While using the phone, the phone will restart regularly. iphone5s

While using the phone, the phone will restart regularly.
While using the camera after taking a picture, the camera will crash and cause the phone to restart.
Sometimes the touch screen does not work and the phone will restart.
This happened after the update IOS
thanks

Have you tried a reset?
Restore from backup?
Restore as new?

Similar Messages

  • While using my iPhone the system behavior changed where I now have to click on the app to select it, then double click to launch it. Same goes for entering in my password to access the phone and entering digits to make a phone. I am also having trouble

    While using my iPhone the system behavior changed where I now have to click on the app to select it, then double click to launch it. Same goes for entering in my password to access the phone and entering digits to make a phone. I am also having trouble swiping the screen to move to the next page. This is no longer working. I did not change any settings, the phone just started behaving this way. Any ideas on how to revert back to the single click selection/launch? Any assistant is greatly appreciated. Thank you!

    Edge has very clear restrictions, one being that you must have 6 months of clean payment history which you don't. Either wait until April 14, or good luck at Sprint.
    I am unsure how it can be determined the payment mix up was the fault of CS, but regardless, the mix up was done. There can be any number of reasons why a payment could be missed without any fault on your part, however you are still the responsible party for the account and must live with the repercussions.

  • Recently while using my iMac the display will just cut off but the machine is still running and I have to press the power button to get the display to cut back on. What is causing this?

    Recently while using my iMac the display will just cut off but the machine is still running and I have to press the power button to get the display to cut back on. What is causing this?

    Look in System Preferences/Energy Saver.

  • How does one use Sound sticks while using HDMI at the same time ??

    How does one use Soundsticks while using HDMI at the same time ??

    Hi Caleb,
    This isn't a precise answer but a possible workable solution. SoundSource puts a menu extra which allows you to switch input/output and has an option for Auto-Switch to Headphones. The auto-switch feature doesn't work with USB headphones but I believe it will with 'regular' headphone plugs such as you use.
    http://www.rogueamoeba.com/freebies/
    (Oh, did I mention it's free Universal and works with Leopard?)

  • How to improve the load performance while using Datasources for the Invoice

    HI All,
    How to improve the  load performance while using Datasources for the Invoice . Actually my invoice load (Appx. 0.4 M records) is taking very long time nearly ~16 to 18 hrs  to update data from R/3 to 0ASA_DS01.
    If I load through flat file it will load with in ~20 Min for the same amount of data.
    Please suggest how to improve load performance.
    PS: I have done the Inpo package settings as per the OSS note.
    Regads
    Srininivasarao.Namburi.

    Hi Srinivas,
    Please refer to my blog posting [/people/divyesh.jain/blog/2010/07/20/package-size-in-spend-performance-management-extraction|/people/divyesh.jain/blog/2010/07/20/package-size-in-spend-performance-management-extraction] which gives the details about the package size setting for extractors. I am sure that will be helpful in your case.
    Thanks,
    Divyesh
    Edited by: Divyesh Jain on Jul 20, 2010 8:47 PM

  • WinRM cannot process the request. The following error occured while using Kerberos authentication: The network path was not found.

    I have two forests with a transitive on-way trust between them: PROD -> TEST (test trusts PROD). I had previously had kerberos authentication working with winrm from PROD to machines in TEST. I have verified the trust is healthy, I also verified users
    in TEST can use WINRM with kerberos just fine. Users from PROD cannot connect via kerberos to machines in TEST with winrm.
    I have verified the service has registered the appropriate SPNs. I ran dcdiag against all my PROD and TEST domain controllers and didn't find anything that would prevent kerberos from happening. I even tried disabling the firewall entirely on my TEST dcs
    but that didn't gain me anything.
    I've enabled kerberos logging but only see the expected errors such as it couldn't find a PROD SPN for the machine, which it shouldn't from what I understand, it should go to the TEST domain and find the SPN from there.
    I'm really out of next steps before I call PSS and hope someone here has run into this and could provide me some next steps.
    PowerShell Error:
    Connecting to remote server failed with the following error message : WinRM cannot process the request. The following error occured while using Kerberos authentication: The network path was not found.  
     Possible causes are:
      -The user name or password specified are invalid.
      -Kerberos is used when no authentication method and no user name are specified.
      -Kerberos accepts domain user names, but not local user names.
      -The Service Principal Name (SPN) for the remote computer name and port does not exist.
      -The client and remote computers are in different domains and there is no trust between the two domains.
     After checking for the above issues, try the following:
      -Check the Event Viewer for events related to authentication.
      -Change the authentication method; add the destination computer to the WinRM TrustedHosts configuration setting or use HTTPS transport.
     Note that computers in the TrustedHosts list might not be authenticated.
       -For more information about WinRM configuration, run the following command: winrm help config. For more information, see the about_Remote_Troubleshooting Help topic.
        + CategoryInfo          : OpenError: (:) [], PSRemotingTransportException
        + FullyQualifiedErrorId : PSSessionStateBroken
    winrs Error:
    Winrs error:
    WinRM cannot process the request. The following error occured while using Kerberos authentication: The network path was not found.  
     Possible causes are:
      -The user name or password specified are invalid.
      -Kerberos is used when no authentication method and no user name are specified.
      -Kerberos accepts domain user names, but not local user names.
      -The Service Principal Name (SPN) for the remote computer name and port does not exist.
      -The client and remote computers are in different domains and there is no trust between the two domains.
     After checking for the above issues, try the following:
      -Check the Event Viewer for events related to authentication.
      -Change the authentication method; add the destination computer to the WinRM TrustedHosts configuration setting or use HTTPS transport.
     Note that computers in the TrustedHosts list might not be authenticated.
       -For more information about WinRM configuration, run the following command: winrm help config.

    Hi Adam,
    I'm a little unclear about which SPNs you were looking for, in which case could you confirm you were checking that on the computer object belonging to the actual destination host it has the following SPNs registered?
    WSMAN/<NetBIOS name>
    WSMAN/<FQDN>
    If you were actually trying to use WinRM to connect to the remote forest's domain controllers, then what you said makes sense, but I was caught between assuming this was the case or you meant another member server in that remote forest.
    Also, from the client trying to connect to this remote server, are you able to telnet to port 5985? (If you've used something other than the default, try that port)
    If you can't, then you've got something else like a firewall (be that the Windows firewall on the destination or a hardware firewall somewhere in between) blocking you at the port level, or the listener on the remote box just isn't working as expected. I
    just replied to your other winrm post with steps for checking the latter, so I won't repeat myself here.
    If you can telnet to it and the SPNs exist, then you might be up against something called selective authentication which has to do with how the trust was defined. You can have a read of
    this to learn a bit more about selective trusts and whether or not it's affecting you.
    Cheers,
    Lain

  • While using my imac the display just cuts off whats causing this

    while using my imac the display just cuts off but the machine is still on and I have to push the power button a couple of times fir it to cut back on whats causing this?

    Hi keithfromcapitol heights,
    It sounds as if your iMac is going to sleep unexpectedly. Is this during use or after it has been left alone for a while (which can be normal if it is set that way?) If during use, I would suggest that you reset your System Management Controller, using the steps in this article -
    Intel-based Macs: Resetting the System Management Controller (SMC)
    http://support.apple.com/kb/HT3964
    Thanks for using Apple Support Communities.
    Best,
    Brett L

  • How to configure the combobox while using connecting throught the remote URL.

    I am using the combobox in the server for the selection of process stages and is working fine.
    Now I want to connect the combobox through the remote URL connection of my client system. So that it will be updated simultaneously in client and server.
    While connecting through the remote URL it is giving the message the to enter the value property.
    I am not able to understand what value is to be entered in this option.
    Please advise the solution at the earliest.
    Best Regards,
    Naresh Saini

    Dear Poster,
    As no response has been provided to the thread in some time I must assume the issue is resolved, if the question is still valid please create a new thread rephrasing the query and providing as much data as possible to promote response from the community.
    Best Regards,
    SDN SRM Moderation Team

  • Error while using Objects in the plsql

    Hello,
    Need to use UDT inside the UDT in the package.
    The Type objects definitions are :
    CREATE OR REPLACE TYPE SHARE_OUTST_T
    AS OBJECT
    SHR_OUTST_AMT     number
    CREATE OR REPLACE TYPE SECURITY_T
    AS OBJECT
         VOTE_PER_SHR     number
    , CUSIP     varchar2(12)
    , EXCHANGE     varchar2(10)
    , IV_TYPE_CD     varchar2(10)
    , SEC_TICKER_SYMB     varchar2(20)
    CREATE OR REPLACE TYPE ALTERNATE_ID_T
    AS OBJECT
    ( ALT_ID_TYPE     varchar2(20)
    CREATE OR REPLACE TYPE ISSUER_T
    AS OBJECT
    ( ISSUER_ID     varchar2(12)
    CREATE OR REPLACE TYPE ISSUE_VERSION_T
    AS OBJECT
         SHARE_OUTST     SHARE_OUTST_T
    ,     SECURITY     SECURITY_T
    ,     ALTERNATE_ID     ALTERNATE_ID_T
    ,     ISSUER     ISSUER_T
    CREATE OR REPLACE TYPE ISSUE_VERSION_COL_T AS TABLE OF ISSUE_VERSION_T;
    The package definition :
    PROCEDURE get_all_issue_version_col
    ( pv_issue_version_col OUT NOCOPY issue_version_col_t
    AS
    CURSOR cur_issue_version
    IS
    SELECT
    issue_version_t
    so.shr_outst_amt
    , s.vote_per_shr
    , s.sec_cusip
    , s.PRI_MKT_EXCH_CD
    , s.IV_TYPE_CD
    , s.SEC_TICKER_SYMB
    , a.ALT_ID_TYPE
    , i.ISSR_ID
    FROM
    share_outst so
    , security s
    , alternate_id a
    , issuer i
    WHERE
    s.sec_key_id = so.SEC_KEY_ID
    and s.SEC_KEY_ID = a.SEC_KEY_ID
    and s.MSTR_ISSR_KEY_ID = i.ISSR_KEY_ID;
    BEGIN
    OPEN cur_issue_version ;
    FETCH cur_issue_version BULK COLLECT INTO pv_issue_version_col ;
    CLOSE cur_issue_version ;
    END ;
    I get the error :
    PL/SQL : ORA_02315 : Incorrect number of arguements for default constructor.
    Please help.

    Hi solsam,
    change this,
    PROCEDURE get_all_issue_version_col(pv_issue_version_col OUT NOCOPY issue_version_col_t) AS
       CURSOR cur_issue_version Is
         SELECT issue_version_t( SHARE_OUTST_T( so.shr_outst_amt)
                               , SECURITY_T( s.vote_per_shr
                                           , s.sec_cusip
                                           , s.PRI_MKT_EXCH_CD
                                           , s.IV_TYPE_CD
                                           , s.SEC_TICKER_SYMB )
                               , ALTERNATE_ID_T( a.ALT_ID_TYPE )
                               , ISSUER_T( i.ISSR_ID )
                               , ISSUE_MAINT_COMMENT_COL_T( m.im_key_id  --> here the fields of your table
                                                          , m.im_ver_num
                                                          , m.comment_txt
                                                          , m.add_usr_id
                                                          , m.add_tmstmp
                                                          , m.upd_usr_id
                                                          , m.upd_tmstmp
                                                          , m.lock_level_num
                                                          , m.action ))
           FROM share_outst so
              , security s
              , alternate_id a
              , issuer i
              , issue_maint_comment m  --> here your table
           WHERE s.sec_key_id = so.SEC_KEY_ID
             and s.SEC_KEY_ID = a.SEC_KEY_ID
             and s.MSTR_ISSR_KEY_ID = i.ISSR_KEY_ID
             and --> define precidate here
    BEGIN
      OPEN cur_issue_version;
      FETCH cur_issue_version BULK COLLECT
        INTO pv_issue_version_col;
      CLOSE cur_issue_version;
    END;Regards,
    Christian Balz

  • A second browser window will not open and then closing the 1st window firefox will restart. Taskmgr shows it still running, it will not restart until I end the process in taskmgr.

    I open the browser and close it every thing is fine. I open the browser and then attempt to open a second browser window, it will not open. Now because I've attempted to open a second browser window firefox will not restart after closing the open window. Until I've shut it down in the taskmgr. This just started the other day and I have removed the only update I made that was "flash" and I removed the 64 bit version of firefox.

    Win 7 with iTunes installed - I was also having problems with that.
    "netsh winsock reset" at the command prompt resolved all issues and Firefox launched normally.
    Check to see if Winsock is corrupted. May prevent FF from communicating with the web and consequently fails to launch properly - for my situation was not a firewall or antivirus block!
    http://support.microsoft.com/kb/936211#LetMeFixItMyselfAlways
    Click Start, and in Start Search, type cmd.
    Right-click the cmd entry that appears in the search results, and then click Run as administrator. If you are prompted for an administrator password or for a confirmation, type the password, or click Continue.
    At the command prompt, type the following, and then press ENTER:
    netsh winsock reset
    Then, you should see the following message:
    Successfully reset the Winsock Catalog. You must restart the computer in order to complete the reset.
    Restart the computer.
    Note If you receive an “Access Denied” error message instead of the message that is mentioned in step 3, the command prompt was not correctly elevated. In this case, close the Command Prompt window, and repeat steps 1 through 3. Make sure that you correctly implement step 2.

  • When I try to type in pop-up window while using webbased templates, the cursor moves to the location/address bar

    I use web-based templates for formulating replies to email queries of customers. When I click on a template, pop-up windows open for entering all non-general/specific details in the template. With the installation of the new version of Firefox, what happens is that when I try to type in the pop-up window, the cursor automatically moves to the address/location bar ! This was not the case with the old firefox. How do I prevent my cursor to move automatically to the address bar ?

    Hi jaideepdesai,
    Do you have the accessibility type in page option turned on?
    I think it is [http://kb.mozillazine.org/Inline_autocomplete]
    I it is definitely one of these: browser. urlbar.
    See [http://kb.mozillazine.org/Firefox_:_FAQs_:_About:config_Entries About:config entries]
    By default a new window should open the cursor in the search field on the page. Resetting Firefox will get you back to the default on about:support page.

  • Why won't my screen rotate while using iMessage?  The screen lock icon is not on.

    I checked the Control screen and the icon that should be black is.  My screen doesn't rotate.

    Try this:
    Quit all apps: Double tap the Home button and swipe the app preview page up
    and
    Reset: Hold the Sleep/Wake and Home buttons and don’t let go until the screen goes dark and the Apple logo appears (no data will be lost)

  • Overheatin​g of the hp dv6 3049tx while using it on the lap.

    I purchased my hp dv6 3049tx less than a year ago. Since the very first day i noticed the left side of the laptop gets warm. I assume that happens because of the cooling system being on the left. The  problem is that even when the laptop is used on a table or a lap it becomes unbearably hot. I checked with other hp dv6 models and they all have the same issue. I have also heard of cases when the laptops got so hot that they popped open. What can I do about it.I am certainly not keen on cooking my lap.

    Hi,
    I got same problem but i took it lightly.I bought same laptop Aug 2010.
    15 Days back i got booting problem and seen motherboard damaged.I asked customer care they asked for new board which i have to give full price bcus warranty period ended last month.
    If u have waaranty period go service center and change the motherboard imdtly.

  • No record found in the table while using condition for the new added field

    Hi,
    I have added a new field in Z table. There is lots of record in the table. The field which I added have null records. When I am checking the record using the condition new field equal(EQ) to space or blank. This shows no record in the table, but when I execute whole of the table, it shows entries for all field.
    Please suggest. Thanks in Advance.
    Rgds,
    Hemant Maurya

    Hi Suhas,
    Thanks for your quick response.
    Yes I have run SE14 and activate & adjust the database, But problem is same.
    My select query is:
    SELECT VBELN
             PI
             GJAHR
             KUNNR
             GPD
             GPI
    INTO TABLE I_GP_DATA
    FROM ZFI_GP_DISCOUNTS
    WHERE AUGDT BETWEEN ZFI_GP_DISCOUNTS-AUGDT AND ZFI_GP_DISCOUNTS-P_DATE
    AND DOC_NO EQ SPACE.
    Thanks & Regards,
    Hemant Maurya

  • My Mac (10.5.8) has been crashing this week while using Firefox. The Firefox and Thunderbird updates are the only updates I can think of that are recent. Any ideas?

    My whole Mac has crashed a number of times both yesterday and today. This is very unusual. I'm not positive it's because of Firefox's new update, but it seemed like a good guess, and it was usually when I was on various websites (I was going through a lot of emails from news lists and clicking on links). I use Thunderbird for email, and Firefox is my browser of preference. It crashed three times so far today, over several hours, and yesterday I guess it probably crashed about 6 times -- not sure.

    Update Soundflower to the most recent version. You have an unsupported edition. http://code.google.com/p/soundflower/downloads/detail?name=Soundflower-1.6.6b.dm g&can=2&q=

Maybe you are looking for