While restoring my iPod Touch second generation computer is turned off the screen goes black what do I do?

While restoring my iPod Touch second generation computer is turned off the screen goes black what do I do?

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar       

Similar Messages

  • I have an iPod touch and I can't turn off the portrait orientation lock. Can anyone help?

    I have an iPod touch and I can't turn off the portrait orientation lock. Can anyone help?

    What happenw when you try to turn it off?
    iOS: Screen does not rotate
    Not all app have a landscape mode.

  • Hi, I was using my iPod Touch and then all of a sudden, the screen went black. So I held the the on and menu button to reboot it and so it shut of and came back on and been on the loading screen for an hour. What can I do to fix it?

    Hi, I was using my iPod Touch and then all of a sudden, the screen went black. So I held the on/off button and menu button to reboot it. So it turned off then back on but it has been stuck on the loading page for an hour. What's wrong with it?

    - Let the battery fully drain. After charging for at least an hour try here:
    iOS: Not responding or does not turn on

  • My Mac won't start up and Im using DiscWarrior. When I restart the computer with "c" down, the screen goes black. Is this ok? Do I just wait it out?

    my Mac won't start up and Im using DiscWarrior. When I restart the computer with "c" down, the screen goes black. Is this ok? Do I just wait it out?

    Have you just tried repairing with Disk Utility?
    Repair the Hard Drive and Permissions - Lion/Mountain Lion
    Boot to the Recovery HD:
    Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
    Repair
    When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported then click on the Repair Permissions button. When the process is completed, then quit DU and return to the main menu. Select Restart from the Apple menu.

  • While restoring my iPod touch 4G (iOS 6.1.2), after the "extracting software" step, iTunes says that it cant connect to iPod server. Now my iPod is in recovery mode and I can't do anything. Please Help.

    I have Windows 7 installed with the LATEST iTunes software.
    I get this message while restoring and now my iPod is in restore mode. When I try to restore it fails after this message pops up. Please tell me a fix to it.
    1) I've checked my internet connection. All the sites work perfectly.
    2) I've tried it after disabling the windows firewall as well as my antivirus.
    3) I've also tried changes with the "hosts" file in Windows>System32>Driveres>etc.
    NO HELP WHATSOEVER.
    PLEASE HELP.

    Try:
    - Powering off and then back on your router.
    - Anything else here
    iTunes for Windows: iTunes cannot contact the iPhone, iPad, or iPod software update server
    - Change the DNS to either Google's or Open DNS servers
    Public DNS — Google Developers
    OpenDNS IP Addresses
    - Try on another computer/network
    - Wait if it is an Apple problem

  • I just got a new ipod touch 4th generation 64gb because i cracked the screen on my old one how can i get all my backed up stuff on to my new ipod?! help!!!!

    i just got a new ipod touch 64 gb 4th generation after my old one got cracked. my mum backed up all my stuff on my laptop pc but i tried to sync everything back on to my ipod but there are non of the music files there + the pictures wont download

    itunes content is not part of the backup as it should all be in itunes on your computer.
    What pics won't download?
    Please explain your issue.

  • My iPod touch is stuck on apple logo and the screen goes white sometimes.

    iPod touch is stuck on apple logo and sometimes the screen flashes white

    this is kinda late but the same thing is happening to mine right now!! im so upset, did u fix ytours?!

  • My computer will not start up. It powers up I get the gray screen with the apple and get the loading progress bar it loads to 25% and the screen goes black

    My computer will not start up. It powers up, I get the gray screen with the apple, then the loading progress bar starts loading to about 25% the the screen goes black. what can I try to get my computer up and running?

    Carolyn Samit wrote:
    iMac, Mac OS X (10.7.1)
    Use Command + R for Lion Recovery
    Try restarting, when you hear the startup tone hold down the Option key. Then choose the Recovery Partition.

  • IPod touch second generation.  Trying to sync to mac.  Have updated itunes and snow leopard.  When I plug it in, it is recognized in iphoto, not itunes.  ipod is freezing.  Have tried several times to set back to factory settings, but computer wont see it

    iPod touch second generation.  Trying to sync to mac.  Have updated itunes and snow leopard.  When I plug it in, it is recognized in iphoto, not itunes.  ipod is freezing.  Have tried several times to set back to factory settings, but computer wont see it

    Try here:
    iPhone, iPad, iPod touch: Device not recognized in iTunes for Mac OS X

  • IPod Touch Second Generation Can't, no.. Wont, Charge (the poor thing is trying)

    Hello friendly Apple Experts,
    I recently had an unfortunate incident when my iPod touch third generation went for a swim. While we waited for it to recover I dug my old iPod touch second generation out of storage (when it was put it into storage it had been completely restored)
    Initially it took several hours to even begin charging. It would go from Charging Logo --> Apple Logo (loading screen) --> Black Screen, and start over again. Eventually it was juiced up enough to get to the home screen. After this it reverted to it's normal three hours, or so, of charge time. At first it was running like it did when it was first bought, the battery life was still exceptional. So I synced it to iTunes and loaded it right up.
    However, a few days later we dug the other iPod out of the rice and it seemed to be working just fine. So I began to use both, one for travel, the other for at home. Unfortunately the second generation one was put aside for about four weeks and the battery completely drained. Since I had initially rebooted the iPod it had not been completely drained again. At this point, it has been plugged in for several days and goes in a continuous loop of: Charge Logo --> Apple Logo --> Black Screen and then back again. And on yet another sad note, the battery life for the third generation one has been affected very negatively by its little dip.
    To be honest I never wanted the third generation one to begin with, the only reason I bought it was because the second generation’s software became completely obsolete.
    Anyway, my questions are...
    What has happened to my beloved Second Generation iPod touch?
    Is there any way to fix it?
    and...
    Is there anything I can do to prolong the life of the Third Generation device?
    Thanks so much,
    A friendly Apple consumer.

    Not Charge
    - See:      
    iPod touch: Hardware troubleshooting
    - Try another cable. Some 5G iPods were shipped with Lightning cable that were either initially defective or failed after short use.
    - Try another charging source
    - Inspect the dock connector on the iPod for bent or missing contacts, foreign material, corroded contacts, broken, missing or cracked plastic.
    - Make an appointment at the Genius Bar of an Apple store.
    Apple Retail Store - Genius Bar                          
    Apple will exchange your iPod for a refurbished one with a new battery for $79. They do not fix yours.
    Apple - iPod Repair price                       
    A third-party place like the following will replace your battery for less. Google for more.
    iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens
    Replace the battery yourself if you are up to it. Yo can purchase a replaement battery for about $10
      iPod Touch Repair – iFixit

  • HT1212 Restoring an iPod touch 5th generation to factory defaults

    How do I restore an iPod touch 5th gen?  I went through the procedures and it is still in disabled status.  I do not have a backup on iTunes.

    Locked Out, Forgot Lock or Restrictions Passcode, or Need to Restore Your Device: Several Alternative Solutions
    1. iOS- Forgotten passcode or device disabled after entering wrong passcode
    2. iPhone, iPad, iPod touch: Wrong passcode results in red disabled screen
    3. Restoring iPod touch after forgotten passcode
    4. What to Do If You've Forgotten Your iPhone's Passcode
    5. iOS- Understanding passcodes
    6. iTunes 10 for Mac- Update and restore software on iPod, iPhone, or iPad
    Forgotten Restrictions Passcode Help
    You will need to restore your device as New to remove a Restrictions passcode. Go through the normal process to restore your device, but when you see the options to restore as New or from a backup, be sure to choose New.
    Also, see iTunes- Restoring iOS software.
    If the above isn't working for you:
    Placing your device into recovery (DFU-Device Firmware Upgrade) mode:
    Follow these steps to place your iOS device into recovery mode. If your iOS device is already in recovery mode, you can proceed immediately to step 6.
       1. Disconnect the USB cable from the iPhone, iPad, or iPod touch, but leave the
           other end of the cable connected to your computer's USB port.
       2. Turn off the device: Press and hold the Sleep/Wake button for a few seconds
           until the red slider appears, then slide the slider. Wait for the device to turn off.
                  * If you cannot turn off the device using the slider, press and hold the
                    Sleep/Wake and Home buttons at the same time. When the device turns off,
                    release the Sleep/Wake and Home buttons.
      3. While pressing and holding the Home button, reconnect the USB cable to the
           device. The device should turn on. Note: If you see the battery charge warning,
           let the device charge for at least ten minutes to ensure that the battery has some
           charge, and then start with step 2 again.
      4. Continue holding the Home button until you see the "Connect to iTunes" screen.
           When this screen appears you can release the Home button:
      5. If necessary, open iTunes. You should see the following "recovery mode" alert:
      6. Use iTunes to restore the device.
    If you don't see the "Connect to iTunes" screen, try these steps again. If you see the "Connect to iTunes" screen but the device does not appear in iTunes, see this article and its related links.
    Additional Information:
    If you have a problem getting into recovery mode then try: RecBoot: Easy Way to Put iPhone into Recovery Mode.
    Note: When using recovery mode, you can only restore the device. All user content on the device will be erased, but if you had previously synced with iTunes on this computer, you can restore from a previous backup. See this article for more information.

  • Please help block my ipod touch second generation and forget the code, try putting the code so many times that now says connect to itunes, I connect but will not let me do anything that tells me this should unlock with key and I should do for Please help!

    please helpme i block my ipod touch second generation and forget the code, try putting the code so many times that now says connect to itunes, I connect but will not let me do anything that tells me this  should unlock with key and I should do for Please help!. thanks

    Place the iPOd in recovery mode and then restore. For recovery mode:
    iPhone and iPod touch: Unable to update or restore

  • IPod touch second generation 4.2

    I have the old and outdated iPod touch second generation with the 4.2 on it and I currently only have the apps that come with it when it's at it's factory setting, and I would like to know how I can get apps that are supported for this operating system without going through the app store and clicking on every app until I find one that will work. Now I do know that's it's considered old but surely there is some way to get apps on this device. I mainly got this to put music, videos, and pictures on and I can do that through iTunes. However, I would like to maybe put Facebook, craigslist, free texting, and possibly a few game apps on my iPod simply because I hate bouncing back and fourth on my phone from text messaging to my Facebook or games or whatever else I may be doing.. Thanks for reading and hopefully I'll get some responses that will be able to help me out

    No dice. There are not that many god apps that currently available for the 2G iPod. There is also no way to search only for compatible apps.
    FB and a lot of other good apps require iOS 4.3 or greater.
    Your only way is if you have the version that was compatible on your computer such as in the recycle bin/trash or in a computer file backup. In that case delete the current version that is in your iTunes App library and replace it with the older version. Then sync.
    Also see:
    Recover Older Versions of iPhone Apps After Updating — Apple News, Tips and Reviews

  • HT1414 I am trying to restore my Ipod touch 5 generation but I am receiving an error message that says  your Ipod can not be restored you need your password I don't know my password so I don't know what to do. I have started the procedures 3 times but no

    am trying to restore my Ipod touch 5 generation but I am receiving an error message that says  your Ipod can not be restored you need your password I don't know my password so I don't know what to do. I have started the procedures 3 times but no luck till now

    If it is asking for the screen-lock passcode then:
    Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
    iOS: Wrong passcode results in red disabled screen                         
    If recovery mode does not work try DFU mode.                        
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings        
    For how to restore:
    iTunes: Restoring iOS software
    To restore from backup see:
    iOS: Back up and restore your iOS device with iCloud or iTunes
    If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
    You can redownload most iTunes purchases by:
    Downloading past purchases from the App Store, iBookstore, and iTunes Store        
    If problem what happens or does not happen and when in the instructions? When you successfully get the iPod in recovery mode and connect to computer iTunes should say it found an iPod in recovery mode.
    Otherwise follow varjak paw recommendation

  • Ipod touch second generation, ios 5

    I have an ipod touch second generation, I need something that will help me download apps! It says I need ios 5 but ios 5 doesn't work on the second generation. Someone help!

    Your only way is if you have the version that was compatible on your computer such as in the recycle bin/trash or in a computer file backup. In that case delete the current version that is in your iTunes App library and replace it with the older version. Then sync.
    You can only download the current version from the Apple app store.

Maybe you are looking for

  • Dual Monitor and Full screen playback in Color 1.0

    So, I was wondering if somebody could help me out. I have 2 screens, one is a 23" ACD other is a 23" dell. I am going to be color correcting with my Matrox MXO setup on the 23"ACD. Whenever I do full screen playback the waveform monitor and vectrosco

  • URGENT SUGGESTIONS- j2ee WEB FRAMEWORK

    Hi All, As a part of our part time project me and my friends are exploring on development of a j2ee web framework. For this we are exploring the behaviours of some famous frameworks such as STRUTS. We are looking at the normal Controller model, The a

  • Physcial Inventory by mass update

    Hi We have created many Physical Inventory Document in MI31 Exported to Excel To enter the count details we want to use MI34, but system is asking for logical file. Do we need to create any logical files for these? How to update by mass the count det

  • Time/Date Stamp your video file

    Hi there, I have a number of video files and I need to burn in time (h:m:s) and date onto them without metadata using offsets. Is this at all possible with premiere? Some files are 30 hrs long - monitoring outside conditions and I need the date to sw

  • HT4818 how to use itunes

    how do I get an audion book out of my audible library into itunes?