While updating iphone software to 5.0.1, I am getting error message that Iphone cound not be updated because the firmware file is not compatible. Can anyone help me to resolve this issue.
While updating iphone software to 5.0.1, I am getting error that Iphone could not be updated because the firmware file not compatible.
Can anyone help me to resolve this issue.
Using iTunes 10.5.2.11 on a PC running 64 bit Windows 7
First did a full back up of iphone using iTunes
Put iphone into Recovery Mode ( http://support.apple.com/kb/ht1808 ). Erases all user data and settings!
Disconnected USB cable from iphone
Powered off iphone by holding down Sleep/Off button until slider appeared, slid to off, waited until screen dark
Pressed and kept holding Home button while plugging cable back into phone
I still saw the graphic on the iphone that said to plug into iTunes, so I unplugged and re-plugged cable. (I may have released the Home button too soon)
Recovery Mode alert came up in iTunes.
Followed all iTunes prompts to restore phone - it downloaded and sucessfully installed iOS 5.0.1
iphone did not appear in iTunes due to missing pairing file (that made me nervous)
iphone was now at factory settings. I followed prompts on iphone screen to start reactivation process
Eventually the iphone asked if I wanted to restore from a back-up (whew!)
A window opened in iTunes and I was able to select my previous back-up file for the restore
A full restore from back-up then occured
I also allowed a carrier settings update to occur when prompted (not sure that happens in all cases)
When the restore was done I had to re-enter some passwords, but everything was there
iOS is now 5.0.1 (9A406). The whole process took about an hour.
Similar Messages
-
when i plug my iPhone 4gs to my macbook pro, it doesn't sync and this msg appearThe iPhone “iPhone de anthony” could not be synced because the sync session failed to start. can anyone help me
Same thing for me right now. Anybody have a fix on a Mac? My iPad syncs OK but my iphone 4S has this message.
-
The iphone counld not be restored because the firmware file is not compatible, How to fix?
The iphone counld not be restored because the firmware file is not compatible, How to fix?
whar i doing plz help me
-
I have mac os x 10.5.8 and the latest I Tunes 10.6.3
The first generation iPad can't be updated past 5.1.1.
(114934) -
Restore error:iphone could not be restored because the firmware file is....
can't restore my iphone 3g, becouse this error: iphone could not be restored because the firmware file is not compatibe
To make things wors yesterday iphone was stoped i shutdown it and when i try to turn On the apple appears for a 30 sec then disappear... and again apple appears and for 30 sec disappear...So to fix this problem i need to do restore but i cant becouse i get the error.
Message was edited by: liskanThe error message you are getting sounds like you have jailbroken your iPhone or have updated to iPhone OS 4.0 Beta.
Eitherway, I would follow http://support.apple.com/kb/ts1275 for a possible solution as these steps may not work. -
The iPhone could not be updated because the firmware file is not compatible(iPhone 4s). What should i do? I just bought my iPhone yesterday and i can't update my software from 5.0 version 9A334) to 5.0.1 because the firmware(1.0.11) is not compatible.
dear friends
im experiencing the same problem rite now. i just bought a 4s for my wife yesterday. when i tried updating the ios to 1.0.5 directly from the phone, it showed - 'Unable to Check for Update. An error occured while checking for a software update. and when i tried updating it via itunes, i got this msg - The iPhone "xxx iphone" could not be updated because the firmware file is not compatible.
my internet connection is perfectly ok here. can anybody help me on this?
Thank you -
Just registered iphone 4s and attempted to run the first update to 5.0.1...message "could not be updated because the firmware file is not compatible." What needs to be done?
Check out this article, especially #4: Security Settings: http://support.apple.com/kb/TS1275
-
I was syncing my iPod and got the message that an update was available. I downloaded the update and just as it was almost finished, I got an error message. It couldnt' update my iPod because the "firmware file is not compatible." What's up with this? I've never had any problems before with this iPod or with my iPhone 4S before this.
Update your iTunes to latest version.
Try restoring your phone in DFU Mode, if that doesn’t work then try downgrading your iTunes back to iTunes 8 and try again. -
In trying to download an update I first received: "There were problems checking for, downloading, or installing this update. Firefox could not be updated because: No data was received (please try again)" It also gave a link to download manually. When I tried from the Firefox website I got: /Users/(deleted for privacy)/Desktop/Firefox 3.6.3(2).dmg.part could not be saved, because the source file could not be read.
Try again later, or contact the server administrator. I tried this 3 times.
== This happened ==
Not sure how often
== Mon around 11 am, central time, May 17, 2010I have tried downloading the file several times and get the same message: "No data received." I have no other system problems, I navigate well to other sites, but I'm unable to download this upgrade. Any suggestions?
-
I am running version 3.6.22 and would like to update. However when I tried to update from the Mozilla web site I got the message: "/tmp/S_ku+qmL.part could not be saved, because the source file could not be read. Try again later, or contact the server administrator"
What do I do now?? Paul Stager [email protected]I have tried downloading the file several times and get the same message: "No data received." I have no other system problems, I navigate well to other sites, but I'm unable to download this upgrade. Any suggestions?
-
I did the iTunes update yesterday and now I am getting this message when I try to open iTunes - “This copy of iTunes is corrupted or is not installed correctly. Please re-install iTunes. (-42037) Can anybody help me out resolving this?
Download iTunes using the tab at the top of this page, re-install. Back up your computer first.
-
My iphone 5s and model A1457 and even after i downloaded the IOS 7.1,2 itunes get me error "the iphone could not be updated because the firmware file is not compatible"
some people saying that u cant get back and other saying yes u can
i wonder if i still can and how to avoid that error
IOS 8 Drain battery like **** -.-" & wireless not working well -.-", that's so annoying ...
(if someone got a solution, i would appreciate it, Thx in advance)You may have to arrange to take the product into an authorized
service agent for the iPhone (or other affected iDevice) to see
if they can apply the correct firmware update, to help resolve the
issue of upgrade; or if they have a way to put it as it was prior to
the attempted upgrade to a later iOS.
See all worldwide telephone support numbers
Contact a mobile carrier
Find an Apple Authorized Service Provider
Visit an Apple Retail Store
Pending some release of another update to the iOS, you'd need
to have someone's hands-on effort to correct the issues your
product faces now, before another round of upgrade attempt.
Sorry that I have no exact method to attempt to resolve your issue.
Good luck & happy computing! -
I have an iPod Classic and work on Windows 7.
i recently installed iTunes 10.5 update and since then i cannot play any of the songs in the Library - i get the following message
"The song could not be used because the original file could not be found. Would you like to locate it?"
what happened to all my songs (almost 2000) How can i get them back into my music library?
Please help - i do not want to spend another week downloading all my cd's onto my computer !!!!!Try my script FindTracks. Select a few of the missing files to start with then run the script. Choose No at the first prompt so that you can check how it works track by track, then confirm or edit the location of the media folder where your files are. Once you are happy with how it behaves let it process larger numbers of tracks automatically.
tt2 -
i try to restore ipad to ios 7.0.4 but the tunes show error ,the ipad could not be restore because the firmware file was corrupt, i have the latest update from itunes and windows and i turn off antivirus and firewall and the error is the same , what i do?, my ipad is show apple logo
please what i doHello JD_NINJA,
Thanks for using Apple Support Communities.
Error 9006 when restoring your iOS device indicates that there is security software on your computer which is preventing connection to the Apple server or your device. To troubleshoot this issue please follow the directions below.
Check your security software
Related errors: 2, 4, 6, 9, 1611, 9006. Sometimes security software can stop your device from communicating with either the Apple update server or with your device.
Check your security software and settings to make sure that they aren't blocking a connection to the Apple servers.
Get help with iOS update and restore errors - Apple Support
When restoring your iPhone, please make sure to follow the directions in the link below to properly restore.
Restore your device from an iCloud or iTunes backup - Apple Support
Take care,
Alex H. -
Please help - this morning I tried updating one of my old ipods for my wife (this ipod hasn't been updated in 2-3 years). I plugged it into my pc, it was recognized and the software updated. I created a new playlist and tied to sync the ipod. This ipod had never been used on this pc/itunes since the pc is only 2 years old. When I tried to sync the ipod it stated that it would have to erase all the old songs on the ipod prior to syncing. I clicked ok and it proceeded to wipe out the old ipod and sync the new playlist (~1000 songs). When the sync was complete there were only 6 songs from the new playlist (all purchased this morning from itunes) on the ipod and to my horror all ~10,000 song on my pc in itunes now have a ! next to them. Only my recent purchases from itunes do not. When I click on a song with the ! I get the error message "the song " " could not be used because the original file could not be found." How do I correct this issue - I am scared to hook my ipads or other ipods to my pc for fear of losing everything?!?!? I spent 100s of hours burning the 10,000 songs from my cd collection and do not want to have to do it again.
Any help is greatly appreciated.This "original file cannot be found" thing happens if the file is no longer where iTunes expects to find it. Possible causes are that you or some third party tool has moved, renamed or deleted the file, or that the drive it lives on has had a change of drive letter. It is also possible that iTunes has changed from expecting the files to be in the pre-iTunes 9 layout to post-iTunes 9 layout,or vice-versa, and so is looking in slightly the wrong place.
Select a track with an exclamation mark, use Ctrl-I to get info, then cancel when asked to try to locate the track. Look on the summary tab for the location that iTunes thinks the file should be. Now take a look around your hard drive(s). Hopefully you can locate the track in question. If a section of your library has simply been moved, or a drive letter has changed, it should be possible to reverse the actions.
Alternatively, as long as you can find a location holding the missing files, then you should be able to use my FindTracks script to reconnect them to iTunes .
tt2
Maybe you are looking for
-
New 500 GB DVR Multi Room Not working!
I received the new 500 GB DVR this past Friday and set it up over the weekend. I'm having issues with viewing the new content on the new DVR with other STBs. I've tried rebooting all the boxes and unplug each one but still get the same message that T
-
I'm having trouble loading photos on my I phone 4s and I pod. I don't see the photos tab in I-tunes? I'm sure its user error but wanted to get some help.
-
Not able to Populate Qualified Table in Import Manager
Hi, I am performing following steps for populating Bank Detail Qualified table in MDM from R3 but not able to populate the data. 1.Populating all lookup tables like Account_no,Bank-Key....... 2.Mapping all fields in Bank detail table except the 'Coll
-
can any one help me out as how to find the USER EXITS , or INCLUDES in functional module for any enhancement Cheers
-
Interactive Reporting - Dragging a Pie Chart into a Report
I have a report that contains about 5 charts at the end of all the tables containing data (the charts are in the report footer). I have created a new pie chart and want to drag it into the report footer as well. When I drag it in, it goes at the very