While saving a opport page needed in editable mode till errors are present

hi all,
When i save any opport with errors it gets save with errors messages but the page is in non-editable mode but we want it in the editable mode till the errors are not removed fully.
Any pointers will be highly appreciated ,
Thanks in advance,

Hi,
Can you not bring the transaction in editable mode by clicking on the Edit icon.
Regards,
Deepak

Similar Messages

How to know when page is in edit mode ?

Hello,
I've written a custom item (plsql) and want to display somthing different when the page is in edit mode (url contains mode=16). I've tried to get the GETQUERY context var but it only displays the pageid ... the rest of the url is missing. Is there another var or some other api I can use to get this information ?

I have already checked for VA02 -> Line item -> Environment ->changes. It show changes related to fields available in VA02.
But it is not showing changes related to Serial number change.
I have also checked with table CDHDR, CDPOS. But the data related to change in serial number of SO line item is not captured in those tables also.
Is there any other way to know?

Page incomplete in edit mode

I use frames, and when attempting to edit one of the frames, the correct frame comes up but it is incomplete with about 50%missing. I suspect this may be from a far earlier version of the page. So how do I get to the current page to edit. If you go to www.cruisemasters.org you'll see the opening page. However, the editing version stops after the bulleted points, with no mention of the blog reference nor the chart about licensing.
Mike

If you place a frame in edit mode, only the contents inside that frame will be placed in edit mode.
Also please share the screenshot of the page placed in edit mode, this might help in understanding the issue better.

Page malfunction in Edit Mode

I've never had a problem before with Contribute, so it is odd
having to post to these forums. I thank anyone and everyone that
replies in advance for your assistance.
I am using Contribute 3.0 to work with a client's web site.
Unfortunately, one of the pages loses all of the content in between
the header and footer, and I'm not quite sure what's going on. It
looks just fine in the "browse" mode of Contribute -- as well as in
any regular web browser. The only time it looks bad is in Edit mode
-- and it is the only page on the site that does this.
You can see the page as it looks in Contribute here:
http://www.dreadnoughtwines.com/listpage_error-screenshot.jpg
I've looked at the code for the site, and I can't figure out
what's going on. Can anyone help me at all? I'd really appreciate
it!
Regards,
Joe

I had this same problem, I was able to fix it by putting full
paths to my CSS and image files. However I still have another
problem in Edit Mode myself, I created a region, where I can edit
the main text block on the page. However I am only able to use the
mouse to edit the bottom half of the text. I can use my keyboard to
arrow up to the lines above this and add the text. The other odd
thing is, when I start typing text, it doesn't show up. But when I
review the page on the temporary URL, it does display the updated
text. Anyone seen this problem?

Is there a way to detect if the page is in edit mode or not? [WC Framework]

I just can't find any system bean to provide such information. If any one know, that'd be very helpful.
This is for Webcenter Framwork (not the Space). and by "edit-mode", I mean when user hit Ctrl+Shift+C and the blue dotted lines show up.
Thanks in advance
Edited by: Chris_Jo on Jan 25, 2012 12:16 PM

Following EL will do what you want:
#{composerContext.inEditMode}In other words, the composerContext bean is available, even in a WebCenter Portal application. If you take a look at the default template (pagetemplate_globe.jspx) that is created when you create a webcenter portal application. On line 16, you see an example of the usage.
edit: sorry... Didn't see you meant the contribution mode...
Edit mode is by pressing ctrl+shift+e
ctrl+shift+c is called contribution mode...
I just looked at the source code of the content presenter taskflow and this is what they are using to show the dotted line:
inlineStyle="#{composerContext.subView == 'contentContribution' ? 'border:2px dashed blue' : ''}">So I guess #{composerContext.subView == 'contentContribution'} will return true if you are in contribution mode. This should work both in spaces as in framework.
Hope this helps.
Edited by: Yannick Ongena on Jan 25, 2012 8:10 PM

When running in edit mode get error

When I sgtart Premiere Elements in the edit mode I get an error. The error "There Is No Disk In Drive. Please Insert A Disk in Drive \Device\Harddisk\DR". I am running on Windows 7 X 64. I have no such drive on the system. Any ideas as what is happenong. I have tried reinstalling the program but the error persists. Thanks for any help.

Dbritt26
This is an old story which may have a solution if your program is Premiere Elements 13.
If your program is version 13, then delete or rename the OldFilm.AEX file from OldFilm.AEX to OldFilm.AEXOLD.
That file is found
Local Disk C
Program Files
Adobe
Adobe Premiere Elements 13
Plug-Ins
Common
NewBlue
and in the NewBlue Folder is the OldFilm.AEX file.
Please let us know the outcome.
Thanks.
ATR

Saving css file while saving a web page

Hello,
when i save a web page using SAFARI, I cannot save all the content. I just got the HTML. Which is fine but... what if i want to save also other content, exspecially CSS. In IE you easily can. Why not in SAFARi?
Or maybe it could be done and I simply don't know...
thnaks,
Rocco

Safari 2.0.x for OS X 10.4 will allow you to save the whole contents of a page in a format that isn't too easy to extract items from.
Give either Camino or Firefox a try, both of which will let you save a full static version of the website for off-line viewing.

Contribute shows blank page when in edit mode.

I have installed Contribute for a friend so that they can update their website.
We can connect fine - but when we try to edit the page contribute just gives a blank screen (white page)
this happens on every page of the website that is tried.
The guy that developed the site uses includes - i.e so there is one main page and the links use an id ref to
go to the other parts of the site - I'm thinking this may have something to do with it?
Any ideas on how to resolve?
Help greatly appreciated.
The site is - http://www.guardforcesecurity.co.uk

All current and previous Contribute versions can't handle server side includes. Contribute CS5 due out at the end of this month supposedly will fix this, says Adobe. I'll reserve judgement till I saw it myself.
So if your page basically consists of included content only, it's quite possible that you wont see much of anything in Contribute CS4 when you hit Edit Page..

Crystal Reports for Enterprise 4.1: Error while saving report to BI platform "There was an unexpected error saving your report to the server. Please try again or contact your administrator if the problem persists."

Hi All,
I am able to create a report in Crystal Reports for Enterprise 4.1 on top of an OLAP connection (data source BEx query). However, when I am trying to save this report to BI platform, I am running into the following error:
The error was not resolved even after applying the following SAP KBA notes:
1676033
1709390
1922003
1727813
Below is the excerpt in the error log (on the path mentioned in SAP NOTE: 1709390),
However, could not make much sense out of it, as to how can the issue be resolved. If anyone has useful insights on this issue, please share the same with me.
Regards,
Alston

Hi Alston
Since you have CR for Enterprise then you also have BI and thus most likely you also have an S user ID. You can use the S user ID to create a phone incident at it is part of your Enterprise Support Package. Just saying as this may be the most efficient way of proceeding at this time(?). But please don't take as me trying to push you off of SCN .
- Ludek
Senior Support Engineer AGS Product Support, Global Support Center Canada
Follow us on Twitter

I need to see what VLAN-ids are present on a trunk interface. What debugs would help me achieve this?

Currently, i have an Cisco IE3000 switch, with an interface defined as a trunk. The other end is unknown to me, but I know it transmits tagged frames. I just don't know which VLAN-ids are in use - so I was thinking on doing some debugs to learn the VLAN-ids. Remote end does not transmit BPDUs

That would require me to define all VLANs, which may be to much for the IE3000. It supports only 1005.
A debug telling me that a packet have been dropped because the VLAN is not defined - would be the way...

Getting Brain Error while saving the query--Need Immediate solution

Hello Experte
I designed query like this.
G/L account structure is defined in Rows. Before explaining about columns Let me Explain u about my ORG structure.
Company codes are defined in R/3 like this.
Company Code
1000 for Local Currency(HSL01)
2000 to 7000,IEL for group Currency(KSL01).
Iu2019m extracting the data as it is from R/3 to DSO and again by writing routine I splitter the data for months(EX: HSL01 is ApriL,Hsl02 May,u2026u2026u2026u2026u2026u2026.KSL01 April, KSL02 may,u2026u2026u2026. Upto to 16 periods) this is R/3 data. This data I differentiated based upon currency types. If currency type is 10 then Local Currency 30 Means Group Currency.
Again Iu2019m receiving the data from Flat Files for subsidiaries(IEAI,IEG,IEEL,ISSCI,IHAL,TTM-US,TTM-INDIA,TTIT). This data I loaded first into DSO by writing Routine at field Level for G/L account to convert G/L Descriptions into Numbers.
After that I loaded data from first DSO to Second DSO by writing to convert respective currencies into INR and again loaded to cube by Direct mapping.
Again Iu2019m receiving the eliminations data from R/3 through Ztable. This also Iu2019m extracting from R/3 and loaded into dso and again into cube.
Now I will Explain about my Report.
In Columns I defined 3 selections for each month. U can observe that in Document. Like that for each month Iu2019m getting three selections and for subsidiaries 2 selections for each month. If we observe total Iu2019m getting 13 selections for India and 9 selections for each subsidiary. If subsidiaries increase I need to increase selections, automatically columns will increase. Now for Q4 2 new subsidiaries are added I need to added. After adding and while saving the query then only Iu2019m getting brain error.
Could any one sort out this.
Thanks,
Sony

HI Ravi,
Thanks for the reply.
While saving the query in BEX i'm getting this error.
Diagnosis
Query ZQ3_MISGRPSUMMARYREPORT_010209 contains 8192 differing selection cells. However, only 8191 selection cells can be processed in a query.
Procedure
Please simplify query definition ZQ3_MISGRPSUMMARYREPORT_010209.
This was the error i'm getting. How to simplify this....
Any answers please.
Thanks,
Sony

Could someone help me with a Runtime Error while saving a PDF file?

While saving a 28 page PDF file in Illustrator today, I got a window saying, "This application has requested the "Runtime" to terminate it in a unusual way." It said to contact the applications support team for more information. I keep getting the same thing each time I try it. Does anyone know how to fix this issue or how I contact the applications support team ?
Thank you for any insight.
Pam

It is a 13.5x11 inch calendar. There are 14 pages with images on them and
some text. The other pages have text, a grid and a colored background with a
gaussian blur. I saved each page as an "outline".
The printer I am using requested I save all pages in a pdf file. I was
successful in saving all but about six pages, now I can't even open the
file.
What happens is... I open Illustrator
                               I open the pdf file
                               A window appears that says... Runtime Error,
This application has requested the Runtime to terminate it in an unusual
way. Please contact the application's support team for more information.
                               I select ok
                               then a window appears that says... Adobe
Illustrator CS5 has stopped working. A problem caused the program to stop
working correctly. Windows will close the program and notify you if a
solution is available.
                               Then the program closes.
So far I have not been notified of anything.
Please let me know if you need more details.
Thank you so much for helping me with this.
Pam

Error while saving for Objective setting

Hi,
While saving the Objective setting templates i am getting the error as "Table HRPAD605 is not part of the Customizing object PDST T "
Error documentation is as follows
Diagnosis
Entries in table HRPAD605 cannot be edited in connection with customizing object PDST T as table HRPAD605 does not belong to customizing object PDST T, according to the object definition.
System Response
The function terminates.
Procedure
Check whether the entered objects and keys are correct.Then check in the Implementation Guide whether the object was created correctly.
Correct the object definition or the entry for the Transport Organizer interface.
Thanks

Hello,
Most likely the is an inconsistency with the transport objects PDST and PDWS. Please run RHSOBJCH to correct this inconsistency.
Afterwards you should be able to transport the templates via the catalog or via RHMOVE30. Please make sure that the category ID in the target system is the same otherwise you won't be able to locate the template.
The report RHSOBJCH corrects the missing HR entries in the OBJS table.
This step you need to perform only once. For OSA you need to overtake
*5020 up to *5026, also PAD605,606 and 607 references.
When you have done this (as said, only need to do it once) you can transport the categories and templates via the phap_catalog_pa transaction (righ-mouse click on the to be transported object).
Hope this helps,
Regards and Groetjes,
Maurice

Dereferencing the NULL reference while saving a Survey

While saving a survey first time, I am getting an error message "Dereferencing the NULL reference".
More details as follows:
Exception: Class CX_SY_REF_IS_INITIAL
Program: CL_SVY_H_SVYDETAIL_IMPL=======CP
Include: CL_SVY_H_SVYDETAIL_IMPL=======CM001
ABAP Class: CL_SVY_H_SVYDETAIL_IMPL
Method: DO_PREPARE_OUTPUT
Line: 26
Long text: An attempt was made to execute a dynamic method callon an initial(NULL-) object reference. The reference must refer to an object.
I opened the Survey creation page in crm ui, and filled in the ID, Application as Marketing and selected CSS Style Sheet as CRM_SVY_OPP_WINLOSS.CSS
I am very new to CRM module.
Regards,
Harsh

Are you using internal CATT Server? If yes then you might need to turn on the CATT server again, see below:
JTS based internal CATServer:
Execute method SET_CATSERVER_JTS of class CL_SURVEY_CATSERVER. Leave parameter USER empty.
ABAP based internal CATServer:
Execute method SET_CATSERVER_ABAP of class CL_SURVEY_CATSERVER. Leave parameter USER empty.
Cherrs,
Ankur

Default the Name of the Adobe Form while saving

Hi,
I am calling an Adobe Form from Webdynpro. While saving the form i need to default the name of the Form. Can anyone help me to solve this issue.
Thanks & Regards.

Hi Manikandan
I got a requirement as exactly you have posted, default the PDF filename while saving it (In Adobe forms).
If you have any solution for it, kindly share it with me.
Thanks & Regards,
Rajesh P

While saving a opport page needed in editable mode till errors are present

Similar Messages

Maybe you are looking for