While using word, the computer started quickly deleting content line by line. What caused it?
What would cause my MacBookPro to start deleting text letter by letter, line by line while in Word? I couldn't use the cursor to stop the deletions.
I can imagine three scenarios.
If using an external mouse, one of the buttons could be stuck.
If using the internal trackpad, is it clicking properly (can also get stuck in a down position)?
Finally, you may have triggered a Sticky Key if you have that feature enabled in System Preferences / Universal Access / Keyboard.
Similar Messages
-
Using Tunein Radio app, while using it, radio stations start repeating/skipping
Using Tunein Radio app, while using it, the broadcast starts repeating the same sentence over and over again. It doesn't matter what radio station I'm listening to it starts skipping. Can it be caused by the wireless internet connection I'm using?
Once you are listening to a program it should bring up another window showing you the radio station, show info, etc. In the upper right hand corner there will be 4 icons, a heart with a plus symbol, an envelope, a target looking icon with a triangle in it, and a triangle with an exclamation point in it. You want the third one, the target with the triangle in it.
This is an iPad right? The icons look different if you are using an iPhone or iPod. -
The computer started using Windows installation media. Remove the installation media and restart your computer so that Windows starts normally. The, insert the installation media and restart the upgrade. (Do not
select |custom[advanced]| to perform an upgrade. |custom[advanced]| installs a new copy of Windows and deletes your programs and settings.)
That is the Compatibility report that I'm getting when trying to install onto parallels 10 Version 10.2.0 (28956) on my mid 2009 Macbook 13. This happens just after I click 'Install now' and accept the T&Cs.
I am selecting 'Upgrade: Install Windows and keep files, setting and applications'.
I am upgrading from the Windows Technical Preview Evaluation Copy. Build 9879.
I have updated my EFI and tried a few restarts and am booting from a CD. No luck yet.
Any help would be muchos appreciated.Hi bitofagiggle,
I am not familiar with mac machines, based on what I know, there should be more settigns that need to be configured before the installation of Windows, I suggest you contact the manufacturer for further help regarding how to make Windows to upgrade smoothly.
The below is some articles for reference:
Install
Windows 8.1 on a Mac
Your Manufacturer website:
How to install Windows using Boot Camp
Please note: Since this website is not hosted by Microsoft, the information may change without notice. Microsoft does not guarantee the accuracy of this information.
Best regards
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected] -
im locked out of my phone i used the wrong pass word the computer that i used to set it up no longer works
Hi ,
I'm sorry you have to put your device in the DFU mode which means that you're gonna lose your data in your phone
Have you upload something in your cloud ?
I'm here if you need more help -
One or more ports used by the Compute Emulator are currently used by other processes
Environment:
VS 2012 Professional
Azure SDK October 2012
Windows 8
I lost the last few days of my life struggling with a weird issue in the emulator. I just ran out of options and I would really appreciate if someone could help me figure out what's wrong.
I am trying to debug a service package from Visual Studio 2012. It's really just about any package -- even the ones generated from a Windows Azure Cloud Service VS template. Any. The VS debugger starts, and in parallel there's "Starting the Windows Azure Debugging
Environment" dialog which shows "Deploying service package to the Windows Azure compute emulator..." message.
The progress bar shown in the dialog gets stuck for a long time (possibly even for an hour or longer!) at some 60% and then the following error message is shown:
"One or more ports used by the Compute Emulator are currently used by other processes. To resolve this, please see MSDN documentation at http://msdn.microsoft.com/en-us/library/hh472164.aspx"
There doesn't seem to be anything else listening on the ports mentioned on the above MSDN page. I did nevertheless try to re-map devfabric and agent ports by specifying different values in the .config files mentioned on the page, but that did not help.
What I also tried and did not help:
- reinstalled SDK, IIS Express, Local DB
- reinstalled VS 2012 (yes, I got that desperate)
- tried using IIS instead
- used SysInternals TcpView to check if there are any conflicts
- rebooted the machine: the deployment works initially (*once*), and the subsequent deployments fail (!)
- tried to kill all Azure-related processes in memory and restart debugging
- tried looking into log files under the user directory (dftmp\...); no errors in *any* log
- tried looking into Event Viewer logs (Azure-related and in general); no errors either
Since the conflict seems to be related to my current network settings, below is my IP
configuration. I am behind a router and I have DHCP activated, but again that should not matter since none of that has changed in the last few years (and the emulator did work until few days ago).
C:\WINDOWS\system32>ipconfig /all
Windows IP Configuration
Host Name . . . . . . . . . . . . : MYCOMPUTER
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Hybrid
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No
Ethernet adapter Ethernet:
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Marvell Yukon 88E8056 PCI-E Gigabit Ethernet Controller
Physical Address. . . . . . . . . : 32-AB-30-66-BC-56
DHCP Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : Yes
IPv6 Address. . . . . . . . . . . : 2a01:e35:8a3a:9970:edd9:b989:b67a:5a8a(Preferred)
Temporary IPv6 Address. . . . . . : 2a01:e35:8a3a:9970:dc7a:4fe6:62a5:e54a(Preferred)
Link-local IPv6 Address . . . . . : fe80::edd9:b989:b67a:5a8a%12(Preferred)
IPv4 Address. . . . . . . . . . . : 192.168.0.1(Preferred)
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Lease Obtained. . . . . . . . . . : Sunday, December 16, 2012 21:26:30 PM
Lease Expires . . . . . . . . . . : Tuesday, December 18, 2012 09:26:14 AM
Default Gateway . . . . . . . . . : fe80::224:d4ff:fea2:9722%12
192.168.0.254
DHCP Server . . . . . . . . . . . : 192.168.0.254
DHCPv6 IAID . . . . . . . . . . . : 253808432
DHCPv6 Client DUID. . . . . . . . : 00-01-00-01-18-1B-EE-4D-20-CF-30-66-BC-46
DNS Servers . . . . . . . . . . . : 192.168.0.254
NetBIOS over Tcpip. . . . . . . . : Enabled
Tunnel adapter isatap.{7A96B710-3107-48B9-A7B2-2F261DDD91AD}:
Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Microsoft ISATAP Adapter
Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes
Tunnel adapter Local Area Connection* 11:
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Teredo Tunneling Pseudo-Interface
Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes
IPv6 Address. . . . . . . . . . . : 2001:0:5ef5:79fb:1caf:12ff:a75c:5668(Preferred)
Link-local IPv6 Address . . . . . : fe80::1caf:12ff:a75c:5668%14(Preferred)
Default Gateway . . . . . . . . . :
NetBIOS over Tcpip. . . . . . . . : Disabled
Below are the Azure SDK emulator configuration files, unmodified (as created by the SDK installation).
DevFC.exe.config
<configuration>
<configSections>
<section name="DevFCSettings" type="System.Configuration.NameValueSectionHandler" />
</configSections>
<!-- The following are options related to the SimulatorSetup -->
<DevFCSettings>
<add key="StartMACAddress" value="00155D201928" />
<add key="EndMACAddress" value="155D20193C" />
<add key="StartIPAddress" value="192.168.0.20" />
<add key="EndIPAddress" value="192.168.0.40" />
<add key="DipPoolStartIPAddress" value="127.255.0.0" />
<add key="DipPoolEndIPAddress" value="127.255.255.255" />
<add key="VipPoolStartIPAddress" value="127.0.0.1" />
<add key="VipPoolEndIPAddress" value="127.0.0.255" />
<add key="DefaultGateway" value="192.168.0.1" />
<add key="SubnetMask" value="255.255.255.0" />
<add key="InternalSwitchName" value="{F3C577E3-8256-4bb9-8F54-256F84E227DE}-DevFabricSwitch" />
<add key="InternalSwitchPortName" value="{F3C577E3-8256-4bb9-8F54-256F84E227DE}-DevFabricHostSwitchPort" />
<add key="InternalEthernetNICName" value="{F3C577E3-8256-4bb9-8F54-256F84E227DE}-DevFabricEthernetNIC" />
<add key="InternalEthernetPortMACAddress" value="00155D201927" />
<add key="InternalEthernetPortIPAddress" value="192.168.0.2" />
<add key="InternalEthernetPortSubnetMask" value="255.255.255.0" />
<add key="StorageRoot" value="DFTemp" />
<add key="LogsDirName" value="DevFCLogs" />
<add key="DynamicPortAllocStart" value="20000" />
<add key="ManagementServicePort" value="15095" />
<add key="RepositoryServicePort" value="15096" />
<add key="AgentCallbackPort" value="15097" />
<add key="AgentPort" value="15098" />
<add key="PxeResponderPort" value="15100" />
</DevFCSettings>
<startup>
<supportedRuntime version="v4.0" sku=".NETFramework,Version=v4.0"/>
</startup>
</configuration>
DFAgent.exe.config
<configuration>
<startup>
<supportedRuntime version="v4.0" sku=".NETFramework,Version=v4.0"/>
</startup>
<appSettings>
<add key="AgentMAC" value="00155D201927"/>
<add key="AgentIP" value="192.168.0.2"/>
<add key="EnableActiveNotification" value="false"/>
<add key="StorageRoot" value="C:\DFTemp"/>
<add key="CopyFilesInStartRole" value="false"/>
<add key="LogsDirName" value="DFAgentLogs" />
<add key="EnableFileLog" value="true" />
<add key="AgentPort" value="15098" />
<add key="RuntimePort" value="15099" />
<add key="AgentCallbackPort" value="15097" />
</appSettings>
</configuration>
DFService.exe.config
<configuration>
<configSections>
<section
name="dfservice"
allowExeDefinition="MachineToLocalUser"
type="Microsoft.ServiceHosting.Tools.DevelopmentFabric.DfServiceConfigurationSection, DfService, Version=1.8.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35"
/>
</configSections>
<dfservice
ManagementServicePort="15095"
RepositoryServicePort="15096"
/>
<startup>
<supportedRuntime version="v4.0" sku=".NETFramework,Version=v4.0"/>
</startup>
</configuration>
Finally, here's what TcpView shows while the emulator is stuck:
devenv.exe 3736 TCP MYCOMPUTER 7240 localhost 15095 SYN_SENT
devenv.exe 3736 TCP MYCOMPUTER 7245 localhost 15095 SYN_SENT
svchost.exe 4332 TCP MYCOMPUTER 7438 MYCOMPUTER 0 LISTENING
System 4 TCP MYCOMPUTER 10000 MYCOMPUTER 0 LISTENING
System 4 TCP MYCOMPUTER 10001 MYCOMPUTER 0 LISTENING
System 4 TCP MYCOMPUTER 10002 MYCOMPUTER 0 LISTENING
DevFC.exe 4380 TCP MYCOMPUTER 15095 MYCOMPUTER 0 LISTENING
DevFC.exe 4380 TCP MYCOMPUTER 15096 MYCOMPUTER 0 LISTENING
DevFC.exe 4380 TCP MYCOMPUTER 15097 MYCOMPUTER 0 LISTENING
DFAgent.exe 14472 TCP MYCOMPUTER 15098 MYCOMPUTER 0 LISTENING
DFAgent.exe 14472 TCPV6 mycomputer 15098 mycomputer 0 LISTENING
DFAgent.exe 14472 TCPV6 mycomputer 15098 mycomputer 6399 ESTABLISHED
System 4 TCP MYCOMPUTER 15099 MYCOMPUTER 0 LISTENING
System 4 TCPV6 mycomputer 15099 mycomputer 0 LISTENING
DevFC.exe 4380 TCP MYCOMPUTER 15100 MYCOMPUTER 0 LISTENING
Thanks in advance for help!
▼
▲
▼
▲Hi,
Unfortunately I already tried all kinds of re-installs (the full list is in my original message). The only one remaining is the reinstall of Windows 8 itself, which I would really like to avoid.
What I find really strange is the time it takes for the above error message to appear. It's like one hour or even more (never measured exactly, I left the computer running).
What kind of a timeout is that? I would expect that, if ports are really used by some other application, I get the message in less than a minute (seconds, actually). To me this looks like the emulator itself for some reason believes there's a problem with
some port while in reality there isn't.
I'll eventually contact Microsoft Support, thanks for the suggestion.
▼
▲ -
Does saving a finished iMovie to Theater duplicate the space used on the computer
Does saving a finished iMovie also to Theater (on iMovie 10) duplicate the space used on the computer (for example if I save the finished movie as a file on my desktop and have it save to Theater (did I just double the space used on my computer: file on desktop plus the file in Theater)?
Is there a way to have itunes delete the WMA file after creating mp3 copy?
No. But after the MP3s are created and you are satisfied that things went OK, just delete the WMAs manually and say "Good Riddance."
You can use an MP3 in multiple players, but you need to turn off any features that automatically change or move files, since one player will change something that messes up the other:
In iTunes, that means go to Edit > Preferences > Advanced and uncheck "Keep..." and "Copy..."
In Windows Media Player, that means go to Tools > Options > Library, and uncheck everything that starts with a verb such as "Rename...," "Rearrange...," etc. -
Hello all.. I hope someone here can help. I recently downloaded some updates to my imac. Since then the computer starts but I get the home screen opening without the logon box. I can't open any programs or files and if I click on the Safari tab it disappears from the dock. I've tried rebooting with no joy.
I contacted technical help at Apple and was told to hold down the ctrl and alt keys with two other keys, I think the S or P keys when powering up. This worked
and the computer seemed fine but now the problem has reappeared. Is there a way to removed downloaded updates from the computer or revert it to an earlier state? Sorry for the long question. Hopefully one of you clever people can help. SimonClntxwhtby wrote:
Hay thank you for your time . I do that every time I know I am online. It says that I am up to date . I have found that I have 10.4.11 version, and that my boot version is 10.6.2, and that my kernel version is 8.11.1.
I have a hard drive icon on my desktop that says 10.6.2....
I use to have iphoto, it doesnt open anymore, it says there is 1.2gigs on that disk.There are many things on here that are the same way. Where do I start?
It's always good to go with one thing at a time and stay focused on that. Let's start with the OS you're running. Click on the Apple menu > About This Mac. What does it say under Mac OS X version ? -
My itunes aacount was on my home computer that me and my brother both used. The computer died and we will need to buy a new one. We thought that if we just logged into our account from my laptop all the music would be there, it's not. Can anyone help us?
Go to the iTunes Store and select "Purchased" from the Quick Links side bar on the right. Go through all the tabs to download again for free
-
Bluetooth no longer loads automatically when the computer starts
I have the Bluetooth Stack version 2.01.21.1. It was working fine. When the laptop booted up, the bluetooth mouse was automatically connected.
All of a sudden the icon no longer appears automatically in the system tray and so I have to manually connect the mouse each time
It is still listed in the startup menu on the desktop and it is still checked in startup in the msconfig.
How do I fix this?
Thanks in advanceI have just gotten off the phone with a microsoft tech who actually seems to have fixed this somewhat
He went to start/run to get to services.msc.
He chose "SSDP Discovery Services" which "enables discovery of
UPnP devices on your home network" and DISABLED it.
Go figure
The BT icon now appears in my system tray and starts up automatically when the computer starts.
I say somewhat because It still disconnects if left idle for a long period, which it did not do previously, but at least it is there when I log on.
I want to mention that I have a Dell, not a Toshiba (did not realize this forum was for Toshiba laptops rather than Toshiba software) but perhaps
you will find this information useful.
Also, at http://technet.microsoft.com/en-us/sysinternals/bb963902.aspx you will find an autorun tool that lets you fix what is or is not
in the startup menus. It seems to work better than using msconfig which on my laptop was not making a difference as to what started up and what did not.
It is meant for IT professionals so I would not mess with it too much. However if you just check or uncheck in the startups for the BT manager you will
not do any damage. -
Pause Video Keyboard Shortcut While Using Word
I am curious if there is a way to pause a video playing on the internet while using word.
I am watching a prerecorded lecture on Safari and taking notes in Word. It is incredibly annoying having to switch back and forth to pause the video so I can copy down what the professor says.
It would be a huge help if I could simply hit "Command or Option Whatever" and simply pause the video without leaving Word. Perhaps modifying the F8 key (a pause button that tries to open iTunes when I hit it)?
I really appreciate any help the community can lend. Thank you in advance.
-Graham-I think the problem here is focus. The default keystroke for iTunes to play/pause will not be captured by the application unless you have the focus on iTunes.
I have no idea how you are used to working, but if you are just taking some notes at first, can you not resize Word and place it next to the video playback window? Or perhaps if Word resizing is too difficult, use a smaller text editor to do the same, than cut and paste into your word document, post-note taking, to format, etc?
Other than that, I don't know how to make custom shortcuts/key-assignments to create a work-around. Sorry. -
Hello Everyone,
This is my first time using the forum. My macbook battery will not charge. I have tried unplugging and doing an SMC reset but it did not seem to change. I have yet to try another magsafe charger. The charger has a dim green light while plugged into the computer. What should my next steps be, besides trying a new charger as well as being the most cost effective?
Thanks
-TBHi ..
The battery may need replacing.
Check the battery maximum cycle count > Mac notebooks: Determining battery cycle count
And check the adapter > Apple Portables: Troubleshooting MagSafe adapters -
Hi All,
I am facing below mentioned error while using '*'in the NTE (EDI 850) Segment where '*' is also used as Data Element
Error: 1 (Field level error)
SegmentID: NTE
Position in TS: 70
Data Element ID: NTE02
Position in Segment: 2
Data Value:
3: Too many data elements
For Eg: NTE*GEN*My Text *goes here
Here, NTE02 should be My Text *goes here. So, how can I use "*" here without changing anything in the EDI message?
Can it be done?
Thanks.Sorry, no.
X12 does not support an escape character so whatever is used for delimiters become reserved characters.
If you want to allow '*' in the data, you will have to chooser a different Element delimiter. The receiver should read the from this from the ISA Segment so it's supposed to be dynamic but that's not always the case in practice. -
I have registered Adobe CS, and every two/three weeks i get a message that I am using a trial version. I provide my registration key, and the fun starts over in two/three weeks. What is going on?
I'm not sure what's happening. See if you can get some help from Web Chat here:
Serial number and activation support -
How do you set a default theme(in this case, the theme is HiFi) so each time the computer starts, you do not to have to constantly change it??
for some reason the function never get's called. I have this
MyComboBox.dropdown.addEventListener(ToolTipEvent.TOOL_TIP_SHOW,
myListener);
and ive tried this:
MyComboBox.addEventListener(ToolTipEvent.TOOL_TIP_SHOW,
myListener);
private function myListener (e:ToolTipEvent) : void {
trace("e: " + e.target);
trace("e: " + e.toolTip);
Any more ideas? -
I have suddenly started getting "A Bluetooth Serial Failure Has Occurred" message suggesting the computer failed to open an RFCOMM serial channel: what do I do? This "opens" multiple times: three or four 'tiles.' It seems like the computer is looking for something, but can't find it. I'm not sure why this would start all of a sudden, but it concerns me. What should I do or what should I look for? Are there settings that need to be changed?
I have suddenly started getting "A Bluetooth Serial Failure Has Occurred" message suggesting the computer failed to open an RFCOMM serial channel: what do I do? This "opens" multiple times: three or four 'tiles.' It seems like the computer is looking for something, but can't find it. I'm not sure why this would start all of a sudden, but it concerns me. What should I do or what should I look for? Are there settings that need to be changed?
Maybe you are looking for
-
I just bought a new MSI kt3 ultra-aru from newegg and a new athlon xp 1900+(1.6ghz) and i unlocked it but the board wont boot with the new multiplier, so i thought the proc was not unlock so i try my old tbird which has already been unlocked and it d
-
Can't import tracks from an older version of iTunes
Since my rMBP has no optical drive I've found a practical use for my old G3 iMac which is for ripping CDs. The G3 of course is only running iTunes 7.6 (the newest version available for G3 Macs) whereas my MBP is running the latest version. I've share
-
Best Practice for BEX Query "PUBLISH to ROLE"?
Hello. We are trying to determine the best practice for publishing BEX queries/views/workbooks to ROLEs. To be clear of the process I am referring: from the BEX Query Designer, there is an option QUERY>PUBLISH>TO ROLE. This function updates the use
-
Q: Can Spotlight be configured to default to search for the comments field?
Can the Spotlight search box be configured to search only for Comments in Get Info as the default? I know that I can add a line to the search parameters that will search there. But, I'm most interested in searching for tags than for words throughout
-
Hello Experts, Is there a standard SAP report for "Aged Material"? Please let me know. Your help is greatly appreciated. Thanks.