizations are assigned to your user account.
http://help.sap.com/saphelp_nw70/helpdata/en/dc/1a6a2e337e11d3bc3c00105a6588b2/frameset.htm
To perform activities in the LSM Workbench, you require the appropriate authorizations. The LSM Workbench has the following four authorization levels:
Authorization Level
Profile
Function
Display
B_LSMW_SHOW
The user can display all the projects and their associated steps. The user is not allowed to switch to the change mode.
Execute
B_LSMW_EXEC
The user can display as well as read, convert, and import data.
Change
B_LSMW_CHG
The user has Execute authorization and, in addition, can change and copy objects.
Administration
B_LSMW_ALL
The user can use all the functions provided by the tool.
Similar Messages
-
While updating iphone software to 5.0.1, I am getting error that Iphone could not be updated because the firmware file not compatible.
Can anyone help me to resolve this issue.Using iTunes 10.5.2.11 on a PC running 64 bit Windows 7
First did a full back up of iphone using iTunes
Put iphone into Recovery Mode ( http://support.apple.com/kb/ht1808 ). Erases all user data and settings!
Disconnected USB cable from iphone
Powered off iphone by holding down Sleep/Off button until slider appeared, slid to off, waited until screen dark
Pressed and kept holding Home button while plugging cable back into phone
I still saw the graphic on the iphone that said to plug into iTunes, so I unplugged and re-plugged cable. (I may have released the Home button too soon)
Recovery Mode alert came up in iTunes.
Followed all iTunes prompts to restore phone - it downloaded and sucessfully installed iOS 5.0.1
iphone did not appear in iTunes due to missing pairing file (that made me nervous)
iphone was now at factory settings. I followed prompts on iphone screen to start reactivation process
Eventually the iphone asked if I wanted to restore from a back-up (whew!)
A window opened in iTunes and I was able to select my previous back-up file for the restore
A full restore from back-up then occured
I also allowed a carrier settings update to occur when prompted (not sure that happens in all cases)
When the restore was done I had to re-enter some passwords, but everything was there
iOS is now 5.0.1 (9A406). The whole process took about an hour. -
While user is posting the goods delivery. He was getting error "Field selec
Hello
SAP Experts
i am getting an error
While user is posting the goods delivery. He was getting error "Field selection for movement type 981/account 1830200817(stock transfer account) differs for customer goods movement(015)" - Message no M7093.
Thanks & Regards
Narendra GHi Narendra,
Go to SE38 and run report RM07CUFA .This report gives you details as it compares FI and MM customizing ( mvmt type / acct G/L accnt no)
Either you have to change the setting of the GL or the movement type..as per business requirement.
This report will exactly give you which field has the conflict.
Probable some field is required in FI and suppressed in MM or vice versa.. check it out.
Regards,
SAPFICO -
My Adobe Premiere Elements was working a little while ago -- nothing has changed on my PC -- now I get error 150:30
seadrift
What version of Premiere Elements are you using and on what Windows computer are you running it?
The 150:30 error is probably indicative of a licensing problem.
How long has the problem existed?
If it persists, please check out the following Adobe document related to troubleshooting this type of matter...perhaps starting with
solution 2.
Error "Licensing has stopped working" | Windows
Please let us know if any of that worked for you.
Thanks.
ATR -
While uploading a CSV file i am getting error
Hi All,
I am trying to upload a huge CSV file and now it is giving below error:
ORA-01653: unable to extend table ADT.SCG_RECIEVABLES2 by 128 in tablespace APEX_1711125608495793205.
Any expert,please guide what type of error is it?and what i need to do to solve it.
workspace name: ADT
target table is SCG_RECIEVABLES2.
ShyamHi,
Table space is full. Contact your DBA or extend tablespace.
First hit from Googling by that ORA error
http://www.dbmotive.com/oracle_error_codes.php?errcode=01653
BR,
Jari -
How can I get rid of this?
With that particular variety of 1606 (it's a 1606 error message even though the 1606 error message number isn't returned by the iTunes installer), the following Microsoft document is worth a try:
You receive an "Error 1606" error message when you try to install or remove a Microsoft program -
While preparing an AUDIT - (Data changes report) faces an 'Server error' message
Hi BPC Experts,
While preparing an AUDIT report- (Data changes report) faces an 'Server error' message.
But regular users are able to input their data in EPM.
What could be the reason for this message?
Regards,
Rajesh.Hi Chuan,
Attached the Error message here. We use BPC NW10
Rajesh. -
In bdc while transfer data from itab to db .we get error how to handle ?
hi guys,
1.while uploading a data from flat file to internal table .
We get
Lifnr name1 ort01
123 # Eswar# in ##
But while transfer data from <b>itab to db</b> .we get error how to handle that?
pls coud u give the logic
i'm waiting for u r reply.
Ishwar.well without telling us WHAT error message you get noone will be able to help yah.
please help us to help you. thx -
while opening most of the website on Safari i am getting error: Apache Tomcat/5.5.25-Error report. I have upgraded OS of MacBook Air from Maverick 10.9 to Yosemite 10.10 two days before.
HTTP Status 404 - /ssssportal.war/fup_gpon_1m_6g_512k.jspp
type Status report
message /ssssportal.war/fup_gpon_1m_6g_512k.jspp
description The requested resource (/ssssportal.war/fup_gpon_1m_6g_512k.jspp) is not available.
Kindly help. Also I am getting spinning ball most of the time. This was not with OS X Maverick 10.9.while opening most of the website on Safari i am getting error: Apache Tomcat/5.5.25-Error report. I have upgraded OS of MacBook Air from Maverick 10.9 to Yosemite 10.10 two days before.
HTTP Status 404 - /ssssportal.war/fup_gpon_1m_6g_512k.jspp
type Status report
message /ssssportal.war/fup_gpon_1m_6g_512k.jspp
description The requested resource (/ssssportal.war/fup_gpon_1m_6g_512k.jspp) is not available.
Kindly help. Also I am getting spinning ball most of the time. This was not with OS X Maverick 10.9. -
Getting error msg while posting entry in GL using F-02
Hi gurus,
While i am posting entry in GL using F-02 getting error message as "no controlling area has been assigned to company code"
can any help me out at the stage i dint want to configure co settings is there any way to pass the entries
Thanks & regards
NandiniHi Nandini,
Have you defined a GL account as a cost element? I think you have multiple company codes which are using same chart of accounts and this company code is also using the same chart of accounts. And also you have configured single controlling area for all company codes. Even though you have not assigned this company code to controlling area. The cost elements will create at controlling area level.
Due to this system is throwing error message.
Please check and let us know if you have other issue.
Regards,
Mukthar -
Getting error while connect to Site Studio
Hi All,
While i am connecting UCM from Site Studio, I'm getting error like *"the Site Studio component is from an older version of the product"*.
Please give me advise to solve this problem.The Site Studio designer that you are using to connect to content sever is not compatible with the SiteStudio component that you have installed.
Install the designer that is inside the site studio component zip and try.
regards,
deepak -
Getting Error 0xC8000227 while updating pathces in winodws 2003 r2 enter prise editiion
While updating Windows Patches in windows 2003 r2 Enterprise Edition Getting Error 0xC8000227
Hi,
Based on my research, most of the error is caused by date time
inconsistence.
So please confirm you have correct date time settings.
Hope this helps. -
Getting error while uploading gl master data using LSMW batch input data
Hi Experts,
I am getting error while uploading the GL master data through lsmw using batch input recording.
After completion of all steps at the time of running batch input session error i am getting is "maintain EN language discription"
and Pls tell me is it possible to upload transactional data using lsmw? if yes pls explaing briefly.Hello,
Kindly post in the FI forum to get a better response.
Regarding the issue you might check whether the correct column is being picked up where you have maintained the description.
Kind Regards // Shaubhik -
Determining Source Structure u0096 for LSMW to upload Purchasing Info records?
I am trying to use program RM06IBI0 through LSMW to upload Purchasing Info records. While configuring LSMW, how do I determine the source structure? Can anybody please help me with an example?
Thanks,
Ketanhi dear
first of all record all the fields which you require through shdb including your vendor code and esokz.
now
generate a structure for mapping the fields through table maintainence generator option.you can add any number of fields there.
actully this must include all the fields which are being fetched from the your flat file.
please revert back if u find problem.
reward points if it find useful
regards
amit singla -
Error in doing LSMW for uploading in Sale order
Dear Sir,
While doing test run for LSMW for uploading 15 Sale order , first order saved with no error and from second order the following error is displayed.
Exchange rate of 1 in INR 2 for date 25.05.2009 3 could not be determined.
Kindly do the needfull.Sir,
If we manually enter, order getting saved for all the sale order.
Why it is not possible while doing LSMW.
Please clarify.
Regards
Sethuraman
Maybe you are looking for
-
Oracle 8.1.6 Installation on RedHat 6.2
I was sitting here now for 1 day and now got Oracle 8.1.6 installed on RedHat 6.2. First I downloaded it from the Oracle-Ftp-Server and wanted to run the "runInstaller". That didn't work because of bin/jre not found. In the version 8.1.5 I had an ext
-
IDOC - XI - post HTTP on .ASP?& DATA_CONTENT
HI ALL ! I have this scenario : 1) R3 send IDOC ORDERS01 to XI (3.0) 2) XI elabs IDOC fields (in mapping step) 3) XI with HTTP Adapter post data to a "page".asp on webserver using querystring (like page.asp?&ID_CUSTOMER=123&ORD_DOC=WE ...etc..) My A
-
how to reset my ipad to start all over
-
Where to place ORDER BY clause when a query includes UNION
I have a query that has UNION in it. could you please tell me where to place the ORDER BY clause. Because it's throwing an error if i place the ORDER BY clause at the end
-
Default paragraph format in SMART FORMS
Hi all! Can we mention default paragraph format for SMART FORMS? How can we do that? Please suggest.