While using oracle forms 6i and database 11g in windows 7, the application getting closed while working on some forms

Hi,
Please advise on the below issue.
While using oracle forms 6i and database 11g in windows 7, the application getting closed while working on some forms.
May i know what is to be done?

MoNo wrote:
Hi Friends...
I'm using windows7 32 bit.
<snip>First, please be aware that oracle products are NOT certified to run on ANY 'home' edition of ANY version of Windows.
Second, did you read the instructions on the page where you downloaded the software -- specifically the part about unzipping TWO downloaded zip files into the SAME directory?
Third, did you read and heed the installation guide, or did you just go straight to 'setup.exe'?

Similar Messages

Having problem to install Oracle Portal Forms Reports and Discoverer 11g on Windows Server 2008 64 bit

Dear All Precious Friends,
I am having problem while installing Oracle Portal Forms Reports and Discoverer 11g on Windows Server 2008 64 bit,
I have already installed Oracle Database 11g Release 2 -------
----Then i configured JAVA Access bridge
--------then installed and configured Required Schema using Repository Creation Utility of same version of Database 11g,
-----------then installed Oracle Business Intelligence 11g version 11.1.1.6.0 which includes Web logic..............I am feeling that i did right at this point...........
..............also feeling comfortable after install Oracle Identity and Access Management 11g ..................
-----------------but don't know how to configure OID to install Oracle Portal Forms Reports and Discoverer 11g...............
Please help my Oracle Friends
Your early help will be highly appreciated.
thanks and regards
Hassan

You said, "...+I would like to install Release 2(11.1.1.2.0)+ ...". Be careful. 11.1.1.2.0 is not Release 2. The version for Rel 2 is 11.1.2.0, notice that there is one less "1". Also, there is no way to patch from Release 1 to Release 2.
In EDelivery, this is what you should find if you search on "Oracle Fusion Middleware" for "Microsoft Windows x64 (64-bit)":
First look for this link then drill into it:
Oracle Fusion Middleware 11g Media Pack for Microsoft Windows x64 (64-bit)
In this section you will find the following:
This is the full product installation of FMw 11 Release 2 (Forms & Reports)
Oracle Forms and Reports 11g R2 (11.1.2.0.0) for Microsoft Windows x64 (64-bit) V28761-01
This is the full product installation of FMw 11 Release 1 (includes Portal, Forms, Reports, and Disco)
Oracle Portal, Forms, Reports and Discoverer 11g (11.1.1.2.0) for Microsoft Windows x86 (64-bit) (Part 1 of 4) V18785-01
Oracle Portal, Forms, Reports and Discoverer 11g (11.1.1.2.0) for Microsoft Windows x86 (64-bit) (Part 2 of 4)
Oracle Portal, Forms, Reports and Discoverer 11g (11.1.1.2.0) for Microsoft Windows x86 (64-bit) (Part 3 of 4)
Oracle Portal, Forms, Reports and Discoverer 11g (11.1.1.2.0) for Microsoft Windows x86 (64-bit) (Part 4 of 4)
This is the FMw 11 Release 1 patch set that will bring the above 11.1.1.2.0 installation to 11.1.1.6. This is NOT a full product installation - just a patch
Oracle Portal, Forms, Reports and Discoverer 11g Patch Set 5 (11.1.1.6.0) for Microsoft Windows x86 (64-bit) V29850-01
There are no patch sets for Release 2 as of yet.

I own an ipod touch 5th gen ios 7.1 and while using it suddenly black and white vertical stripes appeared on the screen and now it wont turn on!!!what should i do?

i own an ipod touch 5th gen ios 7.1 and while using it suddenly black and white vertical stripes appeared on the screen and now it wont turn on!!!what should i do?

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

NLS_LANG value that suits Forms 10G and Database 11G wanted !

I can't believe how bad is to install Oracle Database and Oracle Forms on the same Windows Vista machine!
I had a problem in Oracle Forms 10g that prevents many items in the Form Builder menu from appearing in English Language and also prevents anything in the web-based forms runtime from appearing in English. I searched the forum for a solution and found that I have to set a NLS_LANG value in the environment variables equal to the following: AMERICAN_AMERICA.WE8MSWIN1256.
I did this and my Forms builder looked great. Everything in english with no problems. But now what ?! The Oracle Database itself refused to connect from all clients! It refused to connect from Forms Builder, SQL Deeveloper, and even from SQL PLUS! The error given is: ORA-12705: Cannot access NLS data files or invalid environment specified.
It seems that what I exactly need is a NLS_LANG value that will satisfy both Oracle Forms 10G and Oracle Database 11G that both are installed on the same Vista machine. The question is: What could this NLS_LANG value be?!
Thank you in advance

If you have connected to the database on which the form is based, prior to running the form from the Builder, the uname and password will automatically be passed in at startup and you will not be prompted.
If you would rather hard code a username and password, enter it in formsweb.cfg. For example:
SYNTAX:
userid=<USERNAME>/<PASSWORD>@<DB NAME>
EXAMPLE:
userid=scott/tiger@orcl
Remember that this change will only impact runtime and have no effect on the Builder.

HT4864 I'm using Mail 4.5 and Snow Leopard 10.6.8; the posted settings don't work

Are there any settings for IMAP mail that work with iCloud accounts. I have MobileMe mail accounts but all devices are not running Lion.

Download the Mac OS X 10.6.8 Update Combo
Then use Pacifist to extract the Safari app from the v10.6.8 .dmg folder.

Oracle Portal,Forms,Reports and Discoverer 11G

Good evening
I installed the following products
* Oracle Database(to the 1st computer)
* Repository Creation Utility
* WebLogic Server(to the 2nd computer)
* Oracle Portal,Forms,Reports and Discoverer 11G(to the 2nd computer) – during installation I chose forms and reports
Identity Management and SSO are not installed, why they are used for?
While connecting to the base with the help of Visard I open Oracle Forms Builder by and create a primitive form. Everything is good. All are shown. I press Run Form which is written as Oracle Forms in browser and suggests keeping a clear file. Particularly in applied file!
Print screen of my monitor yo can see: http://www.sql.ru/forum/actualthread.aspx?tid=678852
Thanks for attention.

Identity Management and SSO are not installed, why they are used for?IDM and SSO is used for user authentication.
You can search for details about that.
>
While connecting to the base with the help of Visard I open Oracle Forms Builder by and create a primitive form. Everything is good. All are shown. I press Run Form which is written as Oracle Forms in browser and suggests keeping a clear file. Particularly in applied file!
Print screen of my monitor yo can see: http://www.sql.ru/forum/actualthread.aspx?tid=678852
Thanks for attention.the port which you have mentioned is it WLS_FORMS_PORT or any other.
Try running default Forms port WLS_FORMS_PORT that will be 9001
or check for the WLS_FORMS_PORT in the portlist.ini file.
Also are you getting any exception in the Java console.?

Is 1GB ram is enough for the installation of oracle developer suite 10g and database 11g??? And which one to install first developer suite or database????

Hello everyone,
I have install windows XP in my existing windows 7 64 bit system using virtualization software. I have allocated 1024 MB of RAM to XP virtual windows.
Now, M trying to install oracle developer suite 10g and oracle database 11 in the XP windows.
IS 1GB ram is enough for the installation of oracle developer suite 10g and database 11g???
And which one to install first developer suite or database????
Thanks in advance.

you should check (before installing) requeriments from documentation.
Oracle Developer Suite Installation Guide 10g (10.1.2.0.2) for Solaris, Windows and Linux x86
Table 4 Memory Requirements for Oracle Developer Suite Components
Component
Memory
Oracle10g JDeveloper (including Oracle Business Intelligence Beans, and UIX and Bali subcomponents)
Minimum: 256 MB
Recommended: 512 MB
Oracle Reports Developer
Minimum: 128 MB
Recommended: 256 MB
Oracle Forms Developer
Minimum: 128 MB
Recommended: 256 MB
I usually install first database and later DS, I never tried first DS and later database.

SQL types over PLSQL types while using Oracle Applications adapter in BPEL

Use SQL types over PL/SQL types while using Oracle Applications adapter
in BPEL/ ESB
This document will be focusing on Oracle Applications adapter. However Database adapter is much like OA adapter (even OA adapter uses DB Adapter), so the readers who are interested to explore DB adapters, can relate things with this document and go further as well.
Some Guidelines for writing PL/SQL APIs for OA Adapter
As we know when we create a partner link from the OA adapter wizard it sometimes writes some wrapper script supportive to the OA Adapter WSDL which contains below
* Object type for PL/SQL RECORD
* Nested table of the given type for PL/SQL TABLE. For example, the nested table of NUMBER.
* INTEGER substituted for PL/SQL BOOLEAN
* Wrapper Script for converting above three set of data types . (PLSQL to SQL and SQL to PLSQL conversion functions)
In runtime this wrapper script for converting PL/SQL to SQL and SQL to PL/SQL is an extra overhead.
So the first advice would be to avoid the use of the below as parameters of PLSQL API being called by OA Adapter.
* PL/SQL RECORD
* PL/SQL TABLE. For example, the nested table of NUMBER.
* PL/SQL BOOLEAN
In other way we can say we should try to use only SQL data types in arguments if we are planning to call any PL/SQL API from the OA Adapter.
If the requirement is to use a table or record uses the Object type. In place of BOOLEAN better to use VARCHAR or INTEGER what ever fulfills your requirement. Following this guideline we can reduce a huge number of Line of codes to be run each time the adapter being called.
Generally, Oracle E-Biz standard APIs use PL/SQL record types and table types so when there is a requirement to call these API’s from OA Adapter (this is a common requirement in development), and if we directly browse the API in OA Adapter Configuration Wizard and create the partner link, again a huge number of code is written by the wizard in the wrapper script (a number of extra mapping of fields which are not being used in the interface).
In this case better would be to create an Object type with only the required fields which are being used in that call and use them as parameters for the PLSQL API.

Find the complete document
http://www.4shared.com/file/167171882/29525116/Use_SQL_types_over_PLSQL_types.html

How to start to use Oracle client to access Database ?

Folks,
Hello. I have just installed Oracle Client into directory /home/myOracle/Oracle_Client. But I don't know how to start and configure the client to access Oracle Database.
Can any folk tell me how to start to use Oracle client to access Database ?

user13764998 wrote:
I have earlier managed to install the Oracle Client (32-bit) in 32-bit clients and servers Oracle Client 10.
The reason that it went well before was the exellent setup and configurationprograms we got with that version.It seems you are confusing the "full" Datbase Client with Instant Client.
Now I'm trying to install the Oracle Instant Client 11g R2 both 32-bit and 64 (of the latest revision) on a 64-bit Windows 2008 Server .
I have managed to install the driver but the setup doesn't give me any Net Configuration Assistant or Net Manager to help with the configuration.What setup? Are you not using just the zip files?
What are you installing exactly, i.e. what install media (file) did you download?
So I haven't succeded in configuring it despite I I read the readme-info that comes with the Instant Client files.There's not much to configure - that's sort of the point of Instant Client. Just drop a few files in a folder, set PATH and off you go.
Doesn't <instant client dir>\sqlplus user@'hostname/servicename' work?

Slow first connection using Oracle 10g xe and Visual Studio 2008

{noformat}
Good day,
I'm slightly unaccustomed to using forums, so bear with me.
My initial connection to the Oracle database takes approximately 30 seconds. It seems to be waiting for a connection before timing out and trying another connection which works, as all subsequent connections work immediately. I'm unsure how other people's responses in forums can help me due to the plethora of configurations, so here's mine. My comprehension of the oracle world is still growing, you'll have to explain the terms you're using for me, Hoping you can help.
I'm using Visual Studio 2008, set to use 32 bit debug mode, on a Windows 7 Pro platform. Also using Oracle 10g Xe, and have installed the 32 bit version of ODAC 11.2 (11.2.0.1) to aid making a connection from Visual Studio to Oracle.
I have a database set up and a user with system admin rights. This is all local for a programming project and will never see the light of day outside of my personal machine.
I am using code to connect, not the GUI. I wish to code this project completely without the aid of the GUI. so my connection string within Visual Studio C# is (pw/id hidden)...
string xe = "Data Source=xe;User Id=xxxxx;Password=xxxxx;";
OracleConnection conn = new OracleConnection(xe);
My c:\devsuitehome\network\admin\sqlnet.ora file is this:
# sqlnet.ora Network Configuration File: C:\DevSuiteHome\network\admin\sqlnet.ora
# Generated by Oracle configuration tools.
SQLNET.AUTHENTICATION_SERVICES= (NTS)
NAMES.DIRECTORY_PATH= (LDAP, TNSNAMES, EZCONNECT, ONAMES, HOSTNAME)
And my c:\devsuitehome\network\admin\TNSNames.ora file is this:
tnsnames.ora Network Configuration File: C:\DevSuiteHome\network\admin\tnsnames.ora
Generated by Oracle configuration tools.
XE =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = 127.0.0.1)(PORT = 1521))
(CONNECT_DATA =
(SERVICE_NAME = xe)
EXTPROC_CONNECTION_DATA =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = <machine name)(PORT = 1521))
(CONNECT_DATA =
(SERVICE_NAME = PLSExtProc)
Just for good measure, my tnsping xe shows:
"Used paramter files: 
c:\devsuitehome\network\admin\sqlnet.ora 
Used TNSNAMES adapter to resolve the alias 
Attempting to contact (DESCRIPTION = (ADDRESS_LIST = (ADDRESS = (PROTOCOL = TCP)(HOST = 127.0.0.1)(PORT = 1521)))(CONNECT_DATA = (SERVICE_NAME = xe)))
OK (0 msec)"
So, how can I make that initial connection faster so I don't spend 15 years testing my application due to slow start-ups? :)
Thank you.
Kevin.
{noformat}
Edited by: 832285 on Jan 29, 2011 10:08 AM
Edited by: 832285 on Jan 29, 2011 10:10 AM

I have formatted my hard drive since my first post. I was running window 64 bit with a higher version of the ODAC and that proved to crash my machine with faulty error messages about memory. I have reverted to a previous version of the ODAC tools and everything works very smooth now. Still the connection time is consistently 20 seconds or longer on the first attempt.
Just a little more information.. I am currently taking a college course with 15 other students, as you can tell by the impersonal machine name, where programming using visual studio 2008, and Oracle 10g xe is expected. All of us are using a 64 bit environment and we all have difficulties cutting down the load time of making the first connection to Oracle. Some people are longer making the connection, but none are shorter.
One other note. After the first connection is made, taking 20 or more seconds, and is closed, all subsequent openings of the connection are instantaneous, for all of us.
If there is ANYTHING more I can get for you, please let me know. With my environment stable as it is, I will not need to format or change any information for the foreseeable future.
Here is the information you requested
1 The connection method I am using, I have chosen the manual connection for you, however the delay exists if the connection is made through the GUI as well.
Historically, I am getting slow connection speeds through adding the connection through the GUI or by a manual connection. Here is how I am doing it manually. I have the connection being created in 20 seconds, which is the best I can get.
Imports Oracle.DataAccess.Client
Also included project reference: oracle.dataaccess / version 2.111.6.20
 Private Sub Form1_Load(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles MyBase.Load
 Dim connString As String = "Data Source=XE;User Id=abc;Password=abc;"
 Dim con As OracleConnection = New OracleConnection()
 con.ConnectionString = connString
 Try
 con.Open()
 MessageBox.Show("Connected!")
 con.Close()
 con.Dispose()
 Catch ex As Exception
 MessageBox.Show(ex.Message)
 End Try
 End SubMy current TNS Ping results
TNS Ping Utility for 32-bit Windows: Version 10.2.0.1.0 - Production on 16-FEB-2011 01:02:36
Copyright (c) 1997, 2005, Oracle. All rights reserved.
Used parameter files:
C:\oraclexe\app\oracle\product\10.2.0\server\network\admin\sqlnet.ora
Used TNSNAMES adapter to resolve the alias
Attempting to contact (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)(HOST = 127.0.0.1)(PORT = 1521)) (CONNECT_DATA = (SERVER = DEDICATED) (SERVICE_NAME = XE)))
OK (0 msec)2 Connection to SQL plus is instantaneous.
I fought for weeks about the ODAC version 11.2.0.1 that you see in the previous post, and that would be a whole new thread. Suffice it to say I have a reliable environment to program in with this 10.2.0.1.0 version that I am running now, and the connection time has not changed, it is still minimum 20 seconds load time, sometimes up to 25.
3 Ram usage in my typical environment
I am running this laptop with 4 gigs of ram. This is a typical environment I would be running my application in.
Physical memory
total 4090
cached 1753
available 2345
free 656
system
handles 27141
threads 911
processes 70
commit megs 2860/8179
kernel memory megs
paged 201
nonpaged 52
4 I formatted my machine and reinstalled the Windows 7 professional operating system as of a few nights ago. The Oracle software on my machine is
Oracle Database 10g express edition
ODAC 11.1.0
I amm not sure what filename you would need in addition to the product names that I have installed.
5 The information from the SET command is
ALLUSERSPROFILE=C:\ProgramData
APPDATA=C:\Users\stepheke\AppData\Roaming
CommonProgramFiles=C:\Program Files\Common Files
CommonProgramFiles(x86)=C:\Program Files (x86)\Common Files
CommonProgramW6432=C:\Program Files\Common Files
COMPUTERNAME=STEKEV0908
ComSpec=C:\Windows\system32\cmd.exe
FP_NO_HOST_CHECK=NO
HOMEDRIVE=C:
HOMEPATH=\Users\stepheke
LOCALAPPDATA=C:\Users\stepheke\AppData\Local
LOGONSERVER=\\STEKEV0908
NUMBER_OF_PROCESSORS=2
oracle_sid=xe
OS=Windows_NT
Path=C:\Program Files\Common Files\Microsoft Shared\Windows Live;C:\Program Files (x86)\Common Files\Microsoft Shared\Windows Live;C:\Oracleapp\stepheke\product\11.1.0\client_1;C:\Oracleapp\stepheke\product\11.1.0\client_1\bin;C:\oraclexe\app\oracle\product\10.2.0\server\bin;C:\Windows\system32;C:\Windows;C:\Windows\System32\Wbem;C:\Windows\System32\WindowsPowerShell\v1.0\;c:\Program Files (x86)\Microsoft SQL Server\90\Tools\binn\;C:\Program Files (x86)\Windows Live\Shared
PATHEXT=.COM;.EXE;.BAT;.CMD;.VBS;.VBE;.JS;.JSE;.WSF;.WSH;.MSC
PROCESSOR_ARCHITECTURE=AMD64
PROCESSOR_IDENTIFIER=Intel64 Family 6 Model 23 Stepping 10, GenuineIntel
PROCESSOR_LEVEL=6
PROCESSOR_REVISION=170a
ProgramData=C:\ProgramData
ProgramFiles=C:\Program Files
ProgramFiles(x86)=C:\Program Files (x86)
ProgramW6432=C:\Program Files
PROMPT=$P$G
PSModulePath=C:\Windows\system32\WindowsPowerShell\v1.0\Modules\
PUBLIC=C:\Users\Public
SystemDrive=C:
SystemRoot=C:\Windows
TEMP=C:\Users\stepheke\AppData\Local\Temp
TMP=C:\Users\stepheke\AppData\Local\Temp
USERDOMAIN=stekev0908
USERNAME=stepheke
USERPROFILE=C:\Users\stepheke
VS90COMNTOOLS=c:\Program Files (x86)\Microsoft Visual Studio 9.0\Common7\Tools\
windir=C:\Windows

Oracle Audit Vault and Database Firewall implementaion

Dear All,
we are planning to implement Oracle Audit Vault and Database Firewall on 2 node 11g RAC/solaris10, please advise me to ahead in details
Thanks

Recently purchased Audit Vault and Database Firewall
My question is with Audit Vault.
All of the documentation says that i need Oracle Linux 5.8 as part of the installation. We do not have any servers now that support 5.8 currently. When I check the HCL for Oracle Linux 5.8 i see only 4 Oracle servers that support this version
Sun Server X2-4
Sun Server X2-8
Sunfire X2270 M2
Sunfire X4470
The only two servers that are currently offer for purchase by Oracle are the X2-4 and X2-8 which are way overkill both in power and price for this application.
The X2270 M2 would fit nicely, but is no longer offered for sale. In it place is the X3-2 which would fit nicely, but it listed as supporting Oracle Linux 5.8. Oracle Linux 5.9 is supported on the X3-2.
My question is will Oracle Linux 5.9 or newer install to support Audit Vault? The documentation specifies Linux 5.8. Is this flexible or not?
Thanks,

Java.sql.SQLException: Internal Error while using oracle.sql.ARRAY.getArray

Hello All,
Here is the issue description. Our application uses Oracle Object Types and LIST. We deployed our application on QA environment which has Oracle 10g. Application runs fine...no issues. Now we moved to UAT. UAT environment is same as QA environment and DBA have created replica of QA database.
Now WAR file which works fine with QA database , somehow doesnt work with UAT database. Application throws following exception when code tries to call getArray() on java.sql.Array.
We tried to point UAT weblogic to QA database and it worked fine.....but when we point UAT weblogic to UAT database , we get following exception. So we know that this is a database issue.
DBA claims that QA env database and UAT env database are same.
Can anybody please tell me what wrong here? What setting is not done on UAT database which is done on QA?
java.sql.SQLException: Internal Error at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:125) at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:162) at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:227) at oracle.jdbc.oracore.OracleTypeCOLLECTION.initCollElemTypeName(OracleTypeCOLLECTION.java:975) at oracle.jdbc.oracore.OracleTypeCOLLECTION.getAttributeType(OracleTypeCOLLECTION.java:1005) at oracle.jdbc.oracore.OracleNamedType.getFullName(OracleNamedType.java:96) at oracle.jdbc.oracore.OracleTypeADT.createStructDescriptor(OracleTypeADT.java:1958) at oracle.jdbc.oracore.OracleTypeADT.unpickle81(OracleTypeADT.java:1432) at oracle.jdbc.oracore.OracleTypeUPT.unpickle81UPT(OracleTypeUPT.java:426) at oracle.jdbc.oracore.OracleTypeUPT.unpickle81rec(OracleTypeUPT.java:383) at oracle.jdbc.oracore.OracleTypeCOLLECTION.unpickle81_imgBody_elems(OracleTypeCOLLECTION.java:928) at oracle.jdbc.oracore.OracleTypeCOLLECTION.unpickle81_imgBody(OracleTypeCOLLECTION.java:872) at oracle.jdbc.oracore.OracleTypeCOLLECTION.unpickle81(OracleTypeCOLLECTION.java:692) at oracle.jdbc.oracore.OracleTypeCOLLECTION._unlinearize(OracleTypeCOLLECTION.java:217) at oracle.jdbc.oracore.OracleTypeCOLLECTION.unlinearize(OracleTypeCOLLECTION.java:189) at oracle.sql.ArrayDescriptor.toJavaArray(ArrayDescriptor.java:663) at oracle.sql.ARRAY.getArray(ARRAY.java:282) at weblogic.jdbc.wrapper.Array_oracle_sql_ARRAY.getArray(Unknown Source)
Please help.

425260 wrote:
This can happen if you use the oracle.sql.ARRAY class with WebLogic.
WebLogic wraps oracle.sql.ARRAY with its own class (i.e. weblogic.jdbc.wrapper.Array_oracle_sql_ARRAY). The easiest solution is to replace oracle.sql.ARRAY with the JDBC standard java.sql.Array.
<PRE class=jive-pre><CODE class="jive-code jive-java">Object[] items = (Object[])array.getArray();
if (items.length > 0) {
for (int i = 0; i < items.length; i++) {
Object arrayItem = items;
}
}
</CODE></PRE>
The array object is a java.sql.Array. Here no unwrapping of the WebLogic wrapper is needed.
If you absolutely need the oracle.sql.ARRAY class than you must use an unwrap API on the WebLogic wrapper class.
<PRE class=jive-pre><CODE class="jive-code jive-java">if (object instanceof weblogic.jdbc.wrapper.Array)
array = (ARRAY) ( ((weblogic.jdbc.wrapper.Array)object).unwrap(Class.forName("oracle.sql.ARRAY")) );
else
array = (ARRAY) object;
</CODE></PRE>
Here, array is an oracle.sql.ARRAY. Try to see if this <A class=bodylinkwhite href="http://www.software-to-convert.com/3gp-conversion-software/3gp-to-myspace-video-software.html">helps</A>. Good luck.
Thanks for your explanation! It's very valuable, It is exactly what I need, I understand this part.

How to differentiate IAS ORACLE Home Patches and database patches

Hi Team,
I would like to know how to find out the difference between IAS ORACLE Home patches and Database patches.
I am new to oracle apps.
Please let me know.
Thanks,
Kamal

user10493335 wrote:
Hi Huseein
Here is the patch number Patch 13919058
we are on e-business suite 12.1.3.How to integrate oracle e-business suite with ODI.
Thanks,
KamalIt should be applied to ODI ORACLE_HOME -- How To Install Oracle Data Integrator (ODI) 11g Interim Patches (PSE) With OPatch [ID 1235136.1]
Thanks,
Hussein

Oracle Web Cache and OBIEE 11g

Anyone using Oracle Web Cache with OBIEE 11g?
Can I get an insight into whether this solution is beneficial? Or I shouldn't even bother.

No iam not using oracle web cache
Can I get an insight into whether this solution is beneficial? Or I shouldn't even bother.I dont have idea about it,but i think its not beneficial ,anyways there is OBIEE cache that is more than sufficient.
hope answered your question.
Cheers,
KK

Oracle Audit Vault and Database Firewall X SAP

Hello,
Someone has or had any experience on implementing "Oracle Audit Vault and Database Firewall" in a SAP environment?
I would like to know the impacts of this implementation for SAP System.
Is there anything we have to concern about it from SAP side?
Regards,
Richard Brehmer

Well,
In case of someone needs it.
I found something in Note: 105047
https://websmp230.sap-ag.de/sap(bD1wdCZjPTAwMQ==)/bc/bsp/sno/ui_entry/entry.htm?param=69765F6D6F64653D3030312669765F7361…

While using oracle forms 6i and database 11g in windows 7, the application getting closed while working on some forms

Similar Messages

Maybe you are looking for