While trying to create a Quest.template in eRec portal"Internal error occur
I was trying to create a questionnaire and define scales for an application wizard in eRec portal, while trying to do I am getting "An internal error occured.Please try again.
Regards,
Selva
HI,
Sorted the issue.The questionnaire and scales were defined and then should have followed the steps:
Set up Categories
Update Categories &
Transport categories.
The above 3 should have been followed to other system in which the TR has been made.Even though when you execute TR categories you will not get the request to save but follow the steps. If these steps are followed the error will not occur.
While transporting any configuration changes wrt eRec.plz.check the above is followed and captured in the TR.
Regards,
Selva
Similar Messages
-
I am trying to create a community addition, but just keep getting *Error occurred while saving your data.
Trying to add the following community addtion for: http://technet.microsoft.com/en-us/library/cc755631(v=ws.10).aspx
In the above website do NOT copy the command, you have to type it in. Webpage Error.
You can use both dsquery server –hasfsmo schema and dsquery server -forest –hasfsmo schema
The problem is, I believe, a hidden character in the command on this webpage which follows the Paste function and results in the error Unknown Parameter error.Hi John,
You might have better luck posting this in the library feedback forum here:
http://social.msdn.microsoft.com/Forums/en-us/home?forum=libraryfeedback&filter=alltypes&sort=lastpostdesc
It seems odd to me that the TechNet library feedback forum lives under the MSDN branding, but that seems to be the case.
Don't retire TechNet! -
(Don't give up yet - 12,575+ strong and growing) -
Trying to open a large PDF and receive "an internal error occurred" with Adobe Pro. X
Hello,
We have one user, she has Adobe Pro. X installed, that is having an issue opening a particular PDF that is 37 MBs in size. When she tries to open it up, she receives the "an internal error occurred" message. If she opens up another PDF that is in the same folder (all the PDFs is on the network share) that is smaller in size (less than 100 KB) it opens just fine. I checked for any Adobe updates and downloaded and installed the update(s) that it found.
After it's been patched, I rebooted and still have the same issue. Surprisingly nothing was found in my searches to help this....
Thoughts?Hi screener333,
Did you get any errors during Acrobat installation?
If Acrobat is crashing during first launch then it might be an issue with licensing as well.
Please check the performance by enbaling the root user account on Mac: http://support.apple.com/kb/ht1528
Regards,
Rave -
Could I get some help with this?
Hi Shelly,
Are you trying to log in to ExportPDF from Reader? If so, please make sure that you have the most current version by choosing Help > Check for Updates in Reader. You should be using version 11.0.07 (Mac OS) or 11.0.08 (Windows)--earlier versions caused this sign-in error that you're seeing.
Let us know how it goes!
Best,
Sara -
Error while trying to create tree using same EMP how to tutorial
Hi,
I get the following error while trying to create a sample tree similar to the one
posted in the how-tos web page.
The final query that creates the tree is also as follows
The Current Query shown in my apex window and the one on the howtos tutorial is as follows
select "EMPNO" id,
"MGR" pid,
"ENAME" name,
null link,
null a1,
null a2
from "RJOSEEMPCLUB"."EMP"
where DEPTNO = 1
The error is as follows
ORA-06502: PL/SQL: numeric or value error: character to number conversion error
Debug:
1: begin
2: wwv_flow_wiz_confirm.create_tree (
3: p_flow_id => :FB_FLOW_ID,
4: p_region_template => replace(:F4000_P112_REGION_TEMPLATE,'%'||'null%',null),
5: p_start_option => :F4000_P112_START_OPTION,
6: p_owner => :F4000_P112_OWNER,
7: p_table_name => :F4000_P112_TABLE,
8: p_id => :F4000_P112_ID,
9: p_pid => :F4000_P112_PID,
10: p_name => :F4000_P112_NAME,
11: p_link_option => :F4000_P112_LINK_OPTION,
12: p_link_page_id => :F4000_P112_LINK_PAGE_ID,
13: p_link_item => :F4000_P112_LINK_ITEM,
14: p_where => :F4000_P112_WHERE,
15: p_order_by => :F4000_P112_ORDER_BY,
16: p_page_id => :F4000_P112_PAGE_ID,
17: p_page_name => :F4000_P112_PAGE_NAME,
18: p_tab_set => :F4000_P112_TAB_SET,
19: p_tab_text => :F4000_P112_TAB_TEXT,
20: p_region_name => :F4000_P112_REGION_NAME,
21: p_tree_name => :F4000_P112_TREE_NAME,
22: p_tree_type => :F4000_P112_TREE_TYPE,
23: p_max_levels => :F4000_P112_MAX_LEVELS);
24: end;Hi Kart,
If you have the sample EMP table, the DEPTNO values are 10, 20 or 30.
Did you specify a root value for the tree?
Regards
Andy -
Application hangs while trying to create a socket
Hello,
We have a third party application that makes HTTP connections using a old version of HTTPClient. Recently we have run into problems where the application hangs as one thread seems to hang while trying to create a socket (thread dumps show the hang occurs in native code) and other threads end up waiting for this thread as they need to obtain a lock on HTTPClient.HTTPConnection. We found out that HTTPClient was not setting a timeout on the underlying socket (SO_TIMEOUT) and the relevant patch has been implemented in the hope that if the condition arises again the offending thread will be timed out and allow other threads to try and continue.
We will not be able to see if the patch works until Monday and I would like to understand the problem a little better if it fails. My question at what point will the socket timeout starting ticking? As our offending thread is waiting in native code is there a chance that the timeout will not be "active".
Also can anyone provide reasons for an application hanging while trying to create a socket and any suggestions for monitoring or mitigating this problem?
Thanks a lot.
Sun Solaris 5.8
JDK 1.4.1 b02It looks like our version of the JDK offer a connect method with a timeout value, I think this will do the trick.
-
Error while trying to create a new company
Hey All
I found an error while trying to create a new company.
the Error like - No matching Records Found - [ODBC -2028]
This can generate only database but not any tables in that database.
Please help me.
Thanking you
Hepil DoshiHello,
I would prefer local language instead of US english.....
My tips.
1. DID you tried to Not apply the UDO/UDF things?
2. Do not log in to the database, start from
3. Please post the error message itself....
4. If you are running on MS SQL 2005 server (not express) , You can start SQL profiler, and monitor the New Database creation.... you will see in profielr where is the error message and which tables / data is missing.
If i know well,
When you create a new company, the SBO-COMMON database is used to deploy the new database....
If you get stock, reinstall your sbo-common from the last applyied patch..... (Detach SBO-common, move the files another directory, and start upgarder.exe).
Regards,
J. -
Getting error while trying to create the push certificate...
I am getting the following error while trying to create a push certificate for the mdm from the apple site.
Certificate Signature Verification failed because the signature is invalid.
I am mdm vendor as well as the customer. I did the following steps.
openssl x509 -inform der -in mdm_identity.cer -out mdm.pem
openssl x509 -inform der -in AppleWWDRCA.cer -out intermediate.pem
openssl x509 -inform der -in AppleIncRootCertificate.cer -out root.pem
openssl req -inform pem -outform der -in customer.csr -out customer.der
created the plist_encoded file using a java program which uses the "SHA1WthRSA"
When i tried to upload the plist_encoded file to the apple site (https://identity.apple.com/pushcert/), it creates a file with the following error
{"ErrorCode":-80018,"ErrorMessage":"Certificate Signature Verification failed","ErrorDescription":"Certificate Signature Verification failed because the <a href=\"http://www.apple.com/business/mdm\" target=\"_blank\">signature<\/a> is invalid."}
Any help would be greatly appreciated....Please see the solution in (The Descriptive Flexfield With Application Name Receivables (AR) and Name Party Site Information (HZ_PARTY_SITES) Is Not Frozen [ID 743262.1]).
Thanks,
Hussein -
Issue while trying to create Sales Order from Inbound Idoc ORDER05
Hi All,
I am trying to create a sales order through an Inbound idoc ORDERS05 created out of a Purchase order. The header pricing conditions from the Purchase orders gets populated in E1EDK05 segment and this needs to go to the Sales order header conditions while trying to create the Sales order.
But when the fields are getting incorrectly mapped to the Sales order. Issue being, the segment E1EDK05-BETRG contains the condition value. But this fields gets populated to the KOMV-KWERT (condition value) screen field on the Sales order header conditions. But this should have got mapped to field KOMV-KBETR (Rate). If I look at the Purchase order, E1EDK05-BETRG is the field getting fetched from field KOMV-KBETR on the Purchase order. So this should have correspondingly got mapped to KOMV-KBETR on the Sales order as well.
This looks like a standard behavior. But if any of you have encountered this issue before please let me know if any Correction instructions are available for the same. If this some issue in Pricing conditions configuration, do let me know.Hi Paaavan
You can set a break-point include "FV45PFAP_VBAP_BEARBEITEN_VORBE" that is called by both the SAP Standard and BAPI where the data is prepared and checked in the internal table XVBAP. Compare both SAP standard VA01 and your 'Z' program for what may be different in XVBAP.
I think the problem my be with regards to the business_object number that is hardcoded in the standard function module. It has given me issues before and hence I tend to use the function module SD_SALESDOCUMENT_CREATE to create sales documents with.
Regards,
Marius -
I haven't backed up my computer in over a year. When I tried to back it up today, Time Machine says 'an error occurred while creating the backup folder.' When I check the side of the partition where I manually saved old photos and documents (including all the pictures from the year I studied abroad/traveled a bunch), the folders are there, but NONE of the files are.
Does anyone have any idea what the problem might be, or how I could fix it? I really don't want to lose all those photosSo you were doing a time machine backup to another partition on the same hard drive? Just trying to gather some information so i can provide a helpful response.
-
Bar Code entry while trying to create one through FB03
Hi Guru
We recently had techical upgrade to ECC6.0. While trying to create a barcode entry for a document through FB03 I am getting the following error message
oa280 - Bar code not active -system administration .
All the configuration are in place in OAC5,OBD2 . I couldnt able to find any relevant notes regarding to this issue . Can some one help me out in fixing this issue
Thanks
AuroarHi
I raised the question to SAP and they provided me the notes 173521 as suggested by you . But following this note will open bar code entry access for all user and for all accounting document which will be an issue . After few trial and error I was able to get an solution for this issue . I created an entry in oac5 with barcode active for object type and user specified and an another entry with barcode inactive for object type ,document type FIIInvoice and user . This enabled only the authorized user for bar code entry to make changes . One drawback is that it does allow permitted user for all document type
Thanks all for your suggestion
Regards
auroar -
Portal Runtime Error occurred when trying to create iView using template.
Hi,
When I tried to create an iView by Content Management through "Existing iView Templates", the Portal runtime error occurred.
(However, when I tried to create an iView through "Deployed Portal Archive" or "Web Dynpro Java Application", it was successful)
If you know the same error and the way to solve, please help me.
Best Regards,
Daisuke Ikari
It occurred below system environment.
Version: NetWeaver 7.0 SPstack18
OS: Windows 2003 Server SP2
RDBMS: Oracle 10.2.0.2
And the error log is below.
08:29_26/03/09_0002_6759950
[EXCEPTION]
java.lang.NoSuchMethodError: com.sapportals.portal.pcd.gl.PcdSearchControls.addExplicitAttributeCheck(Lcom/sapportals/portal/pcd/gl/IPcdAttribute;)V
at com.sap.portal.pcm.iviewserver.cache.TemplatesCacheSrv.getPCDCatalog(TemplatesCacheSrv.java:184)
at com.sap.portal.pcm.iviewserver.cache.TemplatesCacheSrv.refresh(TemplatesCacheSrv.java:589)
at com.sap.portal.pcm.iviewserver.cache.TemplatesCacheSrv.getTemplates(TemplatesCacheSrv.java:646)
at com.sapportals.admin.templateselection.panes.InitPane.getCatalogList(InitPane.java:206)
at com.sapportals.admin.templateselection.panes.InitPane.initTemplateList(InitPane.java:122)
at com.sapportals.admin.templateselection.panes.InitPane.processInput(InitPane.java:59)
at com.sapportals.admin.wizardframework.core.WizardInstance.doPost(WizardInstance.java:350)
at com.sapportals.admin.wizardframework.core.WizardInstance.doWizard(WizardInstance.java:174)
at com.sapportals.admin.wizardframework.core.WizardInstance.doWizard(WizardInstance.java:99)
at com.sapportals.admin.wizardframework.AbstractDynamicWizard.doContent(AbstractDynamicWizard.java:98)
at com.sapportals.portal.prt.component.AbstractPortalComponent.serviceDeprecated(AbstractPortalComponent.java:209)
at com.sapportals.portal.prt.component.AbstractPortalComponent.service(AbstractPortalComponent.java:114)
at com.sapportals.portal.prt.core.PortalRequestManager.callPortalComponent(PortalRequestManager.java:328)
at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:136)
at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:189)
at com.sapportals.portal.prt.component.PortalComponentResponse.include(PortalComponentResponse.java:215)
at com.sapportals.portal.prt.pom.PortalNode.service(PortalNode.java:645)
at com.sapportals.portal.prt.core.PortalRequestManager.callPortalComponent(PortalRequestManager.java:328)
at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:136)
at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:189)
at com.sapportals.portal.prt.core.PortalRequestManager.runRequestCycle(PortalRequestManager.java:753)
at com.sapportals.portal.prt.connection.ServletConnection.handleRequest(ServletConnection.java:240)
at com.sapportals.portal.prt.dispatcher.Dispatcher$doService.run(Dispatcher.java:524)
at java.security.AccessController.doPrivileged(Native Method)
at com.sapportals.portal.prt.dispatcher.Dispatcher.service(Dispatcher.java:407)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.sap.engine.services.servlets_jsp.server.servlet.InvokerServlet.service(InvokerServlet.java:156)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.sap.engine.services.servlets_jsp.server.runtime.RequestDispatcherImpl.doWork(RequestDispatcherImpl.java:321)
at com.sap.engine.services.servlets_jsp.server.runtime.RequestDispatcherImpl.forward(RequestDispatcherImpl.java:377)
at com.sapportals.appdesigner.appdesignerfw.TabContentComponent.doOnNodeReady(TabContentComponent.java:110)
at com.sapportals.portal.prt.component.AbstractPortalComponent.handleEvent(AbstractPortalComponent.java:388)
at com.sapportals.portal.prt.pom.ComponentNode.handleEvent(ComponentNode.java:252)
at com.sapportals.portal.prt.pom.PortalNode.fireEventOnNode(PortalNode.java:368)
at com.sapportals.portal.prt.pom.AbstractNode.addChildNode(AbstractNode.java:340)
at com.sapportals.portal.prt.core.PortalRequestManager.runRequestCycle(PortalRequestManager.java:642)
at com.sapportals.portal.prt.connection.ServletConnection.handleRequest(ServletConnection.java:240)
at com.sapportals.portal.prt.dispatcher.Dispatcher$doService.run(Dispatcher.java:524)
at java.security.AccessController.doPrivileged(Native Method)
at com.sapportals.portal.prt.dispatcher.Dispatcher.service(Dispatcher.java:407)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.sap.engine.services.servlets_jsp.server.servlet.InvokerServlet.service(InvokerServlet.java:156)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:386)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:364)
at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:1039)
at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:265)
at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175)
at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
at java.security.AccessController.doPrivileged(Native Method)
at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:104)
at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:176)Thanks for your help. Here is the xml
<PAREVAHRS>
<P_PROJECT_TYPE>Food Equipment</P_PROJECT_TYPE><P_PRJ_CATEGORY>Qualification</P_PRJ_CATEGORY><P_CPM_ID>658</P_CPM_ID><P_FROM_DATE>2007/03/01 00:00:00</P_FROM_DATE><P_TO_DATE>2007/03/31 00:00:00</P_TO_DATE>
<LIST_G_PROGRAM>
<G_PROGRAM>
<PROGRAM_CODE>0180</PROGRAM_CODE>
<PROGRAM_NAME>Food Equipment</PROGRAM_NAME>
<LIST_G_MGR>
<G_MGR>
<PROJ_MGR>Lamoreaux, Mr. David</PROJ_MGR>
<LIST_G_PRJ>
<G_PRJ>
<PROJECT_NUMBER>249400</PROJECT_NUMBER>
<LONG_NAME>KM-60, 100 & 150 BAH, ICE MAKE 249400</LONG_NAME>
<CUSTOMER_NUMBER>22460</CUSTOMER_NUMBER>
<CUSTOMER_NAME>HOSHIZAKI AMERICA, INC.</CUSTOMER_NAME>
<LIST_G_TSKEXP>
<G_TSKEXP>
<TASK_NUMBER>PO01START</TASK_NUMBER>
<EXP_TYPE>100 Labor - Chargeable</EXP_TYPE>
<EXP_DATE/>
<QTY>9.25</QTY>
<REV>0</REV>
</G_TSKEXP>
</LIST_G_TSKEXP>
<PRJREV>0</PRJREV>
<PRJQTY>9.25</PRJQTY>
</G_PRJ>
The PRJREV and PRJQTY is at the same level and they are either zero or non null values.
- Vasu - -
Keep getting an error message that reads, "LR An error has occurred while creating the book on Blurb" An error has occurred while trying to create texts and fonts. Pleas advise as Blurb has said that it's a LR issue.
Are you behind a firewall or double NAT??
What is the device that is immediately plugged into the main modem or router? Has that one been able to update?
It is plugged in of course isn't it.. no nasty join wireless anywhere??
The best way to work around these sort of problems is to simplify the network.. Plug each device directly into the main router.. by ethernet. You can trigger the firmware upgrade by wireless but use ipad or iphone version of airport utility and see what happens. -
Jdev hangs while trying to create deployment profile for EJB from ADF BC.
Hi,
I created some ADF BC and try to create the deplyment profile as EJB session Beans
however it is not saving and while trying to deploy it to satandalone OCJ I got some errors
atht classes EJB are missing.
Please advise.
Thanks
JOHello JO,
Is the version of your stand alone OC4J compatibile with JDeveloper you are using?
e.g.: JDev 10.1.3 is certified with OC4J 10.1.3
Did you install the ADF runtime ?
e.g.: from the menu, Tools -> ADF runtime installer -> stand alone OC4J
What is the exact error which is displayed ?
Stephan -
ORA-01422: while trying to create a job
Hi all,
WE need a help from you, group of experts
we are getting the following error
ORA-01422: exact fetch returns more than requested number of rows
ORA-06512: at "SYS.DBMS_ISCHED", while trying to create a job using the following code
BEGIN
DBMS_SCHEDULER.create_program
(program_name => 'FAILURE_MONITOR_PRG',
program_action => 'JOB_MGR.SPR_FAILURE_MONITOR',
program_type => 'STORED_PROCEDURE',
number_of_arguments => 1,
enabled => FALSE
DBMS_SCHEDULER.define_metadata_argument
(program_name => 'FAILURE_MONITOR_PRG',
argument_position => 1,
metadata_attribute => 'EVENT_MESSAGE'
DBMS_SCHEDULER.create_job
(job_name => 'FAILURE_MONITOR_JOB',
program_name => 'FAILURE_MONITOR_PRG',
enabled => TRUE,
auto_drop => FALSE,
start_date => SYSDATE,
event_condition => 'tab.user_data.event = ''FAILED''',
queue_spec => 'event_queue'
END;
Oracle allows us to create the job if the parameter values for enabled is "false" in the DBMS_SCHEDULER.create_job call. But we got the same error
when tried to enable the job using exec DBMS_SCHEDULER.ENABLE ('FAILURE_MONITOR_JOB');
ORA-01422: exact fetch returns more than requested number of rows
ORA-06512: at "SYS.DBMS_ISCHED", line 2751
ORA-06512: at "SYS.DBMS_SCHEDULER", line 1794
ORA-06512: at line 1
Please help us to solve this issue
Thanks,
Reghu
nullHi Ravi,
Thank you for your kind support
That issue has been solved. Problem was with the event queue and only for that particular job i mentioned in the first post (I was able to create other jobs with different Events using the same queue) . After recreating the event queue i am able to create the same job. I got the same error when I tired to drop the queue, and then I dropped the queue table itself. Do you have any idea about what might had caused the issue?
Thanks
Reghu
Maybe you are looking for
-
All, We have a scenario of procuring finished goods into Finished S location and from there directly do the PGI to customers in SD . This scenario we are not treating as a third party scenario , which shud be actually . In this case what will be the
-
Hi there Please can anyone advise? I have had a couple of transactions from my bank account, one for around £28, not from me, then there was a strange refund of £9.17! I have searched iTunes website for help with this, but can`t seem to find any he
-
Is there a download that will allow me to play videos requiring Adobe Flash?
Is there a download that will allow me to play videos on my iPad2 that require adobe flash?
-
Hello all, I am trying to find the actual table used by function module "BAPI_COMPANY_GETDETAIL". In another words, when you execute this function modue, from which table it gets the information. Can you guys please tell me how to do that? Regard
-
Missing a VM in Failover Cluster Manager
We did eventually cut the power when shutting down the second of the two hosts in the cluster, because it got stuck at some stage during shutdown. The reason we shut down was that there were problems piling up while we moved VMs between the two nodes