While running open script software i am getting issue of script exception occured . an unexpected exception occured in the script.script section unspecified.

while running open script software i am getting issue of script exception occured . an unexpected exception occured in the script.script section unspecified.
i am using software version 12.5.0.1

Similar Messages

While creating a device category i'm getting an error "enter a valid division via eg01,how can the error be overcom?

While creating a device category i'm getting an error "enter a valid division via eg01,how can the error be overcome?

Neha,
you can do in two ways.
1. Enter a valid Division which you configured in the system.
2. Remove the Division as required field. However I suggest it should have a valid division. Why can not you check with your Functional owner?
Linganna Katigiri

While running Auto payment program through F110 getting error

Dear Experts,
while running Auto payment through F110 we are getting below error
"F0417 warning: check whether a duplicate payment medium has been created".
I dont have any problem for payment summary and payment advice, issue only for payment voucher.
Would appreciate if you could provide some inputs on this.
Thanks and Regards,
N.C.Reddy

Hi,
I have done some changes configuration in Paying company codes and payment method in company code, the issue has been resolved.
Thanks and Regards,
N.C.Reddy

Why do I get a Track out of memory error while running open loop frequency response?

MatrixX Build 61mx1411: I get a "Track out of memory" error when I run the Open Loop Frequency Response from the MatrixX pull down tools. What can I do to prevent this? We are running on an HP B1000 with 768 MB of RAM under HP-UX 10.2.

In the old days of Mx say Version 5 and prior the user actually selected the amount of memory that would be allocated. Depending on the size of the model etc. you would have to allocate memory. In version 6.0 and going forward there is no need for the user to manually allocate the memory.
Build {rstack=50000,istack=200000,sstack=50000,cstack=500 000}
If this is a command in a script file that you are running and the error is resulting from that then I would try commenting out everything after the letter d in the word build and then starting it back up.
i.e. only use Build
I don't believe that there is a way to manually allocate the initial SystemBuild Stack size.
I believe initially the stack size is set to 10010.
However, one way
you can manually set the initial SystemBuild stack size,is to create a large StateSpace as soon as you start up SystemBuild. This will prevent piece-meal reallocs while using SystemBuild.
You can created a new SuperBlock in SystemBuild and then drop down a StateSpace Block with 199 inputs and 199 Outputs and 1 State and entered ones(200,200)as the StateSpace Matrix without any problems. This would resize this internal stack to at least 40000.
You really should not have to do this but if that helps then you might think about doing this in your startup.ms file you could use SBA or load the file then you could delete the superblock and begin working.
"Bob" gave me this little tid bit.
Please let me know if any of this is of use.
Garrett
Garrett Thurston
[email protected]
Phone: 781.993.5540

Access denied error while running opening remote power-shell session from one azure machine to another

We are trying to open a remote power-shell session from one azure machine to another azure machine and that is failing with the following error. Any ideas?
Observations: -
If the worker role is running under network service or local system, then it fails.
We emulated the same behavior from a stand-alone exe and that also failed when the exe was run under network service or local system.
If we run the same stand-alone exe from a user account, then it works.
Unhandled Exception: System.Management.Automation.Remoting.PSRemotingTransportException: Connecting to remote server sampleapprm.cloudapp.net failed with the following error message : Access is denied. For more information, see the about_Remote_Troubleshooting
Help topic.
   at System.Management.Automation.Runspaces.AsyncResult.EndInvoke()
   at System.Management.Automation.Runspaces.Internal.RunspacePoolInternal.EndOp
en(IAsyncResult asyncResult)
   at System.Management.Automation.Runspaces.Internal.RemoteRunspacePoolInternal
.Open()
   at System.Management.Automation.RemoteRunspace.Open()
   at ConsoleApplication2.Program.Main(String[] args)

Hi,
This error only show access is denied, and it is hard for me to deal with this issue, may be Windows Powershell forum or Windows Azure VM are good forums for you, could you give more details information to us for a better help if this issue
was related with windows Azure.
Best Regards
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

While running my macbook air it suddently gets the blue screen and i have to shut it down

can i do to fix it ?

power off then:
perform SMC reset
SMC reset
Shut down the computer.
Plug in the MagSafe power adapter to a power source, connecting it to the Mac if its not already connected.
On the built-in keyboard, press the (left side) Shift-Control-Option keys and the power button at the same time.
Release all the keys and the power button at the same time.
Press the power button to turn on the computer.
report back
What initiated this? anything?
If same contact Apple for free in shop diagnostic and possible repair.

While starting up portal server gateway I get an error "cannot read from rp.keystore, unable to read the PKCS key".

The OS is solaris 8 and portal server 3. The first installation went through properly and we had installed many other applications also along with portal server. Then we had to ship the machine to some other city and restarted with same IP address, host address and domain, and also made a LAN without hooking onto the main network. From then on we are facing this problem. Even tried reinstallation a couple of times, after uninstall and deleting/renaming rp.keystore. The main problem looks like gateway not being able to read rp.keystore. The password required for reading it is the admin password which works fine the admin console.By invoking certstore also I am getting the same error.

There is a couple of things I can think of here, one is the permission, you need to install the gateway as root , make sure the gateway and relevant files are installed as root and have the right access permissions.
There should be file called .rppass and this contains the password and this should match the same password that you have used for the admin console.
I would recommend you to use 3.0sp3a instead of 3.0 for better performance and scalability.
HTH ..

Since I've loaded Lightroom CC the programs crashes whenever I try to open the Slideshow module. I get a message that says "dynamiclinkmanager quit unexpectedly." In Preferences the "Use Graphics Processor" box is checked. The graphics card is NVIDIA GeFo

Help!

Here is what was cut off in title bar. The graphics card is NVIDIA GeForce GTX 780M OpenGL Engine on a 2014 iMac running 10.10.3. How do I correct this?

Date parameter interchanges while running SSRS reports in CRM 2013 online

Hi,
We have a 2 date parameters in a SSRS Report, While running this report a user is getting issue with this date parameter, date changes to month and month changes to date in the first parameter(in screen shot it is 01-dec entered but displays 12-jan) and
second seems to work fine but here time is also shown.
As a note: I am not getting the error when I run it.
Any one has got the same issue, Any suggestion/solution?
Regards,
Rekha.J

If this is happening to only one or a few users then I suspect some issue with the user's machine configuration. Have the user log in and try it from your machine and see if he or she gets the same experience. Ensure you have completely cleared
the user's cache and also try with a different browser like Chrome.
Regards, Donna

Getting the error while running request

Hi,
While running "Budgetary control optimizer" we are getting the following error.
APP-FND-00806: The default value XXXXX is invalid for the P_LEDGER_ID segment. Your default value will be ignored. Please inform your system administrator that:
Add the value XXXXXX to the value set for segment P_LEDGER_ID, or choose another default value in the Key Flexfield Segments form or Descriptive Flexfield Segments form. Use the Edit Concurrent Program or Define Report Set form for Standard Report Submission report defaults.
Value XXXXXX for the flexfield segment Ledger Name does not exist in the value set GL_SRS_LEDGER_PRIMANDSECD.
How do i fix this error???
Thanks

Hi;
Please check R12 Accounting Errors Encountered FAQs [ID 601306.1] and search as APP-FND-00806:
Regard
Helios

I am getting dump error while running one report in one select query

Hi,
While running a report program, I am getting a dump error in one select query. So could you please correct the select query so that I can't face the dump error.
SELECT vbeln parvw kunnr INTO CORRESPONDING FIELDS OF TABLE l_t_vbpa
FROM vbpa
FOR ALL ENTRIES IN l_t_backorder_item
WHERE vbeln = l_t_backorder_item-vbeln AND
( ( parvw = c_we AND kunnr IN rng_shipto ) OR ( parvw = c_ag AND
kunnr IN rng_soldto ) ) .
<removed by moderator>
Best Regards,
BDP
Edited by: Thomas Zloch on Apr 30, 2010 12:31 PM

Hi Bansidhar,
It would be helpful if you could tell what type of dump it is.
If it is a timeout you should check whether l_t_backorder_item is empty - in this case ALL document numbers are selected. f you get the timeout with a populated table consider converting the l_t_backorder_item table into one ore more ranges tables - the select with ranges tables is way quicker than 'for all entries'. But take care the ranges table has not to many entries - the SAP SQL converter puts this into one huge SQL statement and this might become too big to be handled by the database (depends on the actual underlying database).
I would also consider splitting the SELECT into two (2nd one with 'appending into table') to make the code easier to understand It also helps the database system determining a strategy for the select.
Regards,
Gerd Rother

Get Managed bean name while running tests.

hi,
while running web application,i can able get managed name.
but how to get managed bean name while running unit tests.
thanks
siva

public String getManagedBeanName() {
    String managedBeanName = null;
    HttpServletRequest request =
        (HttpServletRequest) FacesContext
            .getCurrentInstance()
                .getExternalContext()
                    .getRequest();
    // lookup bean in request scope
    Enumeration requestAttributeNames = request.getAttributeNames();
    while (requestAttributeNames.hasMoreElements()) {
        String requestAttribute = (String) requestAttributeNames.nextElement();
        Object object = request.getAttribute(requestAttribute);
        if (object instanceof MyBean) {
            managedBeanName = requestAttribute;
            break;
    if (managedBeanName == null) {
        // lookup bean in session scope
        Enumeration sessionAttributeNames = request.getSession().getAttributeNames();
        while (sessionAttributeNames.hasMoreElements()) {
            String sessionAttribute = (String) sessionAttributeNames.nextElement();
            Object object = request.getSession().getAttribute(sessionAttribute);
            if (object instanceof MyBean) {
                managedBeanName = sessionAttribute;
                break;
    return managedBeanName;
}Sorry, don't know other ways.

Error While Running Oracle Reports Server(9iAS) on Red Hat Linux6.2

I have installed Oracle9iAS on Redhat Linux6.2 I have successfully started the Reports Server. While running any rdf files I m getting the error message "rwrun60: error in loading shared libraries: libXm.so.2: cannot open shared object file: No such file or directory". I don't have this libXm.so.2 file in my system. How to get this file?
Pls help me in this regard as soon as possible.
Thanks in advance.
Manoj

You probably need to install Open Motif (2.1.30), which you can download from:
http://www.opengroup.org/openmotif
Be sure to include /usr/X11R6/lib in your LD_LIBRARY_PATH and PATH.
You may also need to relink:
make -f ins_reports60.mk install
after you install Open Motif.
Hope this helps.
Scott

Error while Running backup

Hi
I have downloaded the Oracle Secure Backup Cloud Software and have installed the software for secure backup but while running Backup database command i am getting the below error. Any clue?
RMAN> backup database;
Starting backup at 30-APR-10
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of backup command at 04/30/2010 02:58:34
ORA-19554: error allocating device, device type: SBT_TAPE, device name:
ORA-27023: skgfqsbi: media manager protocol error
ORA-19511: Error received from media manager layer, error text:
KBHS-00715: HTTP error occurred 'internal-error'
RMAN> show all
2> ;
RMAN configuration parameters are:
CONFIGURE RETENTION POLICY TO REDUNDANCY 1; # default
CONFIGURE BACKUP OPTIMIZATION OFF; # default
CONFIGURE DEFAULT DEVICE TYPE TO 'SBT_TAPE';
CONFIGURE CONTROLFILE AUTOBACKUP OFF; # default
CONFIGURE CONTROLFILE AUTOBACKUP FORMAT FOR DEVICE TYPE SBT_TAPE TO '%F'; # default
CONFIGURE CONTROLFILE AUTOBACKUP FORMAT FOR DEVICE TYPE DISK TO '%F'; # default
CONFIGURE DEVICE TYPE 'SBT_TAPE' BACKUP TYPE TO COMPRESSED BACKUPSET PARALLELISM 4;
CONFIGURE DEVICE TYPE DISK PARALLELISM 4 BACKUP TYPE TO BACKUPSET;
CONFIGURE DATAFILE BACKUP COPIES FOR DEVICE TYPE SBT_TAPE TO 1; # default
CONFIGURE DATAFILE BACKUP COPIES FOR DEVICE TYPE DISK TO 1; # default
CONFIGURE ARCHIVELOG BACKUP COPIES FOR DEVICE TYPE SBT_TAPE TO 1; # default
CONFIGURE ARCHIVELOG BACKUP COPIES FOR DEVICE TYPE DISK TO 1; # default
CONFIGURE CHANNEL DEVICE TYPE 'SBT_TAPE' PARMS 'SBT_LIBRARY=/home/oracle/osbws/libosbws11.so ENV=(OSB_WS_PFILE=/home/oracle/osbws/osbws.cfg)';
CONFIGURE MAXSETSIZE TO UNLIMITED; # default
CONFIGURE ENCRYPTION FOR DATABASE ON;
CONFIGURE ENCRYPTION ALGORITHM 'AES128'; # default
CONFIGURE ARCHIVELOG DELETION POLICY TO NONE; # default
CONFIGURE SNAPSHOT CONTROLFILE NAME TO '/mnt/database/dbtest/db/tech_st/10.2.0/dbs/snapcf_TEST.f'; # default
Thanks
Edited by: user6803831 on Apr 30, 2010 12:42 AM

Hi,
oraInst.loc (/etc/oraInst.loc) points to directory without permissions: /u01/app/oracle/oraInventoryPlease make sure that applmgr user has read/write/execute permission on the oraInventory directory.
Please look in to the latest OUI log file located in the central inventory /clonehot/apps/inst/apps/PROD_apps/admin/oraInventory/logs/cloneActions_<timestamp> for more detailsAny details about the error in this log file?
Thanks,
Hussein

I have a touchsmart running windows 7 and i cannot get my screen saver to work

i have a touchsmart running windows 7 and i cannot get my screen saver to work

Hello. You need to change the energy use setting that computer uses max it out. Then it will work just fine. My is touchsmart 600-1050. The computer was preset to use minimum amount of electricity when in idle. I changed all the setting to high. Now every thing runs just like a Windows XP version computer. Thats how I got my screen savors to work. I also upgraded my Windows 7 to Windows 7 Ultimate now I am able to run a lot more XP software. Test your pond screen saver make sure that working with windows open. That will tell you if it is a software issue if it doesn't work. That is the case then restore it from your D: drive.

While running open script software i am getting issue of script exception occured . an unexpected exception occured in the script.script section unspecified.

Similar Messages

Maybe you are looking for