While searching for a photo, my Mac went into endless loop, so had to shut it down using button. After restart, highlightrd text looked "different." Also unable to highlight layers in Photoshop.

I was searching for a photo on myiMac when it went into an endless loop. Only way I could think of to stop was using the button at the back of my computer. After restart, had to erase text in Appleworks one character at a time, because highlighter did not work properly; also looked "different: when typing on an internet website . ..and was unable to highlight layers (in Photoshop). What did I do wrong? and How can I correct it? PS: Also unable to edit my system. (Am only using my iMac Intel these days, with OS X.4.11)

Anybody able to help me out with this one? West coast, you awake yet?

Similar Messages

I have 3 older ext. hard drives that I've utilized many times. Today while searching for old files, one of the three is no longer recognized by my PowerMac. Any suggestions?

I have 3 older ext. hard drives that I've utilized many times. Today while searching for old files, one of the three is no longer recognized by my PowerMac. The drive is not listed in Disk Utility. Any suggestions?

Is the computer in you equipment line:
Dual Core Intel Xenon
(which is not a PowerMac but a Mac Pro) the one you are asking about, or do you have an older PowerMac?
If a Mac Pro, their forums are here:
Mac Pro
and, as Mac Pros have a totally different architecture from the pre-2005 Macs this forum covers, you may not have the same issues that can affect the older models. If someone didn't notice your equipment line, you could get advice that doesn't apply.
If you really have a pre-2005 PowerMac, read on.
If the stubborn external is USB and does not have its own power brick (i.e., it gets power only from the computer's UBS ports--"bus powered"), it may not be getting enough power. As electric motors age, they can demand more power than when new, and the power available on any USB port is limited.
The typical workabouts to making a computer recognize an aging, bus-powered USB drive are:
Get a powered USB hub (has its own power brick
Get a "Y" USB cable: 1 Meter USB 2.0 A to 5 Pin Mini B Cable - Auxiliary USB "Y" Power Design for external hard drives.
The second gets power from two USB ports on the computer and often that's enough.
Remember that the USB ports on your keyboard seldom provide enough power even for a thumb drive, so be sure to use the USB ports on the back of the computer.

How do i search for a photo album when i use the search facility on my iPad or iPhone it will not find photo albums of a given name can anyone help

how do i search for a photo album when i use the search facility on my iPad or iPhone it will not find photo albums of a given name can anyone help

Photo albums are not searched by Spotlight Search. Go to Settings > General > Spotlight Search to see and reorder the available search items.
For more details, see page 12 of the iPad iOS 5.1 User Guide

Error while searching for Business Partner in Web UI

Hi,
While searching for the Business Partner in Web UI either by First Name, last name or Account ID, we are getting following error:
Cannot display view BSPWD_BASICS/ErrorView2 of Component CRM_UI_Frame
An exception has occured
Exception class: CX_BOL_EXCEPTION - Access previously deleted Entity
Method: CL_CRM_BOL_ENTITY=>GET_ROOT
Source Text Row: 12
When the business partner blind search is given (i.e. by entering *), all the business partners get displayed without any problem.
Also, this problem occurs only for some business partners and NOT ALL.
This problem, has also been observed sometimes when an IBase entry is created in the background.
We are not quite sure whether notes, 135814 & 1515327 will help us in this regard, as the root cause is still unknown.
Could anyone suggest possible causes and solution for the same. We are on CRM 7, using the standard business role.
Thank you in advance.
Regards,
Chhaya

Hi Shiromani,
We have observed that this problem is peculiar with the data records attached to IBase ONLY. It means, if we process them further e.g. create a contract for the Business Partner after attaching the IBase, this problem doesnt occur. Then we are able to search the BP without any error.
In short, when an IBase is created for a BP, and if a search is given for such BP, the error given in the first thread occurs, But when an IBase is created and immediately after that a contract is attached to the BP, and if a search is given for such BP, then there is no error.
We are still further investigating the root cause. But any suggestion/inputs are welcome.
Thank you.
Regards,
Chhaya

PSE10 Crashes when searching for duplicate photos

Hello,
I recently upgraded to PSE10 and imported my catalog from a different machine (which had been running XP). Unfortunately, I ended up with a bunch of duplicate entries in the catalog, one with the path c:\users\... the other with c:\my documents\... These paths both point to the same image on the hard drive.
When I try to Search for Duplicate Photos (from Find>By Visual Searches), PSE invariably crashes. I am running PSE10 under Windows 7 (full system info at the end of this message).
Any idea why this might be happening, and is there a different way I can remove the duplicate entries in the catalog?
Thanks,
Chris
Full system info:
Elements Organizer 10.0.0.0
Core Version: 10.0 (20110914.m.17521)
Language Version: 10.0 (20110914.m.17521)
Current Catalog:
Catalog Name: My Photos
Catalog Location: C:\ProgramData\Adobe\Elements Organizer\Catalogs\My Photos\
Catalog Size: 52.3MB
Catalog Cache Size: 391.7MB
System:
Operating System Name: Windows 7
Operating System Version: 6.1
System Architecture: Intel CPU Family:6 Model:5 Stepping:2 with MMX, SSE Integer, SSE FP
Built-in Memory: 3.8GB
Free Memory: 705.3MB
Important Drivers / Plug-ins / Libraries:
Microsoft DirectX Version: 9.0
Apple QuickTime Version: Not installed
Adobe Reader Version: 10.1
Adobe Acrobat Version: Not installed
CD and DVD drives:
F: (hp DVDRAM BUS: 1 ID: 1 Firmware: GT20L)

If I understand well, what you are calling 'duplicates' are duplicate entries in the catalog, the same media being called either by its original path+filename or shortcut path+filename.
The organizer will try open two different files to compare them, but when trying to open the second 'shortcut', the file will be already blocked (in use). That could explain the failure of the comparison for similarity.
Try creating a new catalog with similar images, for instance jpegs and png copies. Does the visual search work ?
About backup and restore : If my supposition is right, that should work if you try to restore to a new custom location with keeping the file structure : the backup should create real file duplicates on different paths. If it works, finding visual duplicate should work, although this process may take a very long time.

The following error occured while searching for on-premises exchange server

I've previously posted this under the Exchange Forums - Exchange Server 2010
I look after a company where I installed a new DELL server last year, The server is running Windows Small Business Server 2011 which we installed. Exchange 2010 was installed as part of the Windows Small Business Server 2011 installation. At the time we
did not configure Exchange because they use external POP accounts for email. Eventually they wanted to move over to Exchange
When we created the user accounts using Windows SBS Console, it created a local mailbox for each user
No problems - [email protected]
Since late last year every time I create a new user within SBS Console, it errors creating the mailbox
Add a user account and assign a user role
Getting "Unexpected error occurred" when Setting up an e-mail account for user
Looking at the error "Unexpected error occurred" & MessagingManagement "Unexpected error occured"
The user account is created ok just no e-mail address is created for the user
I never thought much about this at the time as we weren't using Exchange email accounts. I decided to have a look at this issue over weekend
When I try to open Microsoft Exchange Management Console I'm getting "Initialization failed"
The following error occurred when searching for the On-Premises Exchange server
When I try to open Microsoft Exchange Management Shell, I get a similar error
I've download & run EMTShooter which just identifies there is an error & gives me the same error
I've installed & re-installed WinRM IIS Extensions
I've checked all the settings in IIS, Default Web Site, PowerShell, Modules & Paths...
Still cannot connect to Exchange
I've trawled through the internet for two days checking & testing every solution but no luck
I've checked every setting against another Windows SBS 2011 Server we've installed & works
I cannot find a difference
Can someone help me or point me in the right direction?
Peter Ralphs

Thanks for the reply Larry
I've added more detail about the error, this server is exactly how I initially installed it. This was a clean install not a migration so Exchange was a new installation. I have not applied any service packs as I did not want to confuse matters
or compound the issue. I was wondering whether to install Server 2008 Service Pack 1 & the Exchange Service Packs. I will check the event logs & report back with what I find.
Here's the original error I was getting when opening Exchange Management Console
Initialization failed
The following error ocurred while searching for the on-premises Exchange server:
[server.myd.local] Connecting to remote server failed with the following error message : The WinRM client cannot process the request. It cannot determine the content type of the HTTP response from the destination computer. The content type is absent or invalid.
For more information, see the about_Remote_Troubleshooting Help topic. It was running the command 'Discover-ExchangeServer -UseWIA $true -SuppressError $true -CurrentVersion 'Version 14.1 (Build 218.15)
I got similar error when trying to access the Exchange Management Shell
VERBOSE: Connecting to SERVER.myd.local
[server.myd.local] Connecting to remote server failed with the following error message : The WinRM client cannot process the request. It cannot determine the content type of the HTTP response from the destination computer. The content type is absent or invalid.
For more information, see the about_Remote_Troubleshooting Help topic.
+ CategoryInfo : OpenError: (System.Manageme....RemoteRunspace:RemoteRunspace) [],
PSRemotingTransportException
+ FullyQualifiedErrorId : PSSessionOpenFailed
When I opened the Exchange Management Console this week, the error had changed slightly
Initialization failed
The following error ocurred while searching for the on-premises Exchange server:
[server.myd.local] Connecting to remote server failed with the following error message : The WinRM client received an HTTP server error status (500), but the remote service did not include any other information about the cause of the failure. For more information,
see the about_Remote_Troubleshooting Help topic. It was running the command 'Discover-ExchangeServer -UseWIA $true -SuppressError $true -CurrentVersion 'Version 14.1 (Build 218.15)
I could only run Exbpa from a command prompt (obviously no access from Exchange Management Console)
This is the result of the Health Check Scan
Organization: First Organization
Default Global Address List Changed
The 'msExchQueryFilter' attribute of the default Global Address List 'Default Global Address List' has been changed. Default: '(Alias -ne $null -and (ObjectClass -eq 'user' -or ObjectClass -eq 'contact' -or ObjectClass -eq 'msExchSystemMailbox' -or ObjectClass
-eq 'msExchDynamicDistributionList' -or ObjectClass -eq 'group' -or ObjectClass - eq 'publicFolder'))'. Current: '((Alias -ne $null) -and (((ObjectClass -eq 'user') -or (ObjectClass -eq 'contact') -or (ObjectClass -eq 'msExchSystemMailbox') -or (ObjectClass
-eq 'msExchDynamicDistributionList') -or (ObjectClass -eq 'group') -or (ObjectClass -eq 'publicFolder'))))'.
Admin Group: Exchange Administrative Group (FYDIBOHF23SPDLT)
The default public folder database is remote
The default public folder database for mailbox database 'Mailbox Database' on server SERVER isn't local. Public folder database: CN=Public Folder Database 1529293969,CN=Databases,CN=Exchange Administrative Group (FYDIBOHF23SPDLT),CN=Administrative Groups,CN=First
Organization,CN=Microsoft Exchange,CN=Services,CN=Configuration,DC=myd,DC=local.
Server: SERVER
Disk timeout changed
Disk timeout on server SERVER.myd.local is not set at the default of 10 seconds. This is normal if third-party storage software is installed. Current timeout value is 160 seconds.
Client RPC binding found
The 'Rpc_Binding_Order' is set on server SERVER.myd.local. It is possible that either the Exchange or Outlook client is installed on the server. Current registry value: ncalrpc,ncacn_ip_tcp.
One thing I've noticed from the start is that the error occurs when it is "searching" for the Exchange Server, it then goes on to name the server [server.myd.local] it knows it's there but cannot access it ?
Another thing I've noticed is that it always refers to the "remote server" this server is Windows SBS 2011, it's the Domain Controller, DHCP Server, DNS Server & Exchange Server all in the same box
I also noticed that the Health Check stated that "The default public folder database is remote"
Has this something to do with it ?
Regards
Peter

How can I search for duplicate photos in iPhoto libraries?

How can I search for duplicate photos in iPhoto 9.5.1 library. Installed on iMac 2.7 GHz Intel Core i5, Mavericks 10.9.5.

These applications will identify and help remove duplicate photos from an iPhoto Library:
iPhoto Library Manager - $29.95
Duplicate Annihilator - $7.95 - only app able to detect duplicate thumbnail files or faces files when an iPhoto 8 or earlier library has been imported into another.
PhotoSweeper - $9.95 - This app can search by comparing the image's bitmaps or histograms thus finding duplicates with different file names and dates.
DeCloner - $19.95 - can find duplicates in iPhoto Libraries or in folders on the HD.
DupliFinder - $7 - shows which events the photos are in.
iPhoto AppleScript to Remove Duplicates - Free
PhotoDedupo - $4.99 (App Store) - this app has a "similar" search feature which is like PhotoSweeper's bitmap comparison. It found all duplicates
Duplicate Cleaner for iPhoto - free - was able to recognize the duplicated HDR and normal files from an iPhone shooting in HDR
Some users have reported that PhotoSweeper did the best in finding all of the dups in their library: iphoto has duplicated many photos, how...: Apple Support Communities.
If you have an iPhone and have it set to keep the normal photo when shooting HDR photos the two image files that are created will be duplicates in a manner of speaking (same image) but there are only twp apps that detected the iPhone HDR and normal photos as being duplicates: PhotoSweeper and Duplicate Cleaner for iPhoto. None of the other apps detected those two files as being duplicates as they look for file name as well as other attributes and the two files from the iPhone have different file names.
iPLM, however, is the best all around iPhoto utility as it can do so much more than just find duplicates. IMO it's a must have tool if using iPhoto.

How do I run a search for all photos on my iMAc?

How do I run a search for all photos on my iMAc?
Looking for something like search assistant...
actually on an Ext Hard drive.

open a finder window by clicking on mr. smiley face and then click on ALL PHOTO's on the bottom right

Cancel button functionality does not work--- while searching for G/l Acc

HI SAP SRM Gurus,
This is regarding an issue faced by the end user.
For information my client is on WAS 6.4 Patch Level 155, SRM 4.0, EBP 5.0, SRM Server 5.0.
In account assignment details..while searching for G/l account for the Account Assignment used at the time of creation of the shopping cart, if no G/l account is found, the Cancel button functionality provided, does not work, however when
G/l account(s) is/are found, then the Cancel button functionality
works properly.
Kindly assist.
Awaiting your reply in this regard.
Thanks in advance
Ankur

Hi,
Sound like a bug.
Did you open an OSS ticket ?
Kind regards,
Yann

I recently got IOS 8 and I like it but there is one problem on my camera roll it says i have 600 photos but i went into setting general and about and it says i have 2,743 photos my photos keep on duplicating how do i get this to stop.

i recently got IOS 8 and I like it but there is one problem on my camera roll it says i have 600 photos but i went into setting general and about and it says i have 2,743 photos my photos keep on duplicating how do i get this to stop. i have a iPhone 5c

Hi Bpaitin,
Go to Settings>General>Usage, and under iCloud, click on Manage Storage>click on your device, then under Backup Options, turn Photo Library off and then back on. See if that clears it up.
If it does not, reset your device (nothing will be lost): Hold down the Home and Power buttons at the same time and continue to hold them down until the Apple appears (up to 30 seconds). Once the Slide to Unlock screen redisplays, see if the issue is resolved.
Cheers,
GB

I phone is keeping searching for network even if i take the Sim out and i did reset but no use also it cant make software update - and the modem firmware has no number also

i phone is keeping searching for network even if i take the Sim out and i did reset but no use also it cant make software update - and the modem firmware has no number also

Either your phone is broken, or it was jailbroken. You can try a DFU restore.

My phone went into recovery mode and had to be factory restored, I hadnt backed it up to either the cloud or a computer in a long time and therefore I have lost all of my messages. Is there anyway to get the messages without a recent backup?

My phone went into recovery mode and had to be factory restored, I hadnt backed it up to either the cloud or a computer in a long time and therefore I have lost all of my messages. Is there anyway to get the messages without a recent backup?

Mikeyjd7 wrote:
My phone went into recovery mode and had to be factory restored, I hadnt backed it up to either the cloud or a computer in a long time and therefore I have lost all of my messages. Is there anyway to get the messages without a recent backup?
No.

HT201365 Hello . I have an iphone for which is currently IOS 7 updated. I have had some trouble with its batery life after IOS 7 update. I advised from the phone shop that I need to give it a factory restart and I made it. Now i have icloud activation loc

Hello . I have an iphone for which is currently IOS 7 updated. I have had some trouble with its batery life after IOS 7 update. I advised from the phone shop that I need to give it a factory restart and I made it. Now i have icloud activation lock and I have no idea when I create an icloud account. I donr remember any related email or password. I am completely losttt
Any help guys ? ( I am currently stuck with Nokia 2210

Welcome to the Apple community.
Unfortunately, unless you know the Apple ID, there is absolutely nothing that can be done, you cannot use your mobile device. You may be able to find your Apple ID at Look up your old and forgotten Apple ID

I was surfing online when suddenly my mac just freeze. So i had forced shut down it and turned it on again but then the folder with questionmark icon shows up. And i pressed (option key) to go to the utility but i cant find my startup disk anywhere!

I was surfing online when suddenly my mac just freeze. So i had forced shut down it and turned it on again but then the folder with questionmark icon shows up. And i pressed (option key) to go to the utility but i cant find my startup disk anywhere!

Well, if the internal hard drive is no longer readable, there's pretty much nothing anyone here can do about it. There are no magic words that will fix a hardware problem.
Make an appointment at the genius bar and have it looked at.

My Mac is slowing down and when I jump on the internet I see the rainbow ball a lot and it goes no where, I have to shut it down and try to restart several times a day?

My Mac is slowing down and when I jump on the internet I see the rainbow ball a lot and it goes no where, I have to shut it down and try to restart several times a day?

See if either of these help : http://www.maclife.com/article/feature/25_ways_speed_your_mac
http://www.macworld.com/article/151583/2010/05/spinningbeachballofdeath.html

While searching for a photo, my Mac went into endless loop, so had to shut it down using button. After restart, highlightrd text looked "different." Also unable to highlight layers in Photoshop.

Similar Messages

Maybe you are looking for