While trying to use iTunes on my iPad, it keeps closing itself. Why?
While trying to search on iTunes, it just keeps closing itself. Why?
Try a Reset...
Press and hold the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Release the Buttons.
http://support.apple.com/kb/ht1430
Similar Messages
-
While shopping through my iTunes app my iPad shuts off, my ideas why and how I can fix it?
When I shop using the iTunes app for movies,tv shows etc... My iPad just inexplicably shuts off. Any ideas why or how I can stop this from happening?
Quit iTunes.
Use Disk Utility and select the drive if you can, then select Erase and the middle or security option zero all data option (will delete all data of course).
When that's finished, use iTunes to restore it.
That's how I fixed mine. Make sure it's charged up first, the Mac ports sometimes cut the power off. -
While trying to use my iTunes library it will suddenly stop working with the error message Runtime error R6025 pure virtual function call.
Help???Just responded to this in another thread (note we used Captivate 7 so it might be a different error).
We found that when we created files with embedded swf files that existed ABOVE widgets in the timeline, when someone else tried to open our file it broke/we got the runtime error. The original person could still open it for a time, but eventually the cache would clear and they couldn't.
However, if we ensured swf files are BELOW widgets in the source files, it didn't break. In fact, if we found one that was breaking and got the author to move the swf file on the timeline, it would start working for others.
STRANGE! Let me know if this works for you to! -
I am trying to use apple configurator with ipads. I have been successful with preparing and supervising all ipads but one. When preparing it in configurator, I receive an error that it is refreshed but with an error. Under supervise, I am not able to add apps. I have erased all content to start over but this does not work either
Are you trying to restore a backup, or just sync some apps? Do you have profiles installed on the device?
Have you plugged the ipad into iTunes, and did a fresh install? I'm assuming the device went through the prepare setup properly. You many have to unsupervise it first, then plug it into iTunes to wipe it completely.
I'd then do each step seperately. Prepare it, then install 1 app, if that works, try another app, then maybe a profile. -
Trying to download photos from my ipad to my PC. Have done it before, but this time, itunes recognized the ipad, but the computer itself did not recognize the ipad.
Hey BJDaugh24,
Thanks for the question. If I understand correctly, the iPad is not in iTunes for Windows. I would recommend that you read this article, it may be able to help the issue.
iPhone, iPad, or iPod touch not recognized in iTunes for Windows - Apple Support
Thanks for using Apple Support Communities.
Have a good one,
Mario -
While I'm using facebook in my iPad with Safari browser,sometimes it will just switch to main menue.It also happened with the Facebook apps from the apple store. And the color of the bookmark area becomes black instead of a normal grey color.
Then if you have tried all the browsers try connecting the system to yoour router with an Ethernet cable and turn WiFi off. If you have the same problem then it more then likely after your computer, Router or modem or connection from your ISP.
If you get good browsing with the Ethernet cable then it is either the WiFi card in your Mac or the WiFi system in your router. -
I had to take my hp back to factory setting and reinstall itunes, when I tried to use Itunes match it said i had to Deauthorize all my computers. I am using the same computer and desperately need access to my music.
When you reset to factory settings, the computer is de-authorised.
In iTunes menu Store > View Account > sign in > App Store > Deauthorise All.
Once done, authorise this computer iTunes.
Note: you can only do that once a year. -
I have mac os x10.4.11 Tiger , i tried to update and after I did that when I tried to use itunes, but it doesn't open.. can anyone tell me what I have to do to fix this ??
Hello,
Leopard requirements/10.5.x...
* Mac computer with an Intel, PowerPC G5, or PowerPC G4 (867MHz or faster) processor
minimum system requirements
* 512MB of memory (I say 1.5GB for PPC at least, 2-3GB minimum for IntelMacs)
* DVD drive for installation
* 9GB of available disk space (I say 30GB at least)
Classic/OS9 Apps no longer supported.
Trouble is Apple no longer sells it, check eBay & such for the Retail version, not the Gray Discs...
http://www.ebay.com/sch/i.html?_nkw=mac+os+x+leopard+retail+10.5
There are workarounds if the 867MHz CPU is the only hangup...
http://sourceforge.net/projects/leopardassist/
http://lowendmac.com/osx/leopard/unsupported.html
So we know more about it...
At the Apple Icon at top left>About this Mac, report the version of OSX from that window, then click on More Info, then click on Hardware> and report this upto but not including the Serial#...
Hardware Overview:
Model Name: eMac
Model Identifier: PowerMac6,4
Processor Name: PowerPC G4 (1.2)
Processor Speed: 1.42 GHz
Number Of CPUs: 1
L2 Cache (per CPU): 512 KB
Memory: 2 GB
Bus Speed: 167 MHz
Boot ROM Version: 4.9.2f1 -
I've twice tried to use iTunes match. It stalls in step 2. I've rebooted my iMac computer and it still stalls. Apple's taken the $25 but not delivered the service. Can I get some personal help? There are 12,733 songs, a few dozen of which are not going to be in the Apple music library because they are unique to my collection. Also, some titled "Track XX" and no artist. I assume these would either not upload or else just be uploaded. But, after an overnight of step 2, the iTunes match program was still on song number 7384 or 12733 (it was on that number for over 12 hours). Looking in the music library, activating the iCloud icon and status fields, there were hundreds of songs with the status "waiting."
Lmwilliamson wrote:
Kernel panics:
After taking my late 2009 15 inch macbook pro to the apple store, the genius completely erased my computer and reinstalled the Mac OS X software, but the problem still persists.
I also took it to my college tech support center, they tried to take the ram out and reinsert it and clean up the dust, but the problem still remains.
I am able to use my computer in Safeboot mode (only)
Well it could still be a software problem if you installed a third party program after the OS X wipe and install, because by booting into Safe Mode it disables certain functions of OS X and hardware. Check for updates or problems for all your third party software, include everything, including menulets, System Preference panes, hacks and so forth.
If you restored any sort of software from backup like TimeMachine, it likely was corrupted data and now is returned.
If the college tech support found a lot of dust clogging the rear exhaust vents behind the fans, then likely the heat damage done to the machine has already occured and can't be reversed. Video cards are usually first to go, which Safe Mode does disable the video card somewhat.
Run through this list of fixes, it's systematic in nature, also has a Hardware Test to see what's going on
..Step by Step to fix your Mac
Too bad this is occurring to a mere 4 year old machine, but dust will do that. Here is the culprit that Apple doesn't tell anyone about. -
The feature you are trying to use is on a network resource that is unabailable" Why am I getting this message when I try to updaate itunes or quicktime?
Before trying the update again, use Microsoft's Fix it solution at http://support.microsoft.com/mats/Program_Install_and_Uninstall. Use it to uninstall iTunes and Quicktime. It bypasses this not uncommon problem. When the solution finishes, the selected program will be uninstalled. It can take several minutes and I have seen as much as half an hour.
After iTunes & Quicktime are uninstalled, try the update again. -
Trying to download iTunes 11.1 but it keeps giving me an error message saying:
The feature you are trying to use is on a network resource that is unavailable.
Click OK to try again, or enter an alternate path to a folder containing the installation package "iTunes64.msi" in the box below.
Use Source:iTunes.msi
Perfect, thanks.
Download the Windows Installer CleanUp utility from the following page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page):
http://majorgeeks.com/download.php?det=4459
To install the utility, doubleclick the msicuu2.exe file you downloaded.
Now run the utility ("Start > All Programs > Windows Install Clean Up"). In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove", as per the following screenshot:
Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time? -
Does anyone know how to transfer photos from a MacBook Pro to an iPad3 without using iTunes?
The iPad is synched to another Mac and I don't want to change the synch relationship of the iPad but want to transfer some photos.https://www.dropbox.com
being a Mac newbie try to google to do research. -
I have just transfered 2 dvd movies i purchases with digital copies to my itunes account and now i am trying to put them om my ipad it keeps telling me that these movies are not supported on my ipad. what can i do?
Highlight the movie, go to iTunes menu ADVANCED and select create iPad and AppleTV version.
-
Error while trying to use '{' in the query
Hi,
The below mentioned query is giving Error while trying to use '{'
Query:
select s,x from table(SEM_MATCH(
'{?s rdf:type <http://www.cs.com/sbip/dwh/mdm/data_modeling#Base_Term> .
?s ?p ?x}',
SEM_Models('foundation'),
SEM_RuleBases('OWLPRIME'),
SEM_ALIASES(SEM_ALIAS('dm','http://www.cs.com/sbip/dwh/mdm/data_modeling#'),
SEM_ALIAS('owl','http://www.w3.org/2002/07/owl#')), null, 'INVALID'))
where regexp_like(x,'Customers','i');
Error details:
ORA-29532: Java call terminated by uncaught Java exception: oracle.spatial.rdf.server.TokenMgrError: Lexical error at line 1, column 1. Encountered: "{" (123), after : ""
ORA-06512: at "MDSYS.RDF_MATCH_IMPL_T", line 178
ORA-06512: at "MDSYS.RDF_MATCH_IMPL_T", line 67
ORA-06512: at line 4
I am unable to use Option, Filter in query.
Any solution?
Please let me know do i need to apply any patch?
Note: I am using Oracle Database 11g Enterprise Edition Release 11.1.0.7.0 - 64bit Production
Regards,
Kavitha.Hi,
For OPTIONAL support in 11.1.0.7.0, you need the following patch
Patch 7600122: CURLY BRACE SYNTAX,VIRTUAL MODELS, NETWORK INDEXES AND HINTO FRAMEWORK SUPPORT
Support for SPARQL FILTERs in SEM_MATCH is not available for 11.1.0.7.0. You will need version 11.2.0.1.0 or later for FILTER support. With 11.2.0.1.0, we recommend that you apply our latest patch set:
Patch 9819833: SEMANTIC TECHNOLOGIES 11G R2 FIX BUNDLE 2
All of the above patches are available through My Oracle Support.
Thanks,
Matt -
Has anybody had the following error while trying to download iTunes 10.5? There is a problem with Windows Installer package. A program required for this install to complete could not be run.
Go to "control panel" then "add or remove programs". Highlight "Apple software update" Choose "change" click "Repair" This should do the trick. Then download and install iTunes 10.5 again.
Maybe you are looking for
-
How to create a campaign(Voucher/Coupon) in CRM based on ECC sales order
Hello All, We have a requirement, in Coupon code generation . When sales order are created successfully in ECC, based on the ECC sales order campaign(Coupon/Voucher) needs to be generated in CRM. Please help me in this regard. Regards Ashwin
-
Hi apple users, I am in need of your expertise. I have a mov file and mp4 file which I need converted to DVD. However IDVD quality is terrible and wondering if anyone can help!? I created project in iMovie then exported it to MP4 and also MOV file at
-
Hii, can u anybody send me the Purchasing price conditions, like creating our own conditions and calculation parts. Eg: VAT, Discount 1, Discount 2 etc If any body had that pls send itme,if it is with screen shots that will be much beneficial for me.
-
i am trying to reconcile INV with GL with the below query....am i missing sthg in the query..i am not able to match the amounts b/w INV to GL. SELECT MTA.BASE_TRANSACTION_VALue from gl_je_headers GJH , gl_import_references GIR , gl_je_lines GJL , gl_
-
Error in Session ID for Web application
Hi, I have a question about the Error Message "Error in Session Id". This error shows up in the browser window when I try to run a form on the Web. I have checked the web server name and port in the html files, but everything seems to be correct. I c