While upgrading 574 Application Accelerator to 4.4.7 System Crashed

I was upgradeing from 4.2.3c to 4.4.7
I upgraded the Central Manager without a problem
Went to upgrade the 574 Application Accelerator
With the following command
"Copy ftp install ftpserver / waas-universal-4.4.7.4-k9.bin"
So I ran "reload" and now it freezes at the lines below upon reboot
dbgrub_start.s
Booting the Kernel
Kernal Alive
Kernal direct mapping tables to la7fff000 @ 8000-10000
It gets to that point and just freezes.  What would be the best steps to follow to try to get this back up without blowing it away?
and it hung up d

Ok, much better. I can connect to it now, but it looks like the configuration is blown away.
I am not sure what would be the best way to get back online from this point.
Before upgrading it did a backup and stored it locally on the disc.  Is there a way to get that backup restored?  Should I be using the 4.2.3c rescue disk to acomplish this, or can I use the 4.4.7 that I am upgrading it to?
Also I have a backup that I ran from management connection from HTTPS:
Can I use the 4.4.7 rescue cd blow the old system away then do a restore from this backup that I made from the cisco wae under the backup tab?
Thanks for your help!

Similar Messages

  • Error while upgrading web application with SSRS from 2010 to 2013

    I am trying to upgrade a site collection which has SSRS reports in it. When I run Test-SPContentDatabase
    with database of SP2010 and the new web application of 2013 I obtain the errors:
    Category        : MissingWebPart
    Error           : True
    UpgradeBlocking : False
    Message         : WebPart class [ab6d9dad-e23c-ce4f-ff98-f6575a1ccf4c] (class [
                      Microsoft.ReportingServices.SharePoint.UI.WebParts.ReportView
                      erWebPart] from assembly 
                      [Microsoft.ReportingServices.SharePoint.UI.WebParts, 
                      Version=10.0.0.0, Culture=neutral, 
                      PublicKeyToken=89845dcd8080cc91]) is referenced [6] times in 
                      the database [Areas_10100], but is not installed on the 
                      current farm. Please install any feature/solution which 
                      contains this web part.
    Remedy          : One or more web parts are referenced in the database 
                      [Areas_10100], but are not installed on the current farm. 
                      Please install any feature or solution which contains these 
                      web parts.
    Locations       : 
    Category        : MissingAssembly
    Error           : True
    UpgradeBlocking : False
    Message         : Assembly 
                      [Microsoft.ReportingServices.SharePoint.UI.ServerPages, 
                      Version=10.50.0.0, Culture=neutral, 
                      PublicKeyToken=89845dcd8080cc91] is referenced in the 
                      database [Areas_10100], but is not installed on the current 
                      farm. Please install any feature/solution which contains 
                      this assembly.
    Remedy          : One or more assemblies are referenced in the database 
                      [Areas_10100], but are not installed on the current farm. 
                      Please install any feature or solution which contains these 
                      assemblies.
    Locations       : 
    SSRS are configured in both farms (2010 and 2013). In 2010 farm is SSRS 2008 R2. In the environment of 2013 farm is SSRS 2012.
    Any idea?

    Similar Thread:
    http://social.technet.microsoft.com/Forums/sharepoint/en-US/68cc3179-8ed8-4435-b645-11f79f8bdc1f/upgrade-test-testspcontentdatabase-reporting-services-error?forum=sharepointadmin
    This post is my own opinion and does not necessarily reflect the opinion or view of Slalom.

  • Error  while accessing the application server file

    Hello,
    When I try to load the data from CSV file to PSA , I am getting following error message
    "Error  while accessing the application server file"
    "Errors in source system"
    I gave the right file path
    I am not sure about this error message.
    Thanks,

    Hi ram,
    if you have more than one application server running in your BI system (see at transaction SM51) be aware that your infopackage will be executed on the right one. Each application server has its own file system and your job need to run on the server your file is stored on.
    Also check if the os user of the SAP system itself (<sid>adm on Unix) has rights to read that file.
    Bye
    Frank

  • Ora-00001 error occured while upgrading 10.2.0.4 to 11.2.0.3

    Hi all,
    I am facing 'ora-00001: Unique constraint(SYSMAN.MGMT_PRIV_GRANTS_PK) violated' while upgrading 10.2.0.4 database to 11.2.0.3 using DBUA. Need urgent help in resolving this.
    Thanks
    Sandeep

    Hi srini,
    Yes, all the actions required by pre-upgrade tool are performed.
    In our case dbua related logs are present in $ORACLE_BASE/cfgtoollogs/dbua/logs folder.
    Files under this folder are:
    1.) sqls.log 2.) trace.log
    Last 100 lines from trace.log file
    [Thread-52] [ 2012-10-24 13:59:01.749 GMT+05:30 ] [Util.<init>:95] Util Instance created.
    [Thread-52] [ 2012-10-24 13:59:01.762 GMT+05:30 ] [OracleHome.getVersion:889] OracleHome.getVersion called. Current Version: null
    [Thread-52] [ 2012-10-24 13:59:01.768 GMT+05:30 ] [InventoryUtil.getOUIInvSession:347] setting OUI READ level to ACCESSLEVEL_READ_LOCKLESS
    [Thread-52] [ 2012-10-24 13:59:01.769 GMT+05:30 ] [OracleHome.getVersion:908] Homeinfo /nhi2/app/oracle11g/product/11.2.0/dbhome_1,7
    [Finalizer thread] [ 2012-10-24 13:59:01.822 GMT+05:30 ] [Util.finalize:126] Util: finalized called for oracle.ops.mgmt.has.Util@a360a36
    [Finalizer thread] [ 2012-10-24 13:59:01.822 GMT+05:30 ] [Util.finalize:126] Util: finalized called for oracle.ops.mgmt.has.Util@1700170
    [Thread-52] [ 2012-10-24 13:59:01.960 GMT+05:30 ] [OracleHome.getVersion:936] OracleHome.server.getVersion Version: 11.2.0.3.0
    [Thread-52] [ 2012-10-24 13:59:01.960 GMT+05:30 ] [OracleHome.getVersion:957] Current Version From Inventory: 11.2.0.3.0
    [Thread-52] [ 2012-10-24 13:59:01.960 GMT+05:30 ] [OracleHome.getVersion:889] OracleHome.getVersion called. Current Version: 11.2.0.3.0
    [Thread-52] [ 2012-10-24 13:59:01.961 GMT+05:30 ] [OracleHome.getVersion:957] Current Version From Inventory: 11.2.0.3.0
    [Thread-52] [ 2012-10-24 13:59:01.961 GMT+05:30 ] [CommonUtils.createPasswordFile:604] calling new orapwd for 11.1 or higher
    [Thread-52] [ 2012-10-24 13:59:01.963 GMT+05:30 ] [OsUtilsBase.execProg:2183] beginning execProg with input array.
    [Thread-52] [ 2012-10-24 13:59:02.046 GMT+05:30 ] [OsUtilsBase.execProg:2220] finished execProg with input array. Status:0
    [Thread-52] [ 2012-10-24 13:59:02.046 GMT+05:30 ] [OracleHome.initOptions:1236] Initializing Database Options with for dummy sid=DBUA5901749 using initfile=/nhi2/app/oracle11g/product/11.2.0/dbhome_1/dbs/initDBUA5901749.ora using pwdfile=/nhi2/app/oracle11g/product/11.2.0/dbhome_1/dbs/orapwDBUA5901749
    [Thread-52] [ 2012-10-24 13:59:02.047 GMT+05:30 ] [OracleHome.getVersion:889] OracleHome.getVersion called. Current Version: 11.2.0.3.0
    [Thread-52] [ 2012-10-24 13:59:02.047 GMT+05:30 ] [OracleHome.getVersion:957] Current Version From Inventory: 11.2.0.3.0
    [Thread-52] [ 2012-10-24 13:59:02.047 GMT+05:30 ] [OracleHome.getVersion:889] OracleHome.getVersion called. Current Version: 11.2.0.3.0
    [Thread-52] [ 2012-10-24 13:59:02.047 GMT+05:30 ] [OracleHome.getVersion:957] Current Version From Inventory: 11.2.0.3.0
    [Thread-52] [ 2012-10-24 13:59:02.047 GMT+05:30 ] [OracleHome.getVersion:889] OracleHome.getVersion called. Current Version: 11.2.0.3.0
    [Thread-52] [ 2012-10-24 13:59:02.048 GMT+05:30 ] [OracleHome.getVersion:957] Current Version From Inventory: 11.2.0.3.0
    [Thread-52] [ 2012-10-24 13:59:02.048 GMT+05:30 ] [SQLPlusEngine.getCmmdParams:222] m_home 11.2.0.3.0
    [Thread-52] [ 2012-10-24 13:59:02.048 GMT+05:30 ] [SQLPlusEngine.getCmmdParams:223] version > 112 true
    [Thread-52] [ 2012-10-24 13:59:02.048 GMT+05:30 ] [SQLEngine.getEnvParams:555] Default NLS_LANG: AMERICAN_AMERICA.AL32UTF8
    [Thread-52] [ 2012-10-24 13:59:02.049 GMT+05:30 ] [SQLEngine.getEnvParams:565] NLS_LANG: AMERICAN_AMERICA.AL32UTF8
    [Thread-52] [ 2012-10-24 13:59:02.049 GMT+05:30 ] [SQLEngine.initialize:325] Execing SQLPLUS/SVRMGR process...
    [Thread-52] [ 2012-10-24 13:59:02.087 GMT+05:30 ] [SQLEngine.initialize:362] m_bReaderStarted: false
    [Thread-52] [ 2012-10-24 13:59:02.090 GMT+05:30 ] [SQLEngine.initialize:366] Starting Reader Thread...
    [Thread-52] [ 2012-10-24 13:59:02.227 GMT+05:30 ] [OracleHome.initOptions:1248] executing: startup nomount pfile='/nhi2/app/oracle11g/product/11.2.0/dbhome_1/dbs/initDBUA5901749.ora'
    [Thread-52] [ 2012-10-24 13:59:29.944 GMT+05:30 ] [OracleHome.initOptions:1259] executing: select parameter from v$option where value='TRUE'
    [Thread-52] [ 2012-10-24 13:59:29.966 GMT+05:30 ] [OracleHome.initOptions:1265] Database Option Partitioning is ON
    [Thread-52] [ 2012-10-24 13:59:29.967 GMT+05:30 ] [OracleHome.initOptions:1265] Database Option Objects is ON
    [Thread-52] [ 2012-10-24 13:59:29.967 GMT+05:30 ] [OracleHome.initOptions:1265] Database Option Advanced replication is ON
    [Thread-52] [ 2012-10-24 13:59:29.967 GMT+05:30 ] [OracleHome.initOptions:1265] Database Option Bit-mapped indexes is ON
    [Thread-52] [ 2012-10-24 13:59:29.967 GMT+05:30 ] [OracleHome.initOptions:1265] Database Option Connection multiplexing is ON
    [Thread-52] [ 2012-10-24 13:59:29.967 GMT+05:30 ] [OracleHome.initOptions:1265] Database Option Connection pooling is ON
    [Thread-52] [ 2012-10-24 13:59:29.967 GMT+05:30 ] [OracleHome.initOptions:1265] Database Option Database queuing is ON
    [Thread-52] [ 2012-10-24 13:59:29.968 GMT+05:30 ] [OracleHome.initOptions:1265] Database Option Incremental backup and recovery is ON
    [Thread-52] [ 2012-10-24 13:59:29.968 GMT+05:30 ] [OracleHome.initOptions:1265] Database Option Instead-of triggers is ON
    [Thread-52] [ 2012-10-24 13:59:29.968 GMT+05:30 ] [OracleHome.initOptions:1265] Database Option Parallel backup and recovery is ON
    [Thread-52] [ 2012-10-24 13:59:29.968 GMT+05:30 ] [OracleHome.initOptions:1265] Database Option Parallel execution is ON
    [Thread-52] [ 2012-10-24 13:59:29.968 GMT+05:30 ] [OracleHome.initOptions:1265] Database Option Parallel load is ON
    [Thread-52] [ 2012-10-24 13:59:29.968 GMT+05:30 ] [OracleHome.initOptions:1265] Database Option Point-in-time tablespace recovery is ON
    [Thread-52] [ 2012-10-24 13:59:29.969 GMT+05:30 ] [OracleHome.initOptions:1265] Database Option Fine-grained access control is ON
    [Thread-52] [ 2012-10-24 13:59:29.969 GMT+05:30 ] [OracleHome.initOptions:1265] Database Option Proxy authentication/authorization is ON
    [Thread-52] [ 2012-10-24 13:59:29.969 GMT+05:30 ] [OracleHome.initOptions:1265] Database Option Change Data Capture is ON
    [Thread-52] [ 2012-10-24 13:59:29.969 GMT+05:30 ] [OracleHome.initOptions:1265] Database Option Plan Stability is ON
    [Thread-52] [ 2012-10-24 13:59:29.969 GMT+05:30 ] [OracleHome.initOptions:1265] Database Option Online Index Build is ON
    [Thread-52] [ 2012-10-24 13:59:29.972 GMT+05:30 ] [OracleHome.initOptions:1265] Database Option Coalesce Index is ON
    [Thread-52] [ 2012-10-24 13:59:29.972 GMT+05:30 ] [OracleHome.initOptions:1265] Database Option Managed Standby is ON
    [Thread-52] [ 2012-10-24 13:59:29.972 GMT+05:30 ] [OracleHome.initOptions:1265] Database Option Materialized view rewrite is ON
    [Thread-52] [ 2012-10-24 13:59:29.973 GMT+05:30 ] [OracleHome.initOptions:1265] Database Option Database resource manager is ON
    [Thread-52] [ 2012-10-24 13:59:29.973 GMT+05:30 ] [OracleHome.initOptions:1265] Database Option Spatial is ON
    [Thread-52] [ 2012-10-24 13:59:29.973 GMT+05:30 ] [OracleHome.initOptions:1265] Database Option Export transportable tablespaces is ON
    [Thread-52] [ 2012-10-24 13:59:29.973 GMT+05:30 ] [OracleHome.initOptions:1265] Database Option Transparent Application Failover is ON
    [Thread-52] [ 2012-10-24 13:59:29.973 GMT+05:30 ] [OracleHome.initOptions:1265] Database Option Fast-Start Fault Recovery is ON
    [Thread-52] [ 2012-10-24 13:59:29.974 GMT+05:30 ] [OracleHome.initOptions:1265] Database Option Sample Scan is ON
    [Thread-52] [ 2012-10-24 13:59:29.974 GMT+05:30 ] [OracleHome.initOptions:1265] Database Option Duplexed backups is ON
    [Thread-52] [ 2012-10-24 13:59:29.974 GMT+05:30 ] [OracleHome.initOptions:1265] Database Option Java is ON
    [Thread-52] [ 2012-10-24 13:59:29.974 GMT+05:30 ] [OracleHome.initOptions:1265] Database Option OLAP Window Functions is ON
    [Thread-52] [ 2012-10-24 13:59:29.974 GMT+05:30 ] [OracleHome.initOptions:1265] Database Option Block Media Recovery is ON
    [Thread-52] [ 2012-10-24 13:59:29.974 GMT+05:30 ] [OracleHome.initOptions:1265] Database Option Fine-grained Auditing is ON
    [Thread-52] [ 2012-10-24 13:59:29.975 GMT+05:30 ] [OracleHome.initOptions:1265] Database Option Application Role is ON
    [Thread-52] [ 2012-10-24 13:59:29.975 GMT+05:30 ] [OracleHome.initOptions:1265] Database Option Enterprise User Security is ON
    [Thread-52] [ 2012-10-24 13:59:29.975 GMT+05:30 ] [OracleHome.initOptions:1265] Database Option Oracle Data Guard is ON
    [Thread-52] [ 2012-10-24 13:59:29.975 GMT+05:30 ] [OracleHome.initOptions:1265] Database Option OLAP is ON
    [Thread-52] [ 2012-10-24 13:59:29.975 GMT+05:30 ] [OracleHome.initOptions:1265] Database Option Basic Compression is ON
    [Thread-52] [ 2012-10-24 13:59:29.976 GMT+05:30 ] [OracleHome.initOptions:1265] Database Option Join index is ON
    [Thread-52] [ 2012-10-24 13:59:29.976 GMT+05:30 ] [OracleHome.initOptions:1265] Database Option Trial Recovery is ON
    [Thread-52] [ 2012-10-24 13:59:29.976 GMT+05:30 ] [OracleHome.initOptions:1265] Database Option Data Mining is ON
    [Thread-52] [ 2012-10-24 13:59:29.976 GMT+05:30 ] [OracleHome.initOptions:1265] Database Option Online Redefinition is ON
    [Thread-52] [ 2012-10-24 13:59:29.976 GMT+05:30 ] [OracleHome.initOptions:1265] Database Option Streams Capture is ON
    [Thread-52] [ 2012-10-24 13:59:29.977 GMT+05:30 ] [OracleHome.initOptions:1265] Database Option File Mapping is ON
    [Thread-52] [ 2012-10-24 13:59:29.977 GMT+05:30 ] [OracleHome.initOptions:1265] Database Option Block Change Tracking is ON
    [Thread-52] [ 2012-10-24 13:59:29.977 GMT+05:30 ] [OracleHome.initOptions:1265] Database Option Flashback Table is ON
    [Thread-52] [ 2012-10-24 13:59:29.977 GMT+05:30 ] [OracleHome.initOptions:1265] Database Option Flashback Database is ON
    [Thread-52] [ 2012-10-24 13:59:29.977 GMT+05:30 ] [OracleHome.initOptions:1265] Database Option Transparent Data Encryption is ON
    [Thread-52] [ 2012-10-24 13:59:29.978 GMT+05:30 ] [OracleHome.initOptions:1265] Database Option Backup Encryption is ON
    [Thread-52] [ 2012-10-24 13:59:29.978 GMT+05:30 ] [OracleHome.initOptions:1265] Database Option Unused Block Compression is ON
    [Thread-52] [ 2012-10-24 13:59:29.978 GMT+05:30 ] [OracleHome.initOptions:1265] Database Option Result Cache is ON
    [Thread-52] [ 2012-10-24 13:59:29.978 GMT+05:30 ] [OracleHome.initOptions:1265] Database Option SQL Plan Management is ON
    [Thread-52] [ 2012-10-24 13:59:29.978 GMT+05:30 ] [OracleHome.initOptions:1265] Database Option SecureFiles Encryption is ON
    [Thread-52] [ 2012-10-24 13:59:29.979 GMT+05:30 ] [OracleHome.initOptions:1265] Database Option Real Application Testing is ON
    [Thread-52] [ 2012-10-24 13:59:29.979 GMT+05:30 ] [OracleHome.initOptions:1265] Database Option Flashback Data Archive is ON
    [Thread-52] [ 2012-10-24 13:59:29.979 GMT+05:30 ] [OracleHome.initOptions:1265] Database Option DICOM is ON
    [Thread-52] [ 2012-10-24 13:59:29.992 GMT+05:30 ] [OracleHome.initOptions:1265] Database Option Active Data Guard is ON
    [Thread-52] [ 2012-10-24 13:59:29.992 GMT+05:30 ] [OracleHome.initOptions:1265] Database Option Server Flash Cache is ON
    [Thread-52] [ 2012-10-24 13:59:29.992 GMT+05:30 ] [OracleHome.initOptions:1265] Database Option Advanced Compression is ON
    [Thread-52] [ 2012-10-24 13:59:29.992 GMT+05:30 ] [OracleHome.initOptions:1265] Database Option XStream is ON
    [Thread-52] [ 2012-10-24 13:59:29.993 GMT+05:30 ] [OracleHome.initOptions:1265] Database Option Deferred Segment Creation is ON
    [Thread-52] [ 2012-10-24 13:59:29.993 GMT+05:30 ] [OracleHome.initOptions:1269] executing: select version from v$timezone_file
    [Thread-52] [ 2012-10-24 13:59:29.997 GMT+05:30 ] [OracleHome.initOptions:1275] Timezone file version is 14
    [Thread-52] [ 2012-10-24 13:59:31.019 GMT+05:30 ] [SQLEngine.done:2189] Done called
    [Thread-52] [ 2012-10-24 13:59:31.020 GMT+05:30 ] [OsUtilsBase.deleteFile:1863] OsUtilsBase.deleteFile: /nhi2/app/oracle11g/product/11.2.0/dbhome_1/dbs/initDBUA5901749.ora
    [Thread-52] [ 2012-10-24 13:59:31.034 GMT+05:30 ] [OsUtilsBase.deleteFile:1863] OsUtilsBase.deleteFile: /nhi2/app/oracle11g/product/11.2.0/dbhome_1/dbs/orapwDBUA5901749
    [Thread-52] [ 2012-10-24 13:59:31.042 GMT+05:30 ] [OracleHome.initOptions:1316] Diag cleanup /nhi2/app/oracle11g/product/11.2.0/dbhome_1/log/diag/rdbms/dbua5901749
    [Thread-52] [ 2012-10-24 13:59:31.564 GMT+05:30 ] [OracleHome.initOptions:1324] Database Options queried: 60
    [Thread-52] [ 2012-10-24 13:59:31.564 GMT+05:30 ] [CompManager.setLoggingDirForDB:6992] Create logging folder for database=baan
    [Thread-52] [ 2012-10-24 13:59:31.565 GMT+05:30 ] [CompManager.createUniqueDirs:6953] create createUniqueDirs logging folder=/nhi2/app/oracle11g/cfgtoollogs/dbua/baan/upgrade
    [Thread-52] [ 2012-10-24 13:59:31.566 GMT+05:30 ] [CompManager.createUniqueDirs:6965] create createUniqueDirs logging folder=/nhi2/app/oracle11g/cfgtoollogs/dbua/baan/upgrade1
    [Thread-52] [ 2012-10-24 13:59:31.574 GMT+05:30 ] [CompManager.createUniqueDirs:6973] create SUCCESS for folder=/nhi2/app/oracle11g/cfgtoollogs/dbua/baan/upgrade1
    Thanks,
    Sandeep Vadlamudi

  • How do I install Snow Leopard while keeping files, applications, and settings

    I need to update my system, I realized that I need Snow Leopard (quiet late) before Maverick. My question is, how can I install it keeping files and all the data. I found this on Internet, does it work?
    Install Snow Leopard while keeping files, applications, and settings
    If you follow these steps, the installer will replace your operating system if one is already present, but will preserve your account information and personal files.  You may have to reinstall some applications, however.
    Insert the install disc (or the first install disc if you have more than one) into your disc drive. Restart your computer while holding down the c key. This causes your computer to start up from the install disc rather than your hard drive. When you see the gray Apple insignia, release c . 
    The Mac OS X installer should open automatically. Follow the on-screen prompts to read and accept the license agreement and begin the installation. When prompted to choose a destination disk, select your preferred location and click Install. 
    When the Mac OS X installation finishes with the disc, restart your computer. After the installation completes, a configuration program may begin automatically if you are installing for the first time. You will need to supply basic setup information for your computer. 
    Update your system software to ensure that you have the most recent operating system components.  From the Apple menu, select Software Update... , and then follow the instructions on the screen. Often, you will have to restart your computer, and you may have to run Software Update multiple times before it can completely update your system.

    That's why you need to back it up. You won't need to restore the backup immediately afterwards unless something goes wrong during the upgrade, but you'll need it later; the drive will eventually fail.
    (105428)

  • Error while upgrading to 10.1.3.5

    I am getting error while upgrading to 10.1.3.5.
    getting error while configuring OWSM. here is the error log.
    *09/09/28 14:28:53 Notification ==>Application Deployer for coreman STARTS.*
    *09/09/28 14:28:53 Notification ==>Undeploy previous deployment*
    *09/09/28 14:28:58 Notification ==>Initialize /space/oracle11bpel/j2ee/oc4j_soa11wf/applications/coreman.ear begins...*
    *09/09/28 14:28:58 Notification ==>Initialize /space/oracle11bpel/j2ee/oc4j_soa11wf/applications/coreman.ear ends...*
    *09/09/28 14:28:58 Notification ==>Starting application : coreman*
    *09/09/28 14:28:58 Notification ==>Initializing ClassLoader(s)*
    *09/09/28 14:28:58 Notification ==>Initializing EJB container*
    *09/09/28 14:28:58 Notification ==>Loading connector(s)*
    *09/09/28 14:28:58 Notification ==>Starting up resource adapters*
    *09/09/28 14:28:58 Notification ==>Initializing EJB sessions*
    *09/09/28 14:28:58 Notification ==>Committing ClassLoader(s)*
    *09/09/28 14:28:58 Notification ==>Initialize coreman begins...*
    *09/09/28 14:28:58 Notification ==>Initialize coreman ends...*
    *09/09/28 14:28:58 Notification ==>Started application : coreman*
    *09/09/28 14:28:58 Notification ==>Binding web application(s) to site default-web-site begins...*
    *09/09/28 14:28:58 Notification ==>Binding web application(s) to site default-web-site ends...*
    *09/09/28 14:28:58 Notification ==>Deleting: /space/oracle11bpel/j2ee/oc4j_soa11wf/applications/coreman.ear*
    *09/09/28 14:28:58 Notification ==>Deleting: /space/oracle11bpel/j2ee/oc4j_soa11wf/applications/coreman/coreman.war*
    *09/09/28 14:28:58 Notification ==>Begin adding application: coreman to container runtime for: oc4j-develop-12420-default*
    *09/09/28 14:28:58 Notification ==>Operation failed with error:*
    Unable to find/read file META-INF/ra.xml in /space/oracle11bpel/j2ee/oc4j_soa11wf/connectors/coreman/coreman archive (IO Error: error in opening zip file)
    Deploy error: Deploy error: Operation failed with error:
    Unable to find/read file META-INF/ra.xml in /space/oracle11bpel/j2ee/oc4j_soa11wf/connectors/coreman/coreman archive (IO Error: error in opening zip file)
    I checked the Connectors directory for coreman but its not available. I even checked with my previous successful installations for this directory, its not even there too.
    The only difference i found in the error logs and the successful logs is ..
    *09/09/28 14:28:58 Notification ==>Begin adding application: coreman to container runtime for: oc4j-develop-12420-default*
    I did not see this line in the success log.
    Here is my environment information.
    I have an OPMN clustered environment. The second node in the cluster was down while this upgradation.
    There are two groups -- default_group and abcbpel_group
    abcbpel_group contains the soa instance. while default_group contains home instance.

    Hi.
    I have the same problem too.
    Had You found the solution?

  • Error while running SDK application in XIR3 environment

    Hi all,
    Thanks for your support provided so far.
    I have developed a SDK application using BOE SDK in BO XI-R2 environment. This application queries the CMC and provides the list of objects, users etc.,
    While running the  application in BO XI-R3 environment, when I invoke the Login button in my application, I'm getting the following Unhandled Exception as
    "Could not load File or Assembly: "CrystalDecisions.Enterprise.Framework.Infostore version=11.5.3300.0, culture =neutral......."
    Am I missing any Dll file to be included along with  the EXE?
    Can anyone help me in this regard?
    Thanks.

    Hello Bhuvan,
    Do you have BusinessObjects Enterprise (BOE) 3.0 or 3.1?  The .NET implementation was not released until BOE 3.1, so .NET applications wouldn't be expected to work against BOE 3.0.
    Assuming that you have BOE 3.1, then you also have to upgrade your application.  An Enterprise .NET application that references the XI R2 (v11.5) assemblies would not be supported for communicating with a BOE 3.1 system.
    On it's face, the error is saying that Enterprise 11.5 (XI R2) assemblies are missing.  The .NET SDK for BOE XIR2 has to be installed from the Enterprise installation CD.  It is not available as a stand alone installer or MSI.  
    Finally, you've made note of trying to include the Enterprise assemblies with an EXE.  BusinessObjects Enterprise is a web based application.  SAP Business Objects does not fully support using the Enterprise .NET SDK in Windows applications.  It may work, but any issues have to be duplicated in a web application before they'll be accepted for a possible fix.  Additionally, since the XIR2 Enterprise .NET SDK is not available in an stand alone MSI it becomes quite difficult to manage deploying the SDK to multiple workstations.
    Sincerely,
    Dan Kelleher

  • Unicode error while upgrading from 4.6 to ECC 6.0

    Dear All,
    I am getting unicode errror while upgrading from 4.6 to ECC 6.0, when iam trying to open downloaded file in excel.
    In debugging, error occurs while executing statment "CALL METHOD OF obj_ex_sheet " in the code given below:
    FORM open_downloaded_file_in_excel            *
    FORM open_downloaded_file_in_excel.
      DATA:
        lv_ole_books       TYPE ole2_object,
        lv_ole_sheets      TYPE ole2_object,
        lv_subrc           LIKE sy-subrc,
        lv_title(70)       TYPE c,
        lv_text1(70)       TYPE c,
        lv_text2(70)       TYPE c.
    start excel
      CREATE OBJECT obj_ex_sheet      'EXCEL.SHEET'.
      IF sy-subrc NE 0.
        lv_subrc = sy-subrc.
        FREE OBJECT obj_ex_sheet.
        PERFORM error_handling_ms_excel USING lv_subrc.
      ENDIF.
      CALL METHOD OF obj_ex_sheet     'Application' = obj_ex_app.
      IF sy-subrc NE 0.
        lv_subrc = sy-subrc.
        FREE OBJECT obj_ex_app.
        FREE OBJECT obj_ex_sheet.
        PERFORM error_handling_ms_excel USING lv_subrc.
      ENDIF.
      SET PROPERTY OF obj_ex_app 'Visible' = 1.
    open data file: main file
      CALL METHOD OF obj_ex_app        'Workbooks'  = lv_ole_books.
      CALL METHOD OF lv_ole_books      'Open'       = obj_ex_wbook
        EXPORTING #1  = gv_filename
                  #2  = 2
                  #3  = 0
                  #4  = 1
                  #5  = 0
                  #6  = 0
                  #7  = 1.
      IF sy-subrc NE 0.
        lv_subrc = sy-subrc.
        FREE OBJECT obj_ex_wbook.
        FREE OBJECT obj_ex_app.
        FREE OBJECT obj_ex_sheet.
        PERFORM error_handling_ms_excel USING lv_subrc.
      ENDIF.
      FREE OBJECT lv_ole_books.
      CALL METHOD OF obj_ex_wbook      'Worksheets' = lv_ole_sheets.
      CALL METHOD OF lv_ole_sheets     'Item'       = obj_ex_wsheet
        EXPORTING #1 = 1.
      FREE OBJECT lv_ole_sheets.
      GET PROPERTY OF obj_ex_wsheet    'UsedRange'  = obj_ex_usedrange.
      CALL METHOD  OF obj_ex_usedrange 'AutoFormat'
        EXPORTING #1 = 18.
      SET PROPERTY OF obj_ex_wsheet    'Name'       = sy-tcode.
      FREE OBJECT obj_ex_usedrange.
      PERFORM free_ole_objects.
      CALL FUNCTION 'FLUSH'
           EXCEPTIONS
                OTHERS = 0.
    ENDFORM.                              
    regards,
    Divya

    hi,
    In the OPEN DATASET STATEMENT ADD THE ENCODING ADDITION IN TEXT MODE.
    Regards,
    Balakumar.G
    Reward Points if helpful.

  • Keychain is no longer able to update itself when I upgrade an application

    Recently, I have been experiencing a problem with Keychain Access. Whenever I upgrade an application that stores a password in my Keychain, I get the dialog box asking me if I want to update my keychain to correspond to the new version of the application. However, consistently, if I say yes, I get the spinning wait cursor and my computer starts to lag something awful. After a few minutes of spinning, the dialog box does disappear, but my keychain is not updated. Also, my computer then runs at an abysmally slow rate until I restart it.
    The first couple of times I encountered this problem was only with the application Adium, and I thought the bug might be specific to that application, so I reported the bug to the Adium folks. (Other people had reported it as well, and no one seemed to have a solution.) However, I recently installed an iTunes upgrade, and I just experienced the exact same problem in iTunes, which leads me to believe that the problem is with OS X and/or Keychain Access and not with either Adium or iTunes.
    If I manually delete my passwords from my Keychain, the upgraded applications have no problem whatsoever adding "new" passwords to my Keychain; the problem only arises when attempting to update my Keychain passwords to work with the new version of whatever software I recently upgraded.
    For what it's worth, Keychain Access's "Keychain First Aid" finds no problems with my Keychain.
    Help?

    Well, barring a Hardware problem, then let me give you my whole spiel!
    Could be many things, we should start with this...
    "Try Disk Utility
    1. Insert the Mac OS X Install disc that came with your computer, then restart the computer while holding the C key.
    2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu. (In Mac OS X 10.4 or later, you must select your language first.)
    Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.
    3. Click the First Aid tab.
    4. Click the disclosure triangle to the left of the hard drive icon to display the names of your hard disk volumes and partitions.
    5. Select your Mac OS X volume.
    6. Click Repair. Disk Utility checks and repairs the disk."
    http://docs.info.apple.com/article.html?artnum=106214
    Then Safe Boot , (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, reboot when it finishes.
    The usual reason why updates fail or mess things up, or things don't load/run, is if Permissions are not fixed before & after every update, with a reboot... you may get a partial update when the installer finds it doesn't have Permissions to change one obscure little part of the OS, leaving you with a mix of OS versions.
    Some people get away without Repairing Permissions for years, some for only days.
    If Permissions are wrong before applying an update, you could get mixed OS versions, if Directory is the slightest messed up, who knows!
    If many Permission are repaired, or any Directory errors are found, you may need to re-apply some the latest/biggest updates again, or even do an A&I if you have enough free disk space.
    The combo update for PowerPC-based Macs...
    http://www.apple.com/support/downloads/macosx10411comboupdateppc.html
    The combo update for Intel-based Macs...
    http://www.apple.com/support/downloads/macosx10411comboupdateintel.html
    Repair Permissions before & after re-install, then reboot again each time.
    If all the above do not resolve the problem, then it's time for an Archive & Install, which gives you a new OS, but can preserve all your files, pics, music, settings, etc., as long as you have plenty of free disk space...
    http://docs.info.apple.com/article.html?artnum=107120
    I only use Software Update to see what is needed, then get them for real via...
    http://www.apple.com/support/downloads/
    That way I can wait a week or so, check the forums for potential problems, and get Permissions & such in order before installing.
    If it appears to be time for An Archive & Install, which gives you a new OS, but can preserve all your files, pics, music, settings, etc., as long as you have plenty of free disk space...
    http://docs.info.apple.com/article.html?artnum=107120
    Be sure to use Preserve Users & Settings.

  • Upgrading Hyperion applications from EPM System 11.1.2.1 and 11.1.2.2. to 11.1.2.3

    Hi,
    I am triyng to upgrade Hyperion classic applications from 11.1.2.1 and 11.1.2.2 to 11.1.2.3. I restored application's databases which has SQL database and upgraded applications successfully. But the other applications that have Oracle databases,  I can restore and upgrade the applications, but when I try to refresh database, it gives errors like that:
    com.hyperion.planning.olap.HspVerifyOutlineException: Verify Outline failed with the following errors:
    Error [100000800] detected in member "2012 Bakım": Shared member with no actual member
    And it is only giving these errors  for members which have Turkish characters. And it gives like as this error for member formulas which have Turkish characters:
    Error compiling formula for [] (line 1): unknown member name ["Sözleşme Türü Belirle"] in function [operator @X]
    This application is working in 11.1.2.1, but after I migrated it ot 11.1.2.3, it started to give these problems. I controlled my oracle database parameters and they look OK, I am sending them too:
    NLS_LANGUAGE                   AMERICAN                                
    NLS_TERRITORY                  AMERICA                                 
    NLS_CHARACTERSET               AL32UTF8                                
    NLS_SORT                       BINARY  
    How can I solve this problem ?
    Thanks
    Mehmet

    Hi Santy,
    Thanks for your suggestion. We updated Turkish characters in DB then it's solved. When we create a shared member which has Turkish characters from zero, it gives no error while the refresh. And  if we delete all shared members and create them again, it gives no error again. I think the problem is about upgrading.
    Regards,
    Mehmet

  • Upgrading oracle applications doubt

    Hi,
    I am upgrading oracle applications from 11.5.10.2 to R12.1.1 in linux OEL 5.
    I have successfully upgraded the db from 9.2.0.6 to 10.2.0.5. And also new R12.1.1 file system is laid.
    Now following upgrade guide, updated pfile as per R12 requirement and started the db with 10.2.0.5. [ Page 3-3 in R121 upgrade guide].
    The next step is to apply the patch AD 7461070 [point 9 in page 3-5 page of r121 upgrade guide].
    This patch needs to be applied on R12 application owner. But in my database release_name is 11.5.10.2.
    How can i apply this patch??
    Thanks
    Taher

    Hi Taher,
    1). First Created the R12 code tree. [Installed 11g db. Is this 11g DB HOME is of any use].This is the default ORACLE_HOME which comes with the installer -- You do not need to use it.
    Database Preparation Guidelines for an E-Business Suite Release 12.1.1 Upgrade [ID 761570.1]
    2). Upgraded the DB from to 10.2.0.5. So does it mean i can use this 10.2.0.5 with both 11i and R12 just created in step 1.Not at the same time, as you will end up having R12 accessing the database (see the doc referenced above).
    3). While applying the AD PATCH 7461070 i should copy adgrants to 10g ORALCE HOME. [not to 11g].
    applclone -> 11i appl. owner
    applr12 -> r12 appl. ownerYes, as you are still on 10g.
    I am posting the log file here. I knew that i can not apply R12 patch in 11.5.10.2 environment. What i did was i applied the patch R12_8576725 environment.
    As you have asked the log file.
    AutoPatch error:
    adprdf(): At line 3 in file u8576725.drv:
    This patch cannot be applied to your current release.
    Patch's intended release is "12.0.0"
    Your current release is "11.5.10.2"
    Freeing includes hash table
    Freeing fixes hash table
    Freeing basedons hash table
    Freeing entities hash tableHave you completed all the steps as per the upgrade document and run AutoConfig. I do not think this is relevant to which env file you are sourcing, as the RELEASE_NAME column value is still 11.5.10.2 and it should be 12.x.x (as you mentioned above). So, please mention the steps you have followed to upgrade this instance.
    Thanks,
    Hussein

  • What are the key points to beconsider while upgrading from 4.7 to ECC 6.0

    hai
    What are the key points to beconsider while upgrading from 4.7 to ECC 6.0
    please provide sufficient material
    points will be rewarded
    regards
    v.sridhar

    Hi Sridhar,
    Please visit the following links:
    http://service.sap.com/erp
    http://solutionbrowser.erp.sap.fmpmedia.com/ (Functional perspective)
    http://service.sap.com/instguides --> mySAP Business Suite Applications --> mySAP ERP --> mySAP ERP 2005 --> Upgrade
    http://help.sap.com/printdocu/core/Print46c/en/data/pdf/LOVC/LOVC.pdf
    For Functionality Differences pls refer to the below site -
    http://solutionbrowser.erp.sap.fmpmedia.com/
    After opening the site, please select the Source Release Version which is 4.6 b Then Select the Target Release Version which is "mySAP ERP 2005" or ECC 6.0
    Select the Solution Area like Financials, Human Capital Management, Sales....
    Select module like MM, PP, SD, and QM.....
    Click on Search
    then it displays the Release Version and the Delta Functionality. Which can be downloaded to a word document if required.
    And also check the release notes of ECC 6.0 in service.sap.com.
    When you are upgrading from 4.6C to ECC6
    Nothing major, follow the same process you'd follow if you were updating PI service packs in R/3 or enhancing data sources. Empty queues in RSA7 and lbwq. Also empty setup tables through lbwg as the upgrade doesn't like it if these tables contain data. This is all on the R/3 side (although you empty RSA7 by running each delta TWICE in BW).
    To transfer queues from lbwq to rsa7, execute jobs through LO cockpit (lbwe).
    Some of your data sources could also be using sm13 instead of lbwq, so do check it out as well.
    For installing ECC 6.0 you required a solution manager key. With out solution manager key you cannot install ECC6.0.
    For ECC 6.0 is called net weaver component here you have ABAP+JAVA stack.
    ECC6.0 supports UNCODE.
    For installing 4.6 you don't require solution manager key. It only having ABAP stack.
    4.6C supports NONUNICODE.
    Major difference is ECC6 is netwear product having WASJAVA+ABAP
    secondly support unicode apart from this we have other diff. you can get form master guide from service.sap.com/instguides.
    Please go through the link that is shown here and if there is any doubts then feel free to ask.
    Major difference is ECC6 is net weaver  product having WASJAVA+ABAP
    secondly support Unicode apart from this we have other diff. you can get from master guide from service.sap.com/instguides
    For installing ECC 6.0 you required a solution manager key. With out solution manager key you cannot install ECC6.0.
    For ECC 6.0 is called net weaver component here you have ABAP+JAVA stack.
    ECC6.0 supports UNCODE.
    For installing 4.6 you don't required solution manager key. It only having ABAP stack.
    4.6C supports NONUNICODE.
    Please also Refer sdn thread and make a small search where u can find lot of information Reg this
    olution Browser would give the differences (Features):
    http://solutionbrowser.erp.sap.fmpmedia.com/ Give source and target versions.
    Release Info:
    ECC 6.0:
    http://help.sap.com/saphelp_erp2005/helpdata/en/43/68805bb88f297ee10000000a422035/frameset.htm
    Refer below and search for posts on this topic on sdn
    There are so many differences between the version in different objects
    I
    These are the some of the settings that are differed in the two versions and in that two objects
    Please visit the following links:
    http://service.sap.com/erp
    http://solutionbrowser.erp.sap.fmpmedia.com/ (Functional prespective)
    http://service.sap.com/instguides --> mySAP Business Suite Applications --> mySAP ERP --> mySAP ERP 2005 --> Upgrade
    http://help.sap.com/printdocu/core/Print46c/en/data/pdf/LOVC/LOVC.pdf
    For Functionality Differences pls refer to the below site -
    http://solutionbrowser.erp.sap.fmpmedia.com/
    Upgrade from 4.6c to 6.0 ECC
    upgrade from 4.7 to ecc 6.0
    Please Do Reward If Really Helpful,
    Thanks and Regards,
    Sateesh.Kandula

  • While upgrading Adobe Creative Suite CS4 ME into Adobe Creative Suite CS5.5 Design Premium, I get an error saying This serial number is not of a qualifying product, please try another. I used to be able to get a code from customer service but I can't get

    While upgrading Adobe Creative Suite CS4 ME into Adobe Creative Suite CS5.5 Design Premium, I get an error saying This serial number is not of a qualifying product, please try another. I used to be able to get a code from customer service but I can't get to the chat. Please advise!!!!

    MoeGhazal I reviewed your account and it looks like you have have upgraded from a CS4 volume license for Design Premium to a retail upgrade of Design Premium 5.5.
    I also show that you made two purchases of CS5.5 Design Premium but the second purchase was canceled.  Please make sure you are utilizing the serial number which ends in 7886.
    If you are using the correct serial number then it is likely the installer will not recognize your volume license CS4 serial number as being valid for an upgrade.  If you can contact our support team then you can be walked through an unlocking procedure to allow you to proceed with the installation.  You can contact our support team directly at Contact Customer Care.  You may want to try installing a web browser you have not previously utilized.  It is likely a toolbar or some other software application is affecting your ability to access chat support successfully.
    If you are still unable to reach our support team then please verify the information under your account is accurate.  If you can please then update this discussion after confirming this then I can request a member of our support team contact you directly.
    Again I would recommend reaching out directly if possible as it will be the most efficient method of resolving your current error.

  • "Error occurred while packaging the application" Apple iOS, Launch on Device

    After several successful launches to a physical iOS device (iPad) I suddenly started getting this error "Error occurred while packaging the application". It occurs within a couple of seconds after I click "Run".  I am running the current FB 4.5.1 on Windows XP (SP 3).  I've tried cleaning the project, re-booting my computer, deleting and re-creating the project, and re-creating the iOS configuration; the issue remains.  I have not yet removed and re-installed FB.
    Below is my configuration info.
    Many thanks if someone has an idea about how to resolve this.

    Here are the log file contents for my most recent session.  Thanks.
    !SESSION 2011-08-21 20:33:58.125 -----------------------------------------------
    eclipse.buildId=I20100608-0911
    java.version=1.6.0_16
    java.vendor=Sun Microsystems Inc.
    BootLoader constants: OS=win32, ARCH=x86, WS=win32, NL=en_US
    Command-line arguments:  -os win32 -ws win32 -arch x86
    !ENTRY org.eclipse.ui 2 0 2011-08-21 20:34:11.781
    !MESSAGE Warnings while parsing the commands from the 'org.eclipse.ui.commands' and 'org.eclipse.ui.actionDefinitions' extension points.
    !SUBENTRY 1 org.eclipse.ui 2 0 2011-08-21 20:34:11.781
    !MESSAGE Commands should really have a category: plug-in='com.qnx.flashbuilder.multiplatform.qnx.ui', id='com.qnx.flashbuilder.multiplatform.qnx.ui.commands.OpenInfoCenter', categoryId='com.qnx.flashbuilder.multiplatform.qnx.ui.commands.category.help'
    !ENTRY org.eclipse.jface 2 0 2011-08-21 20:34:35.890
    !MESSAGE Keybinding conflicts occurred.  They may interfere with normal accelerator operation.
    !SUBENTRY 1 org.eclipse.jface 2 0 2011-08-21 20:34:35.890
    !MESSAGE A conflict occurred for CTRL+G:
    Binding(CTRL+G,
    ParameterizedCommand(Command(org.eclipse.jdt.ui.edit.text.java.search.declarations.in.work space,Declaration in Workspace,
    Search for declarations of the selected element in the workspace,
    Category(org.eclipse.search.ui.category.search,Search,Search command category,true),
    ,,true),null),
    org.eclipse.ui.defaultAcceleratorConfiguration,
    org.eclipse.ui.contexts.window,,,system)
    Binding(CTRL+G,
    ParameterizedCommand(Command(com.adobe.flexbuilder.as.editor.find.all.declarations.in.work space,Find All Declarations In Workspace,
    Category(com.adobe.flexbuilder.editorcore.navigation.category,Navigation,null,true),
    LegacyHandlerWrapper(ActionHandler(action=com.adobe.flexbuilder.as.editor.ui.actions.FindA llDeclarationsAction@1b57613)),
    ,,true),null),
    org.eclipse.ui.defaultAcceleratorConfiguration,
    com.adobe.flexide.editorcore.flexEditorScope,,,system)
    Binding(CTRL+G,
    ParameterizedCommand(Command(com.adobe.flexbuilder.as.editor.find.all.declarations.in.work space,Find All Declarations In Workspace,
    Category(com.adobe.flexbuilder.editorcore.navigation.category,Navigation,null,true),
    LegacyHandlerWrapper(ActionHandler(action=com.adobe.flexbuilder.as.editor.ui.actions.FindA llDeclarationsAction@1b57613)),
    ,,true),null),
    org.eclipse.ui.defaultAcceleratorConfiguration,
    com.adobe.flexbuilder.as.editor.context.packageexplorer,,,system)
    !SUBENTRY 1 org.eclipse.jface 2 0 2011-08-21 20:34:35.890
    !MESSAGE A conflict occurred for CTRL+SHIFT+G:
    Binding(CTRL+SHIFT+G,
    ParameterizedCommand(Command(org.eclipse.jdt.ui.edit.text.java.search.references.in.worksp ace,References in Workspace,
    Search for references to the selected element in the workspace,
    Category(org.eclipse.search.ui.category.search,Search,Search command category,true),
    ,,true),null),
    org.eclipse.ui.defaultAcceleratorConfiguration,
    org.eclipse.ui.contexts.window,,,system)
    Binding(CTRL+SHIFT+G,
    ParameterizedCommand(Command(com.adobe.flexbuilder.as.editor.find.all.references.in.worksp ace,Find All References In Workspace,
    Category(com.adobe.flexbuilder.editorcore.navigation.category,Navigation,null,true),
    LegacyHandlerWrapper(ActionHandler(action=com.adobe.flexbuilder.as.editor.ui.actions.FindA llReferencesAction@5ae487)),
    ,,true),null),
    org.eclipse.ui.defaultAcceleratorConfiguration,
    com.adobe.flexide.editorcore.flexEditorScope,,,system)
    Binding(CTRL+SHIFT+G,
    ParameterizedCommand(Command(com.adobe.flexbuilder.as.editor.find.all.references.in.worksp ace,Find All References In Workspace,
    Category(com.adobe.flexbuilder.editorcore.navigation.category,Navigation,null,true),
    LegacyHandlerWrapper(ActionHandler(action=com.adobe.flexbuilder.as.editor.ui.actions.FindA llReferencesAction@5ae487)),
    ,,true),null),
    org.eclipse.ui.defaultAcceleratorConfiguration,
    com.adobe.flexbuilder.as.editor.context.packageexplorer,,,system)
    !ENTRY com.adobe.flexbuilder.project 4 43 2011-08-21 20:34:57.328
    !MESSAGE Error occurred while packaging the application:
    !ENTRY com.adobe.flexbuilder.standalone 4 1 2011-08-21 20:35:12.140
    !MESSAGE p2:flexPlugin=C:/Program Files/Adobe/Adobe Flash Builder 4.5/eclipse/plugins/com.adobe.flexbuilder.flex_4.5.1.313231/
    !ENTRY com.adobe.flexbuilder.standalone 4 1 2011-08-21 20:35:12.140
    !MESSAGE p2:root=C:/Program Files/Adobe/Adobe Flash Builder 4.5/eclipse/
    !ENTRY com.adobe.flexbuilder.standalone 4 1 2011-08-21 20:35:12.218
    !MESSAGE p2: testWriteToFile C:/Program Files/Adobe/Adobe Flash Builder 4.5/eclipse/configuration/permission-check.txt
    !ENTRY com.adobe.flexbuilder.standalone 4 1 2011-08-21 20:35:12.218
    !MESSAGE p2: test file writable
    !SESSION 2011-08-21 21:14:52.000 -----------------------------------------------
    eclipse.buildId=I20100608-0911
    java.version=1.6.0_16
    java.vendor=Sun Microsystems Inc.
    BootLoader constants: OS=win32, ARCH=x86, WS=win32, NL=en_US
    Command-line arguments:  -os win32 -ws win32 -arch x86
    !ENTRY org.eclipse.ui 2 0 2011-08-21 21:14:58.265
    !MESSAGE Warnings while parsing the commands from the 'org.eclipse.ui.commands' and 'org.eclipse.ui.actionDefinitions' extension points.
    !SUBENTRY 1 org.eclipse.ui 2 0 2011-08-21 21:14:58.265
    !MESSAGE Commands should really have a category: plug-in='com.qnx.flashbuilder.multiplatform.qnx.ui', id='com.qnx.flashbuilder.multiplatform.qnx.ui.commands.OpenInfoCenter', categoryId='com.qnx.flashbuilder.multiplatform.qnx.ui.commands.category.help'
    !ENTRY org.eclipse.jface 2 0 2011-08-21 21:15:04.140
    !MESSAGE Keybinding conflicts occurred.  They may interfere with normal accelerator operation.
    !SUBENTRY 1 org.eclipse.jface 2 0 2011-08-21 21:15:04.140
    !MESSAGE A conflict occurred for CTRL+G:
    Binding(CTRL+G,
    ParameterizedCommand(Command(org.eclipse.jdt.ui.edit.text.java.search.declarations.in.work space,Declaration in Workspace,
    Search for declarations of the selected element in the workspace,
    Category(org.eclipse.search.ui.category.search,Search,Search command category,true),
    ,,true),null),
    org.eclipse.ui.defaultAcceleratorConfiguration,
    org.eclipse.ui.contexts.window,,,system)
    Binding(CTRL+G,
    ParameterizedCommand(Command(com.adobe.flexbuilder.as.editor.find.all.declarations.in.work space,Find All Declarations In Workspace,
    Category(com.adobe.flexbuilder.editorcore.navigation.category,Navigation,null,true),
    LegacyHandlerWrapper(ActionHandler(action=com.adobe.flexbuilder.as.editor.ui.actions.FindA llDeclarationsAction@118e146)),
    ,,true),null),
    org.eclipse.ui.defaultAcceleratorConfiguration,
    com.adobe.flexide.editorcore.flexEditorScope,,,system)
    Binding(CTRL+G,
    ParameterizedCommand(Command(com.adobe.flexbuilder.as.editor.find.all.declarations.in.work space,Find All Declarations In Workspace,
    Category(com.adobe.flexbuilder.editorcore.navigation.category,Navigation,null,true),
    LegacyHandlerWrapper(ActionHandler(action=com.adobe.flexbuilder.as.editor.ui.actions.FindA llDeclarationsAction@118e146)),
    ,,true),null),
    org.eclipse.ui.defaultAcceleratorConfiguration,
    com.adobe.flexbuilder.as.editor.context.packageexplorer,,,system)
    !SUBENTRY 1 org.eclipse.jface 2 0 2011-08-21 21:15:04.140
    !MESSAGE A conflict occurred for CTRL+SHIFT+G:
    Binding(CTRL+SHIFT+G,
    ParameterizedCommand(Command(org.eclipse.jdt.ui.edit.text.java.search.references.in.worksp ace,References in Workspace,
    Search for references to the selected element in the workspace,
    Category(org.eclipse.search.ui.category.search,Search,Search command category,true),
    ,,true),null),
    org.eclipse.ui.defaultAcceleratorConfiguration,
    org.eclipse.ui.contexts.window,,,system)
    Binding(CTRL+SHIFT+G,
    ParameterizedCommand(Command(com.adobe.flexbuilder.as.editor.find.all.references.in.worksp ace,Find All References In Workspace,
    Category(com.adobe.flexbuilder.editorcore.navigation.category,Navigation,null,true),
    LegacyHandlerWrapper(ActionHandler(action=com.adobe.flexbuilder.as.editor.ui.actions.FindA llReferencesAction@6dca9d)),
    ,,true),null),
    org.eclipse.ui.defaultAcceleratorConfiguration,
    com.adobe.flexide.editorcore.flexEditorScope,,,system)
    Binding(CTRL+SHIFT+G,
    ParameterizedCommand(Command(com.adobe.flexbuilder.as.editor.find.all.references.in.worksp ace,Find All References In Workspace,
    Category(com.adobe.flexbuilder.editorcore.navigation.category,Navigation,null,true),
    LegacyHandlerWrapper(ActionHandler(action=com.adobe.flexbuilder.as.editor.ui.actions.FindA llReferencesAction@6dca9d)),
    ,,true),null),
    org.eclipse.ui.defaultAcceleratorConfiguration,
    com.adobe.flexbuilder.as.editor.context.packageexplorer,,,system)
    !ENTRY com.adobe.flexbuilder.project 4 43 2011-08-21 21:21:34.046
    !MESSAGE Error occurred while packaging the application:

  • Issue while upgrading weblogic portal 8.1 to 9.2

    Hi All,
    I am upgrading my weblogic portal 8.1 application to 9.2. While following the process give at following link.
    http://download.oracle.com/docs/cd/E13214_01/wli/docs92/upgradetutorial/chap2.html
    I am getting following error in the update tab. Any suggestion would be greatful.
    weblogic.DDConverter failed to convert the EAR, weblogic-application.xml will not be
    upgraded :
    [DDConverter] START Converting EAR BEA[DDConverter] START Converting EJB-JAR
    .workshop/<App_name>/EJB/GenericStateless[DDConverter] END Converting EJB-JAR
    .workshop/<App_name>/EJB/GenericStateless[DDConverter] START Converting EJB-JAR
    content.jar[DDConverter] END Converting EJB-JAR content.jar[DDConverter] START Converting
    EJB-JAR content_repo.jar[DDConverter] END Converting EJB-JAR content_repo.jar[DDConverter]
    START Converting EJB-JAR netuix.jar[DDConverter] END Converting EJB-JAR
    netuix.jar[DDConverter] START Converting EJB-JAR p13n_ejb.jar[DDConverter] END Converting
    EJB-JAR p13n_ejb.jar[DDConverter] START Converting EJB-JAR prefs.jar[DDConverter] END
    Converting EJB-JAR prefs.jar[DDConverter] START Converting EJB-JAR wps.jar[DDConverter] END
    Converting EJB-JAR wps.jar[DDConverter] START Converting EJB-JAR
    .workshop/<App_name>/EJB/ProjectBeans[DDConverter] END Converting EJB-JAR
    .workshop/<App_name>/EJB/ProjectBeans[DDConverter] START Converting WAR
    adminPortal.war[DDConverter] END Converting WAR adminPortal.war[DDConverter] START
    Converting WAR datasync.war<May 4, 2010 5:16:20 PM PDT> <Info> <J2EE> <BEA-160192> <While
    upgrading weblogic.xml, encountered "debug" param "jsp-param". This param is unknown and
    will be removed> [DDConverter] END Converting WAR datasync.war[DDConverter] START Converting
    WAR wps-toolSupport.war[DDConverter] END Converting WAR wps-toolSupport.war[DDConverter]
    START Converting WAR <App_name><May 4, 2010 5:16:20 PM PDT> <Error> <J2EE> <BEA-160197>
    <Unable to load descriptor
    weblogic.application.ddconvert.ConvertCtx$VJarResourceLoader@b16f5f finder:
    weblogic.utils.classloaders.CodeGenClassFinder@106def2 annotation: /WEB-INF/web.xml of
    module null. The error is weblogic.descriptor.DescriptorException: Unmarshaller failed     at
    weblogic.descriptor.internal.MarshallerFactory$1.createDescriptor(MarshallerFactory.java:147
    )     at
    weblogic.descriptor.DescriptorManager.createDescriptor(DescriptorManager.java:280)     at
    weblogic.descriptor.DescriptorManager.createDescriptor(DescriptorManager.java:248)     at
    weblogic.application.descriptor.AbstractDescriptorLoader2.getDescriptorBeanFromReader(Abstra
    ctDescriptorLoader2.java:749)     at
    weblogic.application.descriptor.AbstractDescriptorLoader2.createDescriptorBean(AbstractDescr
    iptorLoader2.java:376)     at
    weblogic.application.descriptor.AbstractDescriptorLoader2.loadDescriptorBeanWithoutPlan(Abst
    ractDescriptorLoader2.java:720)     at
    weblogic.application.descriptor.AbstractDescriptorLoader2.loadDescriptorBean(AbstractDescrip
    torLoader2.java:729)     at
    weblogic.servlet.internal.WebAppDescriptor.getWebAppBean(WebAppDescriptor.java:134)     at
    weblogic.application.ddconvert.WarConverter.convertDDs(WarConverter.java:60)     at
    weblogic.application.ddconvert.EarConverter.convertModules(EarConverter.java:125)     at
    weblogic.application.ddconvert.EarConverter.convertDDs(EarConverter.java:84)     at
    weblogic.application.ddconvert.DDConverter.runBody(DDConverter.java:157)     at
    weblogic.utils.compiler.Tool.run(Tool.java:158)     at
    weblogic.utils.compiler.Tool.run(Tool.java:115)     at
    weblogic.application.ddconvert.DDConverter.main(DDConverter.java:177)     at
    weblogic.DDConverter.main(DDConverter.java:10)Caused by: com.bea.xml.XmlException:
    weblogic.descriptor.BeanAlreadyExistsException: Bean already exists:
    "weblogic.j2ee.descriptor.ListenerBeanImpl@788e8862(/Listeners[com.bea.wlw.runtime.core.serv
    let.WebappContextListener])"     at
    com.bea.staxb.runtime.internal.util.ReflectionUtils.invokeMethod(ReflectionUtils.java:54)     
    at
    com.bea.staxb.runtime.internal.RuntimeBindingType$BeanRuntimeProperty.setValue(RuntimeBindin
    gType.java:483)     at
    com.bea.staxb.runtime.internal.AttributeRuntimeBindingType$QNameRuntimeProperty.fillCollecti
    on(AttributeRuntimeBindingType.java:385)     at
    com.bea.staxb.runtime.internal.MultiIntermediary.getFinalValue(MultiIntermediary.java:52)     
    at
    com.bea.staxb.runtime.internal.AttributeRuntimeBindingType.getFinalObjectFromIntermediary(At
    tributeRuntimeBindingType.java:145)     at
    com.bea.staxb.runtime.internal.UnmarshalResult.unmarshalBindingType(UnmarshalResult.java:185
    )     at
    com.bea.staxb.runtime.internal.UnmarshalResult.unmarshalDocument(UnmarshalResult.java:154)     
    at com.bea.staxb.runtime.internal.UnmarshallerImpl.unmarshal(UnmarshallerImpl.java:65)     at
    weblogic.descriptor.internal.MarshallerFactory$1.createDescriptor(MarshallerFactory.java:136
    )     ... 15 moreCaused by: weblogic.descriptor.BeanAlreadyExistsException: Bean already
    exists:
    "weblogic.j2ee.descriptor.ListenerBeanImpl@788e8862(/Listeners[com.bea.wlw.runtime.core.serv
    let.WebappContextListener])"     at
    weblogic.descriptor.internal.ReferenceManager.registerBean(ReferenceManager.java:207)     at
    weblogic.j2ee.descriptor.WebAppBeanImpl.setListeners(WebAppBeanImpl.java:965)     at
    sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)     at
    sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)     at
    sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)     at
    java.lang.reflect.Method.invoke(Method.java:585)     at
    com.bea.staxb.runtime.internal.util.ReflectionUtils.invokeMethod(ReflectionUtils.java:48)     
    ... 23 more.> weblogic.application.ddconvert.DDConvertException:
    weblogic.descriptor.DescriptorException: Unmarshaller failed     at
    weblogic.application.ddconvert.WarConverter.convertDDs(WarConverter.java:79)     at
    weblogic.application.ddconvert.EarConverter.convertModules(EarConverter.java:125)     at
    weblogic.application.ddconvert.EarConverter.convertDDs(EarConverter.java:84)     at
    weblogic.application.ddconvert.DDConverter.runBody(DDConverter.java:157)     at
    weblogic.utils.compiler.Tool.run(Tool.java:158)     at
    weblogic.utils.compiler.Tool.run(Tool.java:115)     at
    weblogic.application.ddconvert.DDConverter.main(DDConverter.java:177)     at
    weblogic.DDConverter.main(DDConverter.java:10)Caused by:
    weblogic.descriptor.DescriptorException: Unmarshaller failed     at
    weblogic.descriptor.internal.MarshallerFactory$1.createDescriptor(MarshallerFactory.java:147
    )     at
    weblogic.descriptor.DescriptorManager.createDescriptor(DescriptorManager.java:280)     at
    weblogic.descriptor.DescriptorManager.createDescriptor(DescriptorManager.java:248)     at
    weblogic.application.descriptor.AbstractDescriptorLoader2.getDescriptorBeanFromReader(Abstra
    ctDescriptorLoader2.java:749)     at
    weblogic.application.descriptor.AbstractDescriptorLoader2.createDescriptorBean(AbstractDescr
    iptorLoader2.java:376)     at
    weblogic.application.descriptor.AbstractDescriptorLoader2.loadDescriptorBeanWithoutPlan(Abst
    ractDescriptorLoader2.java:720)     at
    weblogic.application.descriptor.AbstractDescriptorLoader2.loadDescriptorBean(AbstractDescrip
    torLoader2.java:729)     at
    weblogic.servlet.internal.WebAppDescriptor.getWebAppBean(WebAppDescriptor.java:134)     at
    weblogic.application.ddconvert.WarConverter.convertDDs(WarConverter.java:60)     ... 7
    moreCaused by: com.bea.xml.XmlException: weblogic.descriptor.BeanAlreadyExistsException:
    Bean already exists:
    "weblogic.j2ee.descriptor.ListenerBeanImpl@788e8862(/Listeners[com.bea.wlw.runtime.core.serv
    let.WebappContextListener])"     at
    com.bea.staxb.runtime.internal.util.ReflectionUtils.invokeMethod(ReflectionUtils.java:54)     
    at
    com.bea.staxb.runtime.internal.RuntimeBindingType$BeanRuntimeProperty.setValue(RuntimeBindin
    gType.java:483)     at
    com.bea.staxb.runtime.internal.AttributeRuntimeBindingType$QNameRuntimeProperty.fillCollecti
    on(AttributeRuntimeBindingType.java:385)     at
    com.bea.staxb.runtime.internal.MultiIntermediary.getFinalValue(MultiIntermediary.java:52)     
    at
    com.bea.staxb.runtime.internal.AttributeRuntimeBindingType.getFinalObjectFromIntermediary(At
    tributeRuntimeBindingType.java:145)     at
    com.bea.staxb.runtime.internal.UnmarshalResult.unmarshalBindingType(UnmarshalResult.java:185
    )     at
    com.bea.staxb.runtime.internal.UnmarshalResult.unmarshalDocument(UnmarshalResult.java:154)     
    at com.bea.staxb.runtime.internal.UnmarshallerImpl.unmarshal(UnmarshallerImpl.java:65)     at
    weblogic.descriptor.internal.MarshallerFactory$1.createDescriptor(MarshallerFactory.java:136
    )     ... 15 moreCaused by: weblogic.descriptor.BeanAlreadyExistsException: Bean already
    exists:
    "weblogic.j2ee.descriptor.ListenerBeanImpl@788e8862(/Listeners[com.bea.wlw.runtime.core.serv
    let.WebappContextListener])"     at
    weblogic.descriptor.internal.ReferenceManager.registerBean(ReferenceManager.java:207)     at
    weblogic.j2ee.descriptor.WebAppBeanImpl.setListeners(WebAppBeanImpl.java:965)     at
    sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)     at
    sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)     at
    sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)     at
    java.lang.reflect.Method.invoke(Method.java:585)     at
    com.bea.staxb.runtime.internal.util.ReflectionUtils.invokeMethod(ReflectionUtils.java:48)     
    ... 23 moreweblogic.descriptor.DescriptorException: Unmarshaller failed
    Thanks in advance.
    Regards,
    Sandeep K

    Hi,
    Upgrade report is giving me following warning. Is my above problem is due to this warning?
    The project <Application Name> references netui-pageflow.jar, which contains an 8.1 WLS XMLBean, com.bea.wlw.netui.pageflow.schema.webapp23.EjbLinkDocument. Regenerate the JAR to use Apache XMLBeans.
    If yes then how to resolve this issue. Any suggestion guys.
    Thanks in advance.
    Regards,
    SandeepK

Maybe you are looking for

  • Quantity and Value consumption for Packaging Materials

    Dear Experts, My client having retails stores all over India and there is problem in packaging materials consumption. Now we are followed below mentioned process. We have created STO supplying site is ABC to receiving site is 9999.After PGI the same

  • Aperture duplicating photo stream photos?

    Hi. I recently acquired Aperture 3.4, and i'm very confused by the photo stream feature. I've always had some problem with duplicates, be it on an iPad, or iPhoto, but now the problem is even worse. Whenever I delete a photo from Photo Stream, every

  • Need help using list item as to filter hire_date

    hi to all, how can i use the list item as to filter hire_date based on the elements inside the list item it goes something like this HIRE_DATE----------------LIST_ITEM=JAN 01-JAN-10 02-JAN-10 03-JAN-10 HIRE_DATE----------------LIST_ITEM=FEB 01-FEB-10

  • Key/erase a harness wire

    So, as soon as this posts I'll probably see five how-to's on the "Discussions like this" box, but here goes...  I've been using the chroma key effect successfully to get different backgrounds behind a subject, but now my daughter wants to add a "flyi

  • Will iPhone 3GS be outdated by iOS5?

    From what I'm guessing, the iPhone 3GS will be outdated by iOS5 is released, I just bought my iPhone 3GS 2 months ago, can I buy an iPhone 4 without messing with my contract or buying the phone without a contract?  < Does that make sense?> Because, I