While saving maintenance order system throughing error

Hi,
we have assigned wbs element in Add data tab , But while saving that order system throughin error as"Assigning PM Order to WBS Element L-DI-0001-3-1 is not Allowed"
regards
Ganesh

Hi
Can you post the exact message with number
regards
thyagarajan

Similar Messages

  • Error while saving service order?

    Dear SAPIENTS,
    While saving service order system is throwing error in commitment check
    message number  CO634
    can anybody tell where i need to check to resolve this problem?
    Regards,
    Kaushal Rai

    hi
    In FMAVCR01 you can see the amount avaialble for the fund center and commitment item combination ,
    in the maintenance order itself from the menu Goto>Assignments>fund center
    i think you are using the funds management where the system picks up the commitement item for the respective material in the order you specified ,kindly consult with your FICO person also
    regards
    thyagarajan

  • ERROR while saving the runtime systems(read time out exception)

    Hi e xperts
    I am configuring NWDI and assigned asll the permissions and roles to the CMS user.I created Domain,in landscape configurater
    created track and saved.
    while saving the rumtime systems the error thrown is
    com.sap.cms.util.exception.conf.CMSCCBSCommunicationException: CBS (URL http://dtlepdev:54400/tc.CBS.Appl/archiveapi2/) communication exception: Read timed out (Service call exception; nested exception is:
    java.net.SocketTimeoutException: Read timed out)
    at com.sap.cms.pcs.conf.communicator.CBSConfCommunicator.removeBuildspace(CBSConfCommunicator.java:382)
    at com.sap.cms.pcs.conf.communicator.CBSConfCommunicator.deleteCreateBuildspace(CBSConfCommunicator.java:338)
    at com.sap.cms.pcs.conf.communicator.CBSConfCommunicator.editBuildspace(CBSConfCommunicator.java:277)
    at com.sap.cms.pcs.conf.communicator.CBSConfCommunicator.createBuildspace(CBSConfCommunicator.java:168)
    at com.sap.cms.pcs.conf.core.services.SystemManagerObject.saveSystem(SystemManagerObject.java:261)
    at com.sap.cms.pcs.conf.core.plugin.DefaultTrack.newTrack(DefaultTrack.java:292)
    at com.sap.cms.pcs.conf.core.TrackManager.editTrack(TrackManager.java:208)
    at com.sap.cms.pcs.conf.manager.CmsConfManager.editTrackConfiguration(CmsConfManager.java:1002)
    at com.sap.cms.pcs.conf.manager.proxy.CmsConfProxyBean.editTrackConfiguration(CmsConfProxyBean.java:489)
    at com.sap.cms.pcs.conf.manager.proxy.LocalCmsConfProxyLocalObjectImpl0_0.editTrackConfigurationand also ..
    Unable to instantiate a Build Space administrator!
    Build Space "DTL_ETRACK_C" [bsID: 27, version: 0] [in-queue: on (privileged), out-queue: "on", processing: off]
    <null>
    [EXCEPTION]
    Buildspace DTL_ETRACK_C does not own the workspace ws/ETRACK/dtl.com_DEFAULTIME/cons/inactive/ .  It is currently not owned by any other buildspace
    at com.sap.tc.cbs.server.rt.bs._BuildSpaceValidator.checkWorkspace(_BuildSpaceValidator.java:120)
    at com.sap.tc.cbs.server.rt.bs._BuildSpaceValidator.validateWSs(_BuildSpaceValidator.java:74)
    at com.sap.tc.cbs.server.rt.bs.BSAdmin.validate(BSAdmin.java:192)
    at com.sap.tc.cbs.server.rt.bs.BSAdmin.updateState(BSAdmin.java:260)
    at com.sap.tc.cbs.server.rt.bs.BSAdminOrc.determineChanges(BSAdminOrc.java:439)
    at com.sap.tc.cbs.server.rt.bs.BSAdminOrc.validateBuildSpaceData(BSAdminOrc.java:219)
    at com.sap.tc.cbs.server.rt.bs.BSAdminOrc.act(BSAdminOrc.java:341)
    at com.sap.tc.cbs.server.rt.impl.CourteousTimer.run(CourteousTimer.java:139)
    at java.lang.Thread.run(Thread.java:534
    In cbs i checked the parametrs they are open and on..
    please suggest me on this ASAP..since 2 days i have been struggling and searched in forums..no perfect solution
    help me out
    perfect soln is immediately awarded...
    I
    THanks
    Mayu

    Hi Mayu,
    here apparently the CMS cannot communicate to CBS properly and then when CMS tries to talk to CBS using a webservice, it times out due to various reasons, see below.
    Strange, I always had this error when the CMS was on a different release like CBS and this caused the communication problem.
    Don't you have an entry in your cms log like this?
    com.sap.cms.util.exception.CMSUnexpectedException                          
    at com.sap.cms.pcs.conf.manager.CmsConfManager.newTrackConfiguration(CmsConfManager.java:666)                                                    
    Caused by: java.lang.IncompatibleClassChangeError
    at com.sap.cms.pcs.conf.communicator.CBSConfCommunicator.openConnection(CBSConfCommunicator.java:84)                                             
    Please provide me the version of the DI_CMS, DI_CBS (and DI_DTR for the sake of completeness).
    You can find this info on the ComponentInfo page.
    On 640/700 this is http://<host>:<port>/sap/monitoring/ComponentInfo
    as of 710 you find this on the "Components" tab of http://<host>:<port>/nwa/sysinfo
    I also think that this is not due to the runtime systems. I guess you have the same problem if you try to create the track without runtime systems, right?
    (The "Unable to instantiate a Build Space administrator!" is not necessarily an error, see the note:
    #1175019 - Unable to instantiate a Build Space administrator!)
    Thank you!
    Best Regards,
    Ervin

  • To set an error while saving the order when the item categor changed in CRM

    Hello SAP Gurus,
    As per our current system set up, whenever the order created in CRM once replicated to ERP should not change the item category in CRM .If the item category is changed( allows the system) and saved, it gives an error as u201CItem category should not be changedu201D. We have been encountering  this type of issue since long back
    To avoid this type of issue, an error should through while saving the order when the user changes the item category in CRM.
    Can someone help me to achieve this.
    Thanks in advance.
    Cheers
    Sreedhar

    Sreedhar,
    Can't you control it by Item Category determination?
    JD

  • Error while creating Maintenance order

    Hi,
    While creating Maintenance order with any order type (PM01,PM02 & PM03) & entering material in component Tab, the system is giving this Error 'Entry does not exist,check your entry'
    The used material is already maintained in the Material Master with all necessary information.
    Kindly suggest the best possible solution for this problem.
    Thanks in advance 
    Rohit8384

    Hi,
    The following error is coming while order processing.
    Entry    does not exist - check your entry
        Message no. 00 058
    Diagnosis
        Input values must be defined in Table MARA. The value or values '  ' are
        not specified in this table.
    Procedure
        Check whether the input is correct and correct if necessary.
    Procedure for System Administration
        If this is not an incorrect entry, check the system settings and change
        them if necessary.
        If there is a connection to the Customizing system, you can maintain the
        system settings by choosing Maintain entries (F5)
    Thanks in Advance.
    Rohit

  • Error while saving purchase order

    Hi all,
    While saving purchase order i am getting the following error.
    Syntax error in program SAPLV61A
    in include RV64A932
    in line 10
    Statement"*&"is not defined.check your spelling.
    Thanks& Regards,
    Hari.

    Hi Hari,
    I've just encountered the same problem as you have now in your latest post.
    Normally the include that you mentioned is a formula condition value include which you can modify but you probably have
    to register this object first on the SAP OSS pages to get an Access key to modify it.
    After you've obtained a key launch transaction VOFM and comment out the line "TABLES: VBRK, VBAK".
    As you see below SAP did exactly the same thing in several other includes.
    Include FV64A582
    -> is a formula condition value
        tx VOFM
                -> Formulas
         -> Condition Value
         -> Routine number 582
    At line 37 I commented out "TABLES: VBRK, VBAK." which is not used
    anyway in this include.
    On top of that SAP commented out these definitions in several other
    includes: eg. FOICH002, FOICH002, OI_LV61ATOI.
    If other persons have comments on this topic please respond/advise.
    Hari, inform us if this resolved your problem.
    Also reward points if my post aided you in resolving your issue.
    Thank you for feedback.
    Best regards,
    Tom Cockaert.

  • Error while saving sales order

    Hi I am encountering below error message while saving sales order:
    Warehouse
    Specify export data in material master
    Then I go to material master to check foreign trade export tab, and I had maintained commodity code export group, country of origin and region of origin, what did I miss? Help.

    Hi,
    Check whether you have activated legal control data for the Sales Order type configuration in Foreign Trade.
    If the Order type is activated then the following error message can pop up unless you maintain in material master.
    See whether export legal control data is activated or not for the order type.
    In IMG Sales and Distribution>Foreign trade>Legal control section
    Regards,
    Saju.S

  • Stop Message while saving Service Order from IW51

    Hello,
    I am getting bleow error while saving service order.
    System: Status object does not exist. Message Numner IW351
    Actually I have done one enhcement in the User exit of the Sales order in the form Routine...
    USEREXIT_SAVE_DOCUMENT_PREPARE
    From this depending upon the some validation i am populating Error message,
    I am creating sales order through service order from the Transaction IW51.
    When i Try to save the service order i get the error messages which is coming from my validation which
    I had put in the MV45AFZZ.
    After the error messgae i press ENTER and then try to change the order by clcicking on the advance shipment.
    As soon as i click on that i get a STOP messgae.
    Which i as below.
    System: Status object does not exist
    I m not getting why it is coming.
    Kindly Help.
    Regards
    Sachin

    Hi,
    After MESSAGE add STOP. :
    MESSAGE ixxx(xxx) with param1 param2 param3 DISPLAY LIKE 'E'.
    STOP.
    or If ambiguity with usage of  STOP being obselete use EXIT after message.
    MESSAGE ixxx(xxx) with param1 param2 param3 DISPLAY LIKE 'E'.
    EXIT.
    BR
    Dep

  • Settlement Parameter change while creating maintenance order

    HI ,
    I am creating maintenance order PM  through transaction IW21 while saving the order based on revison the settlement profile has to change . i am using userexit IWO10009.
    Please send the replay.
    Thanks in Advance.
    Thanks
    satya

    Hi,
    Use this exit for settlement rules. IWO10027 :  User exit: Generate user-defined settlement rule
    Regards
    Ahsan

  • While creating Maintenance order using t-code iw31 mainwork center not pick

    Hi,
    while creating Maintenance order using t-code iw31 Maintenance work center not picking from drop down (already have in drop down)but giving manually accepting.
    --Ganesh

    Hi,
    My understanding is that the selected work center is not copied into the input field. This can be corrected with note [1451299|https://service.sap.com/sap/support/notes/1451299]. Check if the note is relevant for your system.
    -Paul

  • Base unit of measurement while saving production order

    Hi
    While saving production order I am getting following problems:
    "Material has no base unit of measure"
    Whereas UOM is there, I also can see that as soon as I  enter qty while creating the order. System automatically prompts the UOM.
    I also donot find any problem in MRP run, planned order creation etc
    So what can be the problem?
    Edited by: BNR on Nov 24, 2008 5:22 AM

    Dear,
    It may be data base problem as you are getting this problem fequently so please check with Basis person.
    Have you defined the any production unit in both material master WS view & in routing or any other alternative unit of measurement please check?
    Regards,
    R.Brahmankar

  • "Procurement Wizard"  window opens for a particular warehouse while saving Sales Order

    Hello All,
    We have upgraded SAP B1 8.8 to SAP B1 9.0
    My client is facing one of problem while saving Sales order using particular warehouse.
    Actually client is having 4 warehouses (A,B,C,D) in which if they use one particular warehouse "A" for saving Sales order they are facing a issue. The scenario is here below:
    1. Client selects all required details of sales order with along with particular warehouse "A".
    2. On saving SO "Procurement Wizard" is automatically triggered even if procurement document field is unchecked in logistic tab of SO.
    3. This is happening only for a particular warehouse "A". Whereas if I select other 3 warehouses (B,C,D) the system saves SO without trigerring "Procurement Wizard".
    Client is using SAP B1 9.0 PL 08 
    We don't want this  "Procurement Wizard" window to open for this. As we haven't selected any check box for  "Procurement Wizard" so it should not open for a particular warehouse "A".
    Do you think any issue with my warehouse or system settings? Please let me know.
    Please refer screen shots.
    Thanks in advance.

    Hi Saurabh,
    As per your Screen Shot, I think you have Add-on.
    Please stop that Add-on and then check above Scenario.
    Thanks
    Regards::::
    Atul Chakraborty

  • Creation of maintenance order directly through project.

    Hi,
    Is it possible to create maintenance order directly through project while creating network activity?
    Please let me know if it is possible and how.
    Thanks,
    Nilesh

    Hi Abdul,
    Thanks for your reply.
    Can you please elaborate few details on DIPM.
    Thanks,
    Nilesh.

  • What is the BADI  while SAVING purchase order using me22n?

    what is the BADI  while SAVING purchase order using me22n?
    while i will save purchase order through me22n, badi should be fire what is badi for that?
    regards,
    dushyant.

    Dushyant,
    Hopefully you know how to implement the BADI ME_PROCESS_PO_CUST now.
    The following are the codes that you can put in the method "Post".
      DATA: LW_HEADER        TYPE MEPOHEADER,
            LW_POSTED_HEADER TYPE MEPOHEADER,
            LW_VALID         TYPE MMPUR_BOOL,
            ITAB_ITEM        TYPE PURCHASE_ORDER_ITEMS,
            LW_ITEM          TYPE MEPOITEM,
            ITEM_INTERFACE   TYPE PURCHASE_ORDER_ITEM,
            ITAB_ACCT        TYPE PURCHASE_ORDER_ACCOUNTINGS,
            ACCT_INTERFACE   TYPE PURCHASE_ORDER_ACCOUNTING,
            LW_ACCT          TYPE MEPOACCOUNTING,
            LW_POSTED_ACCT   TYPE MEPOACCOUNTING,
            W_ACCT_CHANGED  TYPE C,
            W_GRANT_AMT      TYPE EKPO-NETWR,
            W_FINANCE_AMT    TYPE EKPO-NETWR,
            W_FLAG           TYPE C.
    Check if PO header data is valid
      CLEAR LW_VALID.
      CALL METHOD IM_HEADER->IS_VALID
        RECEIVING
          RE_VALID = LW_VALID.
      CHECK LW_VALID = 'X'.
    PO header data is valid
    Get the newly updated PO header data
      CLEAR LW_HEADER.
      CALL METHOD IM_HEADER->GET_DATA
        RECEIVING
          RE_DATA = LW_HEADER.
    Get the posted PO header data
      CLEAR LW_POSTED_HEADER.
      CALL METHOD IM_HEADER->GET_PERSISTENT_DATA
        IMPORTING
          EX_DATA = LW_POSTED_HEADER
        EXCEPTIONS
          NO_DATA = 1.
      IF SY-SUBRC <> 0.
        CLEAR LW_POSTED_HEADER.
      ENDIF.
    Get PO line items
      REFRESH ITAB_ITEM.
      CALL METHOD IM_HEADER->GET_ITEMS
        RECEIVING
          RE_ITEMS = ITAB_ITEM.
      LOOP AT ITAB_ITEM INTO ITEM_INTERFACE.
    Check if PO line item is valid
        CLEAR LW_VALID.
        CALL METHOD ITEM_INTERFACE-ITEM->IS_VALID
          RECEIVING
            RE_VALID = LW_VALID.
        IF LW_VALID <> 'X'.
    This PO line item is not valid
          CLEAR W_ACCT_CHANGED.
          EXIT.
        ENDIF.
        CLEAR LW_ITEM.
        CALL METHOD ITEM_INTERFACE-ITEM->GET_DATA
          RECEIVING
            RE_DATA = LW_ITEM.
    Get the account interface
        REFRESH ITAB_ACCT.
        CALL METHOD ITEM_INTERFACE-ITEM->GET_ACCOUNTINGS
          RECEIVING
            RE_ACCOUNTINGS = ITAB_ACCT.
        LOOP AT ITAB_ACCT INTO ACCT_INTERFACE.
          CLEAR LW_ACCT.
    Get the newly updated PO item data
          CALL METHOD ACCT_INTERFACE-ACCOUNTING->GET_DATA
            RECEIVING
              RE_DATA = LW_ACCT.
          CLEAR LW_POSTED_ACCT.
    Get the posted PO item data
          CALL METHOD ACCT_INTERFACE-ACCOUNTING->GET_PERSISTENT_DATA
            IMPORTING
              EX_DATA = LW_POSTED_ACCT
            EXCEPTIONS
              NO_DATA = 1.
          IF SY-SUBRC > 0.
            CLEAR LW_POSTED_ACCT.
          ENDIF.
          IF LW_ACCT-LOEKZ <> LW_POSTED_ACCT-LOEKZ OR
             LW_ACCT-KOSTL <> LW_POSTED_ACCT-KOSTL OR
             LW_ACCT-PRCTR <> LW_POSTED_ACCT-PRCTR OR
             LW_ACCT-PS_PSP_PNR <> LW_POSTED_ACCT-PS_PSP_PNR.
    Account assignment was changed
    We will force this PO to go through workflow
            W_ACCT_CHANGED = 'Y'.
          ENDIF.
        ENDLOOP.
      ENDLOOP.

  • Maintenance Order using BAPI error

    Hi,
    While creating Maintenance Order using BAPI.. getting error no E-121  “ Error reading the order 10004009 in the document tables”
    Orders are getting created but, still the error is generated.
    Kindly suggest how to rectify this error.
    Thanks
    Mona

    Hope you are using BAPI_ALM_ORDER_MAINTAIN & BAPI_COMMIT_TRANSACTION in sequence.
    If not, try the sequence.
    You might have referred below thread. If not, please.
    BAPI_TRANSACTION_COMMIT - return error handling
    Is it possible to create orders in SE37 without any error?? If so, try above thread's solution.

Maybe you are looking for