While using FM 'HR_FORMS_TIM_GET_B2_RESULTS' some emps FT_ZES remains blank

Dear Sir,
For calculating overtime we have use 'HR_FORMS_TIM_GET_B2_RESULTS' function module. But for some employees,it is not fetching values in FT_ZES. Please help me if any changes to be done in master data of those employees.
Thanks.

Hi,
I would suggest please ask Functional to check ZES table using PT66, does data is stored in ZES.
As structure has ZES, it should be store based on time type config.
Thanks,
Ketul

Similar Messages

Some email images do not show while using the icloud web app. I can see the images on my IOS devices and in gmail but I only see a small gray box in the icloud web mail app. Load HTML images is checked in preferences.

Some email images do not show while using the icloud web app. I can see the images on my IOS devices and in gmail but I only see a small gray box in the icloud web mail app. Load HTML images is checked in preferences. Is there a solution to this issue?

I've seen the opposite issue. My wife recieved an email with jpg attachments. She couldn't see or print them on her iPhone 4S but they showed up fine in iCloud or in the mail app. I had her forward the email to herself and then they showed up. I assume there is an issue with how Apple is processing the attachments and resending causes them to get reformatted in a way that makes them easier to handle.
So yeah. Seems like some bugs. Hope Apple fixes them soon.

After using "migration assistant" from my old iMac to my new iMac, some tools stick while using Photoshop CS 6 Extended. My current operation system is 10.10 Yosemite. I was wondering if UN installing then RE installing CS 6 might solve the problem. If th

After using "migration assistant" from my old iMac to my new iMac, some tools stick while using Photoshop CS 6 Extended. My current operation system is 10.10 Yosemite. I was wondering if UN installing then RE installing CS 6 might solve the problem. If this is recommended, I would need complete instructions on doing this. I have there serial number for the product.

using migration assistant is problematic.
at this point yes, you should uninstall everything migrated, clean and then reinstall properly using the installation files.
cleaner: Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6
installation files:
Downloads available:
Suites and Programs: CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4 | CS3
Acrobat: XI, X | 9,8 | 9 standard
Premiere Elements: 13 |12 | 11, 10 | 9, 8, 7
Photoshop Elements: 13 |12 | 11, 10 | 9,8,7
Lightroom: 5.7| 5 | 4 | 3
Captivate: 8 | 7 | 6 | 5
Contribute: CS5 | CS4, CS3
Download and installation help for Adobe links
Download and installation help for Prodesigntools links are listed on most linked pages. They are critical; especially steps 1, 2 and 3. If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.
window using the Lightroom 3 link to see those 'Important Instructions'.

While using oracle forms 6i and database 11g in windows 7, the application getting closed while working on some forms

Hi,
Please advise on the below issue.
While using oracle forms 6i and database 11g in windows 7, the application getting closed while working on some forms.
May i know what is to be done?

MoNo wrote:
Hi Friends...
I'm using windows7 32 bit.
<snip>First, please be aware that oracle products are NOT certified to run on ANY 'home' edition of ANY version of Windows.
Second, did you read the instructions on the page where you downloaded the software -- specifically the part about unzipping TWO downloaded zip files into the SAME directory?
Third, did you read and heed the installation guide, or did you just go straight to 'setup.exe'?

Ipod touch 4 gets hot while using some apps like angry birds?

Is it normal for the upper back of the ipod touch 4 to get hot while using some apps like angry birds? Is this a potential battery problem? It doesnt get hot while charging or playing songs... Just when using some game apps. I assume that it has something to do with battery drain, should I be concerned?

When the iPod is used heavily like for games it is norma for the iPod to get warm. Unless you hav short battery life I would not be concerned.

I was using ios 7.0.3 nd it was working very nice but before some days i got an update 7.0.4 nd i updated and now my iphone is getting switch off while using nd restarts..???? what to do

i was using ios 7.0.3 nd it was working very nice but before some days i got an update 7.0.4 nd i updated and now my iphone is getting switch off while using nd restarts..???? what to do

Sorry you cannot go back to previous version once your are updated to the latest iOS version.
Apple prevents downgrading your phone.

F.E.A.R. 2 black screen while using Soundblaster X-Fi

This is my second attempt to get some support for a problem that is plaguing many trying to play F.E.A.R 2 with a Soundblaster X-Fi. We have been on the official forums for WBGames now for the past two weeks asking for help. Many were able to find solutions by updating their codecs however there are many of us that still cannot get into the game. WBGames official response it as follows...
Dear, xxx
Regarding your sound acceleration error and the sound cards you have used, we apologize for the inconvenience you have experienced.
At the moment, we have been noticed that certain Creative sound cards (X-Fi, Sound Blaster and Audigy) and Realtek are presenting incompatibility issues with the F.E.A.R. 2 application. Unfortunately, Creative Labs have not yet released a patch to solve this situation, as other companies like Nvidia have worked on.
F.E.A.R. 2 is designed to function with Windows XP/Vista compatible graphics and sound cards. Drivers for these devices are provided by Windows itself or the respecti've card manufacturers and may occasionally result in incompatibility problems beyond our control.
If there is anything else we can do to assist you, please do not hesitate to contact us by email at [url=mailto:[email protected]">[email protected] m[/url] or by phone 080-0664-9456 (in Germany) during the hours of EST :00 pm - 0:00 pm, PST: 0am- 8pm MON-FRI.
Thank you for contacting Warner Brothers and have a great day.
Refund option
If you are not satisfied with the performance of this product on your PC, you may return it with the receipt of purchase to the store from which it was purchased within 90 days from the original purchase date for a refund.
If you purchased this product as an electronic download, please visit the following site for refund details:
[url="https://support.steampowered.com/kb_article.php?ref=4938-WTDF-9465">https://support.steampowered.com/kb_...4938-WTDF-9465[/url]
I thought that someone with creative labs would be interested in either responding or releasing some kind of a statement in regards to this.
The current problem for us is when we try to launch the game a small animated orb runs at the bottom right of the screen while the game loads. At the end of the animation we hear a small chime and the screen goes black as though it is about to load the intro videos. But we get nothing. The screen remains black. I have exhausted all of their solutions, I have updated drivers and tried the latest beta drivers from Creative. I have removed, replaced, and updated codecs. Video card drivers are updated, etc.
Basically we are faced with the following dilema. We can disable the sound card in Windows and the game plays however with no sound. We can run the game in safe mode which manually disables the sound card and the game plays but with no sound. Leave the sound card enabled and run the game in normal mode and we get a black screen.
PLEASE, can someone with Creative Labs respond to this? We are looking for answers and would very much like to play this game.Message Edited by djdouglas on 02-20-2009 09:39 [email protected]

Re: F.E.A.R. 2 black screen while using Soundblaster X-Fi?
solace wrote:
Pardon me but i'm looking your Quad SLI setup a potential culprit to your problems. Have you tried disabling SLI mode to see if the problem can be resolved?
That was my first thought when I encountered this problem. I took the steps troubleshooting video. Disabled SLI, Physically removed one video card. Updated drivers, etc. I am currently running the 82.06WHQL drivers which are suppose to be enhanced for F.E.A.R.2 and other games.
My next step was to try uninstalling codecs as their support team had suggested for people running into issues with the demo version (which btw worked perfectly for me). There were tons of reponses by the devs and community managers before the release of the game in response to people having issues (these same issues) on the demo. So they released a patch the day before the release of the game and when everyone installed the game the patch automatically installed. So for me and many others that enjoyed a smooth gameplay in the demo our rigs are now not working with the official release.
Since release we have yet to see a response or fix or suggestion from a dev. There have been many others in the community that have helped each other out by posting their solutions. For most updating their codecs using Klite or Ace Mega codec pack has fixed their problem but for a select few of us these solutions have not worked.
Basically I can launch the game successfully in safemode which disables sound. I can also disable the sound card and launch the game successfully although without sound. The codec that has seemed to be effecti've when replaced by others is the Microsoft IMA ADHCP codec. However for me I can disable that codec and get a hardware accelration error but still get a black screen. Re enable it and get black screen with no error. So I do not believe this to be the issue plaguing me. Ultimately it is coming down to a conflict with my sound board and the game.

BSOD while using safari

My new ipad mini wifi with retina, 16GB reboots itself with a blue screen while using Safari. Can the bug be fixed?

Hi, Venkche.
Thank you for visiting Apple Support Communities.
Here are a couple resources that have some helpful troubleshooting steps for this issue. These are labeled for the iPhone, but the steps will also apply for the iPad.
Resolution
If a single application is not responding or stops responding when it opens, you can force it to close.
If the device is unresponsive or if certain controls aren't working as expected, restart your device.
If the device remains unresponsive or does not turn on (or power on), reset your device.
If there is no video or if the screen remains black, verify that the device has enough charge to turn on:
If you are using an iPad, ensure that it's connected to the USB Power Adapter supplied with the device.
Let it charge for at least twenty minutes, then see if it starts normally.
If there is no image on the screen, press the Sleep/Wake button to attempt to wake the device.
If the screen displays a red battery icon, continue charging the device until the battery is fully charged. Learn more about charging iPhone and iPod touch, or iPad.
If the above steps do not resolve the issue, or the if the screen remains black or shows a persistent Apple logo, try restoring with iTunes:
Connect the device to your computer and open iTunes.
If the device appears in iTunes, select and click Restore on the Summary pane. Learn more aboutrestoring iOS software.
If the device doesn't appear in iTunes, try to force the device into recovery mode, and then restore it.
If the above steps do not resolve the issue, contact Apple.
iOS: Not responding or does not turn on
http://support.apple.com/kb/ts3281
Will not turn on, will not turn on unless connected to power, or unexpected power off
Verify that the Sleep/Wake button functions. If it does not function, inspect it for signs of damage. If the button is damaged or is not functioning when pressed, seek service.
Check if a Liquid Contact Indicator (LCI) is activated or there are signs of corrosion. Learn about LCIsand corrosion.
Connect the iPhone to the iPhone's USB power adapter and let it charge for at least ten minutes.
After at least 30 minutes, if:
The home screen appears: The iPhone should be working. Update to the latest version of iOS if necessary. Continue charging it until it is completely charged and you see this battery icon in the upper-right corner of the screen . Then unplug the phone from power. If it immediately turns off, seek service.
The low-battery image appears, even after the phone has charged for at least 20 minutes: See "iPhone displays the low-battery image and is unresponsive" symptom in this article.
Something other than the Home screen or Low Battery image appears, continue with this article for further troubleshooting steps.
If the iPhone did not turn on, reset it while connected to the iPhone USB power adapter.
If the display turns on, go to step 4.
If the display remains black, go to next step.
Connect the iPhone to a computer and open iTunes. If iTunes recognizes the iPhone and indicates that it is in recovery mode, attempt to restore the iPhone. If the iPhone doesn't appear in iTunes or if you have difficulties in restoring the iPhone, see this article for further assistance.
If restoring the iPhone resolved the issue, go to step 4. If restoring the iPhone did not solve the issue, seek service.
iPhone: Hardware troubleshooting
http://support.apple.com/kb/ts2802
Cheers,
Jason H.

ORA-00902: invalid datatype comile error while using CAST function

Hi everyone,
I'm getting ORA-00902: invalid datatype compilation error while using CAST function.
open ref_cursor_list for select empName from TABLE(CAST(part_t AS partnumberlist));
The partnumberlist and ref_cursor_list is declared in the Package spec as given below.
TYPE ref_cursor_list IS REF CURSOR;
TYPE partnumberlist IS TABLE OF emp.empName%TYPE;
The error points the partnumberlist as invalid datatype in TOAD because of this i'm unable to compile the package.
Any suggestion
Thanks and regards
Sathish Gopal

Here is my code for
package Spec
CREATE OR REPLACE PACKAGE "HISTORICAL_COMMENTZ" AS
TYPE prior_part_data_record IS RECORD (
prior_part_row_id PGM_RPLCMNT_PART.PR_PART_ROW_S_ID%TYPE,
prior_pgm_chng_s_id PGM_RPLCMNT_PART.PR_PGM_CHNG_S_ID%TYPE
TYPE parts_list IS TABLE OF prior_part_data_record;
--TYPE parts_list IS TABLE OF NUMBER;
TYPE partnumberlist IS TABLE OF PGM_RPLCMNT_PART.PR_PART_ROW_S_ID%TYPE;
TYPE partnumber_cursor IS REF CURSOR;
TYPE comment_record IS RECORD (
pgm_s_id                     PGM_PART_CMNT.PGM_S_ID%TYPE,
part_row_s_id                PGM_PART_CMNT.PART_ROW_S_ID%TYPE,
pgm_chng_s_id                PGM_PART_CMNT.PGM_CHNG_S_ID%TYPE,
cmnt_txt                     PGM_PART_CMNT.CMNT_TXT%TYPE,
cmnt_dt                     PGM_PART_CMNT.CMNT_DT%TYPE,
updt_rsrc_id                PGM_PART_CMNT.UPDT_RSRC_ID%TYPE
TYPE comment_list IS TABLE OF comment_record;
global_pgm_s_id INTEGER := 0;
global_part_row_s_id INTEGER := 0;
err_num NUMBER := 999999;
err_msg VARCHAR2 (250);
PROCEDURE getComments (
pgm_s_id IN NUMBER,
part_row_s_id IN NUMBER,
partnumber_cursorlist out partnumber_cursor);
END;
Package Body
CREATE OR REPLACE PACKAGE BODY HISTORICAL_COMMENTZ
AS
FUNCTION getPriorPart
(param_prior_pgm_chng_s_id IN PGM_RPLCMNT_PART.PR_PGM_CHNG_S_ID%TYPE,
return_prior_part_data_record IN OUT prior_part_data_record
RETURN INTEGER
IS
retVal INTEGER;
prior_part_row_id INTEGER;
prior_pgm_chng_s_id INTEGER;
local_prior_part_data_record prior_part_data_record;
BEGIN
SELECT PR_PART_ROW_S_ID AS prior_part_row_id, PR_PGM_CHNG_S_ID AS prior_pgm_chng_s_id
INTO local_prior_part_data_record
--SELECT PR_PART_ROW_S_ID INTO retVal
FROM PGM_RPLCMNT_PART
WHERE PGM_S_ID = global_pgm_s_id AND CUR_PGM_CHNG_S_ID = param_prior_pgm_chng_s_id;
return_prior_part_data_record := local_prior_part_data_record;
retVal := 0;
RETURN retVal;
EXCEPTION
WHEN NO_DATA_FOUND
THEN
err_num := SQLCODE;
err_msg := 'SQL Error ' || SUBSTR (SQLERRM, 1, 250);
DBMS_OUTPUT.put_line ('SQLERROR = ' || err_msg);
retVal := -1;
RETURN retVal;
WHEN OTHERS
THEN
err_num := SQLCODE;
err_msg := 'SQL Error ' || SUBSTR (SQLERRM, 1, 250);
DBMS_OUTPUT.put_line ('SQLERROR = ' || err_msg);
retVal := -1;
RETURN retVal;
END getPriorPart;
FUNCTION getComment (found_parts_list IN parts_list, comments OUT comment_list)
RETURN INTEGER
IS
CURSOR init_cursor
IS
SELECT PGM_S_ID,PART_ROW_S_ID,PGM_CHNG_S_ID,CMNT_TXT,CMNT_DT,UPDT_RSRC_ID
FROM PGM_PART_CMNT WHERE 1 = 2;
retVal INTEGER;
indexNum PLS_INTEGER;
local_part_record prior_part_data_record;
local_comment_record comment_record;
local_part_row_s_id NUMBER;
i PLS_INTEGER;
BEGIN
OPEN init_cursor;
FETCH init_cursor
BULK COLLECT INTO comments;
i := 0;
indexNum := found_parts_list.FIRST;
WHILE indexNum IS NOT NULL
LOOP
local_part_record := found_parts_list(indexnum);
local_part_row_s_id := local_part_record.prior_part_row_id;
SELECT PGM_S_ID,PART_ROW_S_ID,PGM_CHNG_S_ID,CMNT_TXT,CMNT_DT,UPDT_RSRC_ID
INTO local_comment_record FROM PGM_PART_CMNT
WHERE PGM_S_ID = global_pgm_s_id
AND PART_ROW_S_ID = local_part_row_s_id;
comments(i) := local_comment_record;
i := i + 1;
END LOOP;
RETURN retval;
EXCEPTION
WHEN NO_DATA_FOUND
THEN
err_num := SQLCODE;
err_msg := 'SQL Error ' || SUBSTR (SQLERRM, 1, 250);
DBMS_OUTPUT.put_line ('SQLERROR = ' || err_msg);
RETURN retval;
WHEN OTHERS
THEN
err_num := SQLCODE;
err_msg := 'SQL Error ' || SUBSTR (SQLERRM, 1, 250);
DBMS_OUTPUT.put_line ('SQLERROR = ' || err_msg);
RETURN retval;
END getComment;
PROCEDURE getComments
pgm_s_id IN NUMBER,
part_row_s_id IN NUMBER,
partnumber_cursorlist OUT partnumber_cursor)
IS
comment_recordlist comment_record;
retPartnumberlist partnumberlist;
found_parts_list parts_list;
local_part_record prior_part_data_record;
is_more_parts BOOLEAN;
driver_chng_s_id NUMBER;
num_parts NUMBER;
retVal NUMBER;
comments comment_list;
returnPartnumberlist partnumberlist;
iloopCounter PLS_INTEGER;
inx1 PLS_INTEGER;
part_t partnumberlist :=partnumberlist(100,200,300);
CURSOR part_list_init_cursor
IS
SELECT PR_PART_ROW_S_ID,PR_PGM_CHNG_S_ID FROM PGM_RPLCMNT_PART WHERE 1 = 2;
CURSOR inIt_cursor
IS
SELECT 0 FROM DUAL WHERE 1 = 2;
BEGIN
DBMS_OUTPUT.ENABLE (5000000);
global_pgm_s_id := pgm_s_id;
global_part_row_s_id := part_row_s_id;
SELECT PART_ROW_S_ID AS prior_part_row_id, PR_PGM_CHNG_S_ID AS prior_pgm_chng_s_id
INTO local_part_record
FROM PGM_RPLCMNT_PART
WHERE PGM_S_ID = global_pgm_s_id AND PART_ROW_S_ID = global_part_row_s_id AND
CUR_PGM_CHNG_S_ID IN (SELECT MAX(CUR_PGM_CHNG_S_ID) FROM PGM_RPLCMNT_PART WHERE
PGM_S_ID = global_pgm_s_id AND PART_ROW_S_ID = global_part_row_s_id
GROUP BY PART_ROW_S_ID);
OPEN part_list_init_cursor;
FETCH part_list_init_cursor
BULK COLLECT INTO found_parts_list;
-- Add the existing part to the found list
found_parts_list.EXTEND;
found_parts_list(1) := local_part_record;
driver_chng_s_id := local_part_record.prior_pgm_chng_s_id;
num_parts := 1;
is_more_parts := TRUE;
WHILE (is_more_parts) LOOP
retVal := getPriorPart(driver_chng_s_id,local_part_record);
IF (retVal != -1) THEN
found_parts_list.EXTEND;
num_parts := num_parts + 1;
found_parts_list(num_parts) := local_part_record;
driver_chng_s_id := local_part_record.prior_pgm_chng_s_id;
ELSE
is_more_parts := FALSE;
END IF;
END LOOP;
--num_parts := getComment(found_parts_list,comments);
OPEN init_cursor;
FETCH init_cursor
BULK COLLECT INTO returnPartnumberlist;
num_parts := found_parts_list.COUNT;
FOR iloopCounter IN 1 .. num_parts
LOOP
returnPartnumberlist.EXTEND;
returnPartnumberlist(iloopCounter) := found_parts_list(iloopCounter).prior_part_row_id;
END LOOP;
retPartnumberlist := returnPartnumberlist;
open
*          partnumber_cursorlist for select PR_PART_ROW_S_ID from TABLE(CAST(retPartnumberlist AS historical_commentz.partnumberlist));*
DBMS_OUTPUT.put_line('Done....!');
EXCEPTION
some code..............................
END getComments;
END HISTORICAL_COMMENTZ;
/

Upgraded to IOS 8. iMessage has changed for the worse, losing messages now. How can I force iMessage to use SMS for some contacts?

SMS works well and is generally free for most plans here. I'd like to be able to send messages via SMS from my iPhone for many of these contacts because something changed in IOS 8 iMessage and now iMessages seem to get lost. Plus as before they can end up in multiple threads. This latter issue seems to be worse as well with iOS8 but not sure why.
For example one friend set up an iPad with her apple ID and subsequently gave it to her son. She also has an iPhone. I've been exchanging iMessage/SMS's with her which worked fine until the upgrade. Then she stopped getting my messages on her iPhone. Turns out that they were landing on the iPad. While it may be that she doesn't have things sorted correctly on her iPhone that doesn't change the fact that prior to iOS8 she could get my messages. So I'd like to designate her and a number of other contacts as SMS only.
Additionally I am seeing more multiple threads from the same contacts. Not sure why but it seems to have something to do with iOS 8 sucking in additional email addresses, e.g. @icloud.com and subsequently using these in some messages even though the contact is the same person. I've tried adding the new email address into the contact card I have on file for that person and this simply resulted in two threads with the same contact name.
Really what is up with this and why does Messages need to keep track of all this info? The only requirement to direct a message between to iDevices should be valid Apple ID's on both with a means to reference this (Phone Number, Apple ID Email Address) in the respective contact. In the absence of this the message should be sent as SMS.

I have the same problem on iOS 7.0.3. With one particular friend I receive iMessages from her just fine and I can send her iMessages from Mac OS X and Messages on iPad, but Messages on my iPhone keep sending her my messages as Text messages. I send iMessages just fine from the same iPhone. SFChuch, what ios version is your recipient using? Did they sign up on iCloud? I wonder if the problem happens with recipients who are not properly registered on iCloud or some special case like that.

Error while using P2V in Oracle VM 2.2 version

Error while using P2V in Oracle VM 2.2 version
I tried using this option by using the steps given on one link but it didnt worked...
Error:
code 404, message No permission to list directory.
I ve tried giving full permissions on for /OVS on Server but invain.
Can U pls help me...
Thanks in advance.
Edited by: user10310678 on Sep 16, 2009 3:32 AM

user10310678 wrote:
I am using beta version. Oracle VM Manager 2.2.0If you have a beta version of 2.2, then you should be an Oracle employee. Please ask this question on an internal mailing list. If you are not an Oracle employee, please ask the employee that gave you this beta. As this is a beta, some functionality may not be operational yet, so I can't answer why this particular feature seems not to work.

OSB: Cannot acquire data source error while using JCA DBAdapter in OSB

Hi All,
I've entered 'Cannot acquire data source' error while using JCA DBAdapter in OSB.
Error infor are as follows:
The invocation resulted in an error: Invoke JCA outbound service failed with application error, exception: com.bea.wli.sb.transports.jca.JCATransportException: oracle.tip.adapter.sa.api.JCABindingException: oracle.tip.adapter.sa.impl.fw.ext.org.collaxa.thirdparty.apache.wsif.WSIFException: servicebus:/WSDL/DBAdapter1/RetrievePersonService [ RetrievePersonService_ptt::RetrievePersonServiceSelect(RetrievePersonServiceSelect_inputParameters,PersonTCollection) ] - WSIF JCA Execute of operation 'RetrievePersonServiceSelect' failed due to: Could not create/access the TopLink Session.
This session is used to connect to the datastore.
Caused by Exception [EclipseLink-7060] (Eclipse Persistence Services - 2.0.2.v20100323-r6872): org.eclipse.persistence.exceptions.ValidationException
Exception Description: Cannot acquire data source [jdbc/soademoDatabase].
Internal Exception: javax.naming.NameNotFoundException: Unable to resolve 'jdbc.soademoDatabase'. Resolved 'jdbc'; remaining name 'soademoDatabase'.
; nested exception is:
BINDING.JCA-11622
Could not create/access the TopLink Session.
This session is used to connect to the datastore.
JNDI Name for the Database pool: eis/DB/soademoDatabase
JNDI Name for the Data source: jdbc/soademoDatabase
I created a basic DBAdapter in JDeveloper, got the xsd file, wsdl file, .jca file and the topLink mapping file imported them into OSB project.
Then I used the .jca file to generate a business service, and tested, then the error occurs as described above.
Login info in RetrievePersonService-or-mappings.xml
<login xsi:type="database-login">
<platform-class>org.eclipse.persistence.platform.database.oracle.Oracle9Platform</platform-class>
<user-name></user-name>
<connection-url></connection-url>
</login>
jca file content are as follows:
<adapter-config name="RetrievePersonService" adapter="Database Adapter" wsdlLocation="RetrievePersonService.wsdl" xmlns="http://platform.integration.oracle/blocks/adapter/fw/metadata">
<connection-factory location="eis/DB/soademoDatabase" UIConnectionName="Connection1" adapterRef=""/>
<endpoint-interaction portType="RetrievePersonService_ptt" operation="RetrievePersonServiceSelect">
<interaction-spec className="oracle.tip.adapter.db.DBReadInteractionSpec">
<property name="DescriptorName" value="RetrievePersonService.PersonT"/>
<property name="QueryName" value="RetrievePersonServiceSelect"/>
<property name="MappingsMetaDataURL" value="RetrievePersonService-or-mappings.xml"/>
<property name="ReturnSingleResultSet" value="false"/>
<property name="GetActiveUnitOfWork" value="false"/>
</interaction-spec>
</endpoint-interaction>
</adapter-config>
RetrievePersonService_db.wsdl are as follows:
<?xml version="1.0" encoding="UTF-8"?>
<WL5G3N0:definitions name="RetrievePersonService-concrete" targetNamespace="http://xmlns.oracle.com/pcbpel/adapter/db/KnowledeMgmtSOAApplication/AdapterJDevProject/RetrievePersonService" xmlns:WL5G3N0="http://schemas.xmlsoap.org/wsdl/" xmlns:WL5G3N1="http://xmlns.oracle.com/pcbpel/adapter/db/KnowledeMgmtSOAApplication/AdapterJDevProject/RetrievePersonService" xmlns:WL5G3N2="http://schemas.xmlsoap.org/wsdl/soap/">
<WL5G3N0:import location="RetrievePersonService.wsdl" namespace="http://xmlns.oracle.com/pcbpel/adapter/db/KnowledeMgmtSOAApplication/AdapterJDevProject/RetrievePersonService"/>
<WL5G3N0:binding name="RetrievePersonService_ptt-binding" type="WL5G3N1:RetrievePersonService_ptt">
<WL5G3N2:binding style="document" transport="http://www.bea.com/transport/2007/05/jca"/>
<WL5G3N0:operation name="RetrievePersonServiceSelect">
<WL5G3N2:operation soapAction="RetrievePersonServiceSelect"/>
<WL5G3N0:input>
<WL5G3N2:body use="literal"/>
</WL5G3N0:input>
<WL5G3N0:output>
<WL5G3N2:body use="literal"/>
</WL5G3N0:output>
</WL5G3N0:operation>
</WL5G3N0:binding>
<WL5G3N0:service name="RetrievePersonService_ptt-bindingQSService">
<WL5G3N0:port binding="WL5G3N1:RetrievePersonService_ptt-binding" name="RetrievePersonService_ptt-bindingQSPort">
<WL5G3N2:address location="jca://eis/DB/soademoDatabase"/>
</WL5G3N0:port>
</WL5G3N0:service>
</WL5G3N0:definitions>
Any suggestion is appricated .
Thanks in advance!
Edited by: user11262117 on Jan 26, 2011 5:28 PM

Hi Anuj,
Thanks for your reply!
I found that the data source is registered on server soa_server1 as follows:
Binding Name: jdbc.soademoDatabase
Class: weblogic.jdbc.common.internal.RmiDataSource_1033_WLStub
Hash Code: 80328036
toString Results: ClusterableRemoteRef(8348400613458600489S:10.2.1.143:[8001,8001,-1,-1,-1,-1,-1]:base_domain:soa_server1 [8348400613458600489S:10.2.1.143:[8001,8001,-1,-1,-1,-1,-1]:base_domain:soa_server1/291])/291
Binding Name: jdbc.SOADataSource
Class: weblogic.jdbc.common.internal.RmiDataSource_1033_WLStub
Hash Code: 92966755
toString Results: ClusterableRemoteRef(8348400613458600489S:10.2.1.143:[8001,8001,-1,-1,-1,-1,-1]:base_domain:soa_server1 [8348400613458600489S:10.2.1.143:[8001,8001,-1,-1,-1,-1,-1]:base_domain:soa_server1/285])/285
I don't know how to determine which server the DBAdapter is targetted to.
But I found the following information:
Under Deoloyment->DBAdapter->Monitoring->Outbound Connection Pools
Outbound Connection Pool Server State Current Connections Created Connections
eis/DB/SOADemo AdminServer Running 1 1
eis/DB/SOADemo soa_server1 Running 1 1
eis/DB/soademoDatabase AdminServer Running 1 1
eis/DB/soademoDatabase soa_server1 Running 1 1
The DbAdapter is related to the following files:
C:\ Oracle\ Middleware\ home_11gR1\ Oracle_SOA1\ soa\ connectors\ DbAdapter. rar
C:\ Oracle\ Middleware\ home_11gR1\ Oracle_SOA1\ soa\ DBPlan\ Plan. xml
I unzipped DbAdapter.rar, opened weblogic-ra.xml and found that there's only one data source is registered:
<?xml version="1.0"?>
<weblogic-connector xmlns="http://www.bea.com/ns/weblogic/90">
<enable-global-access-to-classes>true</enable-global-access-to-classes>
<outbound-resource-adapter>
<default-connection-properties>
<pool-params>
<initial-capacity>1</initial-capacity>
<max-capacity>1000</max-capacity>
</pool-params>
<properties>
<property>
<name>usesNativeSequencing</name>
<value>true</value>
</property>
<property>
<name>sequencePreallocationSize</name>
<value>50</value>
</property>
<property>
<name>defaultNChar</name>
<value>false</value>
</property>
<property>
<name>usesBatchWriting</name>
<value>true</value>
</property>
<property>
<name>usesSkipLocking</name>
<value>true</value>
</property>
</properties>
          </default-connection-properties>
<connection-definition-group>
<connection-factory-interface>javax.resource.cci.ConnectionFactory</connection-factory-interface>
<connection-instance>
<jndi-name>eis/DB/SOADemo</jndi-name>
          <connection-properties>
               <properties>
               <property>
               <name>xADataSourceName</name>
               <value>jdbc/SOADataSource</value>
               </property>
               <property>
               <name>dataSourceName</name>
               <value></value>
               </property>
               <property>
               <name>platformClassName</name>
               <value>org.eclipse.persistence.platform.database.Oracle10Platform</value>
               </property>
               </properties>
          </connection-properties>
</connection-instance>
</connection-definition-group>
</outbound-resource-adapter>
</weblogic-connector>
Then I decided to use eis/DB/SOADemo for testing.
For JDeveloper project, after I deployed to weblogic server, it works fine.
But for OSB project referencing wsdl, jca and mapping file from JDeveloper project, still got the same error as follows:
BEA-380001: Invoke JCA outbound service failed with application error, exception:
com.bea.wli.sb.transports.jca.JCATransportException: oracle.tip.adapter.sa.api.JCABindingException: oracle.tip.adapter.sa.impl.fw.ext.org.collaxa.thirdparty.apache.wsif.WSIFException: servicebus:/WSDL/DBAdapterTest/DBReader [ DBReader_ptt::DBReaderSelect(DBReaderSelect_inputParameters,PersonTCollection) ] - WSIF JCA Execute of operation 'DBReaderSelect' failed due to: Could not create/access the TopLink Session.
This session is used to connect to the datastore.
Caused by Exception [EclipseLink-7060] (Eclipse Persistence Services - 2.0.2.v20100323-r6872): org.eclipse.persistence.exceptions.ValidationException
Exception Description: Cannot acquire data source [jdbc/SOADataSource].
Internal Exception: javax.naming.NameNotFoundException: Unable to resolve 'jdbc.SOADataSource'. Resolved 'jdbc'; remaining name 'SOADataSource'.
; nested exception is:
BINDING.JCA-11622
Could not create/access the TopLink Session.
This session is used to connect to the datastore.
Caused by Exception [EclipseLink-7060] (Eclipse Persistence Services - 2.0.2.v20100323-r6872): org.eclipse.persistence.exceptions.ValidationException
Exception Description: Cannot acquire data source [jdbc/SOADataSource].
Internal Exception: javax.naming.NameNotFoundException: Unable to resolve 'jdbc.SOADataSource'. Resolved 'jdbc'; remaining name 'SOADataSource'.
You may need to configure the connection settings in the deployment descriptor (i.e. DbAdapter.rar#META-INF/weblogic-ra.xml) and restart the server. This exception is considered not retriable, likely due to a modelling mistake.
It almost drive me crazy!!:-(
What's the purpose of 'weblogic-ra.xml' under the folder of 'C:\Oracle\Middleware\home_11gR1\Oracle_OSB1\lib\external\adapters\META-INF'?
---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

Confused about wheather to use session or some other technology

i have two jsp pages one is index.jsp and other one is display.jsp,from index.jsp i am passing a string value and collecting it in display.jsp ,after collecting it i am making use of that value in a sql query to display the result from the data base,and i am getting one line (row) of display ,when i repeat the process again that row is over written which i do not want , what i want is as long as i keep sending strings from index.jsp tp disply.jsp the number of rows should be added (as a display in display.jsp)
and i wanted to do that in jsp environment only as i am not aware of struts and some other technology.some sample code of display.jsp is as follows
String INDENT_NUMBER = request.getParameter("indent_number");
query1="select some data from some tables where a.INDENT_NUMBER = '"+INDENT_NUMBER+"'";
while(rs.next){
get some values here to display
like
String item_name =rs1.getString("item_name");
String INDENT_QUANTITY=rs1.getString("INDENT_QUANTITY");
here i want to display row wise data
and now close the while loop
please get me the idea if possible with sample code,i'll be greatfull to u,
thanx

I would add the String you get from the DB to an ArrayList, and store that ArrayList in the session. Then, at time of display, just iterate over the List. I would also look into putting the SQL into a JavaBean that does the work. Take as much of that code out of the JSP as possible.

How to trigger New page while using ALV with classes/oops?

Hi All
I am trying to print a report which has to show the data in two pages.
I am using ALV with classes/oops.
Though I am able to print the report but a new page is not coming. Whole of the data is coming in one single page.
Please tell me as to how to trigger a NEW PAGE while using ALV with classes/oops.
Please send some code samples also if available.
Thanks in advance.
Jerry

using sort option you can do it. in case of grid/oo alv class ALV you can view that only in print mode/preview mode.
in case of list you can view that directly.
sort-fieldname = 'FIELDNAME'.
sort-group = '*' "triggers new page
sort-up = 'X'.
append sort to it_sort.

When I download something from the Web, the "Downloads" window opens, but the window remains blank. Before it used to at least show the name of the file and I could open the file from the "Downloads" window. Is there a way to get this functionality back?

I'm running Windows XP which is updated to latest version (which I think might be Service Pack 3, but not positive.) Mozilla Firefox is version 5.0. I tend to use Google as my search engine so most of the stuff I download comes through sites found through Google, which is also updated.
At some time in the past (maybe a few versions ago) when I would download a file from the Web, the "Downloads" window would open and in the window would be displayed the name of the file I was downloading or had just completed downloading. I think I used to be able to then click on that file name and the file (or the installation file if needed to start the new program) would open. I am currently using Firefox 5.0 (the "About Firefox" screen says this is up to date) and when I download a file or document, the "Downloads" window appears on the screen as it always has in the past, but it remains blank, i.e., nothing appears in the downloads box. I don't remember making any configuration changes, etc., that may have caused the window to remain blank, but I could be mistaken. I know how to find the items I've downloaded (My Documents / Downloads) and can usually guess what the name of the downloaded file might be, but it used to be much easier when something (anything) showed up in the downloads window.
I'd love for someone to tell me about a simple fix for this. I'm willing to be quite embarrassed that I did something I shouldn't have.'''

In Firefox Options / Privacy be sure "Remember download history" is checked. To see all of the options on that panel, "Firefox will" must be set to "Use custom settings for history".
To find your OS information, on your Windows desktop, right-click the My Computer icon, choose Properties, under System on that small window is info about your OS.
'''If this reply solves your problem, please click "Solved It" next to this reply when <u>signed-in</u> to the forum.'''

While using FM 'HR_FORMS_TIM_GET_B2_RESULTS' some emps FT_ZES remains blank

Similar Messages

Maybe you are looking for