While trying to connect / configurate a second airport express it has suddenly can´t be found by the computer/ airport express manager. Any suggestions to how I can "find" it again?

I have tried to connect a second airport express to my Mac. But the configuration was interrupted and now I can´t find the second airport on the Airport Express manager display. Although I find it on network/ system settings. I appriciate any suggestions!

Hold in the reset button on the AirPort Express for 7-8 seconds, then release and allow 40-45 seconds for a restart to a slow, blinking amber light. Then reconfigure the device again.
You can also temporarily connect an Ethernet cable from your computer to the Express to establish a direct connection for the setup, rather than using wireless. Once you have the Express configured, you can disconnect the Ethernet cable.

Similar Messages

  • I plugged in my brand new nano to my husbands desktop to get it registered, but had a problem mid way through when I tried to used an apple login that already existed.  Now it's not registered and the computer won't recognize my device.  How do I fix this

    I plugged in my brand new nano to my husbands desktop to get it registered, but had a problem mid way through when I tried to used an apple login that already existed.  Now it's not registered and the computer won't recognize my device.  How do I fix this?

    iPod not recognized in 'My Computer' and in iTunes for Windows
    Call U.S. iPod and Mac technical support: 1-800-APL-CARE (1-800-275-2273) to register your iPod Nano.

  • When I turn on my iphone4s, the apple logo will show for a few seconds, and it will suddenly fade off to a blank screen, and not start up. It will then restart by itself, and the cycle repeats. Any suggestions on how I can troubleshoot this problem?

    Hi all,
    I need help with my iphone4s.
    When I turn on my iphone4s, the apple logo will show for a few seconds, and it will suddenly fade off to a blank screen, and not start up. It will then restart by itself, and the cycle repeats. Any suggestions on how I can troubleshoot this problem?
    What seems to be the problem here?
    thanks and regards
    Wan

    Wanlucg wrote:
    When I turn on my iphone4s, the apple logo will show for a few seconds, and it will suddenly fade off to a blank screen, and not start up. It will then restart by itself, and the cycle repeats.
    Make sure you have the Current Version of iTunes Installed on your computer
    iTunes free download from www.itunes.com/download
    Then See Here  >  http://support.apple.com/kb/HT1808
    You may need to try this More than Once...  Be sure to Follow ALL the Steps...
    Take your time... Pay particular attention to Steps 3 and 4.
    After you have Recovered your Device...
    Re-Sync your Content or Restore from the most recent Backup...
    Restore from Backup  >  http://support.apple.com/kb/ht1766

  • I have a the Spring 2011 iMac and I am looking to connect both my Bose Companion 2's with my new Companion 20's together to have one single audio system, any suggestions on how this can be done?

    I have a the Spring 2011 iMac and I am looking to connect both my Bose Companion 2's with my new Companion 20's together to have one single audio system, any suggestions on how this can be done?

    FIxed my problem!
    After years the problem was solved somply!
    Go to System preferences
    Go to Ethernet
    Go to Advance
    Go to Hardware
    The just make the changes like in the pictures below

  • Trying to rent movie from Apple TV. Message states a valid address is necessary to purchase. We have purchased about 15 show in the last month along. Any suggestion on how to update valid email address

    trying to rent movie from Apple TV. Message states a valid address is necessary to purchase. We have purchased about 15 show in the last month along. Any suggestion on how to update valid email address.

    I got the same error and can't get it to work.  My email and home address have not changed in the 3 years I've been using this device, my credit card info is up to date and my most recent rental was 2 days ago yet I get the error message on both the Apple TV and in iTunes.  I don't understand what the issue is, nothing is invalid.

  • I bought this laptop second hand and do not have the start up disk or previous password to update my software - any suggestions on how I can update my computer?

    I bought this laptop second hand and do not have the start up disk or previous password to update my software - any suggestions on how I can update my computer?

    Try here:
    iTunes for Windows Vista or Windows 7: Troubleshooting unexpected quits, freezes, or launch issues
    It has a link for XP

  • When I open my newsstand, it only stay open for a second then shuts down.  It started after I updated my software to 6.0. Any suggestions for how to fix this?

    When I open newsstand it only stays open for 1 second then shuts down.  This started happening after I upgraded to 6.0. Any suggestions for how to fix this?

    Try quitting Newsstand completely - double tap home button, delete it from the multitasking shelf - then launch it again.

  • While trying to set up i cloud some of my contacts have been wiped out and all the contacts are showing up as numbers only, how to i fix this?

    While trying to set up ICloud some of my contacts have been wiped out and all contacts are showing up with number only
    How do I recover the lost contacts and get contact names to show instead on just number?

    Shiv1611 wrote:
    Though i am still gona try using the same Itunes. Will same Itunes support two apple ids.
    That depends on what you mean. If you mean two iTunes Store accounts, no. Only one Apple ID can be logged into the iTunes Store at a time and if automatic download, iTunes Match or re-downloading of content is used the ID can not be changed for 90 days.
    Shiv1611 wrote:
    So i guess if i solve my goof up on creating different apple IDs and setting her phone as a new one .. according to you that shall do the trick.
    But i have a question here in that case what happens to all the applications that have been purchased on my Id ? Wont i be needing them to be purchased/downloaded again in the new id?
    If you previously had been using the same Apple ID for iTunes Store purchases for both of you there is no reason to change what you've been doing. If this is your wife's first iPhone, and you want to share the iTunes Store account just don't use the new Apple ID you created. As long as there are no purchases on it there's nothing to worry about.

  • While trying to restore os x and erase content, some problem about voice software came up and the computer asked me to restart and try again by clicking restart button. When I did this, the machine went to a gray start up screen and will not progress.

    While trying to restore os x and erase content on my MacBook pro, some problem about voice software came up and the computer asked me to restart and try again by clicking restart button. When I did this, the machine went to a gray start up screen with an apple and will not progress. I've waited more than 30 minutes and tried restarting again by holding the power button. Also, restore cd 1 will not eject so the computer will no longer move past the gray screen with spinning circle. Restore CDs had never beeused and were still in packaging in the original box. Ran hardware test just to check, and it came back as normal. Now what? I live nowhere near a genius bar :(

    computer asked me to restart and try again by clicking restart button.
    That's called a kernel panic...
    Since the install disc won't eject, try starting up while holding down the C key. If the Mac won't boot while holding down the C key, try ejecting disc by either holding down the mouse while starting up or holding down the Eject key while starting up.
    Try booting from your install disc so you can run Disk Utility in case the startup disk needs repairing.
    Insert your install disk and Restart, holding down the "C" key until grey Apple appears.
    Go to Installer menu and launch Disk Utility.
    (In Mac OS X 10.4 or later, you must select your language first from the installer menu)
    Select your HDD (manufacturer ID) in the left panel.
    Select First Aid in the Main panel.
    (Check S.M.A.R.T Status of HDD at the bottom of right panel. It should say: Verified)
    Click Repair Disk on the bottom right.
    If DU reports disk does not need repairs quit DU and restart.
    If DU reports errors Repair again and again until DU reports disk is repaired.
    When you are finished with DU, from the Menu Bar, select Utilities/Startup Manager.
    Select your startup disk and click Restart
    While you have the Disk Utility window open, look at the bottom of the window. Where you see Capacity and Available. Make sure there is always 15% free space.
    What is a kernel panic
    Mac OS X Kernel Panic FAQ
    Resolving Kernel Panics

  • I am trying to figure out how I can get my library transferred to the Honda Accord 16gb hard drive?  I have purchased music of off I tunes and do not have the physical CD.  Anybody with any suggestions on how this can be done?

    I am trying to figure out how I can transfer my library to my new 2014 honda accord that has an internal 16gb hard drive.  The manual for the car says that it needs to be original CD's but I have purchased alot of the albums/songs I have from I tunes therefore not having the original CD.  Can someone help me with this as I dont want to load each CD into the player to record and have some albums that I purchased off of I tunes that I would like to be on the hard drive.
    Thanks Any Help is appreciated.

    If Honda says you need the original CDs, you need the original CDs.

  • I accidentally lost my photos from my iphone as I was trying to sync into my mac.  I accidentally clicked restore.  Any suggestions on how I can get my photos back?

    Hello,
    I accidentally clicked restore when I was trying to sync my photos from my iphone to my mac computer.  I lost them all and it made me sick.  Does anyone have any ideas or suggestions on how I might be able to retrieve them? I was up until 4am trying to figure this out.
    Thanks!!!
    Kelly

    If you restored the iPhone then the photos are gone. Sorry.
    Next time you take photos on your iPhone, transfer them to your Mac as soon as it's convenient.
    iOS: How to transfer or sync content to your computer

  • Why do i get an error message while trying to connect to airport network?

    i just installed an airport card in an iMac G5, archived and installed Tiger, updated everything (while connected via ethernet) and now when i'm trying to connect to the wi fi network in the house i keep on getting a message saying there's an error while trying to connect to the network. i have a PowerMac G5 connected wirelessly with no problems, i have an iBook connected to an Airport Express via ethernet and a Mac Mini connected to an ethernet port on the Airport Extreme Base Station. there's a DSL modem connected to the other ethernet port on the Base Station. occasionally the iMac will connect to the network, but that's once every few restarts or log outs.
    help.

    i called apple support and they said after trying tons of software related tweaks and such that it's probably the airport card and to see if it's in correctly and if it is just exchange it for a new one.

  • An error occurred while trying to connect to the provider

    Hi Experts,
    I have written a custom connector to the UWL. This is first time I am working on this concept. After writting I was deployed the PAR into the portal and configured UWL settings. But When I check the UWL it is showing "An error occurred while trying to connect to the provider" in details it is showing " Time out occured. Time taken is more than 30 seconds"
    Can you please tell me what might be the problem.
    Thanks a lot

    Hi Xinjiang,
        Thank you for your reply. I am facing an issue when I Login and open 'Work Overview' screen the warning message shows as 'An error occurred while trying to connect to the provider' when I click the Detail button I am seeing 'Actioninbox' status 'timeout' message 'Time out occurred. Time taken is more than 30 seconds'. My requirement is to stop display this warning message. I have read many thread and some of them answer, I tried the below suggested thread but still i am facing the issue.. Your help will be really appreciated...
    /thread/770521 [original link is broken]
    Best Regards,
    Jr.SRM

  • HT4436 When trying to sign in I keep getting the error message, "iCloud encounterd a error while trying to connect to the server". How can I get signed in?

    When trying to sign in to iCloud, I always get the message, iCloud has encountered a error while trying to connect to the server. How do I get in????

    Hello,
    Try following step and check if issue gets resolved or not.
    Find Acrobat.exe on your computer.  Right click the program and click 'Troubleshoot Compatibility'.  Set the compatibility to Windows XP service pack 3.
    Regards,
    Anoop

  • An error occurred while trying to connect to a Web service, when InfoPath web enabled form loads.

    Hi Everyone,
    I am getting an error message: An error occurred while trying to connect to a web service, when my InfoPath form tries to load.  The last few days, it only spits this error message in the morning and around 12pm-1pm it resolves itself and the form loads
    fine the rest of the day, oddly enough. 
    A few things about my form:
    1). It is web enabled
    2). The form submits to a form library on the SP server
    3). I use the UserProfileService data connection in the form to auto-populate a few fields
    4). I use a udcx file with correct language stored in the root of the site collection in the data connection library
    5). The form has been working fine until a few days ago
    I noticed while in Central Administration, that the User Profile Service Synchronization is Stopped.  Not sure if this is causing some or all of the problem. If I need to start it I will need to contact my farm administrator to do this, since I do not
    have the service account information.
    Also, I looked thru the log files on the SharePoint server and found the following by searching for the Correlation ID shown when the error comes up, I won't put in everything just the important messages.
    Schema file was already loaded: BuiltInActiveXControls.xsd
    FormServer Partial Trust - Proxy operation invoked in the SHIM process.
    FormServer Partial Trust - Invoking proxy operation for Web service adapter failed with exception Operation is not valid due to the current state of the object. for Url=https://<SP URL>/_vti_bin/UserProfileService.asmx
    Data adapter failed during OnLoad: The custom code in the form cannot be run. This functionality may be deactivated on the server. For more information, contact the server farm administrator.
    The following query failed: GetUserProfileByName (User: , Form Name: Expense Report, IP: , Connection Target: <SP URL>/Data Connections/GetUserProfileByName.udcx, Request: , Form ID: urn:schemas-microsoft-com:office:infopath:Expense-Report:-myXSD-2014-04-11T21-06-32
    Type: DataAdapterException, Exception Message: The custom code in the form cannot be run. This functionality may be deactivated on the server.

    Hi B.,
    You are on the right track. I recommend that you first get the User Profile Synchronization Service started because that itself could be the root cause of the issue.
    If that doesn't fix it then focus your attention on the GetUserprofileByName data connection. I always use my secure store ID for this connection. I add the ID by editing the udcx file and then publishing it again.
    Hope this helps.
    Daniel Christian (MCTS)

Maybe you are looking for