While signing a .XML file a message "cannot read the file for signing" is displayed. What is the solution.
An official site incometaxindiaefiling.gov.in requires .XML files to be uploaded. When .XML files are uploaded without digital signatures there is no problem. When digital signatures are required for signing the same a message 'CANNOT READ THE FILE FOR SIGNING" is displaced. It happens with CHROME and IE also. The solution which I have devised is that I copy the .XML files in a folder called FAKEPATH in C: drive and pick the file for signing from this folder. The browser allows the file to sign with digital signatures. What is the solution.
Ashish Goel
Ashish,
You might want to submit this feedback at https://incometaxindiaefiling.gov.in/e-Filing/Services/Feedback.html instead.
Similar Messages
-
error message cannot write to file when trying to install itunes on windows 8 laptop.
Hi Stacy,
Welcome to Apple Support Communities.
Take a look at the article below, it provides a lot of great tips that will resolve most iTunes installation issues.
Issues installing iTunes or QuickTime for Windows
http://support.apple.com/kb/ht1926
If you run into any issues, just reply with details about the step you're on and what you're seeing.
-Jason -
I just tried to update Firefox to version 9.0.1. It got to 13% extracting, then I got the error message, Cannot Open Output File.
The file could be downloaded incorrectly. Could you redownload it again from [http://getfirefox.com http://getfirefox.com]?
-
When I try to open itunes, I get message cannot open this file because it was created by a newer version
CAn anyone help?Which system are you running (is this information correct in your profile)?
Are there complicating issues to this question such as you transferring libraries between computers?
Have you upgraded iTunes recently?
Troubleshooting iTunes installation on Mac OS X - http://support.apple.com/kb/HT2311 - read section on Opening iTunes for information about running multiple copies of iTunes. -
Bearts Audio Control Pannel will not open. Get error message cannot find startup file
Bearts Audio Control Pannel will not open. Get error message cannot find startup file!
Downloaded and instaled up-date for IDT audio from driver up-date. After installation could no longer oppen Beats Audio Control Pannel. Looked for download to re-install BEATS Audio but cannot find one.
Any suggestions.
Sound works with IDT driver installed.
Pavilion P7-1500ZHi,
Try using Recovery Manager to reinstall the IDT HD Audio Driver ( this will also reinstall the Beats Audio interface ) - the procedure for using recovery manager to reinstall Software and Drivers is detailed in the document on the link below.
Recovery Manager - Windows 8.
Recovery Manager - Windows 7
After the reinstallation has completed, restart the PC.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience -
Error message "cannot open resource file" ID CS6
CS6 InDesign, getting error message "cannot find resource file" Tried deleting prefs but didn't work.
I'm sorry. I'm running OS 10.7.5 and had previous error messages about several plugins not loading due to color panel missing. Deleted prefs, added color panel back with Manage Extensions then got the "cannot open resource file" error. I know the error message above is different and I thought I had fixed it but somehow it didn't change when I updated my post. I also have a couple of old versions of CS on my computer and I don't know if I should uninstall those or if it doesn't matter. I don't know how to do that, either. I'm not very computer literate so every problem is difficult for me. Thank you.
-
How can I convert my Open Source document files into Word document files? I cannot download Pages since my Macbook Air does not have the most recent software. I downloaded open office to my mac to try and save money. It worked well for a while. Now I get this pop-up message that asks me to "Reopen" and when I select the option, nothing happens. I cannot save my documents anymore and I cannot convert them to word. Help!
dwb wrote:
Does OpenOffice output Word documents by default or do you have to select it manually?
You have 17 options to save as in Open Office, one of which is .doc files, yes it needs to be saved manually.
You may be able to default to DOC, but have not tried same.
Since Open Office is 99% same as Word, I use it, or Word, either one. Open Office is a bit less buggy than Word 11' -
cannot open pictures in Window 8.1...getting message 'the remote procedure call failed". What is the solution?
I recently bought a new HP computuer and uploaded Window 8.1. I then transfered photo files from old computer to new computer using a portable storage drive.
When trying to view the photos, a message pops up showing a file path...and the message 'the remote procedure call failed'. Photos are in jpeg format.
Please let me know what I can do to view photos?What program you use to view these photos? Choose another app to view these photos
for a test.
This issue only occurred when you view photo? What is the result if we connect the
portable storage drive to other computer (if possible)?
Run sfc/scannow to check and fix if there are some missing or corrupted system files.
Check the event viewer to see the detailed information of this issue.
Regards
Yolanda
TechNet Community Support -
Pain't cannot read this file. This is not a valid bitmap file or it's format is not currently suppo
Have some photos of a warehouse fire in Plymouth Indiana. Files were saved as .jpg Can't get them to open.
One message is "
Pain't cannot read this file. This is not a valid bitmap file or it's format is not currently supported."
Couldn’t display DSC-0023.jpg because a suitable graphics importer could not be found.
Carl Beason
Windows 7, Photoshop cs4
Help PleaseAs has been suggested above, I would explore Opening the files in another program first, and if successful, just doing a Save_As from that program.
I do not know how sensitive Paint might be, but Ps really wants the JPEG header info to be well-formed. I often encounter JPEG errors in Ps, and my first stop is to IrfanView (free), or ThumbsPlus (commercial), as both seem much more lenient with JPEG's. I have only had a few files, that nothing on my computer would open. I assume that they were just too corrupt.
With either my IrfanView, or ThumbsPlus, when Opened, I do a Save_As, and choose a low compression/high-quality JPEG. If you other program supports Save_As PSD, that would be my # 1 choice, and keep JPEG out of the mix from that point on.
Good luck,
Hunt -
I keep getting this message "Sync encountered an error while connecting: Failed to connect to the server. Please try again" What's the problem in English
Hi,
Sometimes the server is not available and you can get an error like this one. Usually it works if you try to sync later. If this doesn't work, take a look to [https://philikon.wordpress.com/2011/06/13/how-to-file-a-good-sync-bug/ this post] to learn how to report a bug.
Let me know if this is helpful. -
I used ADE 4.0 and ebook transferred to computer and Nook - it opens on my computer but will not open in Nook. Error message says "This Nook cannot read this file. It may be an unsupported format." What can I do to open it on my Nook?
First, I would recommend repairing the hard drive with Disk Utility.
If that doesn't fix the problem, there's a very dangerous command you can execute in the Terminal. This is very hazardous, because a simple typo can result in very drastic consequences. I have seen people erase their entire hard drive by putting a space in the wrong place! So, please follow the directions I'm going to give you very carefully!
Open the Terminal, which is found in the Utilities folder in the Applications folder. In the Terminal, enter the following:
sudo rm -f
Make sure to put a space after the "-f"! Then, drag the troublesome file from the Finder and drop it on the Terminal window. That should insert the path to the file in the command. Then go back to the Terminal and press return. You will be asked for your password, and when you type it, nothing will be shown as a security measure. Press return again after entering your password. The file should be deleted. -
Cannot read image file in oracle 10g forms, getting error frm-47100
I'm unable to read the image from the file location. But If I do re-save via MS-Paint the same image then I'm able to load successfully. I want to load image directly instead of re-save. Error getting like "frm-47100 Cannot read image file".
Need your co-operation to solve this issue.
Thanks in advance!
declare
tiff_image_dir varchar2(80):=('D:\IMAGE\');
photo_filename varchar2(80);
begin
photo_filename:=tiff_image_dir||:IMAGE_NO||'.JPG';
if :image_no is null then
:Image_no :=:UID_NO;
end if;
read_image_file(photo_filename,'JPG','image');
WRITE_IMAGE_FILE('output.tif','TIFF','g_image_info.image',maximize_compression,original_depth)
end;Hi Sindhu,
By default any operating system file extension starts after the dot. So in this case when it says 2 dots it will think there is something wrong.
RajeshALex -
File read access denied for signed applet
Hi:
I have a signed applet with a certificate generated with the keytool. Yet, I keep getting this error:
java.lang.Exception: java.security.AccessControlException:
access denied (java.io.FilePermission C:\WINDOWS\system32\aetpkss1.dll read)The error is produced when the method loadKeyStore(pin) below is called.
private KeyStore ks;
private Provider provider;
private static final String providerName = "PKCS11";
private static final String providerLibrary = "aetpkss1.dll";
public void loadKeyStore(String pin) throws IOException,
CertificateException, KeyStoreException, NoSuchAlgorithmException {
if (provider == null)
registerProvider(providerLibrary);
try {
ks = KeyStore.getInstance(providerName,provider);
} catch (Exception e) {
throw new KeyStoreException("Failed get keystore instance\n"
+ e.getMessage());
try {
ks.load(null, pin.toCharArray());
} catch (Exception e) {
throw new KeyStoreException("Failed load keystore\n"
+ e.getMessage());
public void registerProvider(String library)
throws FileNotFoundException, KeyStoreException {
String fileName;
if (new File(library).isAbsolute())
fileName = library;
else
fileName = getAbsolutePath(library);
if (!(new File(fileName).exists()))
throw new FileNotFoundException("No such file: " + fileName);
String config = "name = " + providerName + "\n"
+ "library = " + fileName;
ByteArrayInputStream confStream =
new ByteArrayInputStream(config.getBytes());
try {
provider = new sun.security.pkcs11.SunPKCS11(confStream);
Security.addProvider(provider);
} catch (Exception e) {
throw new KeyStoreException("Can initialize " +
"Sun PKCS#11 provider. Reason: " +
e.getCause().getMessage());
private String getAbsolutePath(String lib) throws FileNotFoundException {
String[] searchPath;
/* NOTE: This should be modified to suit different versions of *
* Windows and not just Windows XP */
if (System.getProperty("os.name").matches("^(?i)Windows.*")) {
searchPath = new String[] { "C:\\WINDOWS\\system32" ,
"C:\\java" };
} else {
searchPath = new String[] { "/usr/local/lib/" };
for (int i = 0; i < searchPath.length; i++) {
if ((new File(searchPath[i] + File.separator + lib).exists()))
return (searchPath[i] + File.separator + lib);
throw new FileNotFoundException("Library not in search path " + lib);
}The above code is called by a java script, the class' constructor is empty.
The error appears not to be caught by my code. I have tried to insert try/catch statements everywhere to figure out where this error is produced.
The code is write off of the applet for signing with a smart card by Svetlin Nakov - and his applet works!
I have also made a CLI application that uses the above code and it works perfectly.
So: Something is wrong either with my certificate, the signing method, signature verification or something completely different. Any hints?
The certificate I generated with
keytool -genkey -keystore mystore -alias me
keytool -seflcert -keystore mystore -alias meI have tired both with and without the selfcert step.
Thanks! ErikThe problem has been identified: Placing registerProvider() in the constructor the error no longer occurs, instead an error is produced when the key store is loaded.
It appears that the javascript code is not trusted and so, even though the applet is signed, access privileges are restricted to those of the java script.
A solution to this problem is not clear, but possibly, serving the pages from a trusted server, the java script will be trusted, some documentation seem to indicate. -
I keep getting an error message that reads "to update application sign into the account you used to purchase it"
I am trying to download Final Cut Pro X 10.0.9
I am signed in with the account that I purchased Final cut Pro X
I don't have another account I'm not sure what's going onWelcome to Apple Support Communities
Open the Mac App Store and go to Purchases. Do you see Final Cut Pro X listed?
If so, open a Finder window, choose Applications in the sidebar and delete Final Cut Pro X. Then, go to the Mac App Store and download Final Cut Pro X for free.
If you don't see it in Purchases, see if it's hidden, and if so, unhide it > http://support.apple.com/kb/HT4928 If it doesn't work, contact with the Mac App Store support > http://www.apple.com/support/mac/app-store/contact -
Photoshop CS2 Cannot read PNG files--"Not Enough Memory"
Hi! I have a bit of a problem. I've scoured the interwebs for days but can't find a solution.
My copy of PSCS2 was able to open PNGs in the past, but it just up and decided it doesn't want to anymore. I'm serious--I can't think of any major overhaul or anything I did to cause it, but now it won't read them correctly. It says there's "not enough memory," which doesn't really make sense, when I have a Macbook Pro and nothing running in the background. On top of that, the particular files I've been trying to open are barely 100kb. I've used canvases upwards of ten thousand square pixels in dimension with no problem.
This is with any PNG file. It's not an "incorrect extension" problem, because I made these files and just need to reopen them to edit things.
Here are some screenshots that show what's been happening; nothing exciting, but just in case someone notices something I don't:
That's the picture I want to open.
And that's what pops up.
:/ I'm a little dumbfounded. Halp?Now, this is strange.
I restarted my computer and now the message has changed--to a simple one, but albeit still confusing.
Sigh.
I didn't do anything but restart my computer.
Maybe you are looking for
-
I have email addresses at a company called Fusemail.com and forward those emails to my mac account. However, as of a few days ago, those forwarded emails have stopped coming. I checked with Fusemail and they're service is working fine. I then tried f
-
Problem with popup conformation windows in SAP XI 7
Dear XI community, in our company we have installed the latest available release of SAP XI (nw2004s) and I have the following problem. When the system (web interface) try to display a popup window in order to confirm the user actions as for example t
-
Itunes/QT converts video from sound to no-sound
I have a video that has sound. when i convert it for ipod or when I convert in QT to ipod, it ends up converted with no sound. Any thoughts? Thanks!
-
Creating database triggers from forms
what we can create a data base trigger from from .if yes plzzz tell me its procedure.
-
I created a partition og 100 GB to install WINDOWS 7, but didnt install it later, tried to merge it back but it didnt work. the 100 GB partition is now invisible. Please suggest me how to get the partition merged back.