While recording a guitar do not record the output from other tracks

Hi all,
I'm an audition/recording newbie. I have Audition CC. I have recorded one guitar track. and now I'd like to record another one. The problem is that when I try to record it the output from the other one gets recorded as well. I do want to hear the output from the first track while recording track 2 but I want only to record my guitar playing in track 2.
Thank you.

The basic problem here is not actually caused by Audition, but by your sound device mixer, which appears to be letting you record everything you hear - so that will be the guitar part you are playing, and also the replayed tracks that you've already recorded. In Windows, the fix for this is generally to make sure that the recording source is set to be just the input you are using, and not 'what you hear' or whatever it is on your device. The playback part of the mixer should let you monitor both the wav playback and your source, which is what you need to be doing - it's only the record settings you need to look at.
If you are using a Mac though, I can't help you because I don't know anything about how they work from that POV, but I'd imagine that it must be similar.

Similar Messages

Want to record the output from one mac into another in real time

Here's what I'm trying to do, I'm not sure if it's possible:
I want to manipulate video clips (start, stop, pause, speed up, reverse, etc) on the regular timeline in FCP on a Macbook Pro. Then I would like to be able to capture that HD footage output via USB into another Macbook Pro, using either FCP or any other software (Quicktime, imovie) that might work. Is this possible? Or is there another way to do this using firewire or networking?

It is not HDMI...it is a high speed data port.
It is a slot on the left side of the computer, where the headphone jacks are. Older (two generations older) 15" and 17" models came standard with it. But the newer 15" models switched that slot to an SD card slot, and only the newer 17" models have Express34. If you have a newer MBP, you might not have that slot. If you have an SD slot there...then you don't have express34. In which case the only option for you is the AJA IO HD.
But not really. Because the IO HD takes over the firewire bus completely...meaning you cannot then connect a firewire drive to the system. ANd since playing video doesn't work over USB, and it might stutter on your system drive...this might not work.

How to bind value to lov based on the output from other lov

HI all, i have 2 message choice Lov, i am selected a value from the 1st lov based on this value i am a executing a query, i want to display one of the attribute value from the query result in the second LOV. i am getting the attribute value correctly but i dont know how to bind that(display) in the 2nd LOV(at runtime).

Read the dev guide LOV section, it should give you details about this implementation.

VSTS load test QUESTION : While recording the webPerformanceTest, is it is possible to clear / force to clear cachewithout stopping or closing the IE on recorder?

VSTS load test QUESTION : While recording the webPerformanceTest, is it is possible to clear / force to clear cache without stopping or closing the IE on recorder?
I am facing issue, while recording the webtest, our application first time loading any screen calls some requests and 2nd time when browsed the same information if it is available at cache then it will not
call the requests again.
How can i force the VSTS to clear cache while recording, so that i can record those requests which gets called at the first time.
Regards
SatishK

Hi SatishK,
Thanks for your reply.
>>but my question was while recording (During recording using web test recorder) i want to clear cache.
Based on your issue,
I did some research about it,
but I still find the official document about it. Generally, I know that if we want to clear the web performance test by the
Cashe Control properties, so I think that it is not possible to clear the cashes when we are recording the web performance.
If you still want to this feature for web performance test, I suggest you could submit this feature request:
http://visualstudio.uservoice.com/forums/121579-visual-studio. The Visual Studio product team is listening to user voice there. You
can send your idea there and people can vote. If you submit this suggestion, I hope you could post that link here, I will help you vote it.
Thanks for your understanding.
Best Regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Frm - 41337 - can not populate the list from record group

Hi
I have created a form with 4 combo boxes. And i am trying to populate the 4 combo boxes dynamically.
Here is my table structure.
BUS_FUNCTION VARCHAR2(500),
SEQ NUMBER,
STEP1 VARCHAR2(500),
STEP2 VARCHAR2(500),
STEP3 VARCHAR2(500),
STEP4 VARCHAR2(500),
KEYSTEP VARCHAR2(4000),
OBJ_NAME VARCHAR2(500),
SME VARCHAR2(50)
In the fist combo box i am retriving bus_function and second seq and third step1.
i wrote a trigger when_new_form_instance and i am calling a procedure from the trigger.
here is my procedure code.
PROCEDURE fp_get_list IS
l_sql_text VARCHAR2(2000);
BEGIN
l_sql_text := 'SELECT bus_function,bus_function FROM TABS_BUS_FUNC';
lp_populate_list('BUSFUNC.list22','rgcat2',l_sql_text);
l_sql_text := 'SELECT TO_CHAR(SEQ),TO_CHAR(SEQ) FROM TABS_BUS_FUNC';
lp_populate_list('BUSFUNC.BUS_FUNC','rgcat',l_sql_text);
l_sql_text := 'SELECT step1,step1 FROM TABS_BUS_FUNC';
lp_populate_list('BUSFUNC.list20','rgcat1',l_sql_text);
END;
Now the problem is i can able to get the values fro the first two colums. but the third column values are not populating.
i am getting an error frm - 41337 - can not populate the list from record group.
PLease help me in this.
Thanks in advance,
Raju

I got answer
i write a code in when-new-form-instance
declare
v_rg_id RECORDGROUP;
v_return number;
v_query varchar2(2000);
outcome number ;
begin
v_rg_id := CREATE_GROUP_FROM_QUERY('RG_LIST','select Dname,To_char(Deptno) deptno from dept');
v_return := POPULATE_GROUP(v_rg_id);
POPULATE_LIST('emp.deptno', 'RG_LIST');
end;
but remember property of list item must be mapping of others value null and initial value null
if ur problem not solve then tel me email, i ll send u fmb file

Record the output of a Plug In

Hi to all! I am new in music technology and to Logic Pro 8. I want to record the output of a Bus in which I have Inserted a plug in. please help. thanks again. Does anyone know a good place online with LogicPro tutorials???
thanx again

You can bounce the Bus via the Bounce menue by soloing all the tracks that are routed to it
or the Bus recording method
assign the output of the FX Bus to a recording Bus and choose that recording Bus as an Input for a new Audio track - this way you record the FX right into your project in realtime and don't have to import a bounced file.

When i delete an audio book from my computer it does not delete the book from my Iphone. it seems to be deleting the name from the computer but not the content. this has just started happening since the last itune progam updated. the result is i have

I record audio books from my library onto my old iPhone. I download the book from Overdrive to my computer. I connect the Iphone to the computer and transfer the audio-book to the iPhone. When I am done listening to the book i delete it from the iPhone by connecting it to the computer and doing a manual sync. this worked fine until the last i-tunes update on my computer. Now when the iPhone is connected and i tell the computer to delete a book it is only deleting the name of the book on the computer it is not deleting the book from the phone. The next time I connect the phone to the computer the program does not show the book in the phone but it is still in the phone. I have no more room on my phone to get any new books on it.
Does anyone know how to fix this? Please

You are correct. Syncing should transfer any purchased media, including videos, from your device to your iTunes library provided your computer is authorized for the Apple ID used to make these purchases. You mentioned that you have uninstalled iTunes before, but if you didn't follow this guide exactly, uninstalling iTunes and all of its components in the order specified, it may not have been successful so you should try again: Windows XP or Windows Vista/7.

The report can not retrieve the data from the DB

Dear all,
I am facing a problem is that i have ready designed reports in Crystal. While refreshing the report in Crystal, it gives an error that it can not retrive the information from the database. But, if i am using the application which the report is attached, it is giving me the results and showing the report in Crystal. Even, for testing if i add a new field, i have to run it from the application, but directly from the Crsytal Reports, it displays an error.
I hope you will help me in the issue.

Could you please provide more information:
What is the database? (Oracle, SQL Server, xml, etc.)
What type of connectivity? (ODBC, Native, OLE DB, etc)
Are application and Crystal Reports are running from the same machine?
What is the error message? Any error numbers?

HT3986 I installed windows 7 successfull, but when I start the mac in windows I does not see the wifi, and others things. How do I get the drivers?

I installed windows 7 successfull, but when I start the mac in windows I does not see the wifi, and others things. How do I get the drivers?
I remember that with Snow Leopard you could download them from the Apple website.
Cheers!

Read the Boot Camp Documentation while you run Boot Camp Assistant to download the Windows Support Software which was the first step in the Boot Camp Setup procedure.

Who worked with ICS' Model 4896 GPIB? I can not count the data from the module. Can prompt as it to make. It is desirable with examples (data read-out from the module and data transmission between channels. It is in advance grateful.

I can not count the data from the module. Can prompt as it to make. It is desirable with examples (data read-out from the module and data transmission between channels. It is in advance grateful.

Hello. Most of the engineers in developer exchange are more familiar
with NI products. Contacting ICS for technical support is a better
course of action.

Unfortunately, I lost by an update all the apps on my iPad 2. Now I can not pull the data from the cloud to my iPad. How is this possible?

Unfortunately, I lost by an update all the apps on my iPad 2. Now I can not pull the data from the cloud to my iPad. How is this possible?

If you just installed iCloud does that mean you updated the iOS that's running on your iPad? If so, you'll want to restore all the programs you have from the backup you hopefully made.
Refer to these articles for help.
iTunes: Backing up, updating, and restoring iOS software.
If you don't want to use iCloud, simply don't activate it.
You can also download the programs again.
If you live in a country that supports re-downloading apps then you can re-download them. You can refer to this article for more help.
Downloading past purchases from the App Store and iTunes Store
What to know if your country supports downloading past purchases?
iTunes in the Cloud Availability

Folder mapping with Unix XI box / XI is not pulling the file from folder

We have installed XI on Unix box. We have developed a test scenario using file adapter and tested the mapping program. it's executing successfully. Problem is after completion of configuration XI server is not pulling the file from the assigned folder. I think we need to map that network driver with the XI server. Hope my assumption is correct if not correct me and please help me to resolve the problem.
any help appreciated
Regards,
Venkat Bomma.

Well, I had the same problem once but I don't remember exatcly the solution...
I am pretty sure it's a post-installation activity (search in SDN or marketplace for the relevant Guide).
You can also find some useful information in this doc right here <a href="https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/08438c77-0501-0010-50a0-e39">How-To Monitor and Analyze Errors in the SAP J2EE Adapter Engine</a> starting from chapter 3.
Let me know if this helps. In the meantime I will dig in my memory...
Cheers,
Alex

Epub books show up in ipad on itunes but do not show up on ipad. Also can not delete the books from ipad in itunes

epub books show up in ipad on itunes but do not show up on ipad. Also can not delete the books from ipad in itunes

You have no choice but to lose your data back to the last backup you made.
Here's how to do the recovery. Note you may have to try to get into recovery mode more than once to succeed:
HT1808
I'm sure next time, you'll be more vigilant about keeping current backups.

Bursting Control file, Error!! Could not deliver the output for Delivery

Hi,
I am using bursting control file to send report output to email in R12.1.3.
If the report output is having data, it is working fine. if there is no data it is getting errored out with the below message.
"Error!! Could not deliver the output for Delivery channel:null "
In the report output i put "No data found", when i click on view output the output in application is showing as "NO DATA FOUND" in PDF .
"Bursting VMC Approved Purchase Orders for a period (XML Publisher Report Bursting Program)" got above error.
my requirement is if there is no data, still i require the output to email.
Thanks in Advance
Adina.

Hi,
I am facing the same situation and want the bursting program to finish in normal even when there is no data.
Can you please let me know how you resolved this?
Thanks
RG

Could not deliver the output for Delivery channel:null

XML Publisher Report Bursting Program is throwing the following exception
Log file
========
XML/BI Publisher Version : 5.6.3
Request ID: 11900899
All Parameters: Dummy for Data Security=Y:ReportRequestID=11900819:DebugFlag=Y
Report Req ID: 11900819
Debug Flag: Y
Updating request description
Updated description
Retrieving XML request information
Node Name:DB94
Preparing parameters
null output =/caop/app02/inst/apps/CAOP_db94/logs/appl/conc/out/o11900899.out
inputfilename =/caop/app02/inst/apps/CAOP_db94/logs/appl/conc/out/o11900819.out
Data XML File:/caop/app02/inst/apps/CAOP_db94/logs/appl/conc/out/o11900819.out
Set Bursting parameters..
Temp. Directory:/caop/app02/common/caopcomn/temp
[071713_110919401][][STATEMENT] Oracle XML Parser version ::: Oracle XML Developers Kit 10.1.3.1.0 - Production
[071713_110919410][][STATEMENT] setOAProperties called..
Bursting propertes.....
{user-variable:cp:territory=US, user-variable:cp:ReportRequestID=11900819, user-variable:cp:language=en, user-variable:cp:responsibility=21540, user-variable.OA_MEDIA=http://db172.coresys.com:17204/OA_MEDIA, burstng-source=EBS, user-variable:cp:DebugFlag=Y, user-variable:cp:parent_request_id=11900819, user-variable:cp:locale=en-US, user-variable:cp:user=PRAYAPUDI, user-variable:cp:application_short_name=XDO, user-variable:cp:request_id=11900899, user-variable:cp:org_id=0, user-variable:cp:reportdescription=Care One Salary Change Approval, user-variable:cp:Dummy for Data Security=Y}
Start bursting process..
Bursting process complete..
Generating Bursting Status Report..
Output File
========
<?xml version="1.0" encoding="UTF-8" ?>
- <BURS_REPORT>
<REQUESTID>11901286</REQUESTID>
<PARENT_REQUESTID>11901285</PARENT_REQUESTID>
<REPORT_DESC>Care One Salary Change Approval</REPORT_DESC>
<OUTPUT_FILE>/caop/app02/inst/apps/CAOP_db94/logs/appl/conc/out/o11901286.zip</OUTPUT_FILE>
- <DOCUMENT_STATUS>
<KEY />
<OUTPUT_TYPE>EXCEL</OUTPUT_TYPE>
<DELIVERY>email</DELIVERY>
<OUTPUT>/caop/app02/common/caopcomn/temp/071713_120851408/xdo1_2.xls</OUTPUT>
<STATUS>fail</STATUS>
<LOG>Error!! Could not deliver the output for Delivery channel:null . Please check the Log for error details..</LOG>
</DOCUMENT_STATUS>
</BURS_REPORT>
XML File
======
<?xml version="1.0" encoding="ISO-8859-1"?>

<CAO_SAL_CHG_APR>
<LIST_G_EMAIL>
    <G_EMAIL>
      <EMAIL>[email protected]</EMAIL>
      <LIST_G_MESSAGE_NUMBER>
<G_MESSAGE_NUMBER>
          <MESSAGE_NUMBER>1</MESSAGE_NUMBER>
          <PERCENT_CHANGE>-98.75</PERCENT_CHANGE>
          <SALARY_CHANGE_AMT>-23,621.00</SALARY_CHANGE_AMT>
          <DATE_CHANGE_MADE>07/16/2013</DATE_CHANGE_MADE>
          <APPROVER_NAME>Veluz, Cynthia Avila</APPROVER_NAME>
          <APPROVER_JOB>Administration|Center|Payroll/Benefits Coordinator</APPROVER_JOB>
          <PERSON_NAME>Donet, Andrew P</PERSON_NAME>
          <PERSON_NUM>131996</PERSON_NUM>
          <LOCATION_CODE>HR - CareOne at Morris ALF</LOCATION_CODE>
          <REGION_2>NJ</REGION_2>
          <JOB_TITLE>Administration|Center|Director of Admissions</JOB_TITLE>
          <CURRENT_ANNUAL_SAL>299.00</CURRENT_ANNUAL_SAL>
          <PREVIOUS_ANNUAL_SAL>23,920.00</PREVIOUS_ANNUAL_SAL>
          <PAY_BASIS>PERIOD</PAY_BASIS>
          <CUR_PAY>11.50</CUR_PAY>
          <CHANGE_DATE>07/21/2013</CHANGE_DATE>
          <SALARY_CHANGE_REASON></SALARY_CHANGE_REASON>
          <EMPLOYMENT_CATEGORY>Fulltime-Regular</EMPLOYMENT_CATEGORY>
          <ERIC_WILLIAMS>[email protected]</ERIC_WILLIAMS>
        </G_MESSAGE_NUMBER>
      </LIST_G_MESSAGE_NUMBER>
    </G_EMAIL>
</LIST_G_EMAIL>
</CAO_SAL_CHG_APR>
Control File
========
<?xml version="1.0" encoding="UTF-8" ?>
<xapi:requestset xmlns:xapi="http://xmlns.oracle.com/oxp/xapi" type="bursting">
<xapi:request select="CAO_SAL_CHG_APR/LIST_G_EMAIL/G_EMAIL">
<xapi:delivery>
<xapi:email server="smtp.coresys.com" port="25" from="[email protected]" reply-to="[email protected]">
<xapi:message id="123" to="[email protected]"
attachment="true"
subject="Salaries Changed Yesterday">
Please do not reply to this email, it is system-generated.
</xapi:message>
</xapi:email>
</xapi:delivery>
<xapi:document output="Care_One_Salary_Change_Approval" output-type="EXCEL"   delivery="123">
<xapi:template type="rtf" location="xdo://CAO.CAO_SAL_CHG_APR.en.US/?getSource=true">
</xapi:template>
</xapi:document>
</xapi:request>
</xapi:requestset>
It is greatly apprecaited, if you can take a look the issue.
Thank you,
-Pradeep.

Hello Sir,
I am hard coding the Email id in the control file. From/To/CC emails I have hard coded. I want to paste the Control file... But I could not because, not allowing me to post XML content.
Thanks
<?xml version="1.0" encoding="UTF-8"?>
<xapi:requestset xmlns:xapi="http://xmlns.oracle.com/oxp/xapi">
     <xapi:request select="/EMPLOYEE_REPORT/EMPLOYEE">
          <xapi:delivery>
               <xapi:Email server="mycompanyserver" port="25" From="[email protected]" reply-to ="[email protected]">
                    <xapi:message id="123" to="[email protected]" cc="[email protected]"
                         attachment="true" subject="Employee Details for ${FULL_NAME}"> Mr./Ms. ${FULL_NAME}, Please review the attached document
                    </xapi:message>
               </xapi:email>
</xapi:delivery>
<xapi:document output-type="pdf" delivery="123">
     <xapi:template type="rtf" location="xdo://XBOL.TEST_ABC_XML.en.US/?getSource=true">
     </xapi:template>
</xapi:document>
</xapi:request>
</xapi:requestset>
Edited by: user9367932 on Apr 13, 2010 4:59 AM
Edited by: user9367932 on Apr 13, 2010 4:59 AM

While recording a guitar do not record the output from other tracks

Similar Messages

Maybe you are looking for