While trying to open iBooks in mavericks it is showing "Sign in to download from the iBooks Store" dialog box but not showing where to sign in and it is appearing continuously in infinite loop
whenever i try t open iBooks from my newly Updated OS Mavericks it asked me to sign in but there are no textbox or form where i can fill the credentials but it is giving me 3 options cancel, create new apple id and sign in when i click on sign in it reappears and the same thing happens for other two options also, i am not able to login into iBooks, Someone help me....
I'm having exactly the issue, but found that itvdoes not happen all the time.
It seems to be dependent on the network I am logged in.
Similar Messages
-
Mavericks will not download from the app store. It shows up under "other purchases" but the action button is grey and will not allow me to install, uninstall or redownload. I meet the system requirements but nothing is working. Any help would be appreciated!
There is nothing wrong with my iTunes, is more of the App store that I am concerned about. And I've tried the "Authorise this computer" yes it does download when using iTunes, but no luck with App Store. And, yes I am logged onto iTunes when doing purchases.
I find this really fustrating because the App store works fine on my ipod but once it comes to my macbook, it does not download. A few seconds later after I click on an app to download, the pop up message notifies me that the purchase cannot be downloaded.
Anyways, thanks for your suggestion. -
Can't open TurboTax 2013 because it was not downloaded from the App Store
I downloaded TurboTax 2013 directly from Intuit. When I launch it, I get the error message "This application cannot be opened because it was not downloaded from the App Store." It was not downloaded from the App Store because the App Store doesn't have the version I need. Now what?
I think you should use the new version for free turbotax. I have used turbo tax 2014 recently.
From Apple store you will defiitely get this software easily. -
i get an error message when trying to download apps from the app store. "Safari can not oprn the page because the address is invalid"
You can't use Safari to download iPad apps. Only use iTunes/App Store.
Cheers, Tom -
I have installed the most recent version of Snow Leopard on my MAC, and I am trying to install Mountain Lion from the Apple Store. It will not install, because it says I do not have 2GB of memory, even though I have over 200GB available. Please help.
Welcome to the Apple Support Communities
One thing is the memory, and another thing is the hard disk space. You are telling me that you have 200 GB of free space on the hard disk, but the App Store is telling you that you have to install 2 GB of memory or more on your Mac if you want to upgrade to OS X Mountain Lion.
First of all, open > About this Mac > More Info, and copy "Model Identifier" here, so we can know what Mac you have got and how much memory you can install.
We recommend to buy the memory in OWC or Crucial (Crucial is cheaper and offers the same compatibility warranty as OWC) because you won't probably have any problem with the memory you buy there -
I'm actually trying to find the date i visited a site. adding columns allow the order to be sorted but not show a date. Please tell me it there's a way to see the date. the sidebar no longer has the option for date. the most recent only shows the time.
If you only see the time then that would mean that you see an entry of the current day (today).
History items from past days should have the date as well in the Most Recent Visit column.
You should be able to see this changing if you open the last 7 days folder and scroll down. -
any app I download from the app store doesn't open. after I finished downloading the app I tap it to open but it crashes as soon as i finish downloading it. yes, the downloading process works but any app I download won't launch. pls help
Hi,
Install the v10.6.6 combo update available here. It's ok to do this even though you are already running v10.6.6. The combo includes fixes that were not included in the original update.
http://support.apple.com/kb/DL1349
Restart your Mac and try the MAS again.
You can download apps directly from the MAS once you have it running.
Considering the TM backup took so long, make sure there's enough space on your Mac startup disk.
Right or control click the MacintoshHD icon. Click Get Info. In the Get Info window you will see Capacity and Available. *Make sure you always have a minimum of 15% free disk space.*
Carolyn -
Hello - my safari on my ipad2 gives the following message "safari could not open the page because the server stopped responding"...email works fine and I can download from the app store...seems to just be a safari issue
Marc-
The Safari message is probably telling the truth. Is the problem repeatable at several websites, or is it only with a particular one? If all websites, you may have trouble with your internet connection downloading large amounts of data. Mail messages are relatively small unless there are attachments or embedded images.
Fred -
I have a macbook pro and am trying to upgrade to OS x Mavericks but it won't seem to download from the app store
http://www.apple.com/support/mac/app-store/contact.html?form=account
-
I have repeatedly tried to download Mavericks from the App store. When attempted from the update tab it fails and instructs me to try again from the Purchases tab. When I try it there, I receive an error message that "an error has occurred" and to try again. I have successfully downloaded other apps (both Apple and third party) but Mavericks won't do it.
Please read this whole message before doing anything.
This procedure is a test, not a solution. Don’t be disappointed when you find that nothing has changed after you complete it.
Step 1
The purpose of this step is to determine whether the problem is localized to your user account.
Enable guest logins* and log in as Guest. Don't use the Safari-only “Guest User” login created by “Find My Mac.”
While logged in as Guest, you won’t have access to any of your personal files or settings. Applications will behave as if you were running them for the first time. Don’t be alarmed by this; it’s normal. If you need any passwords or other personal data in order to complete the test, memorize, print, or write them down before you begin.
Test while logged in as Guest. Same problem?
After testing, log out of the guest account and, in your own account, disable it if you wish. Any files you created in the guest account will be deleted automatically when you log out of it.
*Note: If you’ve activated “Find My Mac” or FileVault, then you can’t enable the Guest account. The “Guest User” login created by “Find My Mac” is not the same. Create a new account in which to test, and delete it, including its home folder, after testing.
Step 2
The purpose of this step is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you boot, and again when you log in.
Note: If FileVault is enabled, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to boot and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal boot may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem?
After testing, reboot as usual (not in safe mode) and verify that you still have the problem. Post the results of Steps 1 and 2. -
Mavericks download from the App Store in Australia?
I'm trying to download Mavericks for my iMac (OS X 10.8.6) The App Store icon has a red circle flag w/ the number 2. What does that mean? When I try to open App Store I always get the message Cannot Connect. There's nothing wrong with my broad band connex. What's the problem and how do I solve it?
rk87...thank you for your interest. You were right it is 10.6.8...transposed the numbers. My reason for wanting to get to the App Store is to download Mavericks so I can use iCloud...But as in my original post...App Store won't connect. Why? What can I do about it? What does the little red circle with the white number attached to my dashboard App Store icon indicate?
-
Can't open any apps on my mac book pro that i downloaded from the cloud
can't open any apps in i-tunes on my mac book pro that i downloaded from the cloud
Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, or by a peripheral device.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode and log in to the account with the problem. Note: If FileVault is enabled, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including sound output andWi-Fi on certain iMacs. The next normal boot may also be somewhat slow.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin. Test while in safe mode. Same problem? After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of the test. -
I tried to download the app "Google Translate" from the App Store onto my iPhone 5s. However, the download will not complete. As well, when I try to delete the icon from my home screen, it will not go away. I am very frustrated as this has never happened before and I have gotten many paid and free apps from the App Store. I hope someone can solve my dilemma. Thank you kindly.
What have you tried to get the app to finish downloading e.g. have you tried logging out and back into your account on your phone, disconnecting and reconnecting to your network, soft-reset of your phone (press and hold both the sleep and home buttons for about 10 to 15 seconds, ignore the red slider, after which the Apple logo should appear and it should reboot) ?
You could also try downloading the update on your computer's iTunes and see if you can sync it over to your phone (or delete the app its Apps tab when connected to your computer's iTunes and sync the new version - deleting the app will delete its contents). -
My IPAD 2 will some times not open apps that I have down load from the app store. But will open all of the preinstalled apps.I must go to the app store and install something and then all the apps will open. I should not have to install unwanted apps to keep my IPad working.I have reset and total reset nothing sames to work.
Sounds to me like you may have an issue with the firmware, i.e. the iOS version that you are runing. I also have an iPad 2 and sometimes have to restart it to get it to recognize and run a newly downloaded app. And only once or twice have I had to uninstall and redownload an app that this didn't fix. I think this has more to do with the way an app has been coded more than anything else.
You might try doing a "Reset All Settings" reset and set it up as a new iPad. You should not lose any data, apps, music, videos, etc. that you have stored on your device. I have done this a few times when tweaking the iOS 5.0.1 firmware and never lost anything. You do have to re-enter your ID's and Passwords for wifi. And of course you will need to go back into settings and reset any changes you may have made to things like location and notifications.
I don't know if this will work, but if I was in your place this is the next step that I would take. -
Illustrator CS5 crashes while trying to open after installing Maverick
CS5 Photoshop and indesign seems to be OK.
Dohmus,
The following is a general list of things you may try when the issue is not in a specific file (you may have tried/done some of them already); 1) and 2) are the easy ones for temporary strangenesses, and 3) and 4) are specifically aimed at possibly corrupt preferences); 5) is a list in itself, and 6) is the last resort.
1) Close down Illy and open again;
2) Restart the computer (you may do that up to 3 times);
3) Close down Illy and press Ctrl+Alt+Shift/Cmd+Option+Shift during startup (easy but irreversible);
4) Move the folder (follow the link with that name) with Illy closed (more tedious but also more thorough and reversible);
5) Look through and try out the relevant among the Other options (follow the link with that name, Item 7) is a list of usual suspects among other applications that may disturb and confuse Illy, Item 15) applies to CC, CS6, and maybe CS5);
Even more seriously, you may:
6) Uninstall, run the Cleaner Tool (if you have CS3/CS4/CS5/CS6/CC), and reinstall.
http://www.adobe.com/support/contact/cscleanertool.html
Maybe you are looking for
-
Prob with iTunes playing downloaded .mp3 file
Hi, when I download a single 64Kbps MP3 file (song) from archive.org/audio, it will save to the desktop and look something like this: dtb2005-03-04d1t03_64kb.mp3 Then I try "add to library" in iTunes (5) and the song name appears, but it will be only
-
I have been faced with a Black screen this morning when I have gone to sign in/open my Macbook air this morning. I can see that the keyboard seems to be on as the caps key when pressed is lighting up as is my charger cable link, however have noticed
-
Chinese characters not displaying correctly
the software's windows fonts can't display why? archlinux + fvwm +chromium ! Last edited by jasonwryan (2012-05-21 07:57:53)
-
Hi All, I am using F-53 user-exit EXIT_SAPLF048_001- ZXF48U01 to control the vendor payments. I need to through custom messages if payment is exceed the PO total amt. User may select multiple Account document and pay the amt. But iam unable to get wh
-
Using Native Oracle XML DB Web Services - REST POST web service possible?
My goal is to expose some pl/sql procedures as a REST web services. The Database is 11gR2 The request method needs to be a POST (not GET as a request will perform insert/updates ) - the request body will contain a xml structure Have setup XMLDB Datab