While saving Bex query with Technical name, it says Query already existing

Hi,
I am facing a problem. While saving a query withy its technical name (for example ZQYZMPR_01), it says that query is already existing. But when I search for the query in all tabs like Favourites, Roles, Infoprovider It is not found.
I also checked a view V_REP_JOIN. In this view I find Query (ZQYZMPR_01) in MODIFIED version.
I want to use my previous query instead of creating new one.
Suggest, how can I retrieve my previous query that I am unable to search for.

Saurabh
Searching with descriptions may lead to confusion as there may be similar descriptions to a query but just one technical name. Check the query 'where used list' you may find answers.
Can you check the query in RSZCOMPDIR ? If the query exist here, it must be there in the system. Do the search with exact technical name ZQYZMPR_01 or ZQYZMPR*, you should be able to find. Do not search in specific areas like roles etc..search directly by inputting the tech. name.
Ferdinando - you can delete the query in RSZDELETE transaction. While doing so, it will prompt for removal from all areas like roles, workbooks etc. Say 'yes' and delete, you will be able to assign the technical name to another query.
Ramesh

Similar Messages

"File with specified name and version number already exists. Result code= -48." ...????

Recently I have been getting this error message when I try to record an audio track in Logic... "File with specified name and version number already exists. Result code = -48." WHAT IS THE PROBLEM?????? It's making me furious!

Hi
As the message says, there is a file at the recording directory that has the same name:
http://support.apple.com/kb/ht1618
Try changing the name of the track (this sets the filename in later versions of Logic 9
CCT

How to change Query Description/Technical name of a query

Hi I have couple of questions with Query name changing.
1)Is it possible to change the Technical name of a query?
If Yes how?
2)I could change the description of a query but when the same query is saved in a role how to change its description?
Thanks
Ajay

hi,
open your query in query designer and use button 'save as' then you can change name description.
Remember that when you change technical name it will be completely new query and you will have to add it to your role.
Regards,
Andrzej

Error while saving Views in Portal - Technical name not valid.

Hi,
When saving Views in Portal, I'm getting the message The Technical name of object QVIW is not valid. I've searched the forums but couldn't find any solution to this issue. We are on SP 16. Any help would be appreciated.
Thanks & Regards,
Hari

Dear Harikrishna,
while saving iviews in portal..
it will prompt for some mandetory columns is it.. one is for description..
and the iview name like iv<name of the template>.. this should be without space..
and in the next page u should give technical name of the template as 'template=<name of the template'
in this you should not give any space..finish and save the ivew..
hope this would help you.

TF207012:You cannot save this query with this name because another query that uses this name is already open.

Hi,
I am developing a custom control in TFS2012 using c#. The custom control is a button, when I click it in UI, the current work item will be saved in the next state.
But if I new a workitem using the button and save it using "save work item" button after changing something, I always get an error called TF207012. After I close the error message, the workitem has been saved.
How can I removed this error message?
Any help will be apperciated.Thanks.

Hi Aodixius,
For this issue, you might check whether you have defect in your custom control. Generelly, you may also need to custom a web control for team web access after customizing for Visual Studio. About custom control for TFS work item, check the links below for
more information and make sure your custom control works.
https://witcustomcontrols.codeplex.com/
http://blogs.msdn.com/b/greggboer/archive/2010/03/30/work-item-tracking-custom-controls.aspx
http://blogs.msdn.com/b/narend/archive/2006/10/02/how-to-use-custom-controls-in-work-item-form.aspx
Best regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Mapping between the query/report and the role with technical names - BI Sec

Hi,
How to find the mapping between the query/report and the role with technical names ?
Like in R/3 we can find the mapping using table AGR_TCODES or thourgh SUIM. However in BI all reports have tcode RRMX.
So. how to find the role for a given query/report like sales report with technical names?

I looked into this quite a while ago and cannot remember the exact details, but I think there were 3 tables needed together with a structure to explore with a function module, and you need to use the program ID to think them.
If you look in SQ01 then I am sure you will find one of the tables, and then search from there onward.
Alternately, while searching you might find a nice report which does this for you.
Hope that helps and let us know whether you find it.
Cheers,
Julius

Mapping between the query/report and the role with technical names

Hi,
How to find the mapping between the query/report and the role with technical names ?
Like in R/3 we can find the mapping using table AGR_TCODES or thourgh SUIM. However in BI all reports have tcode RRMX.
So. how to find the role for a given query/report like sales report with technical names?
Edited by: Phoenix on Jul 26, 2008 4:15 PM

Posted in wrong forum

Display technical name of a query in a web template ?

Hi,
I try to display in a basic web template the technical name of my query with a web item. In this order, I have tried to use the web item 'Text Elements' but how could I configure the latter in order to have only the technical name ?
I have selected 'Display General Text Elements' in properties of the web item.
In the property 'List of Text Elements', what is the couple of values that I have to configure ?
Many thanks,
CG.

Hi,
What you need to do is, keep a TEXT Web Item in the template.
Then do not tick any of the options under Specific. Instead, go to List of Text Elements. In the first column, select General Text Symbol. In the next column type REPTNAME.
This will give the technical name of the query in the output.
Common text elements:
u2212 technical name of the query (REPTNAME)
u2212 description of the query (REPTXTLG)
u2212 InfoProvider (INFOCUBE)
u2212 key date for the query (SRDATE)
u2212 accuracy of the data (date and time) (ROLLUPTIME)
u2212 the person who wrote the query (AUTHOR)
u2212 the last time the query was changed (date and time)
(MODTIME)
u2212 the last person to make changes to the query (MODUSER)
u2212 current user (SYUSER)
u2212 the last time the query was refreshed (date and time)
(SYUZEIT)
Try this. Hope it helps.

Find technical name of receiving query in RSBBS assignment

Dear Experts,
under transaction RSBBS one can assign sender/receiver details. While the technical name of both sender and receiver are entered when createing the RRI, one can only retrieve a compressed ID (i.e. 46F28FNV1L4H1QENI1KKEKWUCAZPAOPRD) for the receiver in transaction RSBBS.
We would like to find a way to determine the technical name of that particular compressed ID. I have already searched the RSBBS* tables, but I cannot get past the compressed ID (field RONAM) in i.e. table RSBBSQUERY
My question:
- Can you provide me a table/view/program/transaction/... that shows the relationship between senders and receivers by means of technical query names (not ID's)?
- Or can you provide me (step-by-step) the relation between different tables and fields that would allow me to do so?
Kind regards,
PJ

Hi Simon,
thank you for your reply. I have researched your proposal, and I can indeed find the relation between my sender query's technical name ZSENDERQUERY_Q001 and the field RSBBSQUERY-RONAM that looks like this: 46U5CEI2BU3U8P8GZOFWWN3GKAZSD_C03 (Mind the name of the infoprovider at the end!).
This information can also be retrieved from transaction RSBBS, where I can enter 1 senderquery's technical name, and which returns me the associated RSBBSQUERY-RONAM values in the column "Receiver Object". Your contribution allows me to create a view to get this information for multiple sender queries from different cubes.
However, I would like to go one step further. From this RSBBSQUERY-RONAM value I would like to get the target/receiving query's technical name that looks like this "ZRECEIVERQUERY_Q002".
This is my ultimate goal as I need to delete all obsolete queries from the BI system, and the associated jumpqueries. Creating a single list by means of a view would help me a lot.
Kind regards,
Pieter-Jan

Identifying Technical name of a query through a portal link

Hi,
If from a portal link I see a BW report, how can I know its technical name so that I can access it in BEx to see the query definition. The title on the portal appears not to be helping.
Thanks

In the future, please do not post the same question more than once:
Identifying Technical name of a query through a portal link
Thanks!

View Element with ID _CFG_GROUP_36_CAPTION in View V_PREVIEW Already Exists

Dear All,
In EHP5 'Personal profile' Service, I was trying to modify the detailed screen of Address Information for Great Britain through FPM configurator. On the default detailed screen for this country, there was one group called 'Communication' . I wanted to hide that group. I thought I can achieve this by modifying attribute of this group. There were two attributes 'sequence Index' and 'Column' which decides position of specific group on detailed screen. I made value against these attributes as 0. But after doing these changes I am not able to see the preview of this detailed screen. It is throwing following runtime error:
View Element with ID CFGGROUP_36_CAPTION in View V_PREVIEW Already Exists.
How to revert the changes made in the attribute of this group.
Regards,
Swapnali

check these steps
1. Customizing the Fields in Overview Screens
http://help.sap.com/erp2005_ehp_05/helpdata/en/77/804c18e1844944b7f8baf5
3159be78/content.htm
2. Configuration of Personal Profile Services
http://help.sap.com/erp2005_ehp_05/helpdata/en/3a/fe6eac579d4a9ead651d77
9a2dbd23/content.htm
3. Personal Profile application Documentation
http://help.sap.com/erp2005_ehp_05/helpdata/en/14/60cd56b1514ae5aa811d2a
a4a59de3/content.htm
In EhP5 ESS Personal Profile application, in order to change the
Address overview page fields, you need to adapt the Address component
configuration HRESS_CC_PER_OVR_ADDRESS_XX.
Note: In EhP5, ESS screens are based on Floor Plan Manager for
WebDynpro ABAP Generic UI Building Block concept. To configure
overview page fields we no longer use 'Determine Fields for Business
Card on Area Page' View instead of that we adapt the FPM configurations.
In the standard delivery in the Overview Page, always international
Address is displayed and in the edit screen based on the country
selection (Foreign Address scenario), corresponding country screens
are displayed.
Note: We always show international address screen in overview page in
order to support Foreign Address scenario.
If you want to chanage the fields in the Address overview page fields
then adapt the Address component configuration

I want to create a new apple id with another email, It says email already in use...

I want to create a new apple id with another email, It says email already in use, but there is no account with that email( i use it for facetime and get apple offers) What do i do?

You can check to see if it is associated with one of your IDs by following this: http://support.apple.com/kb/HT5625, and entering the email address at step 2 to see if it finds an ID owned by you. If it doesn't, contact the Apple account security team and have them check into it by going to https://expresslane.apple.com, then click More Products and Services>Apple ID>Other Apple ID Topics>Apple ID account security.

Error while saving Bex Query

Hi all
I created a Global RKF in Query desinger and when i click on Save button, it is throwing error
[Query name] contains errors do you want to save anyway?
why i am not able to create RKF, If i delete that RKF and click SAVE its working fine, but if I create a Global RKF it's throwing error.
What i Did is I select the option No, and tried to create again the same RKF with same Technical name then it says already RKF exists but i dont see that in any other query's too, then i logout and once again login and tried with same technical name and same RKF then it worked but for only one RKF, when i create another RKF and save query same error is showing up.
Did any one face this issue before?
Thanks

In SAP we can't create any of the objects with the same Technical name, but you can create the objects with same description with different Technical names...
You might have checked the Description which is same for the other RKF you are referring too...
Why you want to create the RKF with the same name? why don't you make use of already existing one?
If you are not able to find it ,,some body might have created and later they had deleted it. but the entry is still there in the tables.
Give a try and check out your self...

Query Displaying Technical Name instead of Description

Hello,
Is there a setting in query designer that would cause the query technical name to display when the query is executed instead of the query description? I am using BEx 3.5. When I Save As the query to a different technical name and execute the description shows. I would like the description to show as it does with all other queries.
Any help would be appreciated.
Thanks!
Tina

Hi Tina,
For me the most convienent way is to create a text variable with customer exit, not ready for input.
Assign this variable to Query description in properties of query. So you can be sure to see the current
technical name after saving the query again, without any additonal actions.
You could even combine this variable with any description desired.
Assuming variable created is Z_COMPID, please add code as follows to user exit:
WHEN 'Z_COMPID'.
      L_S_RANGE-LOW = I_S_RKB1D-COMPID.
      L_S_RANGE-SIGN     = 'I'.
      L_S_RANGE-OPT      = 'EQ'.
      APPEND L_S_RANGE TO E_T_RANGE.
Regards
Joe

Error while saving Work book with XLSM extension

Hi All,
While i saving workbook in excel 2007 with extension XLSM,
Its not allowed.How i can proceed with this.
I am using SAP BI 7.0
please let me know what i need to do.
Krishna

Ensure that you have not opened any excel file or text file with similar name.
thanks
G. Lakshmipathi

While saving Bex query with Technical name, it says Query already existing

Similar Messages

Maybe you are looking for