WHILE RESTORING I PHONE 4S SHOWING ERROR 2009

FIRST MY I PHONE 4S SHOWS SEARCHING  IN NETWORK EITHER THERE IS SIM OR NOT. LATER WHEN I APPORCH TO SERVICE CENTER THEY SAID MY PHONE IS SHOWING ERROR  -1. BUT NOW IT SHOWING ERROR 2009. NOT UNDERSTANDING WAT TO DO

http://support.apple.com/kb/TS3694
you can read this for a list of all error codes.
the codes you listed were 1 and 2009
error code 1 means: Attempt to restore your iOS device two more times. If the issue is still unresolved, the device may need service.
error code 2009 means:
If you experience this issue on a Mac, disconnect third-party devices, hubs, spare cables, displays, reset the SMC, and then try to restore. If you are using a Windows computer, remove all USB devices and spare cables other than your keyboard, mouse, and the device, restart the computer, and try to restore. If that does not resolve the issue, try the USB issue-resolution steps and articles listed for Error 1604 above. If the issue persists, it may be related to conflicting security software. If the errors persist on another computer and known-good USB cable, the device may need service.
hope this helps you

Similar Messages

  • While restoring my iphone3gs it shows error(-1) and cant get out from restore mode,kindly suggest me??

    Kindly suggest me how can i get out of the restore mode bcoz whenever i want to do it it shows error (-1) before complition....

    Try:
    - Powering off and then back on your router.
    - Anything else here
    iTunes for Windows: iTunes cannot contact the iPhone, iPad, or iPod software update server
    - Change the DNS to either Google's or Open DNS servers
    Public DNS — Google Developers
    OpenDNS IP Addresses
    - Try on another computer/network
    - Wait if it is an Apple problem

  • TS3694 how can i solve my problem while updateing my i phone its shows error 3194

    when i update my any i phone. it shows error 3194. please sugest me how can i solved this error.

    From the article that the question was posted from:
    Unable to contact the iOS software update server gs.apple.com
    Error 1004, 1013, 1638, 3014, 3194: These errors may be the result of the connection to gs.apple.com being redirected or blocked. Follow these steps to resolve these errors:
    Install the latest version of iTunes.
    Check security software. Ensure that communication to gs.apple.com is allowed. Follow this article for assistance with security software. iTunes for Windows: Troubleshooting security software issues.
    Check the hosts file. The restore will fail if there is an active entry to redirect gs.apple.com. Follow iTunes: Advanced iTunes Store troubleshooting to edit the hosts file or revert to a default hosts file. See section "Blocked by configuration: (Mac OS X/Windows) > Rebuild network information".
    Try to restore from another known-good computer and network.
    If the errors persist on another computer, the device may need service.

  • HT201210 i upgraded my iphone4 to ios 6.0.1 but my phone reset it self and its in recovery mode & every time i try to restore my phone its saying error 2001 or 2006 & my lock button is broken so i cant put my phone in dfu mode what im i suppose to do help

    i upgraded my iphone4 to ios 6.0.1 but my phone reset it self and its in recovery mode & every time i try to restore my phone its saying error 2001 or 2006 & my lock button is broken so i cant put my phone in dfu mode what im i suppose to do help me pleas

    Hi, to get your iPhone  4 back to normal, here're two ways for you.
    1.  Use Dr.Fone for iOS. The free trial version can fix iPhone screen of death. The free trial version can do that, you don't have to pay.
    Just download and install this software on your computer and connect your iPhone 4 to computer with a USB cable. When it detects your iPhone 4 is abnormal, click Restart the device to get your iPhone 4 to be normal.
    2. Use iTunes to fix it.
    Step 1. Make sure that the latest iTunes is installed on your computer.
    Step 2. Plug into a USB cable to connect your iPhone4 to computer.
    Step 3. Press and hold the Home button and the Sleep/Wake button at the same time for about 10s.
    Step 4. 10 seconds later, release the sleep/wake button. But continue to hold the home button until a message comes out, saying "iTunes has discovered an iPhone 4 in recovery mode, you must restore this iPhone before it can be used with iTunes".
    Step 5. Click your iPhone 4 in the left sidebar to show the device control panel on the right. Then, click Summary.
    Step 6. Go to Backups section and click Restore Backup.... In the drop-down list, choose a backup file and restore to your iPhone 4

  • While trying to run it show error message : "The application or DLL C:\Program Files\Mozilla Firefox\sqlite3.dll is not a valid Windows image. Please check this against your installation diskette

    Just updated firefox. While trying to run it show error message : "The application or DLL C:\Program Files\Mozilla Firefox\sqlite3.dll is not a valid Windows image. Please check this against your installation diskette." Tried to download and install new firefox, but it alway show that the file is corrupt
    == Today ==
    == User Agent ==
    Mozilla/4.0 (compatible; MSIE 7.0; Windows NT 5.1; .NET CLR 1.1.4322; .NET CLR 2.0.50727; .NET CLR 3.0.4506.2152; .NET CLR 3.5.30729; InfoPath.2)

    Do a clean reinstall and download a fresh Firefox copy from http://www.mozilla.com/firefox/all.html and save the file to the desktop.
    Uninstall your current Firefox version and remove the Firefox program folder before installing that copy of the Firefox installer.
    It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.
    You can skip the step to create a new profile, that is not necessary for this issue.
    See http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Clean_reinstall

  • HT201263 i have iphone 3gs, after restoring my phone it shows only apple logo please help me

    i have iphone 3gs, after restoring my phone it shows only apple logo please help me

    See your other post on this Topic...
    https://discussions.apple.com/message/22315227#22315227

  • While doing MIGO transaction system showing error: Check table169P the entr

    Hi experts,
    while doing MIGO transaction system showing error: Check table169P the entry BP01 does not exit.
    pls do needful.
    Thanks&Regards
    sreenivas.p

    Hi,
    Please specify Whether you are doing Blocking of Invoices or what?
    As the T169P is A Parameters Invoice Verification, so you can check the values for T169P table in SE16 so that you will get Clear idea regarding  company code BP01 in which the stochastic block is active with Threshold value for stochastic block...
    Please check....
    For maintaining Entries please go to OMRG maintain Company code and Threshold value as per client requirement so that This will specifies the degree of probability that an invoice is stochastically blocked.
    Regards,
    Ninad Kshirsagar

  • I just bought an iphone 4s. phone service and wifi kept disconnecting and so i restored the phone. i had error code 1645 and 1602. so i stopped the restore. but now my iphone is stuck in the restore screen and is not recognised by itunes or com

    I just bought an iphone 4s. phone service and wifi kept disconnecting and so i restored the phone. i had error code 1645 and 1602. so i stopped the restore. but now my iphone is stuck in the restore screen and is not recognised by itunes or com

    i have restarted my com, re-installed itunes and repeatedly tuned on and off my iphone to no avail. please help!!!

  • HT201263 while restoring iphone 3g its showing  unknown error occured

    while restoring my iphone 3g its showing an unknown error occured .

    And you placed it in Recovery Mode, and then what happened?

  • I tried update my software on iPhone4 but my apps started crashing and now after a restore my phone wont show up in my comp or itunes. can I set it up as new and get my old stuff back later?

    I tried updating my phone to the iOS5 software. I was over the max capacity of the space in my phone so the uodate failed. After attempting this the apps in my phone wouldn't open. As soon as I click on them the screen would go blank and either stay black or go back to the home screen. Turning my phone off didn't work so the only choice I was able to find was to give my phone a hard reset. This action failed so next I backed up my files and restored my phone. NOW I'm stuck because the phone will not show in windows (xp) OR in iTunes.
    My phone is now set in restore mode as to if I want to set it up as a new phone or back up from icloud or itunes, neither of the last two work. If I set up my phone as new, will I be able to reback up my phone to the previous data I had before I restored it? I really don't want to lose any pics or contacts I had.
    I've been working on this for 5 hours!! I've been to every site and tried any and every tip I could from apple to fix the problem and have had NO success

    If the device is not being detected in iTunes, has a different USB port or sync cable been tried?  What about a reboot of the comptuer?
    As for pictures/videos taken with the device, they are designed to be copied to a computer on a regular basis.  Did you choose to not do this prior to attempting the update?  They may be lost at this point (although they should be in the backup, but no guarantees).

  • HT201263 After following the steps above I get an error while restoring my Iphone. The error code is 1 or -1. Please suggest what should I do to resolve this problem

    After following the restore steps. I get an error while restoring Iphone. error code is 1 or -1. Please suggest what should I do to resolve this problem.

    Error 1 or -1
    This may indicate a hardware issue with your device. Follow Troubleshooting security software issues, and restore your device on a different known-good computer. If the errors persist on another computer, the device may need service.
    http://support.apple.com/kb/TS3694

  • Why my phone Id show error in the I-message address?!

    My I-message can only show the email address. Yet my phone Id show as error. It show as grey(can't change or do anything on it).
    Anybody know how to solve it?!

    http://support.apple.com/kb/ts2755

  • Need help urgent,my iphone is stuck at connect to itunes screen.when i restore with itunes it shows error -1. please help me

    need help urgent, my iphone is stuck at connect to itunes screen, when i restore it using itunes, it shows error -1...may someone help me plz....

    See:
    iOS: Unable to Update or Restore
    http://support.apple.com/kb/ht1808

  • While running jsp it is showing error

    Dear Folks,
    This is anand, i m new to Tomcat5.5, i have given my directory structure i think nothing wrong with this but it is showing some error.
    Webapps
    I
    anand
    I
    WEB-INF, helloworld.jsp
    I
    classes,web.xml
    If i try to run my simple helloworld jsp program it is showing error like this
    HTTP Status 500 -
    type Exception report
    message
    description The server encountered an internal error () that prevented it from fulfilling this request.
    exception
    javax.servlet.ServletException: Wrapper cannot find servlet class anand-jsp or a class it depends on
         org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:117)
         org.apache.catalina.connector.CoyoteAdapter.service(CoyoteAdapter.java:151)
         org.apache.coyote.http11.Http11Processor.process(Http11Processor.java:874)
         org.apache.coyote.http11.Http11BaseProtocol$Http11ConnectionHandler.processConnection(Http11BaseProtocol.java:665)
         org.apache.tomcat.util.net.PoolTcpEndpoint.processSocket(PoolTcpEndpoint.java:528)
         org.apache.tomcat.util.net.LeaderFollowerWorkerThread.runIt(LeaderFollowerWorkerThread.java:81)
         org.apache.tomcat.util.threads.ThreadPool$ControlRunnable.run(ThreadPool.java:689)
         java.lang.Thread.run(Unknown Source)
    root cause
    java.lang.ClassNotFoundException: anand-jsp
         org.apache.catalina.loader.WebappClassLoader.loadClass(WebappClassLoader.java:1362)
         org.apache.catalina.loader.WebappClassLoader.loadClass(WebappClassLoader.java:1208)
         org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:117)
         org.apache.catalina.connector.CoyoteAdapter.service(CoyoteAdapter.java:151)
         org.apache.coyote.http11.Http11Processor.process(Http11Processor.java:874)
         org.apache.coyote.http11.Http11BaseProtocol$Http11ConnectionHandler.processConnection(Http11BaseProtocol.java:665)
         org.apache.tomcat.util.net.PoolTcpEndpoint.processSocket(PoolTcpEndpoint.java:528)
         org.apache.tomcat.util.net.LeaderFollowerWorkerThread.runIt(LeaderFollowerWorkerThread.java:81)
         org.apache.tomcat.util.threads.ThreadPool$ControlRunnable.run(ThreadPool.java:689)
         java.lang.Thread.run(Unknown Source)
    note The full stack trace of the root cause is available in the Apache Tomcat/5.5.25 logs.

    hi,
    structure to alter like this
    Webapps
    I
    anand
    I
    WEB-INF, helloworld.jsp,web.xml
    I
    classes

  • HT201442 My phone wont restore. It is showing error 3194. How do I fix this?

    My battery went flat. I charged the phone (Iphone 5) up again and tried to open using my fingerprint. Got a message that I needed to enter the PIN because it was restarting. Entered the PIN - a number engraved on my mind for years - but it would not accept it. Got locked out.
    Followed Apple support's on-line help to the "T" , but now have a phone that won't restore.
    Phoned Apple. There's no-one there until tomorrow morning.
    Any ideas what to do, please? Other than bin every Apple product in the house (which I feel like doing after one problem after another for the last two weeks).
    Thanks
    Oh - and yes....Am i the only person who doesn't understand the Apple jargon? I just want a phone that works. It isn't my hobby. I have better things to do than mess about with this rubbish.

    Thanks again. The second time I tried to restore I got error 3004.
    My first problem was that the passcode was not accepted and I got locked out. I followed the support instructions (the same ones you have shared with me on your link). Everything was synced/backedup to i-tunes. (Took 40 minutes or so). When i tried to restore, I got the error 3194 message.
    I am at my wits end with this.....It is a phone supplied by my employer to replace an i-phone 4 that I had for two years without any problems. I got the new phone two weeks ago and followed the backup instructions then but the backup lost all of my contacts (business colleagues and clients numbers I had builkt up over the years) and I spent more than 16 hours the week before last on the phone to Apple trying, without success, to get them back. Hence my tetchiness about Apple.
    Today's problem feels like adding insult to injury and will undoubtedlky eat into a huge chunk of my limited time. Come back BlackBerry, all is forgiven!
    Thanks for trying to help. If you have any other ideas, I would be very grateful.

Maybe you are looking for

  • Consuming an ES Workplace WebService in Flex3

    here is the error message, when I insert these in the main thread it destroys the complete structure crazy [FaultEvent fault=SOAPFault (Client): SRT: Error when mapping Consumer and Provider structure <ns:SystemFault xmlns:ns="http://www.sap.com/weba

  • Only 90MB disk space after installing iLife '11 - how to move iLife?

    Hi, my installation of OS X is on a small SSD and I just barely had enough space to install iLife '11. I need more free disk space though so I need to move the largest iLife programs or maybe the whole thing. Obviously I wouldn't be posting here if t

  • Aperture 3 processes same 519 images on startup

    Every time I open Aperture 3.2.2 it says "processing" and I open the activity window and see that it is processing 519 images.  It gets through all 519 and then the processing stops...but after I quit Aperture, the next time I open it it goes back to

  • Status stuck in computer to computer

    My biege G3 runs 10.2.8 at 400 mhz . My airport status bar shows computer to compter - so I can't join my wireless network. I can't figure out how or what I did to change it. Much less how to put it back. The iBook shows "Staus: not available" but wo

  • FaceTime - iPhone 5

    Hey! I can not find the "facetime" on my device. The iphone is with me and has been for over a year since I bought it I have no facetime. iPhone 5, iOS 8.0.2