While running Windows 7 with Bootcamp I got a blue screen talking about memmoy. What happens with that trouble?

I have installed win7 on mountain lion 10.8.5 and at the begining it seemed to work good but now in the last 2 times I have stayed using Win7 suddenly i got a blue screen I as I could read, it is about memory failure.
Does anybody can help me with that?
Or maybe someone had the same problem I have fixed it all, please share your tips or trick.
Thank you all the community.

Did you download and install the Windows Support Software?

Similar Messages

  • How can I turn on the integrated bluetooth radio while running windows 7 through bootcamp?

    I am running a partitioned windows 7 64-bit on my macbook pro. The integrated bluetooth radio is turned on while using the Mac OS, but not while running windows 7. How can I fix this?

    spainchaud wrote:
    I would also like to be able to check if HT is working under Mac OS.
    Another way to do that is to turn on Verbose Mode and watch the processor IDs that are enabled. And/or open the kernel.log in Console and find the beginning of today's boot. You should see a list of "AppleACPICPU: ProcessorId=# LocalApicId=# Enabled" counting up to the number of processors your Mac could have. For example, I've got one CPU but the Mac could hold two. Each CPU has six processors and each processor has two threads, so the kernel.log shows ProcessorId 0 to 11 having LocalApicId's enabled and 12 to 23 having LocalApicId's disabled (because the second CPU isn't installed).

  • I have a pc running windows 7.  I got an Airport Extreme 802.11n Wi-Fi and the printer is now plugged into the Airport.  The wireless router works fine but the printer shows as offline in control panel and in word. The printer is a HP LaserJet CP1525nw.

    I have a pc running windows 7.  I got an Airport Extreme 802.11n Wi-Fi and the printer is now plugged into the Airport.  The Airport works fine but the printer shows as offline in control panel and in word. The printer is a HP LaserJet CP1525nw.

    +For now I have it set to Share Public IP address - Is this correct for my Network Setup with The Airport Extreme being the only router being used ?+
    This would be the correct setting if the AirPort Extreme is connected to a simple modem (one ethernet port).
    *Settings I have Enabled*
    5 GHz name indicates that you have elected to use the option to assign a separate name to the 5 GHz network. This will allow you to "tell" compatible computers to connect to that network, rather than the slower 2.4 GHz network
    Use Wide Channels is recommended for 5 GHz operation.
    Interference Robustness often does more harm than good and should not be used unless you know you are in a area with a lot of wireless networks and you feel that your network is experiencing interference issues from a nearby network.

  • HT5639 After installing the windows 7 64 bit, it will restart automatically with error in blue screen. in this case what should i do?  i have using bootcamp 5

    After installing the windows 7 64 bit, it will restart automatically with error in blue screen. in this case what should i do?  i have using bootcamp 5

    if it's restarting directly into an error, you can try troubleshooting (might be painful) or re-install windows with boot camp

  • Hi, i have a A1186 Mac Pro 2008 Tower. Im running windows 7 64Bit on it. Im not sure about what version of bootcamp should i use to get the drivers. Someone please help me.

    Hi, i have a A1186 Mac Pro 2008 Tower. Im running windows 7 64Bit on it. Im not sure about what version of bootcamp should i use to get the drivers. Someone please help me.

    Boot Camp support:
    http://www.apple.com/support/bootcamp/
    Boot Camp FAQ:
    http://support.apple.com/kb/HT5639?viewlocale=en_US

  • I would like to know if there a way to use window (via bootcamp) and use a dual screen with the use of thunderbolt?

    I would like to know if there a way to use window (via bootcamp) and use a dual screen with the use of thunderbolt?

    There are very specific requirements for using an iMac as an external display.
    From Target Display Mode: Frequently Asked Questions (FAQ) - Apple Support
    What are the requirements for TDM?
    A Mac notebook or desktop with a Mini DisplayPort or Thunderbolt connection
    A Thunderbolt or Mini DisplayPort cable
    A supported iMac with OS X 10.6.1 or later. The table below shows iMac computers that support TDM, the required cables, and the port of the computer to which you are connecting the iMac.
    iMac Model
    Cable Supported
    Port on Source Computer
    iMac (27-inch Late 2009)
    Mini DisplayPort to Mini DisplayPort
    Mini DisplayPort or Thunderbolt
    iMac (27-inch Mid 2010)
    Mini DisplayPort to Mini DisplayPort
    Mini DisplayPort or Thunderbolt
    iMac (Mid 2011)
    Thunderbolt to Thunderbolt
    Thunderbolt
    iMac (Mid 2012 and later)
    Thunderbolt to Thunderbolt
    Thunderbolt
    Note that the iMac (Retina 5K, 27-inch, Late 2014) does not support Target Display Mode.

  • Can you run windows via bootcamp on the macbook pro retina display 2.5GHz dual-core Intel Core i5 512GB flash storage1

    Can you run windows via bootcamp on the macbook pro retina display 2.5GHz dual-core Intel Core i5 512GB flash storage1

    http://www.apple.com/support/bootcamp/

  • I have downloaded firefox. while running the software i have got an error as "software corrupt".what is the problem i am facing?

    i have downloaded firefox. while running the software i have got an error as "software corrupt".what is the problem i am facing?

    -> Uninstall your current Firefox
    * https://support.mozilla.com/en-US/kb/Uninstalling%20Firefox
    * DO NOT SELECT TO REMOVE USER DATA AND SETTINGS
    * Restart your system
    -> Download latest Firefox version from one of these links using some other Web Browser:
    * http://www.mozilla.com/en-US/firefox/new/
    * http://www.mozilla.com/en-US/firefox/central/
    * http://www.mozilla.com/en-US/firefox/fx/
    * http://www.mozilla.com/en-US/firefox/all.html
    -> Install Firefox using the downloaded & saved Firefox installer file
    * https://support.mozilla.com/en-US/kb/Installing%20Firefox%20on%20Windows
    Check and tell if its working.

  • I downloaded a adobe flash update and my computer and after next logon got a blue screen.   could only start in safe mode and until uninstalling the flash player could i safe mode with networking.  i cannot open any microsoft products now. I get a message

    i downloaded an adobe flash update and my computer after next logon got a blue screen.  I could only start in safe mode and until uninstalling the flash player could i start in safe mode with networking.  i cannot open any microsoft products now. I get a message saying adobe acrobat 10 is not designed to run on windows or uninstall and reinstall it ....but it will not let me uninstall it.  What do i do?  is this all an adobe issue or a windows problem??  thanks   Tim

    Hate to suggest this, but you need to ask in the Flash forum. This forum is for Acrobat.

  • I have a touchsmart running windows 7 and i cannot get my screen saver to work

    i have a touchsmart running windows 7 and i cannot get my screen saver to work

    Hello. You need to change the energy use setting that computer uses max it out. Then it will work just fine. My is touchsmart 600-1050. The computer was preset to use minimum amount of electricity when in idle. I changed all the setting to high. Now every thing runs just like a Windows XP version computer. Thats how I got my screen savors to work. I also upgraded my Windows 7 to Windows 7 Ultimate now I am able to run a lot more XP software. Test your pond screen saver make sure that working with windows open. That will tell you if it is a software issue if it doesn't work. That is the case then restore it from your D: drive.

  • I installed the window 7 os in to my mac book pro. after that the partition is not supported and then the folder with question mark flashing on my screen. plaese helf me what to do next to resume the mac os x?

    i installed the window 7 ultimate OS in to my mac book pro. after that the partition is not supported and then the folder with question mark flashing on my screen. plaese helf me what to do next to resume mac mac os x?

    Assuming that you tried to install Win 7 in bootcamp.
    Power on the machine and press and hold the "option" key when you hear the bong sound.
    Select the Macintosh HD icon and press "return" or just click on the icon.
    Once booted into OS X go to System Preferences and select the Startup Disk icon and configure startup to use the Macintosh HD.

  • HT204053 I am running Windows 7 and have tried to install iCloud.  No matter what instructions I follow, I still get the error message "This Apple ID is valed but is not an iCloud account."  How can I resolved this?

    I am running Windows 7 and have tried to install iCloud.  No matter what instructions I follow, I still get the error message "This Apple ID is valed but is not an iCloud account."  How can I resolved this?

    I've tried both. First, I tried on my pc, where iTunes had installed iCloud when it last updated. I have iTunes installed on this computer (and on my iPad and iPhone), but that wasn't the issue.
    So I went online, thinking I needed a separate iCloud Apple ID, but it prompted me for my current Apple ID and gave me the message about my ID being "valid" but not an iCloud account," which, lol, was what it had asked me to do in order to create one. I checked, and at least one other user is having the same issue. I'll attempt to copy/paste the Support request url: https://discussions.apple.com/thread/4430653?tstart=0
    Thank you for any help you can give.
    Trish

  • I am running OSX Lion 10.7.4 and the computer no longer will go into sleep mode when I close the cover What happened with this option?

    I am running OSX Lion 10.78.4 and the computer will no longer go into sleep mode when I close the cover. In system preferences I can no longer find the option that allows for this energy saving feature. What happened to this option and why is this no longer happening with the latest version of Lion?

    No external monitors or devices attached. When you mention that this function only works when devices are attached that is true when you set up your preferences that way. Up until my upgrade to Lion the computer would always go into sleep mode when I closed the lid. There also used to be an option to check in system preferences that allowed you to choose this option. My question for the discussion is what happened to that option and how do you get the computer to sleep or at least the display to sleep when you close the lid as we have been able to do in the past. Thanks.

  • What happens with bootcamp after ios update

    Hello,
    I am about to update from ios 10.7 to 10.8 (Mountain Lion). What happens with my (data on) bootcamp? Do I need to reinstall it?
    Thanks in advance.
    Regards,
    Marcel Rombeek

    iOS and Mac OS X are completely separate things, so I'm a bit confused. But assuming you're referring solely to updating Mac OS X, upgrading to Mountain Lion should not affect your Bootcamp partition in any way, though with Mountain Lion not yet released, we can't say with absolute certainty.
    Regards.

  • I have turned off my iphone 5s but i got a blue screen when i tried to turn it on back, and i tried to press the power button with the home button but it wont work

    i have turned off my iphone 5s but i got a blue screen when i tried to turn it on back, and i tried to press the power button with the home button but it wont work

    fadijaber wrote:
    i have turned off my iphone 5s but i got a blue screen when i tried to turn it on back,
    The Basic Troubleshooting Steps are:
    Restart... Reset... Restore from Backup...  Restore as New...
    Restart / Reset  >  http://support.apple.com/kb/ht1430
    Backing up, Updating and Restoring >  http://support.apple.com/kb/HT1414
    If you try all these Steps and you still have issues... Then a Visit to an Apple Store or AASP (Authorized Apple Service Provider) is the Next Step... Be sure to make an appointment first...

Maybe you are looking for

  • Returning the file count of a folder--too slow

    I am using the following to return the file count of a folder as part of a larger script with timeout of 5000 seconds tell application "Finder" set origFolder to "Somefolder" as alias set thePivotfiles to (every file of origFolder whose name ends wit

  • Tree Map Issue in Dashboard for IPAD

    Hi Experts, i have used Tree Map in My Xcelsius dashboard but tree map chart is not supported in IPAD.Can any one suggest me the chart which will fulls fills the tree map or if any workaround for that. Using Dashboard Version:Dashboard 4.1 I really w

  • Opening CS5 project in CC2014 - Timecode is different on spanned clips

    Hi All. I am having issues opening the CS5 project in CC2014 (latest update). Here's the story - I was editing a documentary project on an old Mac Pro and needed to upgrade (speed and storage wise). So I am now working on a thunderbolt 2 lacie drive

  • How to become oracle expert

    Hi all, I would like to be a oracle expert ,so wht r the steps,require frm the study material point of view and also frm workshop point of view please guide me

  • Icloud wont take my username and password to set up my new phone?

    I got the iphone 5 and i need to restore it from my old iphone. It says my username and or password is wrong but i can sign in here and do everything else with it.