While Saving Notification iw21

Hi Guys,
I have one requirement while saving the notification (i.e. notification no. not saved in database table) this notification is assign to existing order at that time i need to check the swerk (Maintenance plant) available in the location data tab of Iw21 Tcode with the order swerk (maintanece plant) here I want the know how to get swerk field and where this swerk field is stored before save the notification or in which structure this is stored when i am looking in to the viqmel it is not there can any one suggest me how to proceed.
Thanks in advace for ur reply.
sankar.

Do you try with a BADI? I found those when I save the notification.
NOTIF_COST_COLLECTOR
NOTIF_EVENT_SAVE
NOTIF_COST_CALCULATE
(Sorry, I didn´t find the field in Iw21 transaction)

Similar Messages

  • Error messgae while saving the Notification

    HI All,
    We got one requirement, when we are creating the PM Notification (TC: IW21) we are assigning the already exiting PM work Order. After assigning the work order, we are saving the notification. While Saving the Notification the system should check whether the Maintenance Planning Plant (IWERK) and Planning Plant (SWERK) of Notification is same as Maintenance Planning Plant (IWERK) and Planning Plant (SWERK) of PM work Order.  If it is same then Notification should be saved else u201Cerror messageu201D should be displayed.
    Note:
    Maintenance Planning Plant (IWERK) is available in HEADER TAB of Notification or PM Work Order. That is next to Planner Group.
    Maintenance Planning Plant (SWERK) is available in LOCATION tab of Notification or PM Work Order. That is next to Planner Group.
    We are using the user exist QQMA0014 (PM notification: validitye checks during save) for this purpose. We are able to get the IWERK and SWERK value of PM work Order eassily, sine the data stored in AFIH and ILOA table (ILOA-ILOAN = AFIH-ILAON). Even we are able to get the IWERK value of Notification from VIQMEL structure before Notification saved. But we are not able to get the value of SWERK of Notification before saving the Notification because SWERK value is stored ILOA table. For accessing SWERK from ILOA table, we need ILAON from VIQMEL. The problem is ILOAN value is not avialable in VIQMEL before the Notifivation is saved.
    Please let me know how we can get this value or is ther is any other user exit from which, we can get this??
    Regards
    Ramu

    Dear Ramu,
    Can you once again come up with your querry in shot message.
    Regards,
    Kaushal rai

  • RUn time error while  saving po    Field symbol has not yet been assigned.

    Hi Experts,
    I am getting abap dump while saving PO in ME21N  plz seee the below dump  plzzzzzzzzzzzzzzzzzzzzz help me
    Runtime Errors         GETWA_NOT_ASSIGNED
    Date and Time          19.06.2009 11:24:46
    Short dump has not been completely stored (too big)
    Short text
         Field symbol has not yet been assigned.
    What happened?
         Error in the ABAP Application Program
         The current ABAP program "SAPLKKBL" had to be terminated because it has
         come across a statement that unfortunately cannot be executed.
    What can you do?
         Note down which actions and inputs caused the error.
         To process the problem further, contact you SAP system
         administrator.
         Using Transaction ST22 for ABAP Dump Analysis, you can look
         at and manage termination messages, and you can also
         keep them for a long time.
    Error analysis
         You attempted to access an unassigned field symbol
         (data segment 106).
         This error may occur if
         - You address a typed field symbol before it has been set with
           ASSIGN
         - You address a field symbol that pointed to the line of an
           internal table that was deleted
        - You address a field symbol that was previously reset using
          UNASSIGN or that pointed to a local field that no
          longer exists
        - You address a global function interface, although the
          respective function module is not active - that is, is
          not in the list of active calls. The list of active calls
          can be taken from this short dump.
    How to correct the error
        If the error occures in a non-modified SAP program, you may be able to
        find an interim solution in an SAP Note.
        If you have access to SAP Notes, carry out a search with the following
        keywords:
        "GETWA_NOT_ASSIGNED" " "
        "SAPLKKBL" or "LKKBLF99"
        "GEN_FIELD_OUT2"
        If you cannot solve the problem yourself and want to send an error
        notification to SAP, include the following information:
        1. The description of the current problem (short dump)
           To save the description, choose "System->List->Save->Local File
        (Unconverted)".
        2. Corresponding system log
           Display the system log by calling transaction SM21.
           Restrict the time interval to 10 minutes before and five minutes
        after the short dump. Then choose "System->List->Save->Local File
    (Unconverted)".
    3. If the problem occurs in a problem of your own or a modified SAP
    program: The source code of the program
       In the editor, choose "Utilities->More
    Utilities->Upload/Download->Download".
    4. Details about the conditions under which the error occurred or which
    actions and input led to the error.
    em environment
    SAP-Release 700
    Application server... "gplqty"
    Network address...... "128.12.0.19"
    Operating system..... "Windows NT"
    Release.............. "5.2"
    Hardware type........ "8x AMD64 Level"
    Character length.... 16 Bits
    Pointer length....... 64 Bits
    Work process number.. 0
    Shortdump setting.... "full"
    Database server... "GPLQTY"
    Database type..... "MSSQL"
    Database name..... "GPQ"
    Database user ID.. "gpq"
    Char.set.... "C"
    SAP kernel....... 700
    created (date)... "Aug 4 2008 02:33:25"
      create on........ "NT 5.2 3790 Service Pack 1 x86 MS VC++ 14.00"
      Database version. "SQL_Server_8.00 "
      Patch level. 172
      Patch text.. " "
      Database............. "MSSQL 7.00.699 or higher, MSSQL 8.00.194"
      SAP database version. 700
      Operating system..... "Windows NT 5.0, Windows NT 5.1, Windows NT 5.2, Windows
       NT 6.0"
      Memory consumption
      Roll.... 16192
      EM...... 16759360
      Heap.... 0
      Page.... 237568
      MM Used. 12036016
      MM Free. 530432
    er and Transaction
      Client.............. 410
      User................ "SAP_SUPPORT"
      Language key........ "E"
      Transaction......... "ME21N "
      Transactions ID..... "9E955CDE97CBF1648B4C001A64C7B85A"
      Program............. "SAPLKKBL"
      Screen.............. "SAPLKKBL 0500"
      Screen line......... 3
    Information on where terminated
        Termination occurred in the ABAP program "SAPLKKBL" - in "GEN_FIELD_OUT2".
        The main program was "RM_MEPO_GUI ".
        In the source code you have the termination point in line 2908
        of the (Include) program "LKKBLF99".
    Source Code Extract
    Line  SourceCde
    2878       else.
    2879         assign <fs11> to <field>.
    2880         gs_fc = gs_sfc11.
    2881       endif.
    2882     when 012.
    2883       if gs_out_flags-slave ne 'X'.
    2884         assign <fm12> to <field>.
    2885         gs_fc = gs_mfc12.
    2886       else.
    2887         assign <fs12> to <field>.
    2888         gs_fc = gs_sfc12.
    2889       endif.
    2890     when 013.
    2891       if gs_out_flags-slave ne 'X'.
    2892         assign <fm13> to <field>.
    2893         gs_fc = gs_mfc13.
    2894       else.
    2895         assign <fs13> to <field>.
    2896         gs_fc = gs_sfc13.
    2897       endif.
    2898     when 014.
    2899       if gs_out_flags-slave ne 'X'.

    Hi,
    this error occurs when you try to address a field-symbol before it has been assigned to a field or
    the assignment has failed.
    Use following code to remove this dump
    Assign <mara-matnr> to <fs>.
    if sy-subrc <> 0.
      Error Message.
    Endif.
    Hope it helps,
    Raj

  • Error While saving a iBot

    Hi All ,
    I am getting the below error while saving a iBot.
    Oracle BI Scheduler Error: [nQSError: 16001] ODBC error state: S1C00 code: 106 message: [Microsoft][ODBC Excel Driver]Optional feature not implemented . at stage of execute transaction command with data source: Procurement_Demo
    I am using xls as a datasource to create Repository. I have created scheduler tables for iBot in the same datasource.
    Can i not use XLS as a datasource for iBot?
    If i can use , what is the solution of this problem.
    Thanks in advance.
    -- Ashish

    Hi Vivek,
    Please close your SharePoint Designer application, clear/delete the cached files and folders under the following directories from your server installed SharePoint Designer, then check results again.
    <user profile>\appdata\roaming\microsoft\SharePoint Designer\ProxyAssemblyCache
    <user profile>\appdata\local\microsoft\websitecache\<sitename>
    http://www.andreasthumfart.com/2013/08/sharepoint-designer-2013-server-side-activities-have-been-updated/
    Thanks
    We are trying to better understand customer views on social support experience, so your participation in this
    interview project would be greatly appreciated if you have time.
    Thanks for helping make community forums a great place.

  • Error while Saving the report

    Hi,
    i have created some reports which are working fine,
    but now i am facing some errors while saving the files.
    Also the reports does show only one record while there are many records in the database.
    The error messages are as follows:
    REP-1051; Unable to save document to file ' F:\Database\Reports\report1.rdf '.
    REP-1070: Error while opening or saving a document.
    Please help me to find out the exact problem.
    Also tell me how can i show all the pages of Database records in a report( while one record on each page)

    As for the error while saving, you have only one possible thing to try. It it doesn't work, you're sunk.
    Assuming the report was not being newly created, i.e. that it was opened from a file on your system, then rename that file to something else (Report_001_OLD.rdf, for example). Then try to save it - Reports will think it is a new file to be saved rather than an existing file to be updated.
    Again, if that doesn't work, and if you do not have the auto-save option turned on, then you're sunk. You will have just lost all of the work you've put into that report.
    As you'll discover, Reports is not the most robust application ever written.

  • Error while saving a Entry through view cluster ( getting TK 319 message)

    We are  facing an issue while saving the entry in one of the view at the lowest level of the three level View cluster.
    Please find the Details of view Cluster below.
    1)First level- Key  => MANDT( CLNT, 3) + RULE_ID( CHAR , 20) .
    2)Second level-Key =>MANDT( CLNT, 3) + RULE_ID( CHAR , 20) + LOCATION_TYPE (CHAR , 20) + START_DATE( DATS ,8).
    3)Third level (Lowest level  )-key => MANDT( CLNT, 3) + RULE_ID( CHAR , 20) + LOCATION_TYPE (CHAR , 20) + MEAL_RULE_TYPE( INT1 ,3) +  START_DATE( DATS ,8) .
    we are not able to save the Entry at the Third level  and is getting the  Message "Fill table key for table ITC_CALCRULE_ML only up to position 044 only " .
    As per our understanding problem is that " the transport interface is called with a incorrect object key for table ITC_CALCRULE_ML  "  . we thaught of either reduce the width of the key or if we want
    to define also  the date, by  changing the order of MEAL_RULE_TYPE and START_DATE .Also we could use a CHAR1 instead of the INT1 for the MEAL_RULE_TYPE.
    After analyzing  this  we came to a conclusion that we have two solutions for solving it.
    1) Database Design Change : Which is generally not preferable.
    2) Apply the Event  12  ( After changing the key entries for the change task (E071K) ) on the view and in its code we reduce the Object key width for the Transport Organizer  and
        would be able to save the entry in the database  and would be able to transport the entries to our Q-system.

    Hi. Were you able to fix the error?

  • While saving a file, I have converted all my files to Pdf.  The only way to restore previous is to delete Adobe.  Does anyone have a soution?

    While saving a file, I have converted all my files to Pdf.  This made everything inaccessible, even Explorer.  I had to delete Adobe to get back to some of the previous files.  I tried to restore system to previous, but I kept getting a pop up message that said I did not have enough shadow space.  Does anyone have a solution?  Greatly appreciate your help.

    Application, file icons change to Acrobat/Reader icon

  • Error while saving the Sales Order

    Hi experts,
        i am getting a runtime error while saving a sales order stating: SAPSQL_EMPTY_TABNAME. It says the field T681-KOTAB could be empty. I would give in more inputs. Someone plz help.
    Thanks.

    I would expect that KOTN521 would be a Database table defined in the ABAP Dictionary that relates to the condition implemented in 521 for the usage specified in that record.
    You should be able to go into the info system, SE84, and search under ABAP Dictionary / Database Tables to see what KOTN521 is.
    Also, since the only Keys to T681 are KVEWE and KOTABNR, and there are two KOTABNR entries with a value of 521, then there must be two different usages (KVEWE) associated with that table.
    If you see what they are, you can check to see what the usages represent.   Based on a lookup, it appears that a usage of N is for Free Goods, A is for Pricing etc.   In our system, we only have A entries.
    What are the usages for the 521 entries?  Do they relate to Free Goods/Pricing???
    Does the table KOTN521 exist in the ABAP Dictionary?
    Answering these questions may get you closer to the answer.
    Can you compare the values in these entries to what you have in different SIDs?
    Is this problem happening in Production, or is it still in a development or Quality Assurance client?
    If it is still in development or Q, then it may be that a recent customization change was made.
    Compare the entries across your systems, if possible.
    Good luck
    Brian

  • Error while saving FYV : Gaps in financial year variant periods

    Hello Experts,
    We are getting an error while saving  a new FYV as:
    Gaps in financial year variant periods XY
    Message no. FGV556
    Diagnosis
    The period specification has gaps. The periods must be sequentially numbered without any gaps.
    System Response
    Only a correctly defined period assignment can be saved.
    Procedure
    Define the periods with consecutive numbers.
    Details: The new FYV has 52/53 weeks as posting periods depending on calendar year.
    For example, we are trying to define Fisc 2009 as follows. (Fiscal year 2009 = Nov 01 2008 to Oct 31 2009).
    Month-Day-Period-Yearshift
    11     ---     7     ---     1     ---     +1
    11     ---     14     ---     2     ---     +1
    11     ---     21     ---     3     ---     +1
    11     ---     28     ---     4     ---     +1
    12     ---     5     ---     5     ---     +1
    12     ---     12     ---     6     ---     +1
    12     ---     19     ---     7     ---     +1
    12     ---     26     ---     8     ---     +1
    12     ---     31     ---     9     ---     +1
    1     ---     3     ---     9     ---     0
    1     ---     10     ---     10     ---     0
    1     ---     17     ---     11     ---     0
    1     ---     24     ---     12     ---     0
    1     ---     31     ---     13     ---     0
    2     ---     7     ---     14     ---     0
    2     ---     14     ---     15     ---     0
    2     ---     21     ---     16     ---     0
    2     ---     28     ---     17     ---     0
    3     ---     7     ---     18     ---     0
    3     ---     14     ---     19     ---     0
    3     ---     21     ---     20     ---     0
    3     ---     28     ---     21     ---     0
    4     ---     4     ---     22     ---     0
    4     ---     11     ---     23     ---     0
    4     ---     18     ---     24     ---     0
    4     ---     25     ---     25     ---     0
    4     ---     2     ---     26     ---     0
    5     ---     9     ---     27     ---     0
    5     ---     16     ---     28     ---     0
    5     ---     23     ---     29     ---     0
    5     ---     30     ---     30     ---     0
    6     ---     6     ---     31     ---     0
    6     ---     13     ---     32     ---     0
    6     ---     20     ---     33     ---     0
    6     ---     27     ---     34     ---     0
    7     ---     4     ---     35     ---     0
    7     ---     11     ---     36     ---     0
    7     ---     18     ---     37     ---     0
    7     ---     25     ---     38     ---     0
    8     ---     1     ---     39     ---     0
    8     ---     8     ---     40     ---     0
    8     ---     15     ---     41     ---     0
    8     ---     22     ---     42     ---     0
    8     ---     29     ---     43     ---     0
    9     ---     5     ---     44     ---     0
    9     ---     12     ---     45     ---     0
    9     ---     19     ---     46     ---     0
    9     ---     26     ---     47     ---     0
    10     ---     3     ---     48     ---     0
    10     ---     10     ---     49     ---     0
    10     ---     17     ---     50     ---     0
    10     ---     24     ---     51     ---     0
    10     ---     31     ---     52     ---     0
    The above entries cover all the dates in calendar year 2009, that is, Jan 2009 to Oct 2009  is covered by periods 10 to 52 and Nov 01 2009 to Dec 31 2009 is covered by period 1 to 9 of the following fiscal year 2010.
    Inspite of making sure that all the days of 2009 are covered by periods 1 to 52. We are still unable to save the FYV.
    Please help!
    Susan

    Hello, I am getting this error while saving the FSV. My FSV is based on Weeks. Below is what I am inputting for this. Other details are Calender Year -  2017, No. of posting periods - 53, checked year dependent. Also, I have FSV for previous years also where weeks are 52 but configured as 53. So, hope that this is not creating this issue. Solicit your early response.
    Month
    Day
    Period
    Year Shift
    1
    7
    1
    0
    1
    14
    2
    0
    1
    21
    3
    0
    1
    28
    4
    0
    2
    4
    5
    0
    2
    11
    6
    0
    2
    18
    7
    0
    2
    25
    8
    0
    3
    4
    9
    0
    3
    11
    10
    0
    3
    18
    11
    0
    3
    25
    12
    0
    4
    1
    13
    0
    4
    8
    14
    0
    4
    15
    15
    0
    4
    22
    16
    0
    4
    29
    17
    0
    5
    6
    18
    0
    5
    13
    19
    0
    5
    20
    20
    0
    5
    27
    21
    0
    6
    3
    22
    0
    6
    10
    23
    0
    6
    17
    24
    0
    6
    24
    25
    0
    7
    1
    26
    0
    7
    8
    27
    0
    7
    15
    28
    0
    7
    22
    29
    0
    7
    29
    30
    0
    8
    5
    31
    0
    8
    12
    32
    0
    8
    19
    33
    0
    8
    26
    34
    0
    9
    2
    35
    0
    9
    9
    36
    0
    9
    16
    37
    0
    9
    23
    38
    0
    9
    30
    39
    0
    10
    7
    40
    0
    10
    14
    41
    0
    10
    21
    42
    0
    10
    28
    43
    0
    11
    4
    44
    0
    11
    11
    45
    0
    11
    18
    46
    0
    11
    25
    47
    0
    12
    2
    48
    0
    12
    9
    49
    0
    12
    16
    50
    0
    12
    23
    51
    0
    12
    30
    52
    0
    12
    31
    1
    +1
    Thanks
    Deepankar

  • Error while saving project in cProjects

    Hello,
    I am getting following error while saving a project in cProjects-
    Access via 'NULL' object reference not possible.
    Details of the error are given below-
    Can somebody please help me resolve this error?
    Thanks and regards,
    Milind Dumbre
    Error analysis
         An exception occurred that is explained in detail below.
         The exception, which is assigned to class 'CX_SY_REF_IS_INITIAL', was not
          caught in    procedure "FINALIZE_OBJECT_BEFORE_SAVE" "(METHOD)", nor was it propagated by a
         RAISING clause.
        Since the caller of the procedure could not have anticipated that the
        exception would occur, the current program is terminated.
        The reason for the exception is:
        You attempted to use a 'NULL' object reference (points to 'nothing')
        access a component (variable: "LR_CALC").
        An object reference must point to an object (an instance of a class)
        before it can be used to access components.
        Either the reference was never set or it was set to 'NULL' using the
        CLEAR statement.

    Hi Milind,
    You may check the settings by navigating to the following path
    IMG --> Collaboration Projects --> Connection to external systems --> Accounting Integration
    -->  Define Object Links for Accounting Integration.
    Check if the RFC destination has been correctly maintained. You may check the correctness of the RFC settings via SM59.
    Let me know if  this helps.
    Regards,
    Vivek Pandey

  • Error while saving after changing the date of a parked invoice document in MIR7

    DUPREC:POS&INCOMINGINVOICE&(Invoice Number)(Fiscal Year)
    Message no. CD328

    Hi,
    Hope you are getting the dump Please check this note 1687903 - MIR4: Dump while saving parked invoice
    also check the dump at ST21 for the ABAP statement whare it is getting an issue and rectify the same .
    Regards,

  • Error message while saving a sales order "Product 10069995 does not have sc

    hi Friends,
    i am creating an order , enter the material,quantity, batch , correct price everything etc etc. while saving the order it gives an error message "Product 10069995 does not have schedules assigned"

    Hi Suman
    Use transaction code OMJJ and check the "Allowed Transactions" for customizing movement types.
    Kalpesh

  • Error While Saving Mapping For A Dimension

    I am getting The Error While Saving The mapping For a Dimension
    Any Clue?
    An error occurred creating DimensionMapGroup BROKERS.MAPGROUP1.DIMENSIONMAPGROUP : ***Error Occured in
    DELETE_MAPPING_GROUP: Analytic workspace object __XML_STARTUP_CALCMMBRS does
    not exist.
    Thanks
    Raghu

    Check the OSS note 550760 regarding the issue.

  • Could someone help me with a Runtime Error while saving a PDF file?

    While saving a 28 page PDF file in Illustrator today, I got a window saying, "This application has requested the "Runtime" to terminate it in a unusual way." It said to contact the applications support team for more information. I keep getting the same thing each time I try it. Does anyone know how to fix this issue or how I contact the applications support team ?
    Thank you for any insight.
    Pam

    It is a 13.5x11 inch calendar. There are 14 pages with images on them and
    some text. The other pages have text, a grid and a colored background with a
    gaussian blur. I saved each page as an "outline".
    The printer I am using requested I save all pages in a pdf file. I was
    successful in saving all but about six pages, now I can't even open the
    file.
    What happens is... I open Illustrator
                                   I open the pdf file
                                   A window appears that says... Runtime Error,
    This application has requested the Runtime to terminate it in an unusual
    way. Please contact the application's support team for more information.
                                   I select ok
                                   then a window appears that says... Adobe
    Illustrator CS5 has stopped working. A problem caused the program to stop
    working correctly. Windows will close the program and notify you if a
    solution is available.
                                   Then the program closes.
    So far I have not been notified of anything.
    Please let me know if you need more details.
    Thank you so much for helping me with this.
    Pam

  • FRM-92010 Error while saving a form in HRMS

    Hi,
    I created a new 12.1.1 instance and impletented HRMS as per doc id#145837.1.
    Applied patch 8934107, Ran DataInstall and hrglobal.drv.
    Now while saving the forms we are getting the following error: (in application.log)
    10/05/13 18:12:03.269 formsweb: Forms session <1> aborted: unable to communicate with runtime process.
    10/05/13 18:12:03.270 formsweb: Forms session <1> exception stack trace:
    java.io.IOException: FRM-93000: Unexpected internal error.
    Details : No HTTP headers received from runform
    at oracle.forms.servlet.ListenerServlet.forwardResponseFromRunform(Unknown Source)
    at oracle.forms.servlet.ListenerServlet.doPost(Unknown Source)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:763)
    at javax.servlet.http.HttpServlet.service(HttpServlet.java:856)
    at com.evermind[Oracle Containers for J2EE 10g (10.1.3.4.0) ].server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:713)
    at com.evermind[Oracle Containers for J2EE 10g (10.1.3.4.0) ].server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:370)
    at com.evermind[Oracle Containers for J2EE 10g (10.1.3.4.0) ].server.http.HttpRequestHandler.doProcessRequest(HttpRequestHandler.java:871)
    at com.evermind[Oracle Containers for J2EE 10g (10.1.3.4.0) ].server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:453)
    at com.evermind[Oracle Containers for J2EE 10g (10.1.3.4.0) ].server.http.AJPRequestHandler.run(AJPRequestHandler.java:313)
    at com.evermind[Oracle Containers for J2EE 10g (10.1.3.4.0) ].server.http.AJPRequestHandler.run(AJPRequestHandler.java:199)
    at oracle.oc4j.network.ServerSocketReadHandler$SafeRunnable.run(ServerSocketReadHandler.java:260)
    at com.evermind[Oracle Containers for J2EE 10g (10.1.3.4.0) ].util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:303)
    at java.lang.Thread.run(Thread.java:619)
    I have also applied patch 8682249 as per doc 867501.1 (since error was the same) but still no luck.
    Please help.
    Regards,
    Neeraj
    Edited by: user556153 on May 13, 2010 6:19 AM

    Hi;
    Did you checked
    Queries Error With FRM-92101 In Many NLS Forms [ID 443922.1] << seems similar error like yours
    Forms FRM-92050, FRM-92100, FRM-92101, FRM-92102 Reference Guide [ID 444690.1]
    If its not help please enable trace
    How To Perform System Tracing For All Forms Runtime Processes? [ID 400144.1]
    Regard
    Helios

Maybe you are looking for