While using the new Firefox 8 or Aurora, my bars on top keep disappearing and the entire page will flash black randomly while I'm moving my cursor, can anyone help?
Essentially what happens when I start up my browser is that the window pops up and while I go to click on the search bar, it fills in black. When I click on the searchbar, when the text in it is supposed to become highlighted, its a black bar over the text. When I go to hit the back button, the bar will completely strobe on and off. While of facebook, I try to click my scroll bar, but it doesn't register as being selected while I'm holding down the left mouse button. Finally, like stated in the question, when I'm on any site, any hyperlinks that I scroll over turned to blacked out blocks, as do pictures, and occassionally the entire window just blacks out.
Essentially what happens when I start up my browser is that the window pops up and while I go to click on the search bar, it fills in black. When I click on the searchbar, when the text in it is supposed to become highlighted, its a black bar over the text. When I go to hit the back button, the bar will completely strobe on and off. While of facebook, I try to click my scroll bar, but it doesn't register as being selected while I'm holding down the left mouse button. Finally, like stated in the question, when I'm on any site, any hyperlinks that I scroll over turned to blacked out blocks, as do pictures, and occassionally the entire window just blacks out.
Similar Messages
-
i cant install the new firefox 6 on my laptop because it keeps asking for the administrator password during the installation and i dont know what is it for this laptop
I read a way on another forum to fix this problem. Right click on the setup.exe and select "Run as administrator" this should solve your problem.
-
I purchased a 3TB Airport Time Capsule to use with my Mac running latest Maverics. After 8 hours been able to configure the box using Ethernet connection but now I want to move my current backups from my small driveand it wants authentication but no box is available to provide my administrator name can anyone help ?
I overcame the permissions by allowing both paths to have read and write access to anyone but that didnt solve it until I copied it into the DATA directory which I created on the Airport Time Capsule.
I had already discovered the TIME MACHINE How to transfer backups but I am struggling still with the item and cannot currently get it to work. My setup seems to have created a wireless link to my router which is what I wanted and in that set up there are three options. I have simply gone for the extension of my network. I ignored the other option there which I cannot remember something like DNS? That may be the problem becasuse when I remove the Ethernet connector it just doesnt go anywhere.
I have also found I cannot update my TIME MACHINE software (currently 1.3) as although Apple tell me I should be able to set backups hourly daily or weekly I have only ever been able to run it hourly when i would prefer longer intervals so thought an update might be necssary.
Also tried to get an update for my Airport Utility (Currently 6.3.2 but cannot find one even though I have read there might be one available and again this might be the problem.
Have reset the Time Capsule now about a dozen times.
Following the instructions and trying to copy my existing backup it suggests you need to copy it to the root directory but that is when I get some sort of security issue and I found I could only get it to accept if I dragged my .backupdb to the DATA directory on the Time Capsule. I dont even know if I do this it will work when I come to use it.
I therefore found your reply of no more help than i had discovered but I hope you return to read this note because I really do need some help.
I am intending starting again in the next couple of days and fully documenting what I do and what I see and then as I suspect it will be no different and I will then seek an appointment at the Apple Store in Trafford Centre and if that proves unsuccessful then I still have time to return and become a dissatisfied customer with Apple for the first time in a long experience with Apple. I have noticed frightening notes on the conversations which point to problems of Mavericks working with Airport Time Machine!! So in the end it might not be me doing anything wrong. Unfortunately you do feel left out in the dark sometimes that is why I hope you can respond with a solution? -
I recently updated my Iphone4 to IOS5. The NEW profile picture of my contacts keep disappearing and the old photo comes back on whenever I do a sync. How do I solve this?
Please search the forums. This has been covered here extensively.
-
i just purchased a new 21.5 iMac and would like to copy my iPhoto from my old iMac's time capsule can anyone help me ?
You might consider restoring to factory specs, as detailed in the booklet that shipped witht the machine, using the Setup Assistant on first boot, and then reinstalling those new programs. i've not moved pictures, so you could always give that a shot.
-
i am using windows 8 and i cant sign in icloud because i have a server error popping up can anyone help?
In the course of your troubleshooting to date, have you worked through the following document?
Apple software on Windows: May see performance issues and blank iTunes Store -
I recently had to install a new hard drive in my computer. This caused me to have to reload all content back to my iTunes and iPod. I have many apps on my iPod and i don't know how to transfer those back to my iTunes. Can anyone help?
Right clicking on your ipod in the device list an d choosing "transfer purchases" will copy apps and bought media from iTunes to your computer. Due to the new iTunes library on your new HD, iTunes will erase your ipod during the first sync. To save your data to the computer take a look at this article about saving data from your device to a computer: http://support.apple.com/kb/HT4137
Basically it's backing up manually, transferring her purchases (apps and bought music), letting iTunes erase the ipod due to the new iTunes library, and restoring from the manual backup again, to get all the data and settings back.
Make sure your new computer account is authorized in iTunes. Disable autosync in itunes, connect your ipod, right click on it in the device list and choose backup.
This will save data, pictures and settings to itunes. See what's included in this backup here: http://support.apple.com/kb/HT1766
Transfer your purchases the same way to copy all apps and bought media from the Store to your computer.
Set up at least one contact and event on your computer to be able the merge your calendars and contacts after your ipod got wiped during the first sync.
The rest of the data can be restored from the backup you made.
Restoring: http://support.apple.com/kb/HT1414
Music is one way only, from the computer to your device, unless you bought the songs in itunes and transferred your purchases.
There is 3rd party software out there, but not supported by Apple, see this thread: http://discussions.apple.com/thread.jspa?threadID=2013615&tstart=0 -
I’m using windows 7 and working in office 2010. I have installed iCloud and I can’t print my calendar from outlook all it will print is a blank calendar no appointments or birthdays . can anyone help please.
GeoffI had a similiar problem, with my multiple devices. I open iTunes and when all devices were connected I went to the info section on each device. Under info I checked the sync calandars. Under that I click all calanders. I then did the apply in low right. I then did the sync function and it fixed it for me. You have to do this for each device.
I also checked the device (ipad,Iphone) themselves and change the calander selection to NO Catagory. Hope this helps. -
hey guys,i tried to install the latest version of itunes but when i try to open it,it just comes up windows error 2 apple application support was not found,can anyone help me out and tell me what i need to do pls ?
If you run into the "another installation" message even after the reboot of the PC (which is an excellent idea by HTP ProXy), reregistering your Windows Installer Service is worth a try.
First, launch a command prompt as an administrator. In your Start search, type cmd then right-click on the cmd that comes up and select "Run as administrator".
At the command prompt:
Type %windir%\system32\msiexec.exe /unregister and hit enter.
Type %windir%\syswow64\msiexec.exe /unregister and hit enter.
Type %windir%\system32\msiexec.exe /regserver and hit enter.
Type %windir%\syswow64\msiexec.exe /regserver and hit enter.
Restart the PC and try another reinstalll. -
my forward text message feature on IOS8 keeps disappearing and the only way I know to make it re-appear is by powering off and on my phone. Is there any other way to fix this?
I should also point out that when I connect my iPhone, it DOESN'T appear as a connected drive on the desktop. Not sure how this can be so, since the iPhone also has a drive and also functions as an iPod if I want it to. I must have changed some setting to achieve this non-appearance, but don't remember what I must have done.
What's the secret? -
Can I set the stroke of an object to be on top/in front and the fill on the bottom/in back?
Can I set the stroke of an object to be on top/in front and the fill on the bottom/in back? I asked this question before and was told to go to appearance and drag the fill and stroke around as if they were a layer, but this did not bring my stroke to the top of the image. Did I do this wrong somehow or is there another method?
Erin,
The default stacking order for an object with fill and stroke, such as a simple path, is that the stroke is on top and the fill is beneath it.
You may change that in the Appearance palette, but it should not be necessary.
Can you show a screenshot with the object and the Appearance palette and the Layers palette with the relevant (part of the) Layer expanded and visible?
If things are really wrong, you may start considering going down this dark road:
The following is a general list of things you may try when the issue is not in a specific file (you may have tried/done some of them already); 1) and 2) are the easy ones for temporary strangenesses, and 3) and 4) are specifically aimed at possibly corrupt preferences); 5) is a list in itself, and 6) is the last resort.
1) Close down Illy and open again;
2) Restart the computer (you may do that up to 3 times);
3) Close down Illy and press Ctrl+Alt+Shift/Cmd+Option+Shift during startup (easy but irreversible);
4) Move the folder (follow the link with that name) with Illy closed (more tedious but also more thorough and reversible);
5) Look through and try out the relevant among the Other options (follow the link with that name, Item 7) is a list of usual suspects among other applications that may disturb and confuse Illy, Item 15) applies to CC, CS6, and maybe CS5);
Even more seriously, you may:
6) Uninstall, run the Cleaner Tool (if you have CS3/CS4/CS5/CS6/CC), and reinstall.
http://www.adobe.com/support/contact/cscleanertool.html -
I deleted one of the email accounts from my i5 because I don't like all the password popups since upgradingto ios 7.2, and now ALL calendar entries are gone! I need them!!! Can anyone help?
Well you need to add the email account back to get the calendar entries. Transfer them to another email provider. Then delete the account you don't want.
-
i have an iphone 3gs it has been dropped i have connected it charge and its saying reactivation requiered then asks to connect to itunes when i connect it to the laptop it will not connect to itunes but i dont no why can anyone help plz
Sounds like you broke it.
-
My new mags won't download even though my subscriptions are up to date. After 2 weeks of frustration I still am clueless. Can anyone help? I am set to automatic uploads when new mags are available and still nothing. So frustrating when I have paid for them.
Maybe you do not have enough space on iPad.
-
Ever since I updated to the new Firefox sync my bookmarks have stopped showing up on my iphone Sync for Firefox. I even downloaded the Apollo browser, but bookmarks still are not showing. Can someone help?
Firefox 29 has a new version of Sync, so whatever you're using on the iPhone for Sync will need to be updated to be compatible with the new Sync.
Maybe you are looking for
-
'Tracking' taken out of RichText tag?
Morning, I just installed the engrdrop of FB4 (v.4.0.0.239344), and when i imported my FC project, the RichText tags had the method of 'tracking' and a value of -4%. went to compile this and run. and got errors on the complie saying that tracking as
-
Mail 7.3 (1878.6) not displaying images in random messages.
In the last couple of weeks, I've noticed that, with no preference changes made by me, that random messages are not displaying images only empty boxes with the small blue question-mark box in the middle. This is almost exclusively from companies and
-
Cascade lov in a "form with a report"
I am fairly new to HTMLDB and struggling with this one. Can anyone help? I have built a test application that uses a form with report, created using the wizard.On the form I have cascaded LOVs( SITEOWNER and SITE) . The second LOV should depend on th
-
Asset report not tally to GL balance
Hi Expert, When I view report S_ALR_87011965-by Business Area and compared to FS10N view by business area as well but some how the figures are difference. Anybody know what's wrong and how to check what caused the difference? thanks
-
Passing attribute values to custom SOA
Hi All I created a custom SOA wokflow based upon the the auto approval workflow but I noticed the basic fields like "first name" and "last name" is not passed over to the SOA composite. can you please let me know how can we pass those values ? Thanks