While user is posting the goods delivery. He was getting error "Field selec

Hello
SAP Experts
i am getting an error
While user is posting the goods delivery. He was getting error "Field selection for movement type 981/account 1830200817(stock transfer account) differs for customer goods movement(015)" - Message no M7093.
Thanks & Regards
Narendra G

Hi Narendra,
Go to SE38 and run report RM07CUFA .This report gives you details as it compares FI and MM customizing ( mvmt type / acct G/L accnt no)
Either you have to change the setting of the GL or the movement type..as per business requirement.
This report will exactly give you which field has the conflict.
Probable some field is required in FI and suppressed in MM or vice versa.. check it out.
Regards,
SAPFICO

Similar Messages

Components were not consumed while posting the goods receipt through VL32N

Hi Experts,
We are into technical upgrade. We are upgrading from 4.7 to ECC 6.0. We are facing one issue. The issue is while posting the goods receipt for the subcontracting shceduling agreement through VL32N (Inbound Delivery) component materials were not consumed. While displaying the material document for the GR, could not find any compponent materials consumed with movement type 543, where as if I use the MIGO transaction code for the same inbound delivery, I could see the component materials were consumed with movement type 543.
Could anybody tell us how to fix this issue if they come across.
Appreciate your reply.
Regards
Bala

Hi,
Try checking below SAP notes
Note 645119 - Problems with subcontracting using delivery
338119 - Goods receipt in inbound delivery for SC order
Hope this helps
Reg
Dheeraj

Idoc used by CRM to post the outbound delivery in R/3 while saving the sale

Hi,
Can any one tell me which idoc (from the r/3 system) the crm system calls while creating a inbound delivery for the sales order created in crm.
I am having fields like Transaction Type, Ext. Reference cust, Delivery Control etcwhich are there in the CRM.These fields need to copied to the R/3 in the tables LIKP and LIPS.
The process of creating the outbound delivery is automatic means when a sales order is created and saved in CRM ,the delivery is created in the R/3 (note: the order is not moved to r/3 ..Only delivery is created).
I need the idoc which is used by the CRM system to post the outbound delivery and any badi .so that I can extend the idoc segments and use the badi to populate the data.
Need your inputs on this.
Thanks in advance.
Regards
Shafath

Hi All,
For this requirement IDOC's are not used.Bapi is used.
The BAPI BAPI_DELIVERYPROCESSING_EXEC will be enhanced to add the new fields into the BAPI structure.
The BADI /SPE/BAPI_DLVEXEC_EX and the user exit EXIT_SAPLV50R_CREA_001 will be used to populate the data into the new fields created in the BAPI structure and the new fields added into the tables LIKP and LIPS.
Regards
Shafath

Error while posting the Goods Receipt

Hi Friends,
I am having an issue while posting the Goods Receipt.
I am getting the error "Balance not zero: 1.000,00- debit: 0,00 credit: 1.000,00". I am using the Purchase Order with Account Assignment category P and K. When ever I used the account assignment category, I am getting this type of error. I have checked the configuration and every thing is OK. System is not able to debit the G/L account which is mentioned in the Purchase Order, hence the problem. However, I think system is able to get the G/L account (to Credit the amount) from Automatic Account determination.
Would like to know if any one come across similar type of problem and resolved it.
We have recently upgraded the system from 4.7 to ECC 6.0.
Apprciate the help.
Thank you,
Prakash

Hi
Thank you for the reply.
I have checked what you have mentioned. While creating PO it is determining the G/L account automatically through the assignments in OBYC. Even then I am getting the error while doing the Goods Receipt.
Any one is having any idea?
Thank you,
Prakash
Edited by: Prakash KM on Dec 17, 2010 6:26 PM

Changing the G/L Account while Posting the Goods Receipts in MIGO

Hi All,
I have requirement in which G/L Account needs to be changed based on some validation while Posting the Goods Receipt in MIGO.
I have created exit in OBBH by copying the standard SAP Program RGGBS800 in view V_T80D.
I changed following entry in view V_T80D:
GBLS     ZGGBS800     Val/sub:Exits for substitution
Now Inside program ZGGBS800, I have written the logic to change the BSEG-HKONT value with the new G/L Account which gets called inside the standard function module G_VSR_SUBSTITUTION_CALL.
FORM U999.
   DATA : V_HKONT TYPE BSEG-HKONT.
   clear : V_HKONT.
   SELECT SINGLE SAKNR FROM ZMASH1 INTO V_HKONT WHERE MATNR = BSEG-MATNR AND WERKS = BSEG-WERKS.
     IF SY-SUBRC EQ 0.
       BSEG-HKONT = V_HKONT.
     ENDIF.
ENDFORM.
After the execution of the above code the value of BSEG-HKONT changes with new value of V_HKONT but after this when I go further in Standard SAP code of function module G_VSR_SUBSTITUTION_CALL, there is one subroutine FORM EXP_TAB_009_BSEG being called which changes the value of BSEG-HKONT to initial value of HKONT also while moving the data from BSEG to TEMP_STRUCT it doesn't passes the HKONT value, which I want it be passed as I want the changed value to be passed finally to OUT_RESULT. Please look at the code below.
Following is the SAP standard code of subroutione FORM EXP_TAB_009_BSEG :
FORM EXP_TAB_009_BSEG
         USING
           IN_ORIG STRUCTURE        BSEG
        CHANGING
           OUT_RESULT STRUCTURE     BSEG
           B_RESULT.
DATA: ORIG LIKE BSEG.
DATA: BEGIN OF TEMP_STRUCT,
         ABPER                          LIKE   BSEG-ABPER,
         AUGGJ                          LIKE   BSEG-AUGGJ,
         DOCLN                          LIKE   BSEG-DOCLN,
         FIPOS                          LIKE   BSEG-FIPOS,
         FISTL                          LIKE   BSEG-FISTL,
         FKBER                          LIKE   BSEG-FKBER,
         FKBER_LONG                     LIKE   BSEG-FKBER_LONG,
         GEBER                          LIKE   BSEG-GEBER,
         GMVKZ                          LIKE   BSEG-GMVKZ,
         GRANT_NBR                      LIKE   BSEG-GRANT_NBR,
         HKTID                          LIKE   BSEG-HKTID,
         HZUON                          LIKE   BSEG-HZUON,
         INTRENO                        LIKE   BSEG-INTRENO,
         MEASURE                        LIKE   BSEG-MEASURE,
         PARGB                          LIKE   BSEG-PARGB,
         PPA_EX_IND                     LIKE   BSEG-PPA_EX_IND,
         PPRCT                          LIKE   BSEG-PPRCT,
         PRCTR                          LIKE   BSEG-PRCTR,
         PRODPER                        LIKE   BSEG-PRODPER,
         PRZNR                          LIKE   BSEG-PRZNR,
         PSEGMENT                       LIKE   BSEG-PSEGMENT,
         SAMNR                          LIKE   BSEG-SAMNR,
         SCTAX                          LIKE   BSEG-SCTAX,
         SEGMENT                        LIKE   BSEG-SEGMENT,
         SGTXT                          LIKE   BSEG-SGTXT,
         SRTYPE                         LIKE   BSEG-SRTYPE,
         UZAWE                          LIKE   BSEG-UZAWE,
         XREF1                          LIKE   BSEG-XREF1,
         XREF2                          LIKE   BSEG-XREF2,
         XREF3                          LIKE   BSEG-XREF3,
         ZUONR                          LIKE   BSEG-ZUONR,
         ZZBUSPARTN                     LIKE   BSEG-ZZBUSPARTN,
         ZZCHAN                         LIKE   BSEG-ZZCHAN,
         ZZLOB                          LIKE   BSEG-ZZLOB,
         ZZLOCA                         LIKE   BSEG-ZZLOCA,
         ZZPRODUCT                      LIKE   BSEG-ZZPRODUCT,
         ZZREGION                       LIKE   BSEG-ZZREGION,
         ZZSPREG                        LIKE   BSEG-ZZSPREG,
         ZZSTATE                        LIKE   BSEG-ZZSTATE,
         ZZUSERFLD1                     LIKE   BSEG-ZZUSERFLD1,
         ZZUSERFLD2                     LIKE   BSEG-ZZUSERFLD2,
         ZZUSERFLD3                     LIKE   BSEG-ZZUSERFLD3,
         END OF TEMP_STRUCT.
IF IN_ORIG = BSEG .
    B_RESULT = B_FALSE.
    OUT_RESULT = IN_ORIG.
    EXIT.
ENDIF.
MOVE-CORRESPONDING BSEG TO TEMP_STRUCT.
OUT_RESULT = IN_ORIG.
MOVE-CORRESPONDING TEMP_STRUCT TO OUT_RESULT.
IF IN_ORIG = OUT_RESULT .
    B_RESULT = B_FALSE.
ELSE.
    B_RESULT = B_TRUE.
ENDIF.
BSEG = OUT_RESULT.
ENDFORM.                               " EXP_TAB_009_BSEG
I need the value of BSEG-HKONT should be passed to OUT_RESULT-HKONT.
I am not able to find any userexit or BADI for this.
Please guide me on this.
Thanks,
Chandravadan
Edited by: Chandravadan Jaiswal on May 8, 2009 2:18 PM
Edited by: Chandravadan Jaiswal on May 8, 2009 3:45 PM

Hi
I also need to change hkont while posting MIGO and MIRO transaction..
Any suggestion for this?
Here's my problem.. Substitution of account(HKONT) when posting in MIGO/MIRO

Problem with posting free goods delivery

I need some help,
when I'm posting the goods issue in VL02N I'm receiving following error:
<i>Item   Material           Description                                   Delivery qty UoM Batch
000001 XAK 256 N50 CB P35 CN UR V35/ AUTOALARM DOG 50                             1 ST
       E KO 014
Order 2000574 cannot carry revenues</i>
First I don't know why the order no is 2000574 when the delivery was done to order 2065030645, but it's not a problem to me, the problem is why I'm getting the error 'the order cannot carry revenues' because the delivery is made to an free goods order and the order has values of 0 in pricing conditions.
Looking forward to reciving some help
regards,
Martin

Hi Marcin
Check the following:
Free Goods
Also referred as discount in kind. Business can consider to offer discount not in monetary terms but in the form of free goods, ie goods provided without any charge when a particular quantity of material is purchased by the Customer. SAP provides two methods:
a)     Inclusive
b)     Exclusive
IMGSDBasic functionsFree Goods
Condition technique for free goods
Select maintain Pricing procedure
Standard procedure
Copy as ur Pricing procedure
Copy all
Save
The Pricing procedure contains the Condition Type as NA00free goods
NA00 has the Access sequence as NA00
Select activate free goods determination
Assign the procedure to sales areas using document procedure and customer procedure
Select your sales area and assign
S002      SB     SX          A     1     ZA0001
Save
A= Document Procedure (determined based on doc)
1= Customer procedure (Determined from customer master)
We have to maintain free goods condition records
SAP menuLogisticsSDMaster dataConditionsFree GoodsVBN1 Create
Discount type: NA00
Continue
Enter sales org, distribution channel and Customer
By default the entry screen is for Inclusive, Select Exclusive button to maintain Condition Record for Exclusive
Inclusive: Continue, as it is to maintain the record
Material: Product ID
Min Qty: Minimum qty required to be ordered (10)
From: From how many units free goods are considered ie 10
Unit=Unit of measurement of ordered product
Are free Goods: quantity free
Add= The unit of measurement of free goods item
Calculation: 1 Prorata
save
What is the other requirement?
The pricing procedure should contain the Condition type R100 that is free goods condition type. This condition type in the Procedure has requirement as 55
(55 means only if the item is free goods then only value of R100 to be used in the calculation. Value= controlled by Alt condition base value 28 which states that discount should be 100%)
Check whether your pricing procedure is created from scratch then you have to maintain the Condition type R100, requirement as 55 and altcbv= 28
If you have copied from RVAA01 there is no need to maintain R100, as it is already available
Create the order
Ordered qty is split into two items
M1               30 Pcs
This will be split as
M1          27---Item cat TANregular pricing
M1          3Item cat as TANN eligible for 100% disc
How the item category is determined
Main item:
Z1OR + NORM+TAN
Sub item
Z1ORNORM Usage= Free + Higher level item cat as TAN= TANN as sub item Item category
Exclusive
VBN1
Select Exclusive
The screen fields are same as inclusive except here there is a provision to add the material number of free good material, which is different from the material ordered. If left blank system takes both as same material
Reward if useful to u

Can't able to post the Goods Receipt in MB31

I had create plant - 7177, Warehouse-I - 717 (For finished material) & Warehouse-II - 718 (For Semi finished material). While creation of finished material in MM01, i was entered the wherehouse no as 718. With this parameter, i cant able to post the goods receipt in MB31- For Finished Material. An error message appeared as "material not exit in the WH-717 in plant 7177". What is the procedure to solve this problem?

Hi,
In order header, go to goods receipt tab, check the storage location maintained. I think this storage location / plant combination is not linked to warehouse 717.
Hope this answers your query.
If helpful award points
Regards,
Vivek

Is it possible to post a good issue movement before post the good receipt

Is it possible to post a good issue movement before post the good receipt movement for the same material, into the same period?
We try to explain better, today we've done a test:
Step 1 :   We have created a material, wich material type is HAWA, with price control V, and 1 euro for 1 ST.
Step 2 :   We have post a good receipt movement, 561 of this material with 1000 ST of stock, and on posting date: 05.05.2011.
Step 3 :   Then, we have post a good issue movement, 562 of the same material, with 500 ST of stock, on posting date: 01.05.2011 ( so that, the posting date of the 562 is before from the posting date of 561).
And it has worked, so that on trx "mb51" for this material we saw:
PLANT1           STO1         562           Mat. Doc.1           01.05.2011            500- ST
PLANT1           STO1         561           Mat. Doc.2           05.05.2011           1000 ST
And with "fbl3n" for this G/L account , the same situation:
G/LAccount1            DocumentNo1            01.05.2011        99            500- EUR
G/LAccount1            DocumentNo2            05.05.2011        89            1000 EUR
We don't like this fact, someone knows how is it possible? The negative stocks aren't flagged!!!!
Edited by: Ariana Serrano Aguila on May 5, 2011 5:50 PM

SAP only checks if there is enough quantity in the period (month), it does not check if there is enough stock at date level.
there is no stock stored in any table for a given date. SAP would need to run the logic of MB5B to calculate the stock at a certain date, this would cause tremendous performance issues.
you either have to do this calculation yourself in a user exit, or you better train your users.

How to fix a value to MKPF-BKTXT when i use VL02N to post the goods ?

hello friends:
i face one problem. i want to fix a value for the MKPF-BKTXT when i use the VL02N to post the goods before the material ducument be created. if anybody please give your help to me ,thank you !

Hi,
You can set default value for MKPF-BKTXT in user exit ZXMBCU01 by passing value to field XMKPF-BKTXT.
Hope this help.
Cheers,

Need RFC which can post the Goods Receipt

Hi,
My scenario is to post the Goods receipt, by using file and after posting the Goods Receipt i want the acknowledgement whether it is successful or unsuccessful. There is an idoc MBGMCR02 which can post the Goods Receipt but application acknowledgement is not possible in file to idoc scenario, so now i am searching for a RFC so that i can handle this situation using BPM synchronous process. Kindly suggest any RFC or BAPI which can post the Goods Receipt.
Thanks & Regards,
Venkat

Hi Venkat,
As per my understanding this is a "File To (Inbound) Proxy" scenario, in which you can use the BAPI "SD_SHIPMENT_POST_GOODS_ISSUE" to do the PGI into R/3 system.
To perform this, you can go-ahead with the steps as mentioned below:
Source (XI) System:
1. Create the source & target data type in XI.
2. Do required mapping in XI.
3. In configuration directory, use the adapter type "XI" on the receiver communication channel.
Target (R/3) System:
1. Call transaction "SPROXY".
2. Create the interface class (double click on Inbound message Interface, inside your namespace in R/3).
3. Inside the class (proxy), create an internal table to keep all the records which will be coming from XI after your mapping.
4. Pass all the data to above create internal table.
5. Now, call function module "SD_SHIPMENT_POST_GOODS_ISSUE" and pass all required data from ur internal table to this FM (BAPI).
Note: Kindly read about this FM (BAPI) first in SE37 under "Function Module Documentation".
6. Do commit work after calling the FM (BAPI).
I hope this will help you to resolve all your queries.
Regards,
Sarvesh Singh

Error when posting the goods receipt

Hi we have recently successfuly updated 4.6 B to ECC 6.0.But when i am doing captive consumption by 949 Mvt. through process message system gives an error that
Error when posting the goods receipt
Message no. CB345
Diagnosis
With the selected process message, a goods receipt for the order was reported to the warehouse (destination ZPI1). However, an error occurred when the goods receipt was posted.
Please do needful.
Regards,
PP

Hi Daniel,
This is the first time i am coming across an issue like this.
neverthless from a logical front,
1. Remove Cost center as a valid receiver in Settlement Profile.
2. Your OKB9 setting are pretty much good. No need to worry about it. Becasue, OKB9 only will work if the system doesn't identify any other cost object. In this case Production Order is an automatic cost object which system should have taken.
3. Check the Settlement rule when you have created Production Order. It should have been MAT.
4. I hope you are creating Production Order with Material (using CO01 and not CO07)
5. Make sure in OPL8, the default rule in controlling tab is PP1.
Once all these are fine, i do not see any reason why you will get your probelm.
Please check and revert back to me if the problem still persists.
Best Regards
Surya

When i am posting the Outbound delivery,here getting Runtime error

Hello
         When i am posting the Outbound delivery,here getting Runtime error
This is error analysis report
Error analysis
    Short text of error message:
    No RFC destination is defined for SAP Global Trade Services
    Long text of error message:
    Technical information about the message:
    Message class....... "/SAPSLL/PLUGINR3"
    Number.............. 002
    Variable 1.......... " "
    Variable 2.......... " "
    Variable 3.......... " "
    Variable 4.......... " "
Please give me solution for this

HI,
Probable some missing customising for SAP Global Trade Services - Plug-In.
Check with your functional consultant if the configuration is correct.
Check in SPRO.
Sales and Distribution>Foreign Trade/Customs>SAP Global Trade Services - Plug-In
Regards,
Ankur Parab

Is it possible to post a good issue movement before post the good receipt m

Is it possible to post a good issue movement before post the good receipt movement for the same material, into the same period?
We try to explain better, today we've done a test:
Step 1 :   We have created a material, wich material type is HAWA, with price control V, and 1 euro for 1 ST.
Step 2 :   We have post a good receipt movement, 561 of this material with 1000 ST of stock, and on posting date: 05.05.2011.
Step 3 :   Then, we have post a good issue movement, 562 of the same material, with 500 ST of stock, on posting date: 01.05.2011 ( so that, the posting date of the 562 is before from the posting date of 561).
And it has worked, so that on trx "mb51" for this material we saw:
PLANT1-----STO1---- 562----- Mat. Doc.101.05.2011--
500-   ST
PLANT1-----STO1---561Mat. Doc.205.05.2011--
1000 ST
And with "fbl3n" for this G/L account , the same situation:
G/LAccount1--DocumentNo101.05.2011--99--
500- EUR
G/LAccount1--DocumentNo205.05.2011--89--
1000 EUR
We don't like this fact, someone knows how is it possible? The negative stocks aren't flagged!!!!
Edited by: Ariana Serrano Aguila on May 5, 2011 5:50 PM

Hi,
Though sap allows like this ,, the document created will be with the date of the actual posting system date. If you look into the MSEG table you will get to know this.
In theory .. this kind of practice should not be allowed .
since this is a 562 which is a individual entry may be system would have allowed.you try a 102 .
Regards,

Posting the goods

Hi,
when iam posting the goods iam getting the following error.
Account 160000 for trans./event key WRX is a K control account
The account automatically determined by the system in this case is a control account, which is not relevant to this goods movement.
How to resolve this.
Thanks.

Hi,
GL A/c 160000 is a Reconciliation A/c for Vendor, which is to be assigned in Vendor Master.
Check in FS00 for GL A/c 160000 > Control Data > Recon. account for acct type "K" ie. Vendors
Create a new GL A/c for GR/IR Clearing and assign to WRX in OBYC, it should not have anything in "Recon. account for acct type" field.

MB1C - Sloc 0001, Mov type 561 (not able to post the goods)

When I post inventory for ROH material
using movement type 561 (Tcode:MB1C) with
SLOC 0001, the system errors outs with the following message
"Material XXXX doesnot exist in warehouse 001"
Iam not maintaining warehouse management for ROH materials.
But I am able to post for the same material with Sloc 0002
Its the issue with sloc 0001
System posts the following Message:
Material XXXX does not exist in warehouse 001
    Message no. L9023
Diagnosis
    All the materials that you use within a warehouse number must also be
    defined for this warehouse number. The material you are using is not
    defined.
Procedure
    If you want to use the material within your warehouse number, you must
    create the material in the material segment for that warehouse number.
Is there any workaround, where I need not maintain WHSE management view for ROH
materials but still able to post the goods with Sloc 0001

Csaba/Rajesha:
Thank you for your replies
For the Sloc 0001, like mentioned it is assigned to whse number 001
I tried to remove/delete the whse number 001 for the sloc0001, but its a entry required
field
In order to fullfill the requirement, maintained the same whse number(HMM) that is
being maintained for sloc 0002 {for which I was able to post (Mvt type 561, Tcode MB1C)}
In MB1C Mtype 561 posted with sloc 0001, Now the system posts
"Material XXXX doesnot exist in warehouse HMM" (previously it gave "Material XXXX doesnot exist in warehouse 001")
It does not give the message for Sloc 0002
Any way in this process, I learned some new things
Due points have been assigned

While user is posting the goods delivery. He was getting error "Field selec

Similar Messages

Maybe you are looking for