While running payroll i am getting an error saying no currency in tabl

hai frined,
iam facing a problem while running payroll
no currency in t100p table
any help plz
kumari

hai..
try copying a sample entry already existing for the respective country and re name it...
U will not get the ERROR

Similar Messages

While running payroll I am getting this error .pls guide me to resolve

/001 Valuation basis 1
Division by zero not performed
Calculation rule X0133****5 RTE =TSD IVP DIVID ARR ZERO =AADD
Thanks

Hi,
As per error message the issue is because of zero value of SDIVP field.
SDIVP : Total working time measured in working hours. It shows shows how many hours the employee works in one payroll period.
The value SDIVP is the employee's basic pay divisor (field DIVGV, infotype P0008). That is Working Hours per Payroll Period field of IT0008 is not maintained for the employee. The default value is determined by the Planned Working Time infotype (0007).
But somehow it is missed in your case.
Check and maintain.

While opening SXMB_IFR i am getting a error Java.lang.noclassFounderror

U have installed SAP XI in my laptop while opening
SXMB_IFR i am getting a error Java.lang.noclassFounderror
so i not able to go further please help me
thanking you
sridhar

Hi,
There are number of ways to do that :
1. Try this url
http://<host-name or IP address of XI server>:<java Port number)>/rep/start/index.jsp
If this is successful that means your J2EE server and services are fucntioning fine. The problem could then be on the ABAP stack.
2. Can you start visual admin tool and check that all the services are running. You might have to manually start those which have not automatically started. Check the connectivity with all system & server (inc n/w) & Register the hostserver entry in your sys32/ host file
e.g 10.2.4.56 <server name>
3. Have you download java sdk 1.4 on you laptop?
http://java.sun.com/j2se/1.4.2/download.html
also have a look at this sap note: 801868
(make sure not to install the 1.5 version of JWS. XI does not work properly with the 1.5 version)
4. Lastly, u might have some problem with ur JRE installation. In that case i would sugesst you to re-install JRE/ Java WebStart.
This blog may help you to analyze the errors-
/people/krishna.moorthyp/blog/2006/07/23/http-errors-in-xi
Refer
XI Installation problem
XI Installation problem
503 error in SXMB_IFR
XI Initial screen problem
XI Initial screen problem
thanks
Swarup
Edited by: Swarup Sawant on Feb 19, 2008 8:42 AM

My old iPod Photo sync'd with 10.6 but won't with my new iMac running 10.7, I get an error message, am I done?

My old iPod Photo sync'd with 10.6 but won't with my new iMac running 10.7, I get an error message and a message that it could not sync, am I done?

What's the error message say, exactly? Does the error occur when you sync, or when you just connect it? Does the iPod appear in the iTunes sidebar (under DEVICES), or does this error occur before that can happen?
I have an old 4th Gen (color screen) iPod, which should be the same as an "iPod Photo." It's been sitting idle for a while, but I just connected it to my iMac running Mac OS X 10.7 and iTunes 10.6.1. I think it's the first time I tried since upgrading to Lion. It connected and synced fine using USB.

I'm having problems with 8.1 and Continuity / Handoff. It will work fine for web pages, etc. but in email when I try to do it between by iPhone 5s running 8.1 and my Macbook Pro running Yosemite I consistently get an error.

I'm having problems with 8.1 and Continuity / Handoff. It will work fine for web pages, etc. but in email when I try to do it between by iPhone 5s running 8.1 and my Macbook Pro running Yosemite I consistently get an error. "Failed to Continue Activity" Cocoa Error 4609. Handoff is working for phone calls and text messages. By email just crashes each time. It was also doing it under 8.0.2. My iPhone and iPad handle this fine. It's only the MacBook to the iPhone that fails, and only on email.

Handoff Continuity Troubleshooting

While making a payment am getting the error.

Hi All,
While making a payment am getting the error.
Error Details:
APP-SQLAP-10000:ORA-20001:APP-FND-00466
FND_CONCURRENT.GET_REQUEST_STATUS cannot find your concurrent request 943570.
This is my payment batch details:
BatchName PaymentDate Status
EMPLOYEE210809 21-08-09 Formatted
I went to following navigation
PayablesManager-->Payments-->PaymentBatches-->i query for the particular invoice batch(am getting corresponding invoice)-->Actions..1-->ConfirmPAymentBatch(i enabled the check box) click on the ok button.
Can you pls suggest me how i can do this one.
Thanks in advance.
Regards,
Leelakrishna.G

Pl see if MOS Doc 1054330.6 (APXPAWKB - GETTING FRM-40735; ORA-04068; ORA-04067; ORA-06508; ON PAYMENTS) can help
HTH
Srini

I own an iMac 2011. I am unable to reinstall and launch premiere pro cc. We I attempt to run the program I get a error message saying that the adobe application manager is missing or need to be updated. I reinstalled the manager but I am still unable to l

I own an iMac 2011. I am unable to reinstall and launch premiere pro cc. We I attempt to run the program I get a error message saying that the adobe application manager is missing or need to be updated. I reinstalled the manager but I am still unable to launch any of my programs from adobe. I tried to do a trail with a program and I am still getting the same message.

Davinci thank you for the update.
Please utilize any available uninstallers that are located in the Applications/Utilities/Adobe Installers folder. Once all of the available uninstallers have been run you will then want to rerun the CC Cleaner Tool. You can find directions on the use of the CC Cleaner Tool and a download link at Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6 - http://helpx.adobe.com/creative-suite/kb/cs5-cleaner-tool-installation-problems.html. After the CC Cleaner Tool is run then please reinstall the Creative Cloud Desktop application from Creative Cloud Help | Creative Cloud for desktop.
The CC Cleaner Tool is designed to be used after running the uninstallers. Without running the uninstallers first then a complete removal may not be possible.

While upgrading Adobe Creative Suite CS4 ME into Adobe Creative Suite CS5.5 Design Premium, I get an error saying This serial number is not of a qualifying product, please try another. I used to be able to get a code from customer service but I can't get

While upgrading Adobe Creative Suite CS4 ME into Adobe Creative Suite CS5.5 Design Premium, I get an error saying This serial number is not of a qualifying product, please try another. I used to be able to get a code from customer service but I can't get to the chat. Please advise!!!!

MoeGhazal I reviewed your account and it looks like you have have upgraded from a CS4 volume license for Design Premium to a retail upgrade of Design Premium 5.5.
I also show that you made two purchases of CS5.5 Design Premium but the second purchase was canceled. Please make sure you are utilizing the serial number which ends in 7886.
If you are using the correct serial number then it is likely the installer will not recognize your volume license CS4 serial number as being valid for an upgrade. If you can contact our support team then you can be walked through an unlocking procedure to allow you to proceed with the installation. You can contact our support team directly at Contact Customer Care. You may want to try installing a web browser you have not previously utilized. It is likely a toolbar or some other software application is affecting your ability to access chat support successfully.
If you are still unable to reach our support team then please verify the information under your account is accurate. If you can please then update this discussion after confirming this then I can request a member of our support team contact you directly.
Again I would recommend reaching out directly if possible as it will be the most efficient method of resolving your current error.

I cannot run itunes, I keep getting this error message" Quick Time failed to initialized (error02096) Quick time is required to run please unistall itunes then install itunes again, I have done this three time and I keep getting the same error message.

On my PC, I cannot run itunes, I keep getting this error message" Quick Time failed to initialized (error02096) Quick time is required to run please unistall itunes then install itunes again, I have done this three times and I keep getting the same error message. I have had itunes for years, but up until 2 months ago the quick time will not initialize to run it.

Try using the Windows Installer Cleanup Utility and delete the iTunes installer. Then try installing iTunes again
http://majorgeeks.com/Windows_Installer_CleanUp_Utility_d4459.html

While running how do I get my podcast to play one song and move to the next and not skip to the next after a few seconds into the song?

I recently started running and downloaded the Couch to 5K webcasts, while running how do I get my podcast to play one song in it's entirety and move to the next and not skip to the next after a few seconds into the song? I beleive it's the motion of the running that is causing it, is there a setting I need to change?

Hello nowrunning,
Is the "Shake to Shuffle" option turned on in your iPod's settings? To check, head to Settings -> Music -> Shake to Shuffle and make sure it is set to Off.
B-rock

I have Os Lion on my mac book pro, im not a fan of this because i cant run many games, i have the disk for snow leopard my machine came with but i get a error saying "unable to unmount disc" when i try erase my hard drive i just want OS SL back any help?

I have Os Lion on my mac book pro, im not a fan of this because i cant run many games, i have the disk for snow leopard my machine came with but i get a error saying "unable to unmount disc" when i try erase my hard drive i just want OS SL back any help?
many thanks Carl.

You must boot from another drive in order to erase the system drive.
Try starting up with Snow Leopard DVD inserted and C depress. That should get you booted from the DVD. Then start Disk Utitlity from DVD and erase the disk then you should be able to install Snow Leopard.
Remember that everything will be removed from the disk when you erase it and install Snow Leopard so backup first.
Allan

Hi can anyone help i bought modern combat 5 blackout and everytime i run it i get an error saying please check your internet connection and try again ,it will not connect has anyone got a solution pls

hi can anyone help i bought modern combat 5 blackout and everytime i run it i get an error saying please check your internet connection and try again ,it will not connect has anyone got a solution pls

use it on a diffrent network if u dont have a mc donalds or sone other place to test it most librarys have wifi just to make sure its not that if its not the wifi falut and the app has been re installed may be a bug since this game is still pretty new

I downloaded itunes but when i try to install i get an error saying "There is a problem with this windows installer package. a programe required for this install could not be run" can anyone help?

I downloaded itunes but when i try to install i get an error saying "There is a problem with the windows install. A programe needed to install could not be open"
can anyone help?

Ok, Below is what worked for me somewhat.
Okay ... try downloading and saving a copy of the iTunesSetup.exe to your PC from the Apple website:
http://www.apple.com/itunes/download/
Now download a trial version of WinRAR:
http://www.rarlab.com/download.php
Open the iTunesSetup.exe with WinRAR, and try to run the standalone install of Apple Application Support from the AppleApplicationSupport.msi you find in there.
It works now BUT there are still problems. It is not allowing or recognizing my Cd/DVD player and i CANT burn. Looking still for this fix.

I'm running OS 10.4 and purchased Mac Box Set with Snow Leopard. When I run the Snow Leo install it errors saying I need OS 10.5 to run the install. How do I get around this? I've read that it's possible to go direcectly from 10.4 to 10.6.

I'm running OS 10.4 and purchased Mac Box Set with Snow Leopard. When I run the Snow Leo install it errors saying I need OS 10.5 to run the install. How do I get around this? I've read that it's possible to go direcectly from 10.4 to 10.6.

To buy a hard drive try Newegg.com http://www.newegg.com/Store/SubCategory.aspx?SubCategory=380&name=Laptop-Hard-Dr ives or OWC http://eshop.macsales.com/shop/hard-drives/2.5-Notebook/
Here's a cheap SATA external hard drive case on eBay http://cgi.ebay.com/USB-2-5-SATA-HDD-HARD-DRIVE-EXTERNAL-ENCLOSURE-CASE-BOX-/120 636286623?pt=PCC_Drives_Storage_Internal&hash=item1c167ba69f
Here's instructions on replacing the hard drive http://creativemac.digitalmedianet.com/articles/viewarticle.jsp?id=45088

I downloaded the recent Pages update but now I can not open some documents done last year. I get an error saying that I need to download a newer version of Pages. I am running version 4.3

I downloaded the recent Pages update but now I can not open some documents done in the past year. I get an error saying that I need to download a newer version of Pages. I am running version 4.3. Do I have to purchase an update of Pages?

You are not on Mountain Lion anymore, right? You are on Mavericks and have downloaded Pages 5 and then created docuemnts in it which can't be opened in Pages 09.
No, you don't have to buy a newer Pages but you have to be particular about which version you use.

While running payroll i am getting an error saying no currency in tabl

Similar Messages

Maybe you are looking for