While updating 7.1.1 there is a sign to connect to itunes and while i connect to itunes, the itunes is saying your phone is under recovery more? Pls suggest how to move forward? it is stuck on that screen for more than an hr now.
While i was trying to update my iphone 4 to 7.1.1 it is stuck for more than an hr on the connect to itunes screen. While i am trying to connect, it is not connecting to itunes and a message is popping that your phone cannot be connected to itunes as it is under recovery mode.
Here are instructions for using Recovery Mode to restore your iPad.
http://support.apple.com/kb/HT1808
Similar Messages
-
just installed my Apple TV and it's been in the activation screen to set time and date for a while .
not sure what the issue isIt's not properly connected to the network
Make sure location is set correctly
DNS should be on auto (settings - general - network)
If on wifi try Ethernet
Check that router has port 123 open (refer to manual if unsure) -
I disconnected my iPad unconsciously while it was updating ios 7.0.4 and it just stuck on that screen showing apple logo and a loading bar that just won't move on what to do now ????
It's not uncommon for it to not work the first time and sometimes, you have to try it a few times. Turn off your antivirus software and your firewall while you are trying to restore the iPad. Enable them again after you restore.
If that still won't work, post back with detailed information as to what exactly does happen as you go through the process. -
I updated my 3GS to the latest OS. iTunes was updated first, when iTunes finishes updating my phone a box pops up that says my phone is in recovery mode so I click the update button and it goes the whole update cycle again. I unplugged my phone after 4 cycles of updating but now there is NOTHING on my phone, not even the home screen just the itunes symbol . I've tried rebooting my phone but there is still nothing there. HELP!!!!! What can I do
sounds like your phone was jailbroken.
-
My apple keyboard had some problems, the store replaced it for me. I had to sign in to my computer, and couldn't get to pair the keyboard with the computer, as could not sign in. I know there is a command that lets you override this, does anyone know which buttons to press. I gather when you do this, a box comes up and pairs the two with a number you have to type in.
Hi rpaspinall,
Thanks for using Apple Support Communities.
For more information on this, take a look at this article:
Apple Wireless Keyboard: Difficulty during pairing process
http://support.apple.com/kb/ts1569
Best of luck,
Mario -
I have updated my iphone with the current software but it is showing you need to connect to of itunes to activate your phone, when i did that it is continuously showing an error.please help me to get through.
Kindly Activate my phone.Rajan Gupta wrote:
...it is continuously showing an error.
See here > http://support.apple.com/kb/TS3424
Also see this discussion.
https://discussions.apple.com/message/21189708 -
is there any way else to do it without useing quicktime pro....hope apple fixes this in ios 7 the video should come out in landscape regardless of the way you hold your phone or if you start in portrait and go into landscape while recording
You used the data. Verizon can not see what it was sued for. However your phone can see whats apps used the data. go to settings-data usage- there will be a place that says data usage cycle. line the dates up with your cycle. then there will be a bar graph below that extend bother white bars one all the way to the left and one all the way to the right. after those are extended below that will be a list of apps, there should be one that used over 2 gb and that will show you what app used that data in her purse
-
I have garageband 11 and need to know how to make a good deep bass drum that thumps for a rap type song - thanks
just getting started so I would appreciate some assistance
MikeQuit Mail. Force quit if necessary.
Back up all data before proceeding.
Triple-click anywhere in the line below on this page to select it:
~/Library/Mail/V2/MailData
Copy the selected text to the Clipboard by pressing the key combination command-C. In the Finder, select
Go ▹ Go to Folder
from the menu bar. Paste into the box that opens by pressing command-V, then press return.
A folder window will open. Inside it there should be files with names as follows:
Envelope Index
ExternalUpdates.storedata
Move those files to the Desktop, leaving the window open. Other files in the folder may have longer names that begin as above. Move those files, if any, to the Trash.
Relaunch Mail. It should prompt you to re-import your messages. You may get a warning that the index is damaged and that Mail has to quit. Click OK. Typically, the process takes a few minutes, but it may take hours if you have gigantic mailboxes. In that case, you may be able to speed things up by temporarily adding your home folder to the Privacy list in the Spotlight preference pane. Remove it when Mail has finished importing.
Test. If Mail now works as expected, you can delete the files you moved to the Desktop. Otherwise, post your results. -
how can I keep my data doing a hard recovery on my phone? I uploaded newest version and phone is stuck on a screen telling me to plug phone into computer and go to iTunes, when I do this, iTunes says my phone is in recovery and I need to restore, Can anyone please help me get my phone back without losing anything?
You shouldn't have to restore your phone to keep your data. But first press home and on button at the same time until phone shows up Apple logo an boots up normally. When the phone comes back on plug into ituens and back it up by selecting "Back Up Now". Once backed up, you can press update and install 7.1.1 and it will restore and recover all your previously backed up data. You can also press "update" and itunes will automtically back up the phoen and install 7.1.1.
-
In iTunes, is there any way to do a mass copy and paste of song titles from the "name" column to the "sort name" column? I know it can be done with individual titles but I have over 6,000 titles in my library.
Thank you. I have heard of Logic Pro 7, but I have never personally used it. I'm still growing in the world of Composition, and I know that it is something I will be studying in one of my Computer Music classes coming up for my degree. I think it is something I will look into getting once I can justify the price of it. I guess for the time being, I will continue to play and grow in my ability to use and take advantage of GB, and then see what I can do about or with Logic Pro when I'm ready. The thought of spending $1000 for a program is hard to bite, because I've already spent a lot to produce my music, not only electronic music, but also chamber music and so on. I had no idea it would be so expensive to dive deep into the world of composition! lol.
Finale 2007: $500
Sibelius 4: $500
Jam Packs: $400
Midi Keyboard Interface: $100
PowerBook: $1700
Printer for printing scores and analysis: $150
Logic Pro 7: Oy!
As you can see it adds up very quickly...that doesn't even include my personal instruments and study materials.
Thank you for your input, as I haven't really worked much with LP, and therefore didn't know which features are available. I will talk with some of my Composition buddies, and professors and see what they have to say as well, and who knows, I may be able to get the express version through one of them. -
When I enter my photos app(only on my iPad Air), it says my iCloud storage can't update because it's full. In the settings it says I have 1,5 GB storage left. How do I solve this problem?
Welcome to the Apple community.
Could you please clarify what it is that is full, your iPad or your iCloud storage. -
Ok i recently tried to restore my ipod touch but when i plug it in it says your ipod needs to be restored. but when i try to restore it downloads the software and while its downloading it pops up a message saying your ipod needs to be restored. when the download is finished it doesnt restore or do anything and it stays stuck on the plug your ipod into itunes screen somebody please help me.
Maybe:
Restore loop (being prompted to restore again after a restore successfully completes)
Troubleshoot your USB connection. If the issue persists, out-of-date or incorrectly configured third-party security software may be causing this issue. Please follow Troubleshooting security software issues. .
Next try placing in DFU mode and then restoring.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
Then try restoring on another computer.
Last, make an appointment at the Genius Bar of an Apple store.
Apple Retail Store - Genius Bar -
hi everyone i have an iphone 3gs it was running on 4.0.1 and i updated to 6.0.1. then its said i needed to restore my phone to factory settings and i did but now it says; "your phone could not be activated because the activation server is temporarily unavailable try connecting your iphone to itunes to activate it or try again in a couple of minutes"...if this problem persists contact apple support at apple.com/support.
I've tried all that i can and still no results. Could anyone shed some light on the subject if so it would be greatly appriciated!Ok thank you so much! Although I ended up taking the sim card out of my new Iphone and reinserting it into my old one it finally let me restore it! So thanks once again this really helped!
-
There are 5 of us in this house with IPhones and we all want to control the apple tv with our phones. We all have separate iTunes accounts. How do we do this?
I have 3 iPhones in my house and 1 apple tv.
I do NOT set a password on my apple tv, so any iPhone can send video to the tv.
Any iPhone can use the apple remote option also.
Just play a video and click that square with an arrow and play on apple tv. The video comes up from any iPhone in my house.
Same goes for pics, etc -
i just updated my ipad to ios 8 but i cant connect to wifi network..its says my password is incorrect although i know my password is correct as successfully updated 2 iphones and connected to same wifi network
I had the same problem. I reset my network settings as iOS 8 on my iPad 3 seemed a bit slow. When I tried to reconnect to the wifi the correct password was not accepted immediately.
after retrying several times it did manage to join the network. The only observation I had was that I had a weak signal and an iPhone next to me at the time.
make sure you are close to the wifi signal away from any other wifi devices.
Maybe you are looking for
-
I've been disappointed in the quality of HDV down converted to SD in FCP 6. After editing my HDV project I copied all of the clips into an SD timeline, DV 720 x 480. FCP automatically scaled the clips to fit in letterbox. It also added a Field Shift
-
F-44 Clear Vendor Process Open Items
Dear All Can anyone please tell me how to use transaction code F-44. I want to clear Vendor items. But unable to do it. Thanks & Regards Kanwaljit
-
I accidently hit hide as I was selecting a group of photos. How do I find them?
How do I recover a group of pictures after I accidentally hit "hide"?
-
Migrating 3 access2000 DB's with linked tables to each other
I am trying to migrate 3 access2000 DB's to oracle. The main DB's has linked tables to the other 2 DB's. I have been trying to migrate these seperately. When I try and migrate the main DB, it brings along the other 2 with it. Is this sufficient??
-
Regarding the webservice iview
Hello, I am trying create a "webservice iview " in the CE 7.2 portal, while creating it is asking for a function group (in the drop down).i found no function here in the drop down.Could you please tell me how to populate the function group in the d