While using ipad 1 it zooms in and out automatically. advice how to resolve this probelm. i restored the OS twice by using itunes

My Ipad zooms in and out automatically. i am not able to undrstand why? i restored the OS twice. advice what should i do to resolve.

Make sure that Settings > General > Accessibility > Zoom is off - if it's on then you can zoom in and out by double-tapping with three fingers.

Similar Messages

  • Hi my iPad displays "iPad disabled connect to iTunes" when I connect it to iTunes it keeps asking for me to enter password but I can't because the iPad is disabled. Please advice how to resolve this problem. Thanks   Best regards iPad 2, iOS 6.0.1

    Hi my iPad displays "iPad disabled connect to iTunes" when I connect it to iTunes it keeps asking for me to enter password but I can't because the iPad is disabled. Can anyone please advice how to resolve this problem. Thanks
    Best regards
    iPad 2, iOS 6.0.1

    You may need to put the iPad into recovery mode : http://support.apple.com/kb/ht1808 - you should then be able to reset the iPad and restore/resync your content to it

  • I am have problems with the ipad mini, it is a little crazy. It controls by itself, opens and closes application zooms in and out, end my facetime calls, Also Un certain part of the screen is no longer responsive to the touch.

    I am have problems with the ipad mini, it is a little crazy. It controls by itself, opens and closes application zooms in and out, end my facetime calls, Also Un certain part of the screen is no longer responsive to the touch, it Should be having so much problems. Thanks for your help.
    iPad, iOS 7.0.4

    Try reset iPad
    Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
    Note: Data will not be affected.

  • My Mac has lost the keyboard command to zoom in and out (Apple/shift/ /-)  How can I restore this?

    My Mac has lost the keyboard command to zoom in and out (Apple/shift/ /-)  How can I restore this?

    try doing an SMC reset, the following article tells how to do this:
    http://support.apple.com/kb/HT3964
    also go into your keyboard options and make sure the settings are correct there.

  • Grid valueAT  is out of range  how to resolve this issue.

    hi
    i am created one forumula in that i am used 5 fileds values but one filed value is 0 that reason i am getting this error *grid valueAT  is out of range*  how to resolve this issue.

    Hi ,
    Can you please explain bit further
    What king of formula you wrote ?
    Where do you wanna place it ?
    The value zero is it null value if it is yes go to file-> options ->reporting tab -> check convert null value
    If it is not the expected answer let me know the issue in detail.
    Regards,
    Neo.

  • HT201210 could not be updated because of the firmware file is not compatible (how to resolve this problem or ios 6 could not be used on iphone4?)

    could not be updated because of the firmware file is not compatible (how to resolve this problem or ios 6 could not be used on iphone4?)

    Do you have iTunes 10.6.3?
    If not, update iTunes first then try again.

  • HT4946 by mistake my contacts are deleted from iphone and the pc which itunes installed is corrupted, i have the itunes backup folder,is this possible to restore the contacts from my old itunes backup folder to iphone!?

    by mistake my contacts are deleted from iphone and the pc which itunes installed is corrupted, i have the itunes backup folder,is this possible to restore the contacts from my old itunes backup folder to iphone!?

    unless you had them synced with icloud or some other email account, very unlikely

  • HT1338 how to use tap to zoom in and out?

    I have tried to tap using Mt Lion to zoom and out on a web page and it would do it. Can anyone pls advise?

    In an application like Safari, it's a Double-tap with one finger on the Magic Mouse or a double-tap with two fingers on the Trackpad.  Check System Preferences > Mouse/Trackpad to make sure the option is checked.

  • Use Trackpad to zoom in and out - Too sensitive in Safari 4

    Hi, I just installed Safari 4 three days ago. Without changing any settings, now I found out that when I use trackpad to zoom in/out the font, it responses too sensitive than it did in previous Safari. It jumps up/down at least two levels every time I try to adjust the font size. It is not that controllable anymore.
    Has anyone else noticed this? How do I fix this? Thanks!

    Hi
    Welcome to Apple Discussions
    I have the same problem on my MacBook Pro. The zoom feature is way too sensitive for my liking, however, there is no way at the moment to control it. As this is a Beta version, these oddities will occur. Hopefully, when Safari 4 is released in final version (no date yet announced) this problem will be fixed.
    As I previously did, let Apple know what you are experiencing with the trackpad via the Safari Menu>Report Bugs to Apple. If you want to go back to Safari 3, use the Uninstaller that's included in the Safari 4 Downloads package. This is the only safe way to go back to Safari 3.

  • HT200154 Both my apple tis are blinking fast.  I have unplugged everything including the TV but I do not have. Computer only an iPad and do know know how to resolve this matter.

    Both my apple tvs started blinking very fast and yesterday they were both working.  I have plugged and unplugged everything but I do not have a computer only an iPad and do not know of any way to restore the settings

    Here's how you may reset your Apple TV: Restore your Apple TV (2nd and 3rd generation) - Apple Support

  • Shared object and different application servers - how to resolve this issue

    Dear SDN Members,
    We are occuring a big problem. We create a shared object in a program and after we call in an another one. In central system architecture, it is working well. But on a distributed architecture (4 application servers), we have a dump some times. In fact, the read of the shared object can be occured in the AS 4 but the share object has been created in AS1.
    How to manage this problem to avoid this dump ?
    Dupplicate the shared object in the application servers ?
    Encapsulate different calls with RFC link to only one AS ?
    Any parameters on server or share objects ?
    Thanks a lot for your help,
    Points will be given to right or good answers.
    Br,
    Aurélien

    What is the dump you are getting ?
    AFAIK, "Shared Memory"(SHM) is an area defined in the app server. I am not sure if you can access SHM of a different app server (as in your case trying to access SHM of AS1 from AS4). [http://help.sap.com/abapdocu_70/en/ABENSHARED_MEMORY_GLOSRY.htm]
    In this case you can opt for "DataBase Clusters". Relevant ABAP statements: [IMPORT|http://help.sap.com/abapdocu_70/en/ABAPIMPORT_MEDIUM.htm#!ABAP_ALTERNATIVE_4@4@]/[EXPORT|http://help.sap.com/abapdocu_70/en/ABAPEXPORT_DATA_CLUSTER_MEDIUM.htm#!ABAP_ALTERNATIVE_4@4@] FROM/TO DATABASE.
    Hope this helps.
    BR,
    SUhas

  • My home screen icons get misaligned when i switch apps by double tapping the home button. Using iPad Air, My home screen icons get misaligned when i switch apps by double tapping the home button. Using iPad Air

    My home screen icon get misligned when I switch between apps. also subway surfer behave strangley as in there is a graphical glitch

    I have no idea what Subway Surfer should look like so I wouldn't know if there was a graphical glitch in your screenshot or not, but I assume that the brown figure on the left side should, have real definition in the features and details in the clothing rather than just look like a smeary brown blob. That's just a guess on my part.
    I understand that you paid good money for the device and that it should not be doing what you are experiencing. I would start with the basic troubleshooting steps - moving all the way up to a complete restore of the iOS - and if they don't work, then you will have to contact Apple if you want resolution to the problem. They must have an authorized repair facility that you could send the device to if needed.
    Restart, reset, restore.

  • Aurora 30.0a2 toolbar and icons are stretched vertically and out-of-proportion, how to fix this?

    In the latest update changes Aurora 30.0a2, the UI shows the toolbar as stretched vertically. all the icons appear to be about (+/-) 1 to 1.5. This is no major issue and really just a minor visual nuisance but is a bug nonetheless.
    image: http://tinyurl.com/qzx8y6y
    Only the toolbar is affected, all other areas retain their 1 to 1 ratios.

    Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance).
    *Do NOT click the Reset button on the Safe Mode start window.
    *https://support.mozilla.org/kb/Safe+Mode
    *https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

  • Very frequently when I click on a link, this message comes up: Connection was re-set. Then I can use Try again button. Annoying and time-waster. How to resolve this once and for all? In simple English only, please - I'm not a techie. Thanks.

    See question above. Think that says it.

    Maybe these will help:
    https://discussions.apple.com/message/17677533#17677533
    https://discussions.apple.com/message/18324129#18324129
    https://discussions.apple.com/message/18203126#18203126

  • I can't zoom in and out using the scroll wheel

      so i want to zoom in and out on photoshop how i always have...using ctrl and scroll wheel...
    but when i went to do it how i naturally do it, it didnt work..after some research i found you go into preferences, general and tick the box about zoom scroll or somthing.
    Yet when i go onto it i dont have any options about zooming !!?? from what ive seen i have less options than others.
    and im pretty sure it isnt only available on newer version..because i have done it before on really old photoshop versions.
    so any help would be appriciated, thanks

    Photoshop 7 doesn't have a preference for using  Zoom With Scroll Wheel like cs2 and later do, but holding down the Alt key and using the scroll wheel should work
    to zoom in or out.
    Does the Alt key work if you make a selection and then use Alt+Ctrl+D to bring up the Feather dialog?
    Does the scroll wheel work to change the layer blend modes by duplicating the layer and highlighting
    the layer blend mode of Normal in the layers palette and then using the scroll wheel to change blend modes?

Maybe you are looking for