While processing ALEAUD - "Error when locking the audit statistics"

Hello,
I am sending out IDOC for HR data and then prcessing ALEAUD inbound idoc immediatley (setting is done in WE21 partner profiles).
While processing these incomming idocs, I am getting this error "Error when locking the audit statistics for P01LOGSYS1 IMTIMEDEP HRMD_A" for few idocs. e.g. out of 1000 for 100 idocs this error will happen and IDOC goes to status 51.
If I try to process thes idocs ALEAUD using background processing and if I schedule 2 jobs at a time then I will get same error and IDOC goes to status 51.
Can someone help me out?

Hi
I tried processing the idocs in background processing as you have suggested using program RBDAPP01 (inbound).
There are 2 options in this program serial processing and parallel processing. When I select serial processing everyhting goes smooth but it takes long time. But when I select parallel processing I get same locking error mentioned above and only few idocs will get processed successfully with status 53 and all other will error out with status 51.
If I schedule 2  different jobs in background program RBDAPP01 (inbound) using serial processing then same thing will happen.  only few idocs will get processed successfully with status 53 and all other will error out with status 51.
And I will get locking error ....
Note 1333417 says, " these IDocs will be processed via background runs of report RBDAPP01 \ RSEOUT00 (using background work processes) in batch mode leaving dialog work processes free for users and mission-critical processes. Hence you will not encounter the resources problems you are currently experiencing. The only other option would be to try increasing the number of available dialog work processes. The number of dialog processes must be greater than or equal to the total of the number of update and background processes per application server and must be configured across all operation mode
switches (see SAP note 74141). *However when there are a large number of IDocs being processed this is not a practical solution."*
Does that mean there is no possoble solution for this issue. If I increase dialog work processes will it be helpfull ?

Similar Messages

  • KP06 Cost Center Budget Planning System error when locking the data records

    Hi,
    While updating Cost Center Planning system(KP06) its giving the below error:
    System error when locking the data records.
    Message no. KI502
    Diagnosis
    The lock to protect the data records being processed could not be set. The
    probable reason for this is that the SAP locking table is full and no more
    entries can be added.
    Procedure
    Inform your system administrator immediately
    No planning data has been changed
    Message no. K8038
    Diagnosis
    You used Post. While preparing the data for posting, the SAP System
    determined that no changes were made in the available databank values.
    System Response
    A posting activity price is not necessary
    Please help me how can we rectify the above error..
    Thanks
    VS Rao

    Hi,
    check the locking entries (t-code SM12).
    http://help.sap.com/saphelp_erp2004/helpdata/en/37/a2e3ae344411d3acb00000e83539c3/frameset.htm
    Best regards, Christian

  • What is meant by locking the audit statistics?

    Hi all,
    I am getting this error in the inbound IDoc ALEAUD "The Audit statistics for sending system E1Q100, receiver system QS1310 and message type ORDERS could not be locked." Status 51, What is meant by locking the Audit statistics?
    Thanks,
    Charles.

    It is basically trying to get a get a database lock on the table BDAUDSTATE to make your status updates but it was not able to.
    See if a lock exists on this table and remove it, or it may also be a case of stepping on the toes that two simultaneous updates are going for the same IDoc.
    It is basically a database lock error.

  • "Exception Processing Message" error when clicking the Accessing Server Data link on the start page

    When I first started the application, I click the Accessing Server Data link on the start page.  I immediately got the error "Exception Processing Message c0000013 Parameters 75b6bf7c 4 75b6bf7c 75b6bf7c in a dialog box titled "Windows - No Disk".  I had to used Task Manager to remove the box after closing Flash Builder 4.  I then tried the video tutorial on "PHP Services in Flash Builder 4".  I keep receiving an error during service introspection trying to connect to the PHP class.  It was the same error as the other individual "Cannot Connect to PHP Service".  So I tried another tutorial and generated a sample PHP class.  I moved a datagrid on to the stage, droped in the getAllItems function, and configured the return type.  However, when I ran the app, I received the same error "Exception Processing Message" again.  I have attached the screenshot of the error in addition to my phpinfo and log files.

    "The exception process message" is definitely a issue. Is it happening consistently, if so can you file a bug at bugs.adobe.com/flex and give out your machine config details, and the error log.
    With regards to generating a new php file and the introspection error that you are getting, looking at the logs it probably is two fold.
    First off the name of the file and the class name should be the same, are you having employeeServices as the name of the class in employeeServices.php file.
    Second, It seems prior to generating this new file, you had a syntax error at line 5.
    It would be easier to figure out what the error is, if you can also attach the php file, by removing any sensitive information in that.
    Hope this helps.
    Thanks
    -Sunil

  • Bootcamp - I'm trying to install windows 8 on my MBPr but getting an error when partitioning the disk. 'An error occurred while partitioning the disk'

    I'm trying to install windows 8 on my MBPr but getting an error when partitioning the disk. 'An error occurred while partitioning the disk'

    You posted your Bootcamp question in the Macbook Pro forum. Your question has been asked and answered many times in the Bootcamp forum. https://discussions.apple.com/community/windows_software/boot_camp
    When you post in the Bootcamp forum include the complete and exact error message.

  • Error in consuming webservice in SE80 - SOAP:1.023 SRT: Processing error in Internet Communication Framework: ("ICF Error when receiving the response: ICM_HTTP_CONNECTION)

    Dear Gurus,
    Hope you all are fine. I am consuming 2 external WSDL's in ABAP (SE80 - Service Consumer). These are working fine in SAP DEV server. But when i execute tham in SAP QAS server, i am getting this error.
    (SOAP:1.023 SRT: Processing error in Internet Communication Framework: ("ICF Error when receiving the response: ICM_HTTP_CONNECTION))
    can anybody tell whet could be the problem?
    Thanks

    Dear Inaki,
    These proxies are working fine in DEV server. I transported them in QAS and tried to execute but getting that error. Networking team say that SAP and other servers can free communicate to each other.
    Regards

  • SOAP:1.023 SRT: Processing error in Internet Communication Framework: ("ICF Error when receiving the response: ICM_HTTP_SSL_ERROR")

    Hello all,
    can you pls suggest me smth for this:
    I am running solman_setup and at phase 5.1 (Configure Web dispatcher) and I have errors:
    SOAP:1.023 SRT: Processing error in Internet Communication Framework: ("ICF Error when receiving the response: ICM_HTTP_SSL_ERROR")
    L3 - Failed to reach test WS through System Settings (ICM/HTTPURLLOC)
    L2 - Failed to reach test WS through ICM
    I choosed: No SAP Web Dispatcher used
    What I did:
    1. re-created users SM_EXTERN_WS and SM_INTERN_WS
    2. added table HTTPURLLOC with the full hostname and the port
    3. created SSL server standard certificate in STRUST and its green
    4. instance profile>>add login/accept_sso2_ticket=1 and login/create_sso2_ticket=2
    Thx for any suggestion
    Chris

    Hello,
    I read note 1094342 - ICM trace contains verification of the server's certificate
    and I installed in the IE browser the PSE saved from /strust
    Thx for any idea
    [Thr 140736729089792] *** ERROR during SecudeSSL_SessionStart() from SSL_connect()==SSL_ERROR_SSL[Thr 140736729089792]    session uses PSE file "/usr/sap/SID/DVEBMGS00/sec/SAPSSLA.pse"[Thr 140736729089792] SecudeSSL_SessionStart: SSL_connect() failed[Thr 140736729089792]   secude_error 536872221 (0x2000051d) = "SSLAPI error"[Thr 140736731203328] NiIBlockMode: set blockmode for hdl 92 FALSE[Thr 140736729089792] >> Begin of Secude-SSL Errorstack >>[Thr 140736729089792] 0x2000051dSAPCRYPTOLIB SSL_connect[Thr 140736729089792] SSL API error[Thr 140736729089792] Failed to verify peer certificate. Peer not trusted.
    ][Thr 140736729089792] << End of Secude-SSL Errorstack[Thr 140736731203328] NiIBlockMode: set blockmode for hdl 92 TRUE[Thr 140736729089792]   SSL_get_state() returned 0x00002131 "SSLv3 read server certificate B"[Thr 140736731203328]   SSL_get_state() returned 0x00001180 "SSLv3 read client certificate A"[Thr 140736731203328] *** ERROR during SecudeSSL_SessionStart() from SSL_accept()==SSL_ERROR_SSL[Thr 140736731203328]    session uses PSE file "/usr/sap/SID/DVEBMGS00/sec/SAPSSLS.pse"[Thr 140736731203328] SecudeSSL_SessionStart: SSL_accept() failed[Thr 140736731203328]   secude_error 536875078 (0x20001046) = "SSL API error"[Thr 140736729089792] No certificate request received from Server[Thr 140736731203328] >> Begin of Secude-SSL Errorstack >>[Thr 140736731203328] 0x20001046SAPCRYPTOLIB SSL_accept[Thr 140736731203328] SSL API error[Thr 140736731203328] received a fatal SSLv3 certificate unknown alert message from the peer[Thr 140736731203328] 0xa0600263 SSL ssl23_accept[Thr 140736731203328] received a fatal SSLv3 certificate unknown alert message from the peer[Thr 140736731203328] 0xa0600263 SSL ssl3_read_bytes[Thr 140736731203328] received a fatal SSLv3 certificate unknown alert message from the peer[Thr 140736731203328] << End of Secude-SSL Errorstack[Thr 140736731203328] <<- ERROR: SapSSLSessionStart(sssl_hdl=1315bf0)==SSSLERR_SSL_ACCEPT[Thr 140736731203328] <<- SapSSLErrorName()==SSSLERR_SSL_ACCEPT[Thr 140736729089792] <<- ERROR: SapSSLSessionStart(sssl_hdl=7fffcc023860)==SSSLERR_PEER_CERT_UNTRUSTED[Thr 140736729089792] <<- SapSSLErrorName()==SSSLERR_PEER_CERT_UNTRUSTED[Thr 140736731203328] *** ERROR => IcmConnInitServerSSL: SapSSLSessionStart returned (-56): SSSLERR_SSL_ACCEPT [icxxconn_mt. 1713][Thr 140736729089792] *** ERROR => IcmConnInitClientSSL: SapSSLSessionStart failed (-102): SSSLERR_PEER_CERT_UNTRUSTED {000f3a6b} [icxxconn_mt.c 1989][Thr 140736731203328] <<- SapSSLSessionDone()==SAP_O_K[Thr 140736731203328]      in: sssl_hdl   = 1315bf0[Thr 140736731203328]          ... ni_hdl = 92[Thr 140736731203328] NiICloseHandle: shutdown and close hdl 92/sock 41[Thr 140736729089792] <<- SapSSLSessionDone()==SAP_O_K[Thr 140736729089792]      in: sssl_hdl   = 7fffcc023860[Thr 140736729089792]          ... ni_hdl = 223[Thr 140736729089792] IcmConnConnect(id=15/14955): free MPI request blocks[Thr 140736729089792] MPI<5909c>85#7 GetInbuf -1 21d220 1757 (1) -> MPI_EOS: End Of Stream

  • An Error Occurred While Processing This Page. Check The Log For Details. Pl

    Hi,
    I started getting this error while opening the app
    Application was working fine. All of a sudden this error came while opening the application.
    " An Error Occurred While Processing This Page. Check The Log For Details. Please Close The Current Tab and Open Application Again."
    I cannot see calc manger rules for this means in calc manager I am not able to see this app.
    Also, in logs I see
    java.lang.RuntimeException: Error loading objects from data source: java.sql.SQLSyntaxErrorException: ORA-00942: table or view does not exist
    I am not able to get why this is occurring.
    Any help?

    If it is not important then you can try deleting and recreating the application, if you want to be sure after you delete the application then drop/recreate the Oracle schema.
    If you have problems deleting the application and have to remove it manually the following post might be helpful Planning 11.1.1.3 - Manually Delete a Classic Application
    Cheers
    John
    http://john-goodwin.blogspot.com/

  • Error when deploy the Planning SampAp application view

    When deploying, the job console shows:
    Started Time : 2008年3月4日 13:23:49
    Submitted Time : 2008年3月4日 13:23:49
    Last Updated Time : 2008年3月4日 13:23:52
    User Name : admin
    Process Name :
    Thread : 0
    Server : DimServer
    Detail : Initiating Product Action...
    Inspecting Deployment History...
    Generating Headers and Callback Information...
    Generating Application Data...
    Preparing Product Request...
    Posting Product Request...
    Product Response:200...
    Waiting For Status Updates...
    and it was stocked at 9%. After a while, the job console showed:
    Started Time : 2008年3月4日 11:41:34
    Submitted Time : 2008年3月4日 11:41:34
    Last Updated Time : 2008年3月4日 11:46:45
    User Name : admin
    Process Name :
    Thread : 0
    Server : DimServer
    Detail : App Creation failed with Exceptioncom.hyperion.planning.HspRuntimeException: Unable to locate dimension information to load. Dimension: Currency     at com.hyperion.planning.HspDimensionLoader.parseModelForPlanningDimen(Unknown Source)     at com.hyperion.planning.HspDimensionLoader.parseModelForPlanningDimen(Unknown Source)     at com.hyperion.planning.HspDimensionLoader.parse(Unknown Source)     at com.hyperion.planning.HspDimensionLoader.load(Unknown Source)     at com.hyperion.planning.HspDimensionLoader.load(Unknown Source)     at com.hyperion.planning.utils.HspApplicationCreator.loadOutline(Unknown Source)     at com.hyperion.planning.utils.HspApplicationCreator.load(Unknown Source)     at com.hyperion.planning.utils.HspApplicationCreator.createApplication(Unknown Source)     at com.hyperion.planning.appdeploy.HspAppDefinition.deployAppFromXML(Unknown Source)     at com.hyperion.planning.appdeploy.HspAppDefinition.access$000(Unknown Source)     at com.hyperion.planning.appdeploy.HspAppDefinition$1.run(Unknown Source)
    I've created a new datasource for this app, but still faced the same problem.
    PS: I also found some error when validate the SampAp application view, so I've changed it a little. I don't know if the application view design may cause this problem. Thanks for your reply.

    Hi,
    From another post which I think relates to same sort of issue the solution was :-
    On your server > Change your "Standards and formats" into English(United States) in "Regional and Language Options".
    This was due to the currency format being in chinese.
    Cheers
    John

  • Distribution Cycle KSV5 Resulting in error when deselected the test run chk

    Hi Experts,
    Please help me out
    iam getting an error while running a Distribution Cycle KSV5 Resulting in error when deselected the test run chk box.
    When run the same in the test run, there isn't any error log. but when i deselect the same & run iam getting an error like
    First Message:
    Balance per segment 9999 is not zero
    Message no. FAGL_COFI025
    Diagnosis
    Balance per segment 9999 is not zero.
    The balance on segment 9999 is 50.00 (transaction currency), 0.00 (object currency), and 50.00 (controlling area currency).
    System Response
    With the standard settings, postings cannot be made to the document because the balance for segment and partner segment does not amount to zero. This may be due to a programming error, or this setting may have been made (perhaps unintentionally) in the BAdIs for determining the segment or partner segment.
    Procedure
    If there is a programming error, please inform your system administrator.
    If this behavior is intentional, you can deactivate error message FAGL_COFI 025 in Customizing or change the error message into a warning message or an information message.
    2nd Message
    Balance per segment 1000 is not zero
    Message no. FAGL_COFI025
    Diagnosis
    Balance per segment 1000 is not zero.
    The balance on segment 1000 is 50.00- (transaction currency), 0.00 (object currency), and 50.00- (controlling area currency).
    System Response
    With the standard settings, postings cannot be made to the document because the balance for segment and partner segment does not amount to zero. This may be due to a programming error, or this setting may have been made (perhaps unintentionally) in the BAdIs for determining the segment or partner segment.
    Procedure
    If there is a programming error, please inform your system administrator.
    If this behavior is intentional, you can deactivate error message FAGL_COFI 025 in Customizing or change the error message into a warning message or an information message.
    3rd Message
    No update performed due to an error
    Message no. GA719
    Diagnosis
    A serious error occurred during processing.
    System Response
    Processing is continued as far as possible, but results are not posted.
    Procedure
    This error is shown in the error list before this error message. Here you can find more information about this particular error.
    I would appreciate an early reply........!!!
    Thanks & Regards,
    Neela

    Hi,
    Check notes 764652 and 897086; it might be helpful.
    Regards,
    Eli

  • ABAP Run time error when display the Customs Export declarations

    Hi,
    I'm receiving ABAP Run time error when display the Customs Exp. Declarations Under SAP Customs Processing -> Customs Processing - Import / Export -> Monitoring.
    Error messaging point to Function Module - /SAPSLL/CUHD_LOAD_SELECTION.
    While debugging we found that Primary Key of the below structures are not the same
    lt_corpar                              type      /sapsll/corpar_t
    lt_corpar_ht       type      /sapsll/corpar_k02_ht
    Does anyone has the SAP Notes or solution to this issue other than changing the structures manually. I'm not sure about the impact if i change manually
    Error message short details
    Termination occurred in the ABAP program "/SAPSLL/SAPLCUHD_SELECTION" - in
         "/SAPSLL/CUHD_LOAD_SELECTION".
        The main program was "/SAPSLL/CULO_DISPLAY_CUS_EXP ".
        In the source code you have the termination point in line 144
        of the (Include) program "/SAPSLL/LCUHD_SELECTIONU01".
    We are on GTS Release 8.0 and Support Package SAPK-80014INSAPSLL (Support pack level 14).
    Regards,
    Pradeep Maddi

    Hi,
    I have implemented SAP Note 1531799, but it hasn't resolved the current issue.
    For Our GTS instance, there are 2 Feeder Systems (ECC) attached, but document transfer in one of the system has not been activated. Both having the same partner functions ( We copied the sandbox into 2 different instances for different business Testings and now these 2 instances attached to GTS for testing). These feeder systems have different Logical system names and Logical system groups.
    Recently i have implemented SAP Corrections manually for one the issue, Please see below thread for the detail information
    Proforma Invoice not transferred to GTS
    After implementing the corrections, i have created Pro-forma invoice in ECC system. When i tried to display, i'm facing the ABAP Dump issues.
    Error details
    Runtime Errors         ITAB_DUPLICATE_KEY
    ABAP Program           /SAPSLL/SAPLCUHD_SELECTION
    Application Component  SLL-LEG
    You tried to insert an entry into table  "\FUNCTION=/SAPSLL/CUHD_LOAD_SELECTION\DATA=LT_CORPAR_HT". However, updating the unique table key "PRIMARY_KEY" resulted in a duplicate entry. The key concerned may be either the primary key or a secondary key.
    Regards,
    Pradeep

  • BW Statistics-BI7-Error when generating the update program

    Dear All,
    We faced the below problem in while executing the infopackages for BW statistics in BI7.0
    7099 records from 7099 records..but shows request is red.
    Error message during processing in BI
    Diagnosis
    An error occurred in BI while processing the data. The error is documented in an error message.
    System Response
    A caller 01, 02 or equal to or greater than 20 contains an error meesage.
    Further analysis:
    The error message(s) was (were) sent by:
    Update rules
    Procedure
    Check the error message (pushbutton below the text).
    Select the message in the message dialog box, and look at the long text for further information.
    Follow the instructions in the message.
    Update rules ( 7089  -> 0 Records ) : Errors occurred (RED)
    Update rules ( 7089  -> 0 Records ) : Errors occurred
    InfoCube 0TCT_C23 will be updated
    Error when generating the update program (RED)
    Is there any notes to apply for this?
    Initilaztion is executed with out any errors!!
    Regards

    Hi
    Caller 01 : If there is any inconsistecy while loading the data or if the program cannot able to execute a specific task it will give the caller errors.
    check in the transaction ST22
    check for the OSS notes 631668, 860475
    Check the below links which have a discussion on the same problem.
    A caller 01, 02 or equal to or greater than 20 contains an error meesage
    A caller 01, 02 or equal to or greater than 20 contains an error meesage.
    ERROR?
    Data load System error
    Hope this will help
    Regards
    Shilpa

  • Getting error when creating the new application

    Hi Sandeep,,
    wen iam creating the new application iam getting
    An error occurred while processing this page. Check the log for details.
    where shud i have check log details..
    i have given the following iputs
    in select tab:
    datasource name :oradsn
    calender:
    custom:
    prefix tp
    perids per year 13
    application;
    test
    description:
    example
    shared service project
    unassinged
    instance :newinstance
    calender
    Select the default currency for viewing data in the application.
    Default Application Currency
    USD $ United States of America dollar
    Will your application support multiple currencies?
    no
    Standard Plan Types Name
    Plan Type 1
    could you please let me know the solutions for this
    thanks and best regards,
    Kishore

    1. As you are taking service, your database is oracle database, you might have created a user/schema .
    2. When you are creating FDM application and that too providing details of database , there is a button 'options',which has more options like tablespace..etc.
    3. If you have created a schema and it has a specific table space ,then you need to provide these details also.else, while creating a user, if you have selected everything as default, then no need to go to 'options'.
    Thankx
    Nick

  • Getting Error when deploying the WD application

    hi all,
    Anybody have idea about , what is the reason for the following error. Till now it is working properly. suddenly it is giving the following error when deploying the application.
    2.4.2007 13:17:36 /userOut/deploy (com.sap.ide.eclipse.sdm.threading.DeployThreadManager) [Thread[Deploy Thread,5,main]] ERROR:
    [004]Deployment aborted
    Settings
    SDM host : eimkopdvs4
    SDM port : 50118
    URL to deploy : file:/C:/WINDOWS/TEMP/temp2898TestWebDynproProj.ear
    Result
    => deployment aborted : file:/C:/WINDOWS/TEMP/temp2898TestWebDynproProj.ear
    Aborted: development component 'TestWebDynproProj'/'local'/'LOKAL'/'0.2007.04.02.13.17.28'/'0':
    Caught exception while checking the login credentials for SAP J2EE Engine. Check whether the SAP J2EE Engine is up and running.
    com.sap.engine.deploy.manager.DeployManagerException: ERROR: Cannot connect to Host: [EIMKOPDVS4] with user name: [Administrator]                     Check your login information.                     Exception is: com.sap.engine.services.jndi.persistent.exceptions.NamingException: Exception during getInitialContext operation. No server is running. [Root exception is com.sap.engine.services.security.exceptions.BaseLoginException: Exception in creating new RemoteLoginContext instance.]
         at com.sap.engine.services.jndi.InitialContextFactoryImpl.handleConnectionPropblem(InitialContextFactoryImpl.java:494)
         at com.sap.engine.services.jndi.InitialContextFactoryImpl.getInitialContext(InitialContextFactoryImpl.java:363)
         at javax.naming.spi.NamingManager.getInitialContext(NamingManager.java:662)
         at javax.naming.InitialContext.getDefaultInitCtx(InitialContext.java:243)
         at javax.naming.InitialContext.init(InitialContext.java:219)
         at javax.naming.InitialContext.<init>(InitialContext.java:195)
         at com.sap.engine.deploy.manager.DeployManagerImpl.checkCredentials(DeployManagerImpl.java:2983)
         at com.sap.sdm.serverext.servertype.inqmy.extern.DeployManagerAuthMethodInvoker.invokeCheckCredentialsInternal(DeployManagerAuthMethodInvoker.java:51)
         at com.sap.sdm.serverext.servertype.inqmy.extern.ExternalMethodInvoker.invokeCheckCredentials(ExternalMethodInvoker.java:45)
         at com.sap.sdm.serverext.servertype.inqmy.extern.ExternalMethodInvoker.invokeCheckCredentials(ExternalMethodInvoker.java:32)
         at com.sap.sdm.serverext.servertype.inqmy.extern.EngineOnlineDeployerImpl.checkLoginCredentials(EngineOnlineDeployerImpl.java:173)
         at com.sap.sdm.serverext.servertype.inqmy.extern.EngineApplOnlineDeployerImpl.performDeployment(EngineApplOnlineDeployerImpl.java:167)
         at com.sap.sdm.serverext.servertype.inqmy.extern.EngineDeployerImpl.deploy(EngineDeployerImpl.java:96)
         at com.sap.sdm.serverext.servertype.inqmy.EngineProcessor.executeAction(EngineProcessor.java:224)
         at com.sap.sdm.app.proc.deployment.impl.PhysicalDeploymentActionExecutor.execute(PhysicalDeploymentActionExecutor.java:60)
         at com.sap.sdm.app.proc.deployment.impl.DeploymentActionImpl.execute(DeploymentActionImpl.java:186)
         at com.sap.sdm.app.proc.deployment.controllers.internal.impl.DeploymentExecutorImpl.execute(DeploymentExecutorImpl.java:48)
         at com.sap.sdm.app.proc.deployment.states.eventhandler.ExecuteDeploymentHandler.executeAction(ExecuteDeploymentHandler.java:83)
         at com.sap.sdm.app.proc.deployment.states.eventhandler.ExecuteDeploymentHandler.handleEvent(ExecuteDeploymentHandler.java:60)
         at com.sap.sdm.app.proc.deployment.states.StateBeforeNextDeployment.processEvent(StateBeforeNextDeployment.java:127)
         at com.sap.sdm.app.proc.deployment.states.InstContext.processEventServerSide(InstContext.java:73)
         at com.sap.sdm.app.proc.deployment.states.InstContext.processEvent(InstContext.java:59)
         at com.sap.sdm.app.sequential.deployment.impl.DeployerImpl.doPhysicalDeployment(DeployerImpl.java:120)
         at com.sap.sdm.app.sequential.deployment.impl.DeployerImpl.deploy(DeployerImpl.java:89)
         at com.sap.sdm.apiimpl.local.DeployProcessorImpl.deploy(DeployProcessorImpl.java:74)
         at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
         at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
         at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
         at java.lang.reflect.Method.invoke(Method.java:324)
         at com.sap.sdm.is.cs.remoteproxy.server.impl.RemoteProxyServerImpl.requestRemoteCall(RemoteProxyServerImpl.java:127)
         at com.sap.sdm.is.cs.remoteproxy.server.impl.RemoteProxyServerImpl.process(RemoteProxyServerImpl.java:38)
         at com.sap.sdm.apiimpl.remote.server.ApiClientRoleCmdProcessor.process(ApiClientRoleCmdProcessor.java:84)
         at com.sap.sdm.is.cs.session.server.SessionCmdProcessor.process(SessionCmdProcessor.java:67)
         at com.sap.sdm.is.cs.cmd.server.CmdServer.execCommand(CmdServer.java:76)
         at com.sap.sdm.client_server.launch.ServerLauncher$ConnectionHandlerImpl.handle(ServerLauncher.java:286)
         at com.sap.sdm.is.cs.ncserver.NetCommServer.serve(NetCommServer.java:43)
         at com.sap.sdm.is.cs.ncwrapper.impl.ServiceWrapper.serve(ServiceWrapper.java:39)
         at com.sap.bc.cts.tp.net.Worker.run(Worker.java:50)
         at java.lang.Thread.run(Thread.java:534)
    Caused by: com.sap.engine.services.security.exceptions.BaseLoginException: Exception in creating new RemoteLoginContext instance.
         at com.sap.engine.services.security.remote.login.RemoteLoginContextExt.<init>(RemoteLoginContextExt.java:34)
         at com.sap.engine.services.jndi.implclient.LoginHelper.clientSideLogin(LoginHelper.java:81)
         at com.sap.engine.services.jndi.InitialContextFactoryImpl.getInitialContext(InitialContextFactoryImpl.java:355)
         ... 37 more
    Caused by: java.io.EOFException: End of stream is reached unexpectedly during input from Socket[addr=/10.4.71.36,port=50104,localport=3057]
         at com.sap.engine.services.rmi_p4.Connection.run(Connection.java:420)
         ... 1 more
    (message ID: com.sap.sdm.serverext.servertype.inqmy.extern.EngineApplOnlineDeployerImpl.checkLoginCredentials.DMEXC)
    Deployment exception : The deployment of at least one item aborted

    Hi,
    Check if the server is running. If so, try restarting it and then retry.

  • Error message "Error when scheduling the query(JOB_CLOSE)".

    Hi all,
    While using query extractor (rscrm_bapi) I am getting error message "Error when scheduling the query(JOB_CLOSE)".
    Could you please find what this error is?
    Thanks,
    Uday.

    Hi Uday,
    This problem can occur if you changed the query definition.
    In this case the query definition would be inconsistent with the existing extract structure.
    Certain Meta information is maintained with each extract defined using the RSCRM_BAPI. If the definition of the query is changed and you need to use the same extract table then you need to delete the extract using the report RSCRMBW_DEL_ALL_EXTRACTS selecting the extract you want
    to delete.
    After this you could use the same table name for any further extract that you need to create.
    One caution is that the extract table should not be deleted through any other transaction before you run the report.
    Rgds,
    Colum

Maybe you are looking for