While processing MIGO "No Item Catagory exists Table T184L HID NORM V"
Hi
Stuck in MIGO , Po created with and while processing MIGO I am getting the following error."No Item Catagory exists Table T184L HID NORM V)
I am using Retail , maintained Item catagory group but still I am facing with this error ..
Issue Solved with T Code 0184
Edited by: SHESAGIRI.G on May 10, 2008 2:56 AM
Similar Messages
-
In MIGO I have error."No Item Catagory exists Table T184L HID NORM V)
Hi
Stuck in MIGO , Po created with and while processing MIGO I am getting the following error."No Item Catagory exists Table T184L HID NORM V)
I am using Retail , maintained Item catagory group but still I am facing with this error ..Resolved the issue with 0184
-
No item category exists (Table T184L HID V )
HI ALL
GETTING THIS ERROR WHEN CARRYING OUT MIGO FOR INBOUND DELIVERY.
PLEASE GUIDE
REGARDS
REDDYDear Thaman,
Kindly go through the following links
Error in GR(No item category exists (Table T184L HID V ))
http://sap.ittoolbox.com/groups/technical-functional/sap-log-mm/error-while-posting-gr-933507
hpoe it will help..
Rgds,
Kareena
Edited by: Kareena Kapoor on Apr 14, 2010 2:08 PM -
Error in GR(No item category exists (Table T184L HID V ))
Hi,
While doing GR for stock material the below error appears
No item category exists (Table T184L HID V )
Please help.
Urgent.
Points will be rewarded.
RegardsHi,
Sales View not there for the Material.
Material Type is HIBE.
While posting MIGO,below before saving 'DELIVERY BEING PREPARED' appears then the above error appears.
Please reply.
Regards -
Error :Inbound Delivery "No item category exists (Table T184L DIG NORM V )"
Dear Guru's,
When I try to create an inbound Delivery for an SA i am getting the following error "No item category exists (Table T184L DIG NORM V )" . My problem is, it suppose to look for Delivery Type: EL instead of DIG. I dont know why its look for DIG, can some one point where i am making the mistake?
I am sure that i should be looking for Delivery Type : EL and Item Category : ELN (for Delivery)
Please advice...
Regards,
KumarDear Kumar ,
Please check the itemcategory determination for the delivery type DIG in 0184 transaction for combination.
Delivert type+Norm -
>Itemcategory
For Example :- DIG + NORM---->DIGN
I hope this will help you,
Regards,
Murali. -
Error while creating I/B delivery: No item category exists (Table T184L EL)
Hello all,
When I save output type "SPED" in outbound delivery, Inbound delivery automatically gets created.
But in this case error occured:
"No item category exists (Table T184L EL NLAG V )"
1. Specified material is HALB.
2. Item Cat in MMR is NORM
3. in Table T184 for "Delivery item Category Determination", configuration for EL NLAG V is NOT exists. But EL NORM V is exists
4. Testing for the SAME material in Test server is PERFECT. I/B delivery created automatically. Master data in Test system is replica of Production system.
Then where is the wrong....????
Could any one help on this?
Thanks
TusharPlease have a look at your material. In material master there's a so called item category group (MARA-MTPOS_MARA and MVKE-MTPOS; these are on sales 2 view).
Please compare the value in this field in the materials used in test (NORM?) and production system (NLAG?).
This is one factor in item category determination as you can see in table T184L.
Edited by: Csaba Szommer on Jul 19, 2010 2:18 PM -
No item category exists (Table T184L HOD V)
Hi,
When I'm trying to reverse a goods receipt for a PO I'm getting the error as follows.
No item category exists (Table T184L HOD V)
Message no. VL320
Diagnosis
There is no item category available in item category determination in the delivery (table T184L) for the following entries: HOD V
System Response
The system does not allow further processing of this item.
Procedure
Specify the appropriate item category for the above mentioned entries or inform your system administrator.
This is a WM and HU managed scenario. Please advise how to overcome the error
Regards,
AshwinYou are receipting goods through inbound delivery right ?.Please maintain below missing configuraion against your delivery type.
SPRO>Logistics Execution>Shipping>Deliveries>Define Item Category Determination in Deliveries.
Maintain here HOD V then you can do receipt. -
ERROR : No item category exists (Table T184L LB VERP )
There is a error log "No item category exists (Table T184L LB VERP ) " when i try to create outbound delivery to subcontractor vendor via TCode ME2O.
I already add item category LB VERP via TCode 0184, but it still error.
Could anyone help me please
Thanks & Best Regards,
Saiful arifHi Arif,
Did you define delivery item category for LB VERP record in transaction 0184?
Regards,
Csaba
Edited by: Csaba Szommer on Oct 28, 2008 10:32 AM -
Error while doing GR 561 - No item category exists (Table T184L DIG WMPP )
Hi,
I am doing 561 to Finished goods St loc which is WM enabled and getting the above error.
Question - I don't have authorization to check or change the item category. How do I receive goods to this St loc? I tried transfering stock from another location, but system does not allow that as well.
While doing 561, system creates an inbound delivery in the background. At that time it checks for item category and fails.
Any way I can post stock to this st loc?561 movment is only to be used for stock load at GO-Live date, not beyond, as its offset account is usually an account that is specially defined for initial inventory postings.
Can it be that you are using decentralized WM (because of the inbound delivery) ?
Without customizing you are not able to sove that problem, except you are using movement types that are allowed and setup well.
Maybe you should explain why you think that you need to add stock with 561´ -
Error in bapi while changing and add items in transparant table
data : t_poitems type standard table of bapimepoitem,
t_poitemx type standard table of bapimepoitemx,
w_poitems type bapimepoitem,
w_poitemx type bapimepoitemx,
t_return type standard table of bapiret2,
w_return type bapiret2.
loop at t_modify_detail into w_modify_detail-ebeln. * populating changing data
*--&modifying fields
w_poitems-po_item = w_modify_detail-ebelp.
w_poitems-material = w_modify_detail-matnr.
append w_poitems to t_poitems.
w_poitemx-po_item = w_modify_detail-ebelp.
w_poitemx-po_itemx = 'X'.
w_poitems-material = 'X'.
append w_poitemx to t_poitemx.
endloop.
call function 'BAPI_PO_CHANGE'
exporting
purchaseorder = w_header-ebeln
POHEADER =
POHEADERX =
POADDRV
tables
return = t_return
poitem = t_poitems
poitemx = t_poitemx
POADDRDELIVERY =
call function 'BAPI_TRANSACTION_COMMIT'
EXPORTING
WAIT
ERROR IS:
giving error : cl_po_item_handle_mm.................cp
function in which error showing: mepo docitem_getCheck this sample code
http://www.sap-img.com/abap/sample-abap-code-on-bapi-po-change.htm
BAPI PO CHANGE with MENGE
Hope it helps to identify your requirement and fix accordingly.
ashish -
Sales order BAPI giving error - No item category available (Table T184 ...
I am trying to create a sales order from a portal application using BAPI_SALESORDER_CREATEFROMDAT2. For certain type of materials, an error message is coming like:
No item category available (Table T184 ZOR NORM PSA1 ZSME) ZOR
Error
in VBAPKOM 000020 VBAPKOM
Item 000030 does not exist 000030
Sales
document was not changed
I have checked in vov4 and consulted SD consultant. The vov4 settings are set as below and our SD consultant says they are ok and need not be changed, as when we are creating this order in SAP, it is a success.
ZOR NORM PSA1 ZSME
ZOR NORM PSA2 ZSME ZSHP
ZOR NORM PSHP ZTAX
Now, the standard code where this error is coming is calling a function module "RV_VBAP_PSTYV_DETERMINE" which checks for the higher level item category. The material at item 10 meets the criteria, but material at item 20 fails as PSA1 does not have any such row (above) indicating higher level iteam.
Interesting thing is when I try to create the order in SAP with these materials, it creates the order. There is also a material substitution rule in place, which also seems to be working fine.
Debugging the standard code has not yet given any result.Since you had indicated the VOV4 settings, I presume, the item category ZSME is maintained under the tab "DfItC".
On your comments,
For certain type of materials, an error message is coming like:
I feel, the root cause of the issue is Item Category Group in material master. Check for those which creates an issue with the one which is running successfully.
thanks
G. Lakshmipathi -
Line items are not appearing while processing F-44
With transaction F-44, to clear vendor account, the system displays only one open item, whereas there are 2 open items on the line item report (FBL1N). Further there are two line items in BSIK.
Please helpHello,
There are two line items in the Vendor account, the details are as follows:
Date Amount PK DR/Cr
31.03.2008 12,050.00 38 Cr
05.06.2008 12,050.00 28 Dr
of above while processing F-44, we are able to see only debit item dated 05.06.2008.other line item is not appearing. When tried by putting document number, it says "NO OPEN ITEMS FOUND" -
Error while doing MIGO for a sub-contracted item
Hello to Everybody,
I am facing below problem -
Error : Incorrect CCtr <Cost Center Code> with this account (CCtr category must=D) for
<Item Code> , while doing MIGO. (for receiving sub-contracted item from vendor).
May I request for possible solution to above error ?
regards,Dear Sanjay,
You can determine the cost object for the posting of the costs in the transaction OKB9.
Following thread should resolve this issue:
Re: cost of subcontracting
Regards,
Naveen. -
Error for the fact table while processing the cube - attribute key cannot be found when processing
Please help as I am new to SSAS and this is urgent requirement. This is a MOLAP cube and below is the error that I am receiving when processing the cube. The cube is set to Prrocess Full. Several similar errors are popped up for various dimensions.
"Errors in the OLAP storage engine: The attribute key cannot be found when processing: Table: 'Fact_Table', Column: 'ID', Value: '1'. The attribute is 'Id'. Errors in the OLAP storage engine: The attribute key was converted to an unknown member because
the attribute key was not found. Attribute Id of Dimension: 17 - Ves - PoC Cont from Database: DB, Cube: IPNCube, Measure Group: iSrvy, Partition: Partition1, Record: 1."
Thanks in advance.Thanks for the recommendations David.
It will be really great if you can clear some of my doubts:
To my information, all the dimensions need to be processed first and then the fact table will be processed.
So if the ID's are not present in the dimension tables, then it should not be present in the Fact table either.
Here we found null values in the dimension table and the ID's were present in the Fact table. What might be the reasons causing such situation?
Also how frequently the cube needs to be processed? Currently the ETL which processes the cube, is scheduled in a SQL Job Agent on hourly basis everyday.
Is there any possibilty that the cube might be under processing state and the SQL job for the next run getting executed trying to access and process the cube while it was still processing? -
J_1IRG23D Table was not updated With Correct Values While Doing MIGO
Hi Friends,
I am new to the Excise duty , facing a proble in CIN -While doing MIGO, the Excise Calculation are coming correct values (i.e 10% ),but in the table it was not updated correctly (J_1IRG23D) only one entry is showing wrong ,the other entries in the table are correct.
In table -J_1IEXCDTL the EXBED it was with correct value 10% of the Base value
But In table -J_1IRG23D the EXBED,ADE,CESS It was updated with 0.06% on the base value .its gives wrong value
Kindly help in this issue.
Regards
SivaHi,
Go to T Code - J2I5 (not 215 it is j 2 i 5) enter details and select register PLA Check box and execute. This can be extracted many times - no problem.
After J2i5 balance will update in registers including tables.
Ramesh
Maybe you are looking for
-
I bought the movie Oblivion in iTunes and can watch it on my Samsung TV via Apple TV with no problems. Then I bought the movie "The Bourne Legacy" and it cannot be shown because supposedly my hardware is not HDCP compatible. All my hardware is HDCP c
-
Comment synchroniser ma boite hotmail sur mon Mac Book Pro
J'ai enregistré sur mon mac Book Pro mon adresse Hotmail sur Mail pour pouvoir reçevoir mes emails sur mon ordi, mais mes dossiers ne s'affichent pas et les messages que je supprime sur Mail ne se suppriment pas sur ma boite mail. Bref la synchronisa
-
Can I receive instructions to migrate my Pages & Numbers software from my old MacBook Pro to this computer MacBook Air? Thank you.
-
How DB adapter works when polling strategy is "remove row selected"?
How DB adapter works when polling strategy is "delete the rows that were read"? I want to know how database adapter works when polling startegy is "remove row".This polling strategy helps for polling the changes to table and remove records after new
-
How can I count in Joins?
Hello, I have the following table definitions: --- Tables CREATE TABLE group_test (ID number NOT NULL, group_name varchar2(20)); ALTER TABLE group_test ADD (CONSTRAINT group_test_p primary key (ID)); CREATE TABLE member_of_groups (group_test_id numbe