While upgrading iphoto database, the program stops responding.
I updated my iPhoto, but when the progam opens it says it must upgrade the iphoto library. When I do this, it stops responding near the end of the upgrade.
Try the following:
1 - launch iPhoto with the Command+Option keys held down and rebuild the library.
2 - Run Option #4, Rebuild Database, followed by Option #1 if needed.
OT
Similar Messages
-
I have Adobe Photoshop Album 1.0 & suddenly cannot send photos thru e-mail. It looks like it's working ok; but when I hit Send nothing happens and the program stops responding. Any suggestions?
I have starter 3.0 and cannot share pictures via outlook express. Evidently that version is discontinued and my outlook express does not support the MAPI that is required. I think the only solution is to upgrade to photoshop
elements or to send photos as attachment to your e-mail. I have the same problem using Zoom Browser EX sending photos via internet. I spent a whole day trying to resove this issue and have exhausted all options. Just like "Instant share" in HP image Zone that was replace by photoshop album starter 3.0 and now it is out dated. -
The program stops responding to delete messages, changing to another message. How do I fix it?
My program won't delete messages easily. I have to sit and wait for each to delete. It won't change to another message after deleting, just sits on the one it landed on. If I close the program several times, it may work normally for a while, but then reverts back to not responding. I am getting very frustrated with the program not responding to commands.
Besides that problem, I have 5 different inboxes, and can't get rid of the ones I don't use. I have 2 trash files, and can't get rid of those either. I don't want to just delete the whole program and go to another provider because I have professional papers stored here and don't want to lose them.What is your anti-virus software?
-
While upgrading iphoto database, iphoto stops responding.
Iphoto will not open, I have tried to restore it from time machine, I have tried to upgrade to '11 and it keeps shuting down, stops responding. I know my pictures are still there, I can see them in finder. Any ideas!
ThanksPost the Crash Log.
It's at Home / Library / Logs / Crash-Reporter / iphoto.crash.log
Double click on the file and it will open in the Console. Copy and Paste it in here. -
I'm using a dell computer Inspiron 530
Refer to this article:
iTunes for Windows Vista or Windows 7: Troubleshooting unexpected quits, freezes, or launch issues
http://support.apple.com/kb/TS1717 -
Program stops responding on adding a text
I'm doing a lesson from the official tutorial.
When I attempt to add a new text layer the program stops responding. Windows Task Manager says that Photoshop is working, but nothing happen. Though it seems like the system is working on something.
Can I fix this myself?
Attached fileAll settings are default.
PC specs:
QuadCore Intel Core i7-930
6144 MB (DDR3-1333)
NVIDIA GeForce GTX 570 (1280 MB)
Windows 7 SP1 x64
Photoshop CC 2014.2.0 x64
By the way, looks like the problem has gone. -
Upgrade iPhoto database taking forever, 12 hours and counting.the Apple tech staff migrated data from my old MacBoo to New McBk Pro. Then the Upgrading process was started and ran for 24 hours before I finally Force Quit. BTW, iPhoto didn't show up as Not Responding, but I figured there was some glitch and Force Quit. THen started up again and now 12 hours and counting. Am I missing something?
Upgrade iPhoto database taking forever, 12 hours and counting.the Apple tech staff migrated data from my old MacBoo to New McBk Pro. Then the Upgrading process was started and ran for 24 hours before I finally Force Quit. BTW, iPhoto didn't show up as Not Responding, but I figured there was some glitch and Force Quit. THen started up again and now 12 hours and counting. Am I missing something?
-
I CAN NOT CONNECT TO THE INTERNET WHILE USING MY IPAD I KEEP GETTING A MESSAGE SAYING SAFARI COULD NOT OPEN THE PAGE BECAUSE THE SERVER STOPPED RESPONDING PLEASE HELP THANK YOU
Try the following:
1. Turn router off for 30 seconds and on again
2. Settings>General>Reset>Reset Network Settings
3. Reset iPad; hold the Sleep and Home button down until you see the Apple Logo -
When I start Photoshop the program stop functioning and shuts down, I just upgraded the memory so the computers capacity should be fine.
Moving the discussion to Photoshop General Discussion.
Thanks,
Atul Saini -
Why do I constantly get the msg...Safari could not open the page because the server stopped responding? I just upgraded to the IOS 8.2. Nothing else seems to be affected.
Try some basic troubleshooting:
(A) Try reset iPad
Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
(B) Try reset all settings
Settings>General>Reset>Reset All Settings -
Iphoto stuck "upgrading iphoto database"
I upgraded to the new version of iphoto with Yosemite but can not get it to launch properly. It sits with the message "upgrading iphoto database" for seemingly ever. I've left it going overnight and still nothing. I've forced quit, restarted, erased and redownloaded iphoto, all with the same results. Any help or how to fix would be appreciated.
Option 1
Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Repair Database. If that doesn't help, then try again, this time using Rebuild Database.
If that fails:
Option 2
Download iPhoto Library Manager and use its rebuild function. (In early versions of Library Manager it's the File -> Rebuild command. In later versions it's under the Library menu.)
This will create an entirely new library. It will then copy (or try to) your photos and all the associated metadata and versions to this new Library, and arrange it as close as it can to what you had in the damaged Library. It does this based on information it finds in the iPhoto sharing mechanism - but that means that things not shared won't be there, so no slideshows, books or calendars, for instance - but it should get all your events, albums and keywords, faces and places back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one.
Regards
TD -
Safari could not open the page because the server stopped responding error.
This has only begun to happen after the ios5 upgrade.
Steps to recreate the issue:
In safari enter URL https://portal.keane.com
Safari waits a while and returns the error "Safari could not open the page because the server stopped responding error."
I see this behavior both on my iPhone and iPad after the iOS 5 upgrade.
Try it with any browser in your Mac or PC and this does not happen.
This didn't happen in the earlier versions of ios either, in either device.I just tried it from a pad on ios 5 and it worked. It took a real long tome and i assumed it had tomed out, but it finally came up to a log in screen for keane something. I note this is a secure server (https). So it is not a safari problem. It may bebthat their secure server can only handle so many requests at one time? Try again, and give it time.
-
Safari could not open this page because the server stopped responding
Since upgrading to 4.2 I get this message a lot even though the page loads anyway:
"safari could not open this page because the server stopped responding"Have you Checked your firewall setting(of both windows and of the Anti Virus).
I was Having the same Problem, and tried everything from the Internet, then i realised that firewall can mess things up and so i immediately TURNED OFF the firewall and restarted my Network and my Ipod ....THE INTERNET WORKED
i am using win vista and McAfee.
want to add few more things:
1> adjusting brightness has nothing to do with Networking.
2> Multiplayer/online games also get into problem due to antivirus firewall(AVG anitvirus specially.....Disabling firewall or setting it to permit the Device/program to access Internet WORKS)
3>to know if the problem is with the Idevice or with the System, try connecting other devices to that netwrk, if non of them connect then its the problem with the System/Network/OS and not with the Device........Resetting you Idevice again and again will not Solve the problem.
Happy Idevicing -
I have been using Thunderbird for a couple of years. On Friday 10 Apr my home email account stopped sending either new messages or replying to incoming emails. In addition I have Thunderbird get my work email and I can send and receive email just fine. I can also send email from my android phone and via the web.
The message that has started coming up is the following:
An error occurred while sending mail. The mail server responded: 5.7.1 [P4] Message blocked due to spam content in the message.. Please check the message and try again.
I have tried reinstalling Thunderbird but nothing changed, I tried changing the port from 25 to 587 to 465 but nothing changed. I do not understand what is going on as on Wednesday Apr 8 everything was working just fine.I have just tried ringing RCN and they tell me that because I am not using an RCN email as such they can not help but he suggested that it was a filter in Thunderbird but I have not set any filters and can not see if there are any or how to change them. The only way sending my website url right now is to make it not look like a url. Where do I need to look to solve this as I first wrote last week everything was fine.
-
When I send mail, I keep getting this message.
An error occurred while sending mail. The mail server responded: "JunkMail rejected - 71-12-190-31.dhcp.leds.al.charter.com ([127.0.0.1])
[71.12.190.31]:52956 is in an RBL, see
http://www.spamhaus.org/query/bl?ip=71.12.190.31". Please check the message recipient [email protected] and try again.
How do I get rid of this problem?
WNSHi there,
If you have a closer look at message you are receiving it already states the problem. The domain 71-12-190-31.dhcp.leds.al.charter.com is blacklisted by spamhaus.org (is in an RBL).
Your TB is (my guess) setup to send the message directly to the recipient.
As a rule of thumb the majority of mail sent from a dynamic dns address (the kind of address you are getting from your ISP) is blacklisted as a precaution against spam abuse due to virus/trojan infected PC's.
Nothing you can change there. Stop sending the message directly and use your ISP's account instead.
/Frans
Maybe you are looking for
-
Moving a Family Member from my Itunes to Their Own for Family Sharing
Dear Forum i want to Move a Family Member from my Itunes to Their Own for Family Sharing. will setting up their phone for their own iTunes account which they never had before disturb bought apps on my account or iTunes Match?
-
Problems using a printer shared by a Windows XP PC
I'm having problems seeing my shared printers on my mac mini. The shared printers are hooked up to a Windows XP PC. There is another PC on the network that is running Windows 7. All 3 machines can access one another with respect to files. I have the
-
Using 8 GB Flash Drive in 2nd gen mini
I have a 2nd gen mini and recently the 4 GB hard drive died. I read that these can also use Flash Memory in place of the drive. I installed it using IFIXIT.COM's directions and everything worked out fine putting it back together but it still shows a
-
FWDEngineering.execute() nullpointerException when engineering from logical to physical model
Dear Community, During the "engineer to relational model" from the logical model I got a long time the correct behaviour. Now I get the following error in the log file: "ERROR FWDEngineering - FWDEngineering.execute()" NullpointerException The model
-
Workflow not trigerring for Clock-in/clock new entries or corrections
Dear All, I am using the workflow ws12300111 template for clock-in/clock out for approval to manager. Is this appropriate one or anything else is available, whenever i raise request for the clock-in/clock out change in ess a new request is getting ge