While transfering to flash drive I get this message Could not find this item,no longer located in I:

Hp touchscreen model #310-1125y

Hi,
This is an Explorer error, please use the following methods to fix:
    http://answers.microsoft.com/en-us/windows/forum/windows_7-files/error-could-not-find-this-item-this...
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Similar Messages

  • I formatted my macbookpro and followed the usual instructions to re-install but I get a message : Could not find installation information for this machine. This was at the OS X Utilities.My macbook is now blank.

    I formatted my macbookpro and followed the usual instructions to re-install but I get a message : Could not find installation information for this machine. This was at the OS X Utilities.My macbook is now blank.

    Try booting into Internet Recovery mode (booting whilst holding down the command, option and R keys). It will take a while to load as you're booting from Apple's servers across the Internet.
    Once there, use Disk Utility to erase the "Macintosh HD" partition. After the drive is formatted try reinstalling the OS.
    Good luck,
    Clinton

  • Why this message "Could not find layout Default Echo GB"

    Why am I getting the message "Could not find layout Default Echo GB"  i.e. no Reverb effects?

    I get the same message and it would be interested if others have the same issuesthat is general bug
    The new GB 10.0.3 now lets you edit the Master Tracks Effects (Reverb and Echo), the legacy ones from GB11. However, when you click the Edit button at the bottom of the Plugin area on a Track, the Smart Controls window switches to to the Master Track and selects the (new) Effects tab. And this is where it gets stuck. It seems that it can't find the Plugin Settings. Maybe a file path issue.
    Anybody had luck to accessing those settings?
    Hope that helps
    Edgar Rothermich
    http://DingDingMusic.com/Manuals/
    'I may receive some form of compensation, financial or otherwise, from my recommendation or link.'

  • On a new setup I get error message "'could not activate this table (3001)''

    Hi,
    I am busy setting up my new playbook and get an error message on the software update screen: "'could not activate this table (3001)'' please try changing your settings.
    What settings am I meant to change?
    There is a button for settings and when I press this, the playbook takes me back to the connect to WI-FI screen. The WI-FI screen shows that I am currently connected. When I click on hotspot setup, the screen comes back and says I am already connected to the internet.
    Can anybody please assist me to complete my setup so that I can start using the playbook?
    Looking forward to your feedback
    Thanks a stax

    Or, you can find a local UNsecured hotspot not requiring a login or password. Like a McDonalds.
    1. If any post helps you please click the below the post(s) that helped you.
    2. Please resolve your thread by marking the post "Solution?" which solved it for you!
    3. Install free BlackBerry Protect today for backups of contacts and data.
    4. Guide to Unlocking your BlackBerry & Unlock Codes
    Join our BBM Channels (Beta)
    BlackBerry Support Forums Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • Getting  error message "Could not find XObject named 'n2'" in Adobe 8

    Hello,
    I have developed one component in VC++ which Signs PDF files.
    But when i opened signed file(in Adobe 8), I am getting one alert saying
    "Could not find XObject named 'n2'"
    can any one tell me what's wrong in my Signed PDF file.
    Origninal File is
    http://www.2shared.com/file/4704539/19fa9557/Test.html
    And Signed File is
    http://www.2shared.com/file/4704538/6efda5c1/Signed-Test.html
    Thanks in Advance

    Hi all
    HP does have an automatic update feature for its computers. Maybe that is activated. See if there is something like an HP Update in your Startup programs under msconfig. I usually disable most everything in the Startup section anyway.
    oto kiralama
    kiralık oto
    araba kiralama
    minibüs kiralama
    araç kiralama
    kiralık araba
    kiralık araç

  • I can not access the internet through Nightly because of this message : COULD NOT FIND THE MOZZILLA RUNTIME.

    After i updated the browser i can not access the internet. Can you help me please?

    Hello LOUISE80, try a ''Clean reinstall''. This means you remove Firefox program files and then reinstall Firefox. Please follow these steps:
    '''Note:''' You might want to print these steps or view them in another browser.
    #Download the latest Desktop version of Firefox from https://www.mozilla.org/en-US/firefox/all/ and save the setup file to your computer.
    #After the download finishes, close all Firefox windows (click Exit from the Firefox or File menu).
    #Delete the Firefox installation folder, which is located in one of these locations, by default:
    #*'''Windows:'''
    #**C:\Program Files\Mozilla Firefox
    #**C:\Program Files (x86)\Mozilla Firefox
    Now, go ahead and reinstall Firefox:
    * Double-click the downloaded installation file and go through the steps of the installation wizard.
    * Once the wizard is finished, choose to directly open Firefox after clicking the Finish button.
    More information about reinstalling Firefox can be found [[Troubleshoot and diagnose Firefox problems#w_5-reinstall-firefox|here]].
    <b>WARNING:</b>Do not use a third party uninstaller as part of this process. Doing so could permanently delete your [[Profiles|Firefox profile]] data, including but not limited to, extensions, cache, cookies, bookmarks, personal settings and saved passwords. <u>These cannot be easily recovered unless they have been backed up to an external device!</u> See [[Back up and restore information in Firefox profiles]]. <!-- Starting in Firefox 31, the Firefox uninstaller no longer lets you remove user profile data.Ref: Bug 432017 and https://support.mozilla.org/kb/uninstall-firefox-from-your-computer/discuss/5279 [Fx31] Windows uninstaller will no longer offer the option to remove personal data -->
    Thank you.

  • "could not find this item"

    I have a snow server resharing a folder on an xsan volume via AFP and SMB.
    Windows 7 clients trying to copy files from the share are getting the error "could not find this item" "This is no longer located in... Verify the item's location and try again."
    Any ideas?

    https://discussions.apple.com/thread/2249820?start=0&tstart=0 had my resolution

  • Can not delete file. Error is "Could not find this item".

    I get the following error when trying to delete a file:  "Item not found".  This is a Word 2007 document that would not save properly so I saved it with a different name.  Now I can't delete the original file.
    The body of the error states "Could not find this item.  This is no longer located in... . Verify the item's location and try again.

    Hi,
    I'm having exact the same problem with a file with a long name, to delete, move, rename, attribute change, etc. I deleted the file, which I receive the confirmation. However, the file is still there, with zero bytes and no extension. When I try
    to delet, move or change the file, I get the error "Could not find this item, This is no longer located in xxx. Verify the item's location and try again."
    I tryed everything: Using DOS, there's no 8.3 name format; In safe mode; chkdsk and sfc. Nothing worked.
    I also tryed the tricks in http://www.sevenforums.com/general-discussion/27924-could-not-find-item-when-deleting-files-3.html
    http://forums.techarena.in/vista-help/1038943.htm
    Without success.
    I took some more time and found this tool on the net "DelinvFile". It works perfectly, after trying EVERYTHING!!!.
    I Have Windows 7 professional 64bits and NTFS.
    Thank you very much.
    Thankyou Thankyou Thankyou Thankyou......... We are almost bald tearing our hair out over this issue and how to fix it.     Delin File WORKS...... At the cost of about 28 bucks well worth it.............. Good onya mate............

  • When insert my lexar USB flash drive I get the message that the disk was not readable by this computer.  It has worked previous to this and I do not want to lose the data by reformatting the drive.  How can I reformat this drive and not lose my data?

    When insert my lexar USB flash drive I get the message that the disk was not readable by this computer.  It has worked previous to this and I do not want to lose the data by reformatting the drive.  How can I reformat this drive and not lose my data?

    You can't reformat it and not wipe everything on it.
    Have you tried a different USB port?
    Only other option, back it up on a different computer.

  • When I try to use the refine edge command I get this message could not complete the refine edge comm

    when I try to use the refine edge command I get this message could not complete the refine edge command because of programe error

    Quit the editor, then restart it while holding ctrl+alt+shift (command+option+shift on a mac). Keep the keys down till you see a window asking if you want to delete the settings file. You do.

  • TS1372 I am trying to restore my ipod, and get a message: "could not restore ipod because it could not be unmounted."  What does this mean? And what do I do about it?

    I am trying to restore my ipod, and get a message: "could not restore ipod because it could not be unmounted."  What does this mean? And what do I do about it?

    It sounds like your PC or Mac's internal HD is full. You need to delete some data or move it to an external hard drive or storage device of some sort before you'll be able to successfully complete the restore.
    B-rock

  • When trying to update, I get the message: Account not in this store,...switch to the Canadian store.  How do I do that?

    When trying to update apps, I get the message:  "Account not in this store,...switch to the Canadian store before purchasing"  How to I switch, and how did it even get changed to US store?  I don't remember changing anything, and I used to be able to update, no problem..  I have synced with my computer for music - could it have happened then?  I changed on the computer to Cdn site, but will it not go to the iPhone automatically?

    On you iPhone go to settings-iTunes &amp; AppStore.
    Tap user name, sign out.
    Log back in with your apple ID and password.
    That should fix the problem

  • When I try to paste an CCI file into  a PSD, I get this message-   Could not complete the Paste command because the ICC profile is invalid. I need the layer to be an editable smart object! What's the solution?  Ron

    When I try to paste an CCI file into  a PSD, I get this message…   Could not complete the Paste command because the ICC profile is invalid.
    I need the layer to be an editable smart object! What's the solution?
    Ron

    I received the file from my client. However, last week I had no trouble pasting the same file into a PSD file, as a smart object.
    The color file is a label mechanical, which I place into a PSD file of the product. These are used for print ads and web graphics. The color is very critical and has worked really well for the last 4 years.
    I have used the default color settings in Creative Suite and its been working fine. They are in synch and, I have no idea how to re-assign the color profile. I’m a graphic Designer, color correction is not something I would do normally.
    Ron

  • When I try to open a file in photoshop CS, Elements or Lightroom I get the message "Could not complete request because it is not the right kind of document"  This just started happening today.

    When I try to open a file in photoshop CS, Elements or Lightroom I get the message "Could not complete request because it is not the right kind of document"  This just started happening today. The only thing I have done differently is change my file handling to raw + jpeg on my Nikon 7100. 

    I downloaded camera raw 8.7 and I am now able to open my raw and jpeg files.   Thanks

  • On mac yosemite, when trying to install my own brushes, I get error message: "Could not load the brushes "blahblah.abr" because the file is not compatible with this version of PS" (PS CC 2014)

    Need help-
    On my mac with yosemite, when trying to install my own brushes, I get error message: "Could not load the brushes "blahblah.abr" because the file is not compatible with this version of PS" (PS CC 2014) ????

    Thank you station_two but I did install them in my
    applications>adobe>presets>brushes and still I get this error message......
    On Tue, Dec 2, 2014 at 6:20 PM, station_two <[email protected]>

Maybe you are looking for