While reading mail, touched screen and content turned into "Chinese"--on server too!

I cannot now read this email! I've also had problems where I accidentally touch the screen and the email is deleted form the iphone, but I am able to get it off the server. This is a huge problem--as essential email from someone whose address I don't have. Thanks.

OK sorry, I figured out what happened. I somehow moved the message to deleted iems on the server. I don't know how I did that but at least I was able to retreive it. Now if you tell me how to delete this message, I will.

Similar Messages

I bought an iPod touch 4g and I plugged into my Mac to put some songs from iTunes on to it but then my screen went black then flickered then turned to a USB cable pointing towards a iTunes music note what could I do to fix it.

I bought an iPod touch 4g and I plugged into my Mac to put some songs from iTunes on to it but then my screen went black then flickered then turned to a USB cable pointing towards a iTunes music note what could I do to fix it.

See the More Like This Section on the right...

My ipod shows a blue screen and then turns off and wont turn back on. What should I do?

I turned on my iPod touch today and it turned on as usual. I unlocked it and went to play a game. I got tired of the game after about 5 mins so I went to the home screen. I swiped to the previous screen and it showed a blue screen after about 3 seconds. I was sort of surprised as this hadn't ever happened before. It didn't turn itself off so I pressed and held the power and home buttons. It turned off after three seconds. I tried to turn it back on but it wouldn't turn back on. I remembered about what someone said about pressing and holding the power button and the home button. I did so and as expected it turned back on. I unlocked it and the same thing happened again. Blue screen! I turned it off and tried the same thing again. Yet this time when it got to the lock screen, I pressed and held the power button and slid to power off. I didn't want to try turning it on again so I asked this question. WHY DOES MY IPOD SHOW A BLUE SCREEN? (Over and over agin every time I turn it on?) Please help!

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

How do I listen to music or radio while reading mail, etc?

How do I listen to music or radio while reading mail,etc.?

If you are using the Music App, or say, Pandora, all you do start a song or album and while you are listening, hit your home button once to go to your home page. The music will cointinue playing and then you touch your mail icon and read mail. The music will continue playing while you're reading mail. Just remember to close the Music when you're finished. To do so, double tap yourhome button and you'll the most recently used apps (task bar) on the bottom. With your finger, hold it on any app until they all start to jiggle. You'll see on the upper left side. Touch the minus and the app will fully close.

Downloading app seems to have crashed ,now have striped screen and wont turn off, tried the 2 button10sec trick but still nothing dturn off, tried the 2 button 10secill not turn off tried the 10sec two button trick still not working any suggestions please

while downloading apps seems to have crashed ,now have striped screen and wont turn off, treid the 2 button 10sec trick but still not responding any suggestions please ?

Try here:
iOS: Not responding or does not turn on
If not successful, let the battery fully drain. Then charge for an hour and try again.

TS2570 when i turn on my computer it stays on the grey screen and then turns off by itself. How can I fix that?

when i turn on my computer it stays on the grey screen and then turns off by itself. How can I fix that?

Hi , and a warm welcome to the forums!
Could be many things, we should start with this...
"Try Disk Utility
1. Insert the Mac OS X Install disc, then restart the computer while holding the C key.
2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu at top of the screen. (In Mac OS X 10.4 or later, you must select your language first.)
*Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.*
3. Click the First Aid tab.
4. Select your Mac OS X volume.
5. Click Repair Disk, (not Repair Permissions). Disk Utility checks and repairs the disk."
http://docs.info.apple.com/article.html?artnum=106214
Then try a Safe Boot, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot when it completes.
(Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive & clear caches.)
If perchance you can't find your install Disc, at least try it from the Safe Boot part onward.
If 10.7.0 or later...
Bootup holding CMD+r, or the Option/alt key to boot from the Restore partition & use Disk Utility from there to Repair the Disk, then Repair Permissions.
Hold alt or option key at bootup, do asny boot choices show up?

How do you fix an ipod that has a black screen and it turns on but when it turns on the screen gets a lighter black but you still can't see the apps or anything?

How do you fix an ipod that has a black screen and it turns on but when it turns on the screen gets a lighter black but you still can't see the apps or anything?

Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar
Apple will exchange your iPod for a refurbished one for this price. They do not fix yours.
Apple - iPod Repair price
A third-party place like the following maybe less. Google for more.
iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens
Replace the screen yourself if you are up to it
iPod Touch Repair – iFixit

Problems with Illustrator CC 2014 in Sony Vaio Fit 15A with N-Trig touch screen and digitizer pen.

Hello to everybody!
Some times ago Adobe has updated Illustrator to CC 2014 version and now it support touch pressure\pan\zoom in Windows 8 tablets. I have Sony Vaio Fit 15A with N-Trig touch screen and digitizer pen with pressure-sensitive support.
I was extremely disappointed that the brush in new version does not work correctly. Watch the video please that I did specifically for the demonstration.
I use Adobe Illustrator CS6 and Adobe Illustrator CC 2014 for comparison. In the old version the brush is works correctly. You must do a lot of clicks to start the brush in CC 2014 version (please see video). What causes of the problem? Please help me!

Hello to everybody!
Some times ago Adobe has updated Illustrator to CC 2014 version and now it support touch pressure\pan\zoom in Windows 8 tablets. I have Sony Vaio Fit 15A with N-Trig touch screen and digitizer pen with pressure-sensitive support.
I was extremely disappointed that the brush in new version does not work correctly. Watch the video please that I did specifically for the demonstration.
I use Adobe Illustrator CS6 and Adobe Illustrator CC 2014 for comparison. In the old version the brush is works correctly. You must do a lot of clicks to start the brush in CC 2014 version (please see video). What causes of the problem? Please help me!

Problem with reading data from screen and inserting in table

hi ther,
im new to abap-webdyn pro. can anyone suggest how to read data from screen and insert into table when press 'ADD' button.
i done screen gui , table creation but problems with action. what the content of acton add.
is ther any link that helps me or tut??
thankx in advance!
regards

Hi,
Create a context node for the screen fields for which you want to enter the values with cardinality 1.1.....
Now in the layout of your view bind the screen input fields to that context node(attributes) to the value property of the input fields...
Now in the action of ADD button....
--> go the wizard and select the read node button and select the node which you have created it generates the auto code for you.....
for example if the node is contains aone attribute like MATNR
reading the node from wizard will generate the code as....
DATA lo_nd_matnr TYPE REF TO if_wd_context_node.
DATA lo_el_matnr TYPE REF TO if_wd_context_element.
DATA ls_matnr TYPE wd_this->element_matnr.
DATA lv_matnr TYPE wd_this->element_matnr-matnr.
* navigate from <CONTEXT> to <MATNR> via lead selection
lo_nd_matnr = wd_context->get_child_node( name = wd_this->wdctx_matnr ).
* @TODO handle non existant child
* IF lo_nd_matnr IS INITIAL.
* ENDIF.
* get element via lead selection
lo_el_matnr = lo_nd_matnr->get_element( ).
* @TODO handle not set lead selection
IF lo_el_matnr IS INITIAL.
ENDIF.
* get single attribute
lo_el_matnr->get_attribute(
    EXPORTING
      name = `MATNR`
    IMPORTING
      value = lv_matnr ).
here the variable lv_matnr will contain the entered value......
now you can use this value for further process.
Thanks,
Shailaja Ainala.

My i pod classic shows a sad face on the screen and wont turn on at all will i need to sent it off to get repaired or how can i fix it thanks shiv

my i pod classic shows a sad face on the screen and wont turn on at all > will i need to sent it off to get repaired or how can i fix it thanks shiv

i have this same issue! have you figured out what to do?

HT4904 I need to repair my start up disc so I have to start up from installation disc. In doing so, my computer restarts, I hear the mac sound, then a grey screen and then turns off and goes on in this cycle endlessly. Why can't I restart from disc?

I need to repair my start up disc so I have to start up from installation disc. In doing so, my computer restarts, I hear the mac sound, then a grey screen and then turns off and goes on in this cycle endlessly. Why can't I restart from disc?

Booting From An OS X Installer Disc
1. Insert OS X Installer Disc into the optical drive.
2. Restart the computer.
3. Immediately after the chime press and hold down the "C" key.
4. Release the key when the spinning gear below the dark gray Apple
logo appears.
5. Wait for installer to finish loading.

When i unplugg my ipod lines appear across the screen and wont turn on how come?

when i unplugg my ipod lines appear across the screen and wont turn on how come?

Is it working properly when it is connected to power?
when i unplugg my ipod lines appear across the screen and wont turn on
Please clarify... Does the screen look "normal" (and is it turned "on") when connected? When you disconnect it, "lines appear across the screen"? If it "wont turn on," how are there lines (or anything) appearing on the screen?

I am trying to sync iphone 5 to itunes but it says "iTunes could not connect to the iphone as an error occured while reading from the device " and the iphone is not seen on itunes........

i am trying to sync iphone 5 to itunes but it says "iTunes could not connect to the iphone as an error occured while reading from the device " and the iphone is not seen on itunes........

First thing to try is to reset your device. Press and hold the Home and Sleep buttons simultaneously ignoring the red slider should one appear until the Apple logo appears. Let go of the buttons and let the device restart. And then reboot your computer.
See if that fixes your problem.

JME support for touch screen and vibration

Hi all, How are you?
I need to develop a application for mobile phone, and it is going to use the mobile touch screen and vibration features.
Does somebody know if there is an JME API, or JSR that provides access/control to Mobile's touch screen and vibration features?
Does somebody know if it is feasible to do it using JME?
I appreciate any help you can give,
thanks in advance,
Roger

to use the mobile touch screen javax.microedition.lcdui.Canvas methods
-- hasPointerEvents()
-- hasPointerMotionEvents()
-- pointerDragged(int x, int y)
-- pointerPressed(int x, int y)
-- pointerReleased(int x, int y)
and vibration features?javax.microedition.lcdui.Display method
-- vibrate(int duration)
Also see proprietary vibration etc. APIs for Nokia / SonyEricsson:
{color:#0000ff}http://www.wmlscript.it/j2me/nokia-UI-API-v11/com/nokia/mid/ui/DeviceControl.html
http://developer.sonyericsson.com/entry.jspa?externalID=108&categoryID=12{color}
db

Ihave a emac 1002 emc 1955 that igot from a auction,when i turn it on it never gets pass the loading screen and cant get into utilities

i have a emac 1002 emc 1955 that wont go pass loading screen and cant get into utilities,i got from a auction and dont want to take it apart if i dont have to so looking for a little help before it goes that far.thanks

Hi Mike, the Keyboard shouldn't matter, it should be OK in that respect.
Your kind of stuck without any Install Disc to try to repair it or reinstall, but...
Tough without the Install disc, but some things to try...
Does it boot to Single User Mode, CMD+s keys at bootup, if so try...
/sbin/fsck -fy
Repeat until it shows no errors fixed.
(Space between fsck AND -fy important).
Resolve startup issues and perform disk maintenance with Disk Utility and fsck...
http://docs.info.apple.com/article.html?artnum=106214
Tough without the Tiger Disk problems, but try fsck...
To use fsck, you must run it from the command line. Unlike using your mouse to open an application to do something, you'll need to type a text command at the prompt (#) to tell fsck what to do. The Terminal application (/Applications/Utilities) and single-user mode are two examples of command-line interfaces in which you can type such commands. To use fsck:
1. Start up your computer in single-user mode to reach the command line. Hold CMD+s keys down at bootup. Note: If necessary, perform a forced restart as described in the Emergency Troubleshooting Handbook that came with your computer. On desktop computers, you can do this by pressing the reset/interrupt button (if there is one) or holding down the power button for several seconds. On portable computers, simultaneously press the Command-Control-power keys. If your portable computer doesn't restart with this method, you may need to reset the Power Manager.
2. At the command-line prompt, type /sbin/fsck -fy
(SPACE between fsck AND -fy important)
3. Press Return. fsck will go through five "phases" and then return information about your disk's use and fragmentation. Once it finishes, it'll display this message if no issue is found: 
The volume (name_of_volume) appears to be OK  If fsck found issues and has altered, repaired, or fixed anything, it will display this message: ***** FILE SYSTEM WAS MODIFIED *****   Important: If this message appears, repeat the fsck command you typed in step 2 until fsck tells you that your volume appears to be OK (first-pass repairs may uncover additional issues, so this is a normal thing to do).
4. When fsck reports that your volume is OK, type reboot at the prompt and then press Return.
http://docs.info.apple.com/article.html?artnum=106214
Then Safe Boot, (holding Shift key down at bootup), & use Disk Utility from there to Repair Permissions, reboot once more.
Then Safe Boot from the HD, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot when it completes.
Does it boot into Open Firmware with CMD+Option+o+f ?
http://docs.info.apple.com/article.html?artnum=42642
reset-nvram (press Enter)
set-defaults (press Enter)
reset-all (press Enter)
Have you done a PRAM reset, CMD+Option+p+r...
http://docs.info.apple.com/article.html?artnum=2238

While reading mail, touched screen and content turned into "Chinese"--on server too!

Similar Messages

Maybe you are looking for