While Savings Sales Order, I am getting error as

Plant 1000, not assigned to sales area
i chked in S0-DC for plant is OK, WHR S THE PROBLEM

Hi
In the customization assign the plant to Assign sales organization - distribution channel - plant
IMG>>>>>Enterprise Structure>>.Assignment>>>>>Sales and Distribution>>>>Assign sales organization - distribution channel - plant
regards

Similar Messages

While creating sales order I am getting Sanctioned party list blocked but I am able to create delivery, and PGI

Dear GTS Experts,
While creating sales order I am getting Sanctioned party list blocked, but I am able to create delivery, and PGI.
Where Is the wrong ?
Thanks a lot
Venu gopal

Dear Venu
Based on your message shown in the system, can you check the field in Control Settings for System Reaction in the Document type settings via Application Levels in the feeder system. This Field '' System Response in Feeder system if SAP GTS fails'' should be maintained with ''A''. I think in your case it could be 'Blank'' Thats why the system is allowing you to create the subsequent documents accordingly.
Please let me know if any further inputs required.

While creating Sales order in Va01 runtime error

Hi friends,
While i am creating sales order in VA01 i am getting runtime error
Thanks in advance
venuprasad

This could be due to some recent code changes in SAPMV45A...may be some user exits...
The Dump which is obtained can be analysed by an ABAP person and could lead you tot he right issue.
Hope this helps
Regards
Biju

Error received while changing sales order.

Hi All,
while changing sales order we have received error message "An internal program error has occured.See note 44283".
So could you plesae explain me what needs to be done.
Thanks in advance.

To avoid to store inconsistent data in the future, activate the following method of the BADI                           BADI_SD_SALES:
> 1 - Transaction SE18
> 2 - Definition name: BADI_SD_SALES Menu: Implementation -> Overview double-click on implementation: IM_CORE_CHECK
> 3 - Now you will get an overview on the methods and you see also that the implementation IM_CORE_CHECK is inactive
> 4 - Press the change button and activate
This check works in the following way:
> 1 - if the number of items is less than 10 and there is an inconsistency the system will not store the data and an A-message will occur.
> 2 - If the number of items is greater than 10 and less than 50 and there is an inconsistency the data will be stored and an I-message will occur.
> 3 - if the number of items is greater than 50 there is no check because performance.
Edited by: Gerard Magorrian on Aug 6, 2010 4:01 PM

Getting runtime error while doing sales order

Hi,
I am getting a runtime error while doing sales order.
Error : SAPSQL_INVALID_FIELDNAME
Kindly suggets....stuck up badly.
cant do any transaction.
Regards
Kishan

Hello,
Check OSS Note#209847 and 310304
Regards,
Gauravjit.
Reward points if the notes are helpful

Getting error in while changing sales order which is created using BAPI

Hi All,
   I have created the sales order using BAPI ( BAPI_SALESORDER_CREATEFROMDAT1 ) and i am successfully creating sales order using this BAPI. But while i want to change sales order iam changing Shipping Conditions in Header Data of sales order .its giving an error .can any know any thing about this.
Error mesage :    No status object is available for SDI 300082407/10    (Order Number/Item Number)
In Header i am passing these values ...
     wa_order_header_in-doc_type = vbak-auart.
    wa_order_header_in-sales_org = vbak-vkorg.
    wa_order_header_in-distr_chan = vbak-vtweg.
    wa_order_header_in-division = vbak-spart.
Do i required to pass the below values ? in Header structure ( BAPISDHEAD1 ).
REFOBJECTTYPE
REFOBJECTKEY
REFDOCTYPE
Regards,
Sudhakar Reddy A

rectified

Error determining posting period(infostructure S008,Variant Z2,RC3) while creating Sales orders from Inbound IDOCS

Hello,
I am getting this Error message"error determining posting period(infostructure S008,Variant Z2,RC3)" while creating Sales order from Inbound Idocs in the IDOC,which is affecting sales order creation.
While viewing this Info structure S008, I could see no records have been maintained. Wanted to know the reasons behind this Hard error?
Is it something related to Date Field used in the Update Rules for this Infostructure which is causing this posting period error?
Appreciate your inputs on this.
Thanks and Regards
Mohammed Roshan

Thank you Jelena,I checked the Ship. Delivery dates in the IDOC which are for Current Fiscal Year- 20140703 and 20140711,Could there be any other reason for this error?
Could it be an issue with e Update rule in this Infostructire S008
Secondly when we try change the update rule thru MC25 for this Infostructure S008,It gives a message"
"Maintenance of SAP standard updates not allowed"
Kindly advice
Thanks and Regards
Mohammed Roshan

Error while creating sales order : Materail not listed !!!

Dear All,
While creating a Sales Order, I am getting this message. please let me know. what is listing means.
How to check it.
error message
Material XYYXY is not listed and therefore not allowed
Message no. V1118
Diagnosis
The material entered is not allowed for the transaction because the listing is missing.
Procedure
Check your entries. If they are correct, check whether the listing is complete.
end of errror message.
Thank You.
Regards
Venkat.
Will award points for useful replies.

Hi,
Hope this will make your fundamentals about listing clearer.
Material listing (and exclusion) lets you control which materials specific customers may (or may not) buy. For example, if you create a material listing for a specific customer, the customer can only order products from that list. You can also create a master record for material exclusion for a particular customer. Then the customer can not order excluded materials from you.
Material listing applies to two partner functions in Sales & Distribution: the sold-to party and the payer.
In the standard version of the SAP System, when the sold-to party and payer are different, the material listing check is as follows:
· If the sold-to party has a material listing, the system only checks this listing (no other check takes place).
If there is no listing for the sold-to party, but a listing has been created for the payer, the system automatically checks the payers listing.
· If no material listing data exists for either the sold-to party or payer, then the customer may order any material.
Regards
SD

Error while processing sales order as factory calendar missing.

"factory calendar missing or error in factory calendar".iam getting this error while processing sales order even though i have assigned it to shipping point and plant and sales org.

Hi Malik, How are you? I'm sorry to trouble you,
Let me introduce, I'm Daniel, and I saw your fantastic asnwer in
the topic "How to update Factory Calendar in SRM", and might I have the same
problem. It's with the "factory calendar".
In transaction va02 when I choose a Delivery Date, and I sent it to process, as
a result in the "shipping tab" it calculated to the first item one date, and to
the rest one date different. I don't know What it happen?
I debugged the program and I saw that to the first item use to calculate the
date is the function 'APO_SCHEDULING', and to the rest item use
'SD_SCHEDULING', and until here I come.
How can I do to what the dates calculated are the same? or What would be the
problem?
I need the dates calculated are equal.
I looked at it's using two "factory calendar" which are "J4" and "C2". Is this
correct?
Thanks In Advance,
My best regards,

Hi error while creating sales order

hi
i am getting 'not able to save' message while i am creating sales order.
how should i proceed to know where is the problem???
i tried debugging but it is taking lots of time, is there any other way i can know the reason for this error in standard code.
there is no wrong data entry while creating sales order.
i just want to know what are the ways to know where is the problem in the standard code.
thanx
rocky

hi ,
try too create a sales order after that check transaction code ST22 U WILL FIND AN SHORT DUMP then check in the source code extract an pointer will be visible where the error is coming and it will also show the program name , please read the dump analysis care fully
srinivas

While saving sales order, deleted item resulting in error

Dear All
I am facing an issue while changing Sales Orders.
I have set a check in a user exit that if batch is empty, display an error message. I add try to add a new line item which doesnt have batch. When i try to save, i get a message which is fine.
But when I delete this line item and try to save again, I am still getting message. I am not sure how this is happening.
Kindly advice.
Regards
Dinesh

There's a field EKPO-LOEKZ (Deletion Indicator in Purchasing Document) for PO, but there's no such field for an SO as per my knowledge. So the only option left to you is to debug the your user-exit while saving the SO and check why its still triggering the error message. May be you can add another condition stating that the line item should have atleast material number filled, in that case if the material number is there and batch is missing, it will show an error msg.
Regards,
Raman.

Statistics Currency Error while posting Sales Order (No: V1453)

Hi Sappers,
I am in process of making a company in SAP ERP SD - IDES, and while posting Sales Order, after I input Sold to Party, PO no, Del Plant and Incoterms and I press ENTER: The error comes up as:
Statistics: The currency from in INR for date 25.11.2011 could not be determined.
Kindly suggest a possible solution.
Thanks
Rahul Tikku

Hi,
Just go to "OBD2", select the Accounts group of your customer and "Double Click" on it, then "Double cliick" on "Sales Data" > Further goto, "Sales" and check if "Currency" field is suppressed. if so then change it to required or optional Entry. save and update you customer master in XD02. Then try your process.
Reagrds
DSR

Error occurd while creating sales order, plz help

while i am creating a sales order, i got a error like this, version 0 is not defined for the fiscal year 2008. when i press error msg it shows like this The version 0 is not defined in controlling area 1000 for the fiscal year 2008.
You have to maintain the fiscal year-dependent version parameters for all actual versions for which multiple valuation is updated.
System Response
The version 0 cannot be used for fiscal year 2008.
Procedure
Maintain the fiscal year-dependent version parameters for the version 0.
Execute function

Hi
Maintaining Versions
Transactioncode
SPRO
Choose SAP Reference IMG.
Choose Controlling -> General Controlling -> Organization.
Choose for Maintain Versions.
http://help.sap.com/saphelp_46c/helpdata/en/03/fb58b00d9611d3b65e0000e82d962e/content.htm
Regards
Jitesh Mehta

Error while creating sales order

while creating sales order for a particular plant there is error coming
NO NUMBER RANGE FOR DOC TYPE ZOS1VXBAK-AUARTSILD
PLANTXVBAK-VKBUR.
Intailly I have check the no series we have internal no series for all plant,the
number series which start 195000001, only one plant the giving the above error, rest all plant it is as applicable above series.
kindly guide me for the same.

Hi Sanjay
This is regarding number ranges defining and assigning tips which you can follow as below:
Whenever there is a new Sales Org being created, you will be required to maintain Number Ranges for Sales Documents which are allowed for your New Sales Area.
Number Ranges can be maintained Internally by the system, however it can be maintained externally also if you customize it accordingly.
In Standard SAP the Transaction code for Maintaiing Number ranges externally is VN01.
Defining - The same can be reached through in IMG as : Sales & Distribution>Sales>Sales Document Header-->Define Number Ranges for Sales Documents.
Here you provide the system a specific Number range as follows:
Number range Key Start Number range End Number Range+Current Number
For Example: If you want to propose the following Number Range
*1 9000076000 9000076999 0
The Current Number field will be kept zero as you are proposing new number range and no sales documents have been created on it , Obviously..
*1 is a Unique Two digit Alphanumeric Key, while proposing your key, you should ensure that it should not be there in the system as existing.
If you propose a key that is there in the system or if the Number Range (Start and End Series) is there in the system already, the system will throw a message that Interval already already exists. So choose a key that is unique, and which is not there in the system.
Here , by making this , you are assigning a Key to a Number Range Series.
All the symbols can be used along with numbers from 0 to 9 and Alphabets from A to Z and in any order. For example: !1, ^A, BB,Z*,M2.........
Assigning - In Assigning, you assign the particular Sales Document to the Number Range you have already proposed as above.
The Assigning Part is done as follows:
The Two digit Alpha Numeric Key is maintained or Assigned to the respective Sales Document type in V0V8.
This can also be reached in IMG by:
Sales & Distribution>Sales>Sales Document Header-->Define Sales Document Types
Locate the particular Sales Doc Type, and double click on it to display it configuration. Here you put the Two Digit Number key in the Field- "Number range External Assignment"
Besides this:
If a new Shipping Point is created then Delivery Number ranges are required to be maintained.
Similarly,
If a new Plant is created then Billing Number Ranges are required to be maintained.
Regards
Naren

Error while raising sales order

Hi all,
I have created a make-to-order material with item category group and general item cetegory group 0001.
While raising sales order for that material (make-to-order) item category TAK.
I got a error stating that plant is not assigned to controlling area.
can anyone help me out in this regards.

hi pavan,
pl check this on settlement rule :
The settlement rule consists of the sender and the settlement distribution rule which includes the settlement receiving accounts, distribution factor, settlement type, and validity period. You can change the settlement rule manually.
There are two possibilities for settling sales orders. You can either:
Settle to a business segment
In this case, the settlement rule is determined automatically. You can only use this method of settlement if CO-PA is activated.
Settle to a general ledger account
In this case, you enter the settlement rule and the general ledger account number manually in the sales order.
To change the settlement rule, choose Edit ® Settlement rule.
For more detailed information about settlements and especially about processing settlement rules, see the CO Cost Object Controlling documentation.
Please consult your FI guy so that he can help you configure a settlement profile.
regards
sadhu kishore

While Savings Sales Order, I am getting error as

Similar Messages

Maybe you are looking for