While TO creation SU management no will not determined automatically

Hai SAP Gurus,
i defind Bulk storage type with SU management.
while creation of TO ,SU number will not determined automatically.We need to give manually for each SU number for each pallet.If delivery comes 20 pallets...we need to enter 20 SU nembers.Very difficult to find the SU numbers each time.Kindly give me solution if any body knows.
reward points...

Hi Kishore,
We have a similar situation, but with external SU numbers.
do the storage section serach config and maintain the storage section indicators in the material master .
Know during the TO creation if the batch is mentioned in the TO then it will automatically pick the batch ( corresponding SU) into the TO.
Make sure you picking startegy is also correct for storage type.
Hope this helps !!!

Similar Messages

Managed server will not start

I have a new WebLogic 10 server and none of the new app servers will start. Gets the message "the Node Manager associated with machine sitportal1 is not reachable.
All of the servers selected are currently in a state which is incompatible with this operation or are not associated with a running Node Manager or you are not authorized to perform the action requested. No action will be performed. " When I check the node manager logs (node manager service IS running) it has the error lsited below. I found this solution but not sure how to check or verify it. *Solution:
It could be that the CA certificates sent to the server are being shown in the wrong order for the chain. Review the CAs and see if the order such as Public, Intermediate, Root CA is respected. *
Any guidance would be appreciated and points awarded. Thanks
Dec 23, 2008 2:46:59 PM> <Warning> <Uncaught exception in server handler: javax.net.ssl.SSLKeyException: [Security:090482]BAD_CERTIFICATE alert was received from 127.0.0.1 - 127.0.0.1. Check the peer to determine why it rejected the certificate chain (trusted CA configuration, hostname verification). SSL debug tracing may be required to determine the exact reason the certificate was rejected.>
javax.net.ssl.SSLKeyException: [Security:090482]BAD_CERTIFICATE alert was received from 127.0.0.1 - 127.0.0.1. Check the peer to determine why it rejected the certificate chain (trusted CA configuration, hostname verification). SSL debug tracing may be required to determine the exact reason the certificate was rejected.
     at com.certicom.tls.interfaceimpl.TLSConnectionImpl.fireException(Unknown Source)
     at com.certicom.tls.interfaceimpl.TLSConnectionImpl.fireAlertReceived(Unknown Source)
     at com.certicom.tls.record.alert.AlertHandler.handle(Unknown Source)
     at com.certicom.tls.record.alert.AlertHandler.handleAlertMessages(Unknown Source)
     at com.certicom.tls.record.MessageInterpreter.interpretContent(Unknown Source)
     at com.certicom.tls.record.MessageInterpreter.decryptMessage(Unknown Source)
     at com.certicom.tls.record.ReadHandler.processRecord(Unknown Source)
     at com.certicom.tls.record.ReadHandler.readRecord(Unknown Source)
     at com.certicom.tls.record.ReadHandler.readUntilHandshakeComplete(Unknown Source)
     at com.certicom.tls.interfaceimpl.TLSConnectionImpl.completeHandshake(Unknown Source)
     at com.certicom.tls.record.ReadHandler.read(Unknown Source)
     at com.certicom.io.InputSSLIOStreamWrapper.read(Unknown Source)
     at sun.nio.cs.StreamDecoder$CharsetSD.readBytes(StreamDecoder.java:411)
     at sun.nio.cs.StreamDecoder$CharsetSD.implRead(StreamDecoder.java:453)
     at sun.nio.cs.StreamDecoder.read(StreamDecoder.java:183)
     at java.io.InputStreamReader.read(InputStreamReader.java:167)
     at java.io.BufferedReader.fill(BufferedReader.java:136)
     at java.io.BufferedReader.readLine(BufferedReader.java:299)
     at java.io.BufferedReader.readLine(BufferedReader.java:362)
     at weblogic.nodemanager.server.Handler.run(Handler.java:66)
     at java.lang.Thread.run(Thread.java:595)

Hii
This is a Common Error.
1.Make sure your Admin Server is in Running mode.
2.Make sure that your Managed Server is in shutdown mode.
3.Make sure that your domain mapping is correct.
4.Any domain created before creation of Node Manager Service will not be accessible via node Manager(even after restarting node manager), solution is to run the WLST command “nmEnroll” to enroll that domain with the Node Manager.
Here are the steps to do "nmEnroll".
Example:
cd $BEA_HOME\user_projects\domains\<domain_name>\bin
setDomainEnv.cmd
java weblogic.WLST
wls> connect(‘weblogic’,'weblogic’,
‘t3://mymachine.mydomain:7001′)
wls> nmEnroll(‘C:\bea\user_projects\domains/<domainName>’, ‘C:\bea\wlserver_<version>/common/nodemanager’)
5.Start your Node Manager and look for the logs where it specifies the Domain Mapping Path.
6.Verify the domain path.
7.Now Start your Managed Server.

While editing a scanned pdf, Acrobat will not recognize the current font & change to very different font. How can I choose the font I want to match the current document?

While editing a scanned pdf, Acrobat will not recognize the current font & change to very different font. How can I choose the font I want to match the current document?

Thanks for answering. The version is XI.0.10. I just did the update yesterday hoping that I could now properly edit a scanned pdf document. Yes, it's happening on most all scanned documents. I followed your steps & found the list of fonts used in the document & then attempted to edit. The same occurs. When I type in a correction, I get an error alert... "the original font (in this case Fd 5805) is not available or can't be used in editing. Acrobat is using the font Minion Pro in its place."
When I select the text & right click as you suggested, my only choices are cut, copy, delete or select all, no "edit text".
I have no other options to choose another font. Thanks for any help you can direct my way.
Debbie
From: sukritd15 <[email protected]>
To: Deborah Karr <[email protected]>
Sent: Friday, February 13, 2015 5:35 AM
Subject: While editing a scanned pdf, Acrobat will not recognize the current font & change to very different font. How can I choose the font I want to match the current document?
While editing a scanned pdf, Acrobat will not recognize the current font & change to very different font. How can I choose the font I want to match the current document?
created by sukritd15 in Creating, Editing & Exporting PDFs - View the full discussionHi Deborah , I would like to know couple of things before I assist you further.1.Which version of Acrobat are you using ?2.Is it happening for all the scanned PDF' or any particular PDF? You can try these steps,Launch the scanned PDF >right click >Document Properties(from the drop down list) >Fonts(on the dialog box)>From here you will get the fonts used in that PDF . While editing the PDF ,select the text that are editing or typing in with the help of selection tool .After you select the text ,right click on the text and choose "edit text" from the drop down list .From there you will be able to choose the desired font . RegardsSukrit Dhingra If the reply above answers your question, please take a moment to mark this answer as correct by visiting: https://forums.adobe.com/message/7190881#7190881 and clicking ‘Correct’ below the answer Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: Please note that the Adobe Forums do not accept email attachments. If you want to embed an image in your message please visit the thread in the forum and click the camera icon: https://forums.adobe.com/message/7190881#7190881 To unsubscribe from this thread, please visit the message page at , click "Following" at the top right, & "Stop Following" Start a new discussion in Creating, Editing & Exporting PDFs by email or at Adobe Community For more information about maintaining your forum email notifications please go to https://forums.adobe.com/thread/1516624.

Itunes document manager pro will not open a document with .cwk extension. It will catch the document then error message states that it cannot open document. Can anyone tell me what Im doing wrong?

Itunes document manager pro will not open a document with .cwk extension. It will catch the document then error message states that it cannot open document. Can anyone tell me what Im doing wrong?

Forgive my ignorance but I have never hear of iTunes Document Manager Pro. If you mean Document Manager Pro, i was able to find that. Back to your problem, have you tried opening one of those files in the iOS iWorks apps? Form the quick read that I did about this, .cwk files can be opened by Pages, Numbers or Keynote, depending on what type of document that it is and those files can be read by Document Manager Pro, after properly saving them. I don't see that you can go directly from the .cwk file in Document Manager Pro without converting them first.
I took a very quick look at the app, so I may be a missing something about its capability.

SBS Manager Service will not start

I seem to have a bit of a problem the SBS manager service will not start at all. I have tried rebuilding the SBS Monitoring database and this did not help. This started happening a few months after a SBS 2008 to SBS 2011 migration, does anyone have any ideas
as I no longer get reporting or alerts.
At first I thought it might have had something to do with permissions but not too sure how to check and what to check apart from the common things, DB permissions, permissions on folders etc but I may have missed something?

Hi,
Regarding the current issue, since you have tried to rebuild the SBS monitoring database without any help, I suggest we could try to refer to the following article this time to see if it works.
FAQ: SBS 2011. The Windows SBS Manager service terminated unexpectedly
http://msmvps.com/blogs/bradley/archive/2013/09/19/the-windows-sbs-manager-service-terminated-unexpectedly.aspx
Best Regards,
Andy Qi
TechNet Subscriber Support
If you are
TechNet Subscription user and have any feedback on our support quality, please send your feedback
here.
Andy Qi
TechNet Community Support

Verizon Media Manager will not start automatically with Windows, even though it is set to do so.

Verizon Media Manager will not start automatically with Windows, even though it is set to do so. This started with the latest update. I see that the desktop icon for Media Manager now has a security shield on it, and it requires UAC confirmation when you start it, which I don't remember the old version doing.
One thing I noticed, msconfig.exe shows that "C:\Program Files\Verizon\McciTrayApp.exe" is set to start at Windows startup, but the desktop icon used to start Media Manager manually has a target of ""C:\Program Files\Verizon\Verizon Media Manager\Release\Verizon Media Manager.exe" Verizon Media Manager".
I don't remember what the previous version was, but this one is 9.4.86. It asked me if I wanted to update it a few days ago, and I said yes.
I am running Windows 7 Home Premium.
Solved!
Go to Solution.

Try setting the startup option to off and then to on again. It looks to be pointing to a wrong location.
Attached is a partial screen shot of my msconfig setting.
Attachments:
media manager startup cmd line.jpg ‏18 KB

Macbook will not sleep automatically

Hi
I've recently noticed that my Macbook will not sleep automatically, even when the power management is set to sleep at minimum (1 minute).
It will sleep if I do it via the menu, however if I walk away from the machine with the lid up, it just won't go to sleep.
I've tried switching everything off that could possibly be running in the background, tried from a new user account and also tried a power management and zapped the P Ram.
Up until a few weeks ago it's been running fine, don't know what's happened since, any help would be appreciated.
Thank you
Kiran

mscpro
Thanks, i've pasted below some of the text that was shown in 'Console', the last line was repeated several times so i've only copied it once.
I have no idea what this means, except there is some sort of error, how would you suggest I proceed.
Mac OS X Version 10.4.11 (Build 8S2167)
2008-05-28 06:56:38 +0100
2008-05-28 06:56:38.801 loginwindow[67] FSResolveAliasWithMountFlags returned err = -43
2008-05-28 06:56:39.735 SystemUIServer[83] lang is:en
2008-05-28 07:04:44.405 SyndicationAgent[216] WARNING: BestCalendarDateFromString - can't interpret: 'Tue 27 May 2008 22:26:15 -800'
thanks
Kiran

I installed a new wifi router and airport will not connect automatically to it. It sees the network but will not connect unless I tell it to.

I installed a new wifi router and airport will not connect automatically to it. It sees the network but will not connect unless I tell it to. I can't find anywhere in the utility or network preferences that will allow me to choose this router as the default. How do I fix this? BTW I'm using Lion.

Are there any previous networks that you have used that have the same password as Molly? YES
Using System Preferences > Network > AirPort Advanced again, you need to remove any listings of previous networks that used the same password as Molly. Click the name of the network and click the - (minus) button at the bottom of the list of connections.
Also delete any other networks (except Molly at the top of the list) that might have used the same name...Molly in the past.
Delete any other networks that you no longer need so that your Mac will search for networks more quickly
Click OK, then click Apply
Open KeyChain Access and look for a listing of any old networks that you no longer need. Click to highlight the name of the network, then click the Delete Key on your computer.
Then look for any old networks that might have used the name Molly in the past and do the same for them.
Then look for any old networks that might have used the same password as the password for your "new" Molly network and delete them in the same way
Click the KeyChain Access menu just next to the Apple icon in the upper left corner of the computer screen
and then click KeyChain First Aid
Enter the main administrator password for the Mac you are using and highlight the Repair button. Then click Start. You will see a message that repairs have been completed
Quit Keychain Access
Power down the entire network...all devices...order is not important
Power up the modem first, then your main router, the other devices one at a time
Log on to Molly and see if the Mac remembers it after a few tries. If not, I'm afraid that you will need to change the name of the wireless network and password on your router due to corruption issues on the Mac. You have done everything possible without re-installing the complete operating system.

Itunes will not start automatically when iphone plugged in

itunes will not start automatically when iphone is plugged in. it used to. now it turns on iphoto but not itunes. the option to check "open itunes when this iphone is connected" is ghosted and cannot be selected.
i have ios 5 now, but it also did this with the previous os.

Hi billm1013,
I'm sorry to hear you are having these issues with your iPhone. If your iPhone isn't being recognized in iTunes, and/or iTunes isn't responding to your mouse when the iPhone is connected, you may find the troubleshooting steps outlined in the following article helpful:
If you don't see your connected device in iTunes for Mac - Apple Support
Regards,
- Brenden

After Upgrade, Windows Service will not start automaticly

I just upgraded from 10.2 to 10.4. When I did the Windows File Service, will not start automaticly. I can start it manually, after a reboot. Any idea on how to fix this?

I am having the same problem on a clean install of Server 10.4.10, AFP & Web starts automatically on restart, but not Windows Service. This is the first time I have run into this, it starts fine on all other servers I administer. Then entry in /etc/hostconfig for SMBSERVER is set to "-YES-", there is no errors or messages of any kind in the console or system log, it just won't start.
This complicated with the problem I am having on the same server where I cannot connect via ARD after reboot without someone there physically plugging a monitor into the video port first (another open post I have - http://discussions.apple.com/message.jspa?messageID=5850246#5850246 ). So, doing maintenance at off-hours is almost unworkable.

SunONE CS 5.1.1 HTTP Service will Not Start Automatically

Hello,
I have just upgraded from iPlanet Calendar Server 5.1 to SunOne Calendar Server 5.1.1. (great improvement). However, the HTTP service will not start automatically on boot anymore. But after the boot sequence, I can start in manually. There are no errors posted to the Event Log so I am not sure what exactly is happening here. Maybe an ICS.CONF setting? I am doing this on Windows NT Server 4.0, SP6a. Any help would be great - thanks.

This is due to the fact that the directory server was not ready when the calendar needed it. I assume the directory server is running on the same machine as the calendar server.
What you have todo is the following :
you must create a dependancy between the http NT service and the LDAP NT service
- run regedt32.exe
- goto HKEY_LOCAL_MACHINE
- goto \system\currentcontrolset\services\iplanetcalendarhttpservice5
- you will see that this entry has alread an attribute with the name DependOnService
- click on it, and it will open
- add below tcpip the name of the service of the ldap. This service name can be found in the same
\system\currentcontrolset\services\
tree and begins with slapd-<instance-name>
when you reboot now, the http will wait until the LDAP has succesfully started before starting HTTP.

I'm trying to sync Outlook calendar (office 2010?win 8) with my iphone 4s. All works well when running control panel manually but it will not run automatically after that. Anyone got any ideas

I'm trying to sync outlook calendar and contacts via icloud control panel. Everything works when control panel is run manually but it will not run automatically after that. Anyone got any ideas

I am having a very similar problem. Until 12 hours ago, I was using my recently replaced 4s (with iOS7) flawlessly, receiving emails and calendar info from Exchange (Outlook 2010). But starting last night, it all stopped. I have deleted and added the account several times, tried making simple changes (considering whether the username is case sensitive, or not, etc.) and cannot fix it. I have iOS 7.04. Interestingly, the first time I changed the case to lower case, it seemed to respond immediately, and downloaded many emails with no sender, no content, and with a 12/31/69 date. Yes, 1969. And then nothing happened. Help please!

When I start the browser my gmail will not open automatically, I have to sign in again even though stay sign in is checked

I had to reinstall Firefox and now my mail will not open automatically when I start Firefox

''GMail entire message content missing (blank) after header title''
In Firefox, if you have "Adblock Plus" extension.
# "Ctrl+Shift+F" Preferences (or right click on ADP symbol, and choose preferences)
# 'Filters' menu > "'''Update all subscriptions'''"
reference: ''https://support.mozilla.com/questions/896267''

Ouput type with medium '9' not determined automatically

Hi,
I have the following problem.
At the site I'm currently working I have to trigger a workflow from the output fro sales orders.
So I have set up the output type with medium '9' ('Events- SAP Business Workflow').
In the condition maintenance ( VV12 ) I have added the object type as well as the event that is linked with the object type and triggers the workflow.
I have tested the workflow and it works fine. ( bpth trigger as well as the functionality ).
The problem however is that the output type is not determined automatically any longer in the transaction to create / change sales orders ( VA01/VA02 ). In the determination log I see the message that the object type send to output determination is empty ( while in VV12 I filled it in (=VBAP)! ) and therefor the system is not able to check that the event is correct ( he shows the correct event though ! ).
When I manually enter the output type, he accepts it but does not copy automatically the event ( he fills in the object type VBAP though ! ) in the communication window. When I enter the event manually, he accpets this again and everything works fine.
So the major question that I have is why doesn't he default this automatically ( object type and event ).
Can somebody help me out here ?
When I use medium '1' (print) in the condition record, the automatical determination works fine.
So it definatelly has something to do with the fact that I enter medium '9' in my condition record.
Thanks in advance.
Erwin

Hello Erwin,
I know this is an incredibly old post, but I am wondering if you found a resolution to this issue. I have the same issue and cannot determine why I can see the enter in NAST for an output resulting from a condition record set as medium 9 with timing of 3. If I am in display mode of the sales order I can see it and also see the record in NAST. Like you, if I change the medium to Print, it proposes as expected in VA01, VA02, VA03. If I have the medium of 9, and change the timing to 4, my workflow process executes as expected.
Please let me know if you have any thoughts on how to resolve.
Thanks!
Jan

HECess on CVD amount not determined automatically in MIGO

Hi,
We are using ECC 6.0 and TAXINN.
Condition type for HECess on CVD is 'J1CV'.
CVD amount, ECess on CVD and Additional Custom Duty amount are determined automatically in MIGO.
But HECess on CVD amount not determined automatically in MIGO.
Regards,

Make sure you and configured all the Account determination settings in Logistics - General--Tax on Goods Movements-India-Account Determination. For GRPO ETT....
And also check you had maintained the default settings for import--Logistics - General-Tax on Goods Movements-India-Basic Settings-Determination of Excise Duty-Maintain Excise Defaults...
and check the sub transaction for import is maintained or not.....................

While TO creation SU management no will not determined automatically

Similar Messages

Maybe you are looking for