While trying to reinstall itunes it comes up saying cannot delete previous version of itunes

My previous itunes was giving me issues so i decided to reinstall it. I searched up what i had to delete and uninstall so i took off the stuff from the control panel and in program files i was wondering what else i have to do because it keeps giving me the same message every time. Apple Support also was no real help.

For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies. The notes below the box include tips on removing troublesome components.
The further information area has direct links to the current and recent builds in case you have problems downloading, need to revert to an older version or want to try the iTunes for Windows (64-bit - for older video cards) release as a workaround for installation or performance issues, or compatibility with QuickTime or third party software.
Your library should be unaffected by these steps but there also links to backup and recovery advice should it be needed.
tt2

Similar Messages

  • I keep getting an error while trying to reinstall itunes?

    I am trying to reinstall itunes and i am having an issue. I keep getting an error while trying to install and I keep getting very far but I always seem to end up with this.
    "Could not open key
    UNKNOWN\Components\DA42BC89BF25F5BD0AF…
    \b25099274a207264182f8181add555d0.
    Verify that you have sufficient access to that key, or contact your support personnel"
    I was attempting to reinstall due to an error message appearing when I opened itunes
    "Itunes requires a newer version of Apple Mobile Device Support Please uninstall
    both Apple Mobile Device Support and iTunes, then install iTunes again."
    I have tried a few solutions and for the first error when installing one was an attempt at editing a registry file which I do not think succeeded because I am running windows 8 and was being directed for windows 7.

    "Could not open key
    UNKNOWN\Components\DA42BC89BF25F5BD0AF…
    \b25099274a207264182f8181add555d0.
    Doublechecking. Have you tried the following user tip?
    "Could not open key: UNKNOWN\Components\[LongStringOfLettersAndNumbers]\[LongStringOfLettersAndNumbe rs]" error messages when installing iTunes for Windows

  • Trying to reinstall cs4 on my old G5.  doesnt recognize previous version when I select it from drop down menu and put in serial #

    I'm trying to reinstall CS4 on my G5, but when I put in the serial number it doesn't recognize it.  I installed Creative suite premium without trouble but can't get beyond that. My G5 isn't an Intel processor so cant go out and buy new software.  I have discs and sn #'s.

    Piper and me it looks like you have a full version of Photoshop CS4 registered under this account.  Have you tried downloading a fresh copy of the installation files from Download CS4 products?  If so is there any event which occurred on this Mac which is leading you to need to reinstall Photoshop CS4?

  • We are trying to reinstall itunes and cannot remove old virsion

    we are trying to reinstall itunes and cannot remove old virsion

    Go here - http://www.apple.com/support/mac/app-store/ - and try contacting support. While I still show Lion in my purchases, I can't seem to download it again as I am currently running 10.8. But I made a backup of the install app so that I have both Lion and Mountain Lion installers. If you are able to download it again, make certain that you quit the install app and make a USB flash drive installer or DVD using Lion DiskMaker (which also works with Mountain Lion).
    I'm curious as to what sort of problems you encountered when installing ML? Did you make the install? Or did it quit or something?
    Clinton

  • I had to change my hard drive, now i'v tried to reinstall itunes, it is saying i have to restore my ipod touch to factory settings, will i loose all my films by doing this, as now my ipod wont work anyway unless i restore ?

    I had to change my hard drive, now i'v tried to reinstall itunes it says i have to restore my iopd touch to factory settings and will loose my files. I have a few films on there and they show up on my purchases.If i restore, will i be able to get my films back ? as at the moment my ipod wont work now untill i restore anyway.

    Syncing to a new iTunes library or computer will erase your ipod. Only if you back up your device manually before syncing, you can restore from that backup again. A manual backup does not include the sync process.
    Here's how to:
    Disable autosync in iTunes, connect your ipod to your computer and right click on it in the device list and choose backup. iTunes will backup your ipod without syncing.
    Transfer your purchases the same way, choosing "transfer purchases" this time.
    When you connect your device for the first time, all media content will be erased. But you can restore your settings and app data from your manual backup afterwards.
    Don't forget to set up at least one contact and event on your new computer to be able to merge calendars and contacts when you sync the ipod for the first time.
    About backups and what's saved:http://support.apple.com/kb/HT1766
    How to back up and restore:http://support.apple.com/kb/HT1414
    Downloading past purchases from the App Store, iBookstore, and iTunes Store: http://support.apple.com/kb/HT2519
    Saving other data is also described here. How to back up your data and set up as a new device
    Message was edited by: Ingo2711

  • I am trying to reinstall itunes 10.5 and am getting the following error message. An error occurred during the installation of assembly "Microsoft.VC80.CRT.type="win32".version="8.0.50727.6195".publicKey Token="1fc8b3b9a1e18e3b"Anyone know how to fix this?

    i am trying to reinstall itunes 10.5 and am getting the following error message.
    An error occurred during the installation of assembly “Microsoft.VC80.CRT.type=”win32”.version=”8.0.50727.6195”.publicKeyToken=”1fc8b 3b9a1e18e3b”.processorArchitecture=”x86””. Please refer to Help and Support for more information. HRESULT:0X800736B3.
    Anyone know how to fix this?

    same problem. tried the ff fixes from microsoft but no joy
    http://answers.microsoft.com/en-us/windows/forum/windows_7-windows_programs/gett ing-error-message-an-error-occurred-during-the/10122022-2d88-4266-a695-6c6ddeafd 019?tab=AllReplies&page=1
    http://answers.microsoft.com/en-us/windows/forum/windows_vista-windows_programs/ windows-vista-unable-to-install-itunes-an-error/19b48df7-54c8-47f3-8854-d34118fa a79a
    http://support.microsoft.com/mats/system_maintenance_for_windows/en-us
    other ideas would be appreciated.
    cheers

  • Since upgrading to Windows 8.1, iTunes no longer recognizes my iPhone or iPad.  I tried to reinstall iTunes.  That did not address my problem.  Any suggetions on what I should do?

    Since upgrading to Windows 8.1, iTunes no longer recognizes my iPhone or iPad.  I tried to reinstall iTunes.  That did not address my problem.  Any suggetions on what I should do?

    Hey Bob0725!
    Here is an article that will help you troubleshoot this issue:
    iOS: Device not recognized in iTunes for Windows
    http://support.apple.com/kb/ts1538
    Take care, and thanks for visiting the Apple Support Communities.
    Cheers,
    Braden

  • Itunes updates now it says MSVCR80.dll was not found? I have tried to reinstall itunes and keep getting this message?

    Itunes updates now it says MSVCR80.dll was not found? I have tried to reinstall itunes and keep getting this message?

    Hello emeraldhopes,
    Thanks for using Apple Support Communities.
    For more information on this, take a look at:
    iTunes 11.1.4 for Windows: Unable to install or open
    http://support.apple.com/kb/TS5376
    Check for .dll files
    Go to C:\Program Files (x86)\iTunes and C:\Program Files\iTunes and look for .dll files.
    If you find QTMovie.DLL, or any other .dll files, move them to the desktop.
    Reboot your computer.
    Note: Depending on your operating system, you may only have one of the listed paths.
    Uninstall and reinstall iTunes
    Uninstall iTunes and all of its related components.
    Reboot your computer. If you can't uninstall a piece of Apple software, try using the Microsoft Program Install and Uninstall Utility.
    Re-download and reinstall iTunes 11.1.4.
    Best of luck,
    Mario

  • HT2292 I am using win vista and have installed itunes for my ipod shuffle four years back. now I have purchased iphone 4, and trying to reinstall itunes after uninstalling my earlier itunes i always get a message that error in installation. kindly help

    I am using win vista and have installed itunes for my ipod shuffle four years back. now I have purchased iphone 4, and trying to reinstall itunes after uninstalling my earlier itunes i always get a message that error in installation. kindly help

    You might find this article helpful: http://support.apple.com/kb/TS3694
    It has the error range of 3000's which states
    Errors 3000-3999 (3002, 3004, 3013, 3014, 3018, 3164, 3194, and so on): Error codes in the 3000 range generally mean that iTunes cannot contact the gs.apple.com server on ports 80 or 443. This may be because out-of-date or incorrectly configured security or firewall software is interfering, an old version of iTunes is installed, an entry in your hosts file redirecting requests to gs.apple.com (see error 1004 above), or because of your Internet proxy settings. If you are using a proxy, try without using one or with a known-good network. If that does not resolve the issue, follow iTunes for Windows: Troubleshooting security software issues. Error 3014 may indicate that you need to free up more disk space on the computer before trying to restore again. Error 3194 most likely indicates you do not have the latest version of iTunes installed Update to the latest version of iTunes. 

  • Tried to reinstall itunes and got apple application support not found. i have a folder on my desktop of apps removed during a refresh and all my apple stuff is in that folder.

    Im running windows 8 on my desktop. i tried to reinstall itunes and when i open it i get the following message " Apple Application Support not found, Apple Application Support is required to run iTunes". I have a folder on my desktop that has files in it that says Apps removed during refresh and  there is Apple files in there. Im guessing this could be a windows issue but Im not to good with computers. Any help would be great.

    Hello agerveler,
    Thanks for using Apple Support Communities.
    It sounds like we may need to do a complete removal of iTunes and its components, followed by a reinstall.  Follow the instructions in the following article to resolve your issue:
    Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
    http://support.apple.com/kb/HT1923
    Take care,
    Alex H.

  • I am trying to reinstall iTunes on my PC (Windows Vista) and download stalls at the end and message reads "The procedure entry point kCMByteStreamNotification_AvailableLengthChanged could not be located in the dynamic link library Core Media.dll"

    I am trying to reinstall iTunes on my PC (Windows Vista) and the download stops just before completion with the following message: "The procedure entry port kCMByteStreamNotification_AvailabileLengthChanged could not be located in the dynamic link library Core Media.dll"  Also "error 127. Any suggestions?

    Okay. Trouble at the "publishing production information" stage also suggests trouble with Apple Application Support.
    Let's try a standalone Apple Application Support install. It still might not install, but fingers crossed any error messages will give us a better idea of the underlying cause of the issue.
    Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
    http://www.apple.com/itunes/download/
    Download and install the free trial version of WinRAR:
    http://www.rarlab.com/
    Right-click the iTunesSetup.exe (or iTunes64Setup.exe), and select "Extract to iTunesSetup" (or "Extract to iTunes64Setup"). WinRAR will expand the contents of the file into a folder called "iTunesSetup" (or "iTunes64Setup").
    Go into the folder and doubleclick the AppleApplicationSupport.msi to do a standalone AAS install.
    Does it install properly for you? If so, does iTunes launch properly now?
    If instead you get an error message during the install, let us know what it says. (Precise text, please.)

  • Errors trying to reinstall ITunes & Quicktime

    Been trying to reinstall Itunes, Had been getting an Error 1316, got past that one but now just as it looks like quicktime is finished installing I get:
    "Could not open key:
    HKEYLocalMachine\software\classes\quicktimeplayerLib.QuicktimePlayerAPP\CLSID.
    Verify that you have sufficient access to that key, or contact your support personnel."
    I am logged on as an administrator and have all of the MS updates installed.
    Help, Please!

    try this tell me if it works.
    #1 first go here-http://support.microsoft.com/default.aspx?scid=kb;en-us;290301 read the important information about the software.
    #2 Click the "Download the Windows Installer Cleanup Utility package now" link on that page to download a file titled msicuu2.exe.
    #3 Open the msicuu2.exe file and follow the prompts to install it.
    #4 On the Start menu, point to All Programs and then click Windows Install Cleanup; the Windows Installer Clean Up Utility window appears, listing software that is currently installed on your computer.
    #5 Select iTunes from the list and click Remove.
    #6 Click OK in the confirmation dialog that appears.
    #7 Repeat steps 5 and 6 if you have multiple iTunes entries listed.
    #8 Select QuickTime from the list and click Remove.
    #9 Click OK in the confirmation dialog that appears.
    #10 Repeat steps 8 and 9 if you have multiple QuickTime entries listed.
    #11 Click Exit.
    #12 Restart the computer.
    #13 Install the latest version of iTunes from

  • I tried to reinstall itunes, in the middle of the installing process i get the message "The installer has insufficient priviliges to access this directory:C\ProgramFiles [x86]\iTunes. Installation cannot continue.Log on as Administrator or contact your sy

    I tried to reinstall Itunes so i can have my computer interact with my iPod Classic.I uninstalled all the previous programs per apple's instructions.Part way during the reinstallation an error message comes up: The installer has insufficient priviliges to access this directory: C\ProgramFiles[x86]\iTunes.
    Installer cannot continue.Log on as administrator or contact your system administrator.
    I am the administrator on this HP computer.

    Hello PamelaFox14,
    Thank you for using Apple Support Communities.
    It sounds like you need to log in as the administrator to update the iTunes application properly.
    Take a look at this article named:
    Trouble installing iTunes or QuickTime for Windows
    http://support.apple.com/kb/HT1926
    This section in particular:
    1. Make sure you have administrator account access
    To install iTunes or QuickTime software, you need to be logged in as an administrator on the computer. If you're not sure if you have administrator account access, you may find this Microsoft article helpful:
    Windows 7: How do I log on as an administrator?
    Otherwise, refer to the Help documentation from Microsoft, contact your IT department, or visitsupport.microsoft.com for more information.
    All the best,
    Sterling

  • I get error message trying to reinstall ITunes.  Error 7 (Windows Error 193), I get error message trying to reinstall ITunes.  Error 7 (Windows Error 193)

    I get error 7 (windows error 193) when trying to reinstall itunes on all my devices: computer, Iphone, Ipad Air.

    Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (later)
    Remove all of these items in the following order:
    iTunes
    Apple Software Update
    Apple Mobile Device Support (if this won't uninstall move on to the next item)
    Bonjour
    Apple Application Support
    Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
    The uninstall and reinstall process will preserve your iTunes library and settings, but ideally you would back up the library and your other important personal documents and data on a regular basis. See this user tip for a suggested technique.
    Please note:
    Some users may need to follow all the steps in whichever of the following support documents applies to their system. These include some additional manual file and folder deletions not mentioned above.
    HT1925: Removing and Reinstalling iTunes for Windows XP
    HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
    tt2

  • I am trying to reinstall iTunes but everytime I try to reinstall it, it is telling me that I can't because I have a newer version of Quicktime installed. The problem is that I cannot uninstall this, please help.

    I have just purchased an iPhone 4, but it wasn't connecting to my iTunes, so I took advice and uninstalled iTunes. But when I am trying to reinstall iTunes, it keeps telling me that I cannot because I have a newer version of Quicktime installed. I cannot find this newer version anywhere, and have gotten rid of the Quicktime folder, but it is still refusing to install iTunes.
    Please help, I have tried everything.

    But when I am trying to reinstall iTunes, it keeps telling me that I cannot because I have a newer version of Quicktime installed.
    That's usually caused by damaged QuickTime installation configuration information on the PC.
    Unfortunately, this sort of trouble has gotten more complicated to deal with ever since Microsoft pulled the Windows Installer CleanUp utility from their Download Center on June 25. First we have to find a copy of the utility.
    Let's try Googling. (Best not to use Bing, I think.) Look for a working download site for at least version 3.0 of the Windows Installer CleanUp utility. After downloading the utility installer file (msicuu2.exe), scan the file for malware, just in case. (I use the free version of Malwarebytes AntiMalware to do single-file scans for that.)
    If the file is clean, to install the utility, doubleclick the msicuu2.exe file you've downloaded.
    Now run the utility ("Start > All Programs > Windows Install Clean Up"). In the list of programs that appears in CleanUp, select any QuickTime entries and click "Remove".
    Quit out of CleanUp, restart the PC and try installing iTunes again. Does the install go through properly now?
    (If you do find a clean download site for the correct version of CleanUp, please don't tell me where it is. Without wishing to sound paranoid (although I grant it does sound paranoid), there is a non-zero chance that posting links to download locations for the utility here at Discussions leads to that download location being shut down.)

Maybe you are looking for

  • Issue Installing Adobe AIR

    Hi, I'm actually trying to install PhotoShop Element. I can't install it because Adobe AIR is not installed yet. But when I try to install AIR, nothing happened. I Have download the latest version on the adobe website, but when i start the exe, nothi

  • Premiere CS5: need to feather edges in 16 point garbage matted video

    Meaning, I don't want 4 feathered edges (which seems to be all the "Edge Feather" tool does)... I need 16 of them. Here's what I'm doing, a head, neck over a greenscreen. I'm color keying out the head and neck, then garbage matteing out kind of a hal

  • TDS Certificate Generation

    HI, When i am generating and printing TDS Certificates I am getting an error saying "Number Range generation failure". I am seeing the Number ranges created in the below path. SAP Customizing Implementation Guide >> Financial Accounting>> Financial A

  • After update to 4.0 all repositories gone

    After update to OS X Server 4.0 all repositories are missing. I can still see them on the disk but how can I add repositories from the server's drive? There is not option for this. Regards, Jan

  • I added 2 people to spam how do I remove them from spam

    Help I added 2 people on the spam which I didnt want to can this be reversed