While saving the Ai file its taking much time

I am using windows 7 and Ai CC, when i am working on files while saving the Ai file its taking much time. I got 4 GB RAM. now i got better system too with ram of 6GB. stillthe Ai is taking much time to save 300 MB file.

Thank you Jdanek.
1. I am saving the file in my local HDD only.
2. Scratch disk is F Drive [100 GB free space], there no data is stored.
3. Even i increased the Virtual memory too.
4. Now I switched off the "Save with PDF compatability" too,  No luck!

Similar Messages

  • Problem while publishing the models - it is taking much time

    Hi,
    I am facing one issue while publishing the models.Previously when Re-publishing the models in Configurator processing pending publications usually took 3 to 5 minutes per model. Currently it is taking 15-20 minutes per model to process. Please suggest me the possiblities to identify the root cause of the issue.
    Thanks in advance.
    Regards,
    Purushoth

    You'll probably want to gather a trace for the Process a Single Publication concurrent request. You can turn this on by selecting ' enable trace' on the program definition. You'll need your dba to review the trace to identify which parts of the program are taking the longest.
    If you haven't run CZ Purge for awhile, try running it. Also find out how often stats are gathered for the CZ schema.
    Thanks,
    Jason

  • Can't create a new illustration. Problems occurred while saving the print file.

    I can't open a new Illustrator file. It sends me this error: Can't create a new illustration. Problems occurred while saving the print file. ID:-1
    I opened a previous document created in CC, but it will not allow me to copy and paste items from one doc to another.
    I have rebooted with no avail.
    System:
    Adobe Creative Cloud CC
    Mac Book Pro 2012
    2.6 GHz Intel Core i7
    8 GB 1600 MHz DDR3

    Is a printer connected? Is it turned ON? Is the driver up to date?
    Illustrator checks this every time and also writes information on the printer into the file.

  • Adobe X pro 10.0.0 stop responding while saving the pdf file as word

    Adobe X pro 10.0.0 stop responding while saving the pdf file as word, i chose file>save as>microsoft word>Word Document.
    I tried to install on the X pro on another machine and tried to convert also the same issue.
    Any help? please advice

    I suggest you bring Acrobat up to 10.1.2 by appltying the most recent maintenance.
    Ken Friedman

  • SPD "The server could not complete your request" while "Saving the XOML file"

    Greetz!
    I'm trying to resolve an issue where a SharePoint Designer Approval workflow on a list fails while "Saving the XOML file". The workflow has been reduced to a single step for tests and it still fails.The more details dialog is empty.
    The Event Viewer does not record the event and no unexpected events show up in the logs.
    Any ideas on what might be causing this?
    Thanks!
    Love them all...regardless. - Buddha

    Hello Kansas,
      Did you ever get a solution for your publishing issue. I have been seeing the same problem and I am reading blogs that is pointing to a Feburary 2011 CU as the possible solution. http://support.microsoft.com/kb/2557533

  • An error occurred while saving the following file

    I want to build an app but I get this message:
    An error occurred while saving the following file:
    C:\Acquire U6 DS&FTP\Acquire U6 DS&FTP.vi
    Nothing more, absolutely nothing more.
    Before that I could build it without problems, now I can't. The file in the message is the main file (by the way it runs fine). I've tried creting a new project but it doesn't work.
    I really hope somebody can help me.
    Thanks,
    JuanM

    What's changed in your code?  Have you tried undoing anything or reverting back to a pervious version?
    Reese, (former CLAD, future CLD)
    Some people call me the Space Cowboy!
    Some call me the gangster of love.
    Some people call me MoReese!
    ...I'm right here baby, right here, right here, right here at home

  • LOV is slow after selecting a value its taking much time to default

    Hi,
    I have a dependent LOV. Master LOV is executing fine and its populatin into the field fastly. But Child LOV is very slow after selecting a value its taking much time to default.
    Can any one please help me if there is any way to default the value fast after selecting a value?
    Thanks,
    Mahesh

    Hi Gyan,
    Same issues in TST and PROD instances.
    In my search criteria if i get 1 record, even after selecting that value its taking much time to default that value into the field.
    Please advice. Thanks for your quick resp.
    Thanks,
    Mahesh

  • Error while saving the excel file

    hai all,
    i had an requirement to upload customer master data through lsmw while saving the data in excel file with extension as) text( tab delimeted)(.txt) it is not saving and displaying the message as " the selected file type doesnot support workbooks that contain multiple sheets. to save only the active sheet click ok."
    regards,
    karthik

    Ensure that you have not opened any excel file or text file with similar name.
    thanks
    G. Lakshmipathi

  • How to get the filename specified by user while saving the download file?

    Is there any way? Your reply is highly appreciated.
    By [email protected]

    download the library cos.jar from http://www.servlets.com/cos/index.html
    documentation on how to use it is included in the jar
    :)

  • Request for the reasons of Query taking much time

    Hi,
    I have one SQL query.When i execute that query from TOAD it is taking some 120 sec,but the same query when i execute from Forms(Front End) it is taking nearly 5 mints.I don't understand where the problem is.Can any one please help me on this with the resons & solutions(Steps to the overcome).
    Regards,
    Rao.

    Can you do an explain plan of the query in Toad?
    And a sql_trace of the form when it executes the query?
    If you have dba-rights you can enable sql-trace in the forms session by using:
    dbms_system.set_sql_trace_in_session(..sid.., ..serial#.., true);where sid and serial# are the values of the forms session (can be found in v$session).
    Toon

  • Taking much time when trying to Drill a characterstic in the BW Report.

    Hi All,
    When we are executing the BW report, it is taking nearly 1 to 2 mins then when we are trying to drill down a characterstic it is taking much time nearly 30 mins to 1 hour and througing an error message that,
    "An error has occared during loading. Plese look in the upper frame for further information."
    I have executed this query in RSRT and cheked the query properties,
    this quey is bringing the data directly form Aggregates but some chares are not avalable in the Agrregtes.
    So... after execution when we are trying to drill down the chars is taking much time for chars which are not avilable in the Aggregates. For other chars which are avilable in the Aggregates it is taking only 2 to 3 mins only.
    How to do the drill down for the chars which are not avilable in the Aggregates with out taking much time and error.
    Could you kindly give any solution for this.
    Thanks & Regards,
    Raju. E

    Hi,
    The only solution is to include all the char used in the report in the aggregates or this will the issue you will face.
    just create a proposal for aggregates before creating any new aggregates as it will give you the idea which one is most used.
    Also you should make sure that all the navigation characteristics are part of the aggregates.
    Thanks
    Ajeet

  • Discoverer report is taking much time to open

    Hi
    All the discoverer report are taking much time to open,even query in lov is taking 20 -25 min.s.We have restart the services but on result found.
    Please suggest what can be done ,my application is on 12.0.6.
    Regards

    This topic was discussed many times in the forum before, please see old threads for details and for the docs you need to refer to -- https://forums.oracle.com/forums/search.jspa?threadID=&q=Discoverer+AND+Slow&objID=c3&dateRange=all&userID=&numResults=15&rankBy=10001
    Thanks,
    Hussein

  • Error while saving the FM8 XML file

    Hello,
    While saving the FM8 XML file, an error message appears (see attached screen shot).
    Is there a solution to resolve this issue? Please suggest.

    Hi,
    This type of error is non-descript and could be caused by any number of things. It is impossible to troubleshoot from here based solely on that message. Let me ask a couple of questions, though:
    - Are you using structured FrameMaker? If so, are you using a structured app that has worked successfully before? In other words, did this just suddenly start happening to an otherwise-stable process?
    - Is there anything unusual about your layout; that is, anything other than a single text flow with graphics?
    Russ

  • Is it possible when saving the psd file to have an automatic jpg file saved at the same time?

    My work involves preparing images for printing lightboxes and window installations.  My clients require to pre-approve the photos before printing.
    I usually save my files as psd but since the files are very large in this format I usually save another copy as a jpg file that has a much smaller file size.  This makes it possible for me to add these to a presentation and and send them to my client.
    Is it possible when saving the psd file to have an automatic jpg file saved at the same time?  Or do I still have to do this manually?

    If you save the document manually as a PSD file in Phtoshop not from within an Action, Script, Plugin or Droplette.  You may be able to write a Photoshop that would do as save as Jpeg,  And you should be able trigger its execution by setting up a Script Save event using the Script event manager.  When You do a manual save  the script should be triggered.  I wrote may be able to for I have never tried to write that script or set up a Script Manager Save event.  I have only use open events.

  • Error while Saving the report

    Hi,
    i have created some reports which are working fine,
    but now i am facing some errors while saving the files.
    Also the reports does show only one record while there are many records in the database.
    The error messages are as follows:
    REP-1051; Unable to save document to file ' F:\Database\Reports\report1.rdf '.
    REP-1070: Error while opening or saving a document.
    Please help me to find out the exact problem.
    Also tell me how can i show all the pages of Database records in a report( while one record on each page)

    As for the error while saving, you have only one possible thing to try. It it doesn't work, you're sunk.
    Assuming the report was not being newly created, i.e. that it was opened from a file on your system, then rename that file to something else (Report_001_OLD.rdf, for example). Then try to save it - Reports will think it is a new file to be saved rather than an existing file to be updated.
    Again, if that doesn't work, and if you do not have the auto-save option turned on, then you're sunk. You will have just lost all of the work you've put into that report.
    As you'll discover, Reports is not the most robust application ever written.

Maybe you are looking for