WHILE SETTING MY I PHONE6 ON LANGUAGE SELECTION IT SHOWING UNDER PROCESSING NOT ANY KEY IS WORKING HOW CAN I USE MOBILE
I PHONE 6 16 MB NEW PHONE MEID **** IMEI ******* 1 ICCID **** AFTER BUYING PHONE AT THE TIME OF SETTING LANGUAGE PHONE IS SHOWING SETTING LANGUAGE FROM 2 DAYS NO OTHER KEY WORKING
<Personal Information Edited by Host>
Hey rajendrafromshirpur,
Welcome to the Apple Support Communities! I understand that you are experiencing issues with your iPhone during the setup process. If it seems like the process has stalled (which it sounds like it has), you can try resetting your phone and starting again:
Restart or reset your iPhone, iPad, or iPod touch - Apple Support
http://support.apple.com/en-us/HT201559
Thanks,
Matt M.
Similar Messages
-
How can i use or embed the ' C' language in java
thanks a lot friends for your suggestion on using 'c' language to implement the control of the keyboard ie. to prevent a key stroke of : ctrl+alt+delete keys from closing a running java application. i was advised that it won't be possible to implement this with java language, the use of 'C' language was suggested. i then wish to ask the following:
1. how can i use 'C'language in a java program and be able to compile to program so that the resultant program can help me prevent the closing of my java-application when the user of the application presses the following keys : ctrl+alt+delete. i don't even know the c language at all. how can i start and how can i combine the resultant code with java.
2. i'm thinking of creating an application that retrieves information from a database, like microsoft sql or oracle, and displays the resultant data from a table, say STUDENT TABLE, in a java application using the JTable class. i don't even know how to use this JTable but i've seen it used and know it will suit what i have in mind.
3. how can i make the table dynamic, ie. how can i make the table to immediately register / show the result of an update to the 'STUDENT' table in the database.
4. THANKS FOR YOUR HELP IN ADVANCE. i will most appreciate it if you can give me a sample code or a site where i download one. once again thanks.Good luck disabling Ctrl+Alt+Del! I've read quite a bit about it, and at least on Windows 2000 (not sure about NT) or higher, disabling it is next to impossible. Problem is CAD is a system command, and the OS doesn't even send the keys to the active program. Ctrl+Alt+Del is handled by the GINA (Graphical Identification and Authentication) DLL installed on the system. You'll have to write and export the functions you need and change the GINA DLL used by the system to your own. Bear in mind that any small mistake in the dll can cause you to lose access to your computer if you haven't taken precautions!
On Windows 95/98, disabling Ctrl+Alt+Del is fairly easy as you just have to write some simple native code to fool the system that a password protected screensaver is running.
I've provided a link regarding winlogon and GINA here, but you've been forewarned!
http://msdn.microsoft.com/library/default.asp?url=/library/en-us/security/security/winlogon_and_gina.asp -
I created a site column at the root of my site and I have publishing turned on. I selected the Hyperlink with formatting and constraints for publishing.
I went to my subsite and added the column. The request was to have "Open in new tab" for their hyperlinks. I was able to get the column to be added and yesterday we added items without a problem.
The problem arose when, today, a user told me that he could not edit the hyperlink. He has modify / delete permissions on this list.
He would edit the item, in a custom list, and click on the address "click to add a new hyperlink" and then he would get the error below after succesfully putting in the Selected URL (http://www.xxxxxx.com), Open
Link in New Window checkbox, the Display Text, and Tooltip:
"Message from Webpage There was an error in the browser while setting properties into the page HTML, possibly due to invalid URLs or other values. Please try again or use different property values."
We are on IE 9.0.8.1112 x86, Windows 7 SP1 Enterprise Edition x64
The farm is running SharePoint 2010 SP2 Enterprise Edition August 2013 CU Mark 2, 14.0.7106.5002
and I saw in another post, below with someone who had a similar problem and the IISreset fixed it, as did this problem. I wonder if this is resolved in the latest updated CU of SharePoint, the April 2014 CU?
Summary from this link below: Comment out, below, in AssetPickers.js
//callbackThis.VerifyAnchorElement(HtmlElement, Config);
perform IISReset
This is referenced in the item below:
http://social.technet.microsoft.com/Forums/en-US/d51a3899-e8ea-475e-89e9-770db550c06e/message-from-webpage-error-there-was-an-error-in-the-browser-while-setting?forum=sharepointgeneralprevious
TThThis is possibly the same information that I saw, possibly from the above link as reference.
http://seanshares.com/post/69022029652/having-problems-with-sharepoint-publishing-links-after
Again, if I update my SharePoint 2010 farm to April 2014 CU is this going to resolve the issue I have?
I don't mind changing the JS file, however I'd like to know / see if there is anything official regarding this instead of my having to change files.
Thank you!
MattWe had the same issue after applying the SP2 & August CU. we open the case with MSFT and get the same resolution as you mentioned.
I blog about this issue and having the office reference.
Later MSFT release the Hotfix for this on December 10, 2013 which i am 100% positive should be part of future CUs.
So if you apply the April CU then you will be fine.
Please remember to mark your question as answered &Vote helpful,if this solves/helps your problem. ****************************************************************************************** Thanks -WS MCITP(SharePoint 2010, 2013) Blog: http://wscheema.com/blog -
I'm getting a very low signal from my Blackbird interface. The fire wire connection is selected properly and track recording sliders set. However the recording level slider in the lower right corner is grayed out. How can I get better signal?
If it's slow on startup it would be extensions loading or LaunchDaemons starting up.
You should have a look in:
/Library/LaunchDaemons
/Library/Extensions
You can count out anything in your home folder and it shouldn't put anything in /System as that's reserved for Apple. -
I have 2 questions regarding the iphone 5. 1 How do i get my yahoo mail set up. I tried the setting it up as both a yahoo mail and other mail. 2. I seem to have lost my notes on my iphone 5 but I have them on my ipad. How can I use cloud to sync my notes?
I will address your second question.
First, make sure your iPhone and iPad have absolutely identical Apple IDs. If they do, use that Apple ID in Settings > iCloud on your iPhone to select the "Notes" option. Lo and behold, all your iCloud notes should appear on your iPhone. -
How can I use an old XMP file on a new set of images??
I have an older XMP file that contains settings used to retouch some previous images in a particular way. I'd like to apply those same settings to a new set of images. How can I use that older XMP file on a new set of images in Lightroom?
The contents of the XMP file are as follows:
<x:xmpmeta xmlns:x="adobe:ns:meta/" x:xmptk="Adobe XMP Core 4.2-c020 1.124078, Tue Sep 11 2007 23:21:40
">
<rdf:RDF xmlns:rdf="http://www.w3.org/1999/02/22-rdf-syntax-ns#">
<rdf:Description rdf:about=""
xmlns:crs="http://ns.adobe.com/camera-raw-settings/1.0/">
<crs:Version>6.0</crs:Version>
<crs:ProcessVersion>5.7</crs:ProcessVersion>
<crs:WhiteBalance>Custom</crs:WhiteBalance>
<crs:Temperature>4700</crs:Temperature>
<crs:Tint>+4</crs:Tint>
<crs:Exposure>-0.35</crs:Exposure>
<crs:Shadows>5</crs:Shadows>
<crs:Brightness>+50</crs:Brightness>
<crs:Contrast>+25</crs:Contrast>
<crs:Saturation>-8</crs:Saturation>
<crs:Sharpness>25</crs:Sharpness>
<crs:LuminanceSmoothing>0</crs:LuminanceSmoothing>
<crs:ColorNoiseReduction>25</crs:ColorNoiseReduction>
<crs:ChromaticAberrationR>0</crs:ChromaticAberrationR>
<crs:ChromaticAberrationB>0</crs:ChromaticAberrationB>
<crs:VignetteAmount>0</crs:VignetteAmount>
<crs:ShadowTint>-1</crs:ShadowTint>
<crs:RedHue>0</crs:RedHue>
<crs:RedSaturation>0</crs:RedSaturation>
<crs:GreenHue>0</crs:GreenHue>
<crs:GreenSaturation>0</crs:GreenSaturation>
<crs:BlueHue>0</crs:BlueHue>
<crs:BlueSaturation>0</crs:BlueSaturation>
<crs:FillLight>0</crs:FillLight>
<crs:Vibrance>+5</crs:Vibrance>
<crs:HighlightRecovery>24</crs:HighlightRecovery>
<crs:Clarity>+8</crs:Clarity>
<crs:Defringe>0</crs:Defringe>
<crs:HueAdjustmentRed>0</crs:HueAdjustmentRed>
<crs:HueAdjustmentOrange>0</crs:HueAdjustmentOrange>
<crs:HueAdjustmentYellow>0</crs:HueAdjustmentYellow>
<crs:HueAdjustmentGreen>0</crs:HueAdjustmentGreen>
<crs:HueAdjustmentAqua>0</crs:HueAdjustmentAqua>
<crs:HueAdjustmentBlue>0</crs:HueAdjustmentBlue>
<crs:HueAdjustmentPurple>0</crs:HueAdjustmentPurple>
<crs:HueAdjustmentMagenta>0</crs:HueAdjustmentMagenta>
<crs:SaturationAdjustmentRed>0</crs:SaturationAdjustmentRed>
<crs:SaturationAdjustmentOrange>0</crs:SaturationAdjustmentOrange>
<crs:SaturationAdjustmentYellow>0</crs:SaturationAdjustmentYellow>
<crs:SaturationAdjustmentGreen>0</crs:SaturationAdjustmentGreen>
<crs:SaturationAdjustmentAqua>0</crs:SaturationAdjustmentAqua>
<crs:SaturationAdjustmentBlue>0</crs:SaturationAdjustmentBlue>
<crs:SaturationAdjustmentPurple>0</crs:SaturationAdjustmentPurple>
<crs:SaturationAdjustmentMagenta>0</crs:SaturationAdjustmentMagenta>
<crs:LuminanceAdjustmentRed>0</crs:LuminanceAdjustmentRed>
<crs:LuminanceAdjustmentOrange>0</crs:LuminanceAdjustmentOrange>
<crs:LuminanceAdjustmentYellow>0</crs:LuminanceAdjustmentYellow>
<crs:LuminanceAdjustmentGreen>0</crs:LuminanceAdjustmentGreen>
<crs:LuminanceAdjustmentAqua>0</crs:LuminanceAdjustmentAqua>
<crs:LuminanceAdjustmentBlue>0</crs:LuminanceAdjustmentBlue>
<crs:LuminanceAdjustmentPurple>0</crs:LuminanceAdjustmentPurple>
<crs:LuminanceAdjustmentMagenta>0</crs:LuminanceAdjustmentMagenta>
<crs:SplitToningShadowHue>138</crs:SplitToningShadowHue>
<crs:SplitToningShadowSaturation>13</crs:SplitToningShadowSaturation>
<crs:SplitToningHighlightHue>0</crs:SplitToningHighlightHue>
<crs:SplitToningHighlightSaturation>0</crs:SplitToningHighlightSaturation>
<crs:SplitToningBalance>0</crs:SplitToningBalance>
<crs:ParametricShadows>0</crs:ParametricShadows>
<crs:ParametricDarks>0</crs:ParametricDarks>
<crs:ParametricLights>0</crs:ParametricLights>
<crs:ParametricHighlights>0</crs:ParametricHighlights>
<crs:ParametricShadowSplit>25</crs:ParametricShadowSplit>
<crs:ParametricMidtoneSplit>50</crs:ParametricMidtoneSplit>
<crs:ParametricHighlightSplit>75</crs:ParametricHighlightSplit>
<crs:SharpenRadius>+1.0</crs:SharpenRadius>
<crs:SharpenDetail>25</crs:SharpenDetail>
<crs:SharpenEdgeMasking>0</crs:SharpenEdgeMasking>
<crs:PostCropVignetteAmount>0</crs:PostCropVignetteAmount>
<crs:GrainAmount>0</crs:GrainAmount>
<crs:ColorNoiseReductionDetail>50</crs:ColorNoiseReductionDetail>
<crs:ConvertToGrayscale>False</crs:ConvertToGrayscale>
<crs:ToneCurveName>Medium Contrast</crs:ToneCurveName>
<crs:ToneCurve>
<rdf:Seq>
<rdf:li>0, 0</rdf:li>
<rdf:li>32, 22</rdf:li>
<rdf:li>64, 56</rdf:li>
<rdf:li>128, 128</rdf:li>
<rdf:li>192, 196</rdf:li>
<rdf:li>255, 255</rdf:li>
</rdf:Seq>
</crs:ToneCurve>
<crs:CameraProfile>Adobe Standard</crs:CameraProfile>
<crs:CameraProfileDigest>3DA8CE4A626CE36A1D0C55BF157793C9</crs:CameraProfileDigest>
<crs:HasSettings>True</crs:HasSettings>
</rdf:Description>
</rdf:RDF>
</x:xmpmeta>I’m pretty sure Adobe NEVER intended for someone to copy an XMP file from one photo to another outside of LR as a way to replicate settings. You can make a preset from a photo, as discussed, or if you don’t want to do that, copy-paste the settings from a representative photo that you initially select to one or more new photos. You could have a special LR folder that holds standard photos to copy/paste from. Of course creating a Develop preset from the representative photo is the “normal” way to handle such situations, but maybe you have hundreds of different situations to copy settings from and don’t want to create presets for each one, but I’d argue that you could create a complex folder hierarchy for your presets and still have them findable without that much problem.
As far as the mystery about why some photos show Reset and some show From Metadata, is the Process Version (down in Camera Calibration) of the photo before reading the settings the same between the two situations? And in general, are these virgin photos newly imported into LR or have some been modified in LR, already? Does an XMP file already exist for any of these, where that XMP is being overwritten by your external-to-LR copying? Or do you have auto-write-XMP enabled and your hand-copied XMP is getting overwritten by LR, automatically, before you have a chance to read in anything? -
Images appear fine in Photoshop cs6 and cc, but print too dark, and also show too dark in Windows picture viewer. How can I correct this? Is this a Photoshop setting issue or what?
Ok, look at your files in Photoshop. What is the profile assigned to them? You can find this out by going to the Status bar at the bottom, clicking on the right-pointing triangle and choosing document Profile from the list.
Then in Windows, go to your Control Panel > Color Management and add sRGB (if it isn't there) and select it as your default profile.
I hope that will work. -
When I select a title in the iTunes Store and click on Play in iTunes I am sent to the download page for iTunes 10 which I have already. The selected title cannot be found anywhere in my iTunes. How can I get the title in iTunes with possibility to buy it?
The issue is that your credit or debit card credentials must be associated with the same country where you reside in order to purchase iTunes content.
"Although you can browse the iTunes Store in any country without being signed in, you can only purchase content from the iTunes Store for your own country. This is enforced via the billing address associated with your credit card or other payment method that you use with the iTunes Store, rather than your actual geographic location. You can use the iTunes Store in all countries of which you’re a resident, but you’ll either need a separate iTunes Store account for each one, or you’ll need to continually be switching the billing information on your single account. Generally, it’s simpler just to set up an alternative account for these situations, although it’s worth nothing that features like iTunes in the CLoud and iTunes Match are designed to work best when using a single iTunes Store account, as you can only switch accounts with these services every 90 days."
From here > The Complete Guide to Using the iTunes Store | iLounge Article -
How can i use param in my select query ( see code)
Hi ,
I need to use the param instead of hardcoding the value in the select query , when i did that it is working .
I think the limit of args is only till the end of main and my select query is in a method called Load() .
How can i use the param in my select query .
public static void main(String[] args){
name = args[0];
class= args[1];
new Load();
}//end of main
public Load()
try {
Class.forName(JDBC_DRIVER);
connection = DriverManager.getConnection(DATABASE_URL,"username","pw");
statement = connection.createStatement();
//First Query : pin and ticket number
ResultSet resultSet = statement.executeQuery("SELECT pin , ticketnumber from airport ,year where "+ "year.year_name= Here i need to use the param (instead of hardcoding) and year.class_year= Here too i need to use param");
}// end of method Load()Edited by: 1sai on Sep 24, 2008 7:34 AM
Edited by: 1sai on Sep 24, 2008 7:35 AMMight I suggest you change the structure of your program to the following:
public class Load {
private Connection conn;
private PreparedStatement statement;
public Load(String sql) {
init(sql);
protected void init(String sql) throws Exception {
Class.forName(JDBC_DRIVER);
conn = DriverManager.getConnection(DATABASE_URL, "username", "pw");
statement = conn.prepareStatement(sql);
public ResultSet execute(String p1, String p2) throws Exception {
statement.setString(1, p1);
statement.setString(2, p2);
return statement.executeQuery();
public void close() throws Exception {
if (statement != null)
statement.close();
statement = null;
if (conn != null)
conn.close();
conn = null;
public static void main(String[] args) throws Exception {
String sql = args[0];
String param1 = args[1];
String param2 = args[2];
Load load = new Load(sql);
ResultSet rs = load.execute(param1, param2);
while (rs.next())
System.out.println(rs.get(0));
rs.close();
load.close();
}This allows you to use the same "Load" object for multiple queries with different parameters.
I do not recommend you actually use the code above in any sort of production application. You should really take a look at Spring Framework along with an ORM tool like Hibernate or Ibatis to simplify your DAO layer.
Hope this helps,
David -
I purchased an itunes card in the USA while on vacation for $50.00----how can I use the card while in the usa.....Ellis
You will need to set up an account in the US iTunes Store to use that card, for which you will need a valid US mailing address. Note that the Terms of Use for the iTunes Store state that you will not attempt to use the US iTunes Store from any other country, so you will not be able to buy new items or re-download previously purchased ones from the US without violating those terms. So you may want to reconsider your purchase and perhaps return the iTunes card or sell it to someone who lives in the US.
Regards. -
Hi All
I want to rent a film from iTunes. The language is given as french which i don't speak! How can i see if the film has an english language audio without renting it first?
Thanks for helpThe language(s) that a film is available in should be listed on its description page in the store e.g. (this is from a Mac's iTunes, I don't have Apple TV so I'm not sure if you see the same description pages) :
If a film doesn't have any alternate languages or subtitles then you will just see the 'primary' language mentioned.
If it is available in other languages, then to select it when playing it : iTunes: Language settings for video -
I'm updating my OS and I paused it for a while then turned my PC off then when I opened it again the download was gone. How can I retrieve it?
"I'm updating my OS"
Which OS?
"and I paused it for a while then turned my PC off"
Why?
Just let it complete the download.
"then when I opened it again the download was gone. How can I retrieve it?"
If you mean iOS, select the iOS device in iTunes then click Update. -
i formated my i phone 3 g and when it loaded back up and asked me to choose language local and wi fi connection everything went fine but when i hit next it said my i pod can not be activated why and how can i fix this i bought it for my daughter for x mas and that is tomorrow
AdaS_VZW,
I'm not sure if the area has been surveyed; it's a large group of apartment buildings about a within a couple miles of Dulles International Airport in Northern Virginia, so I would imagine that it probably has, but I'm not sure. How would I find out?
I understand that the Network Extender does not support LTE connections (I know there are two models, the 1x-only and 3g, both made by Samsung - I have the 3g model, SCS-2U01). I know that it can support a 3G data connection, but that should be irrelevant - I'm always connected to my wifi network in my apartment.
What's particularly vexing, however, is that both a Galaxy S4 and Galaxy Nexus in my apartment (the other lines on my account) do not seem to have this issue. While I haven't done so with the S4, the Nexus exhibits this problem when my SIM is in it - and again, this is a fresh SIM from just a few weeks ago.
I'm currently trying to disable Mobile Data when in the apartment to see if that will make it more stable. I'll post in a day or two with results from that.
Shawn -
How can I use dns-sd to set up a priner to work with AirPrint?
How can I use dns-sd to set up a priner to work with AirPrint?
The priner is an HP LaserJet 1200 connected to the network with an HP JetDirect.Some of the third-party apps like "handyPrint" are able to configre the HP JetDirect to work with AirPrint.
I am trying to work up my own solution.
SyBB -
How can i use index in select query.. facing problem with the select query.
Hi Friends,
I am facing a serious problem in one of the select query. It is taking a lot of time to fetch data in Production Scenario.
Here is the query:
SELECT * APPENDING CORRESPONDING FIELDS OF TABLE tbl_summary
FROM ztftelat LEFT JOIN ztfzberep
ON ztfzberep~gjahr = st_input-gjahr
AND ztfzberep~poper = st_input-poper
AND ztfzberepcntr = ztftelatrprctr
WHERE rldnr = c_telstra_accounting
AND rrcty = c_actual
AND rvers = c_ver_001
AND rbukrs = st_input-bukrs
AND racct = st_input-saknr
AND ryear = st_input-gjahr
And rzzlstar in r_lstar
AND rpmax = c_max_period.
There are 5 indices present for Table ZTFTELAT.
Indices of ZTFTELAT:
Name Description
0 Primary key( RCLNT,RLDNR,RRCTY,RVERS,RYEAR,ROBJNR,SOBJNR,RTCUR,RUNIT,DRCRK,RPMAX)
005 Profit (RCLNT,RPRCTR)
1 Ledger, company code, account (RLDNR,RBUKRS, RACCT)
2 Ledger, company code, cost center (RLDNR, RBUKRS,RCNTR)
3 Account, cost center (RACCT,RCNTR)
4 RCLNT/RLDNR/RRCTY/RVERS/RYEAR/RZZAUFNR
Z01 Activity Type, Account (RZZLSTAR,RACCT)
Z02 RYEAR-RBUKRS- RZZZBER-RLDNR
Can anyone help me out why it is taking so much time and how we can reduce it ? and also tell me if I want to use index number 1 then how can I use?
Thanks in advance.Hi Shiva,
I am using two more select queries with the same manner ....
here are the other two select query :
***************1************************
SELECT * APPENDING CORRESPONDING FIELDS OF TABLE tbl_summary
FROM ztftelpt LEFT JOIN ztfzberep
ON ztfzberep~gjahr = st_input-gjahr
AND ztfzberep~poper = st_input-poper
AND ztfzberepcntr = ztftelptrprctr
WHERE rldnr = c_telstra_projects
AND rrcty = c_actual
AND rvers = c_ver_001
AND rbukrs = st_input-bukrs
AND racct = st_input-saknr
AND ryear = st_input-gjahr
and rzzlstar in r_lstar
AND rpmax = c_max_period.
and the second one is
*************************2************************
SELECT * APPENDING CORRESPONDING FIELDS OF TABLE tbl_summary
FROM ztftelnt LEFT JOIN ztfzberep
ON ztfzberep~gjahr = st_input-gjahr
AND ztfzberep~poper = st_input-poper
AND ztfzberepcntr = ztftelntrprctr
WHERE rldnr = c_telstra_networks
AND rrcty = c_actual
AND rvers = c_ver_001
AND rbukrs = st_input-bukrs
AND racct = st_input-saknr
AND ryear = st_input-gjahr
and rzzlstar in r_lstar
AND rpmax = c_max_period.
for both the above table program is taking very less time .... although both the table used in above queries have similar amount of data. And i can not remove the APPENDING CORRESPONDING. because i have to append the data after fetching from the tables. if i will not use it will delete all the data fetched earlier.
Thanks on advanced......
Sourabh
Maybe you are looking for
-
Podcast feed broken in two in "Podcast" view, but complete in "List" view iTunes 11
Hi all, Today I updated to iTunes 11 on my Windows 7 laptop. When I went to update some podcasts I subscribe to I noticed that there were two lists for a couple of the different podcasts inthe defaualt view. I thought perhaps there was something wron
-
I have a 13inch, late 2011 Macbook Pro. It has a Os x Lion 10.7.4 as its' software. The camera was woking fine when I got it, and then one day it just stopped working. I have no idea why. I checked in system information to make sure it was present in
-
Hello, I'll my Englisch writing is good enough that you'll understand my question/problem. A few month a go i've bought a sony camcorder. HDR-CX130E. On the box I can read:"Works with iMovie". That was correct. After an update from Apple IOS it's no
-
HT1369 iphone is not showing up in itunes
i phone dont show up in itunes and it use to i have updated it
-
I am trying to burn quicktime clips from FCP5 to DVD. The burner goes through whole process, I even get the verifing screen. Once dvd is finished the DVD is not recognized by computer. I have tried to burn same clip in iDVD project and it worked fine