While video taping, the camera says videoing stopped automatically.

I purchased my canon rebel t2i at Staples, along with a 16GB card with a 10 in the top rt corner. When recording with my camera, it will often say videoing has stopped automatically. I also cleared everything off the card . I had it checked today by an employee, but was not sure why that message displays. He suggested to shut it off and start it up again as it maybe a glitch. I love this camera, but I need to know why the camera is doing this. Very frustrating when i am trying to get those special moments with our grandaughter, as they are only here for a short time. I am very new to this higher classed camera.
Thankyou. I hope you can steer me in the right direction!!

One more thing - sometimes with Canons simply deleting everything doesn't actually clear the space on the card. You might want to try formatting it as well.

Similar Messages

My iphone 4 only turns on when its plugged into a wall and when it finally turns on it lasts for about a minute then it turns off and while its on the signal says searching, what should i do?

my iphone 4 only turns on when its plugged into a wall and when it finally turns on it lasts for about a minute then it turns off and while its on the signal says searching, what should i do?

Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem. You likely have a bad battery.
Apple Retail Store - Genius Bar
Apple will exchange your iPod for a refurbished one with a new battery for $79. They do not fix yours.
Apple - iPod Repair price
A third-party place like the following will replace yur battery for less. Google for more.
iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens
Replace the battery yourself if you are up to it. A replacement costs about $10
iPod Touch Repair – iFixit

Videos stopping automatically.

Hi guys,
When I'm playing some video in my ipod nano 3rd generation something strange happens and the video stops automatically.
For example, I was watching a "Two and a Half Men" TV show and in 2 minutes and 25 seconds it stopped. I played again after the 2m27s and continue normally until 5 minutes and stopped again. It happened five times in entire video.
I already tried others videos and it happens in all of them, in different period of times.
Any suggestions?
Cheers,
John

Updated: Nobody had this problem before?
Thanks again,
John

IPod locked up while connected to the computer, "saying do not disconnect"

iPod locked up while connected to the computer saying "Do Not Disconnect"

Is it red? If so, then it's supposed to happen. As far as I know, there's no way around it.

HT4101 The camera connector suddenly stopped importing photos like it used to. Now it will import 1 or 2 photos and then **** off and revert to the desk top. The Sd reader works, but I miss the quicker option of the cord and connected.

I have two Canon Elph cameras. They both were easy to use with my IPad until two months ago when it suddenly stopped working on either camera/cord. It would check the new photos displayed on the screen and then shut down, import one or two, and go back to the desktop. Frustrating. The SD reader works, though. Is the camera connected faulty?

Are you running a Managed or a Referenced Library?
A Managed Library, is the default setting, and iPhoto copies files into the iPhoto Library when Importing. The files are then stored in the Library package
A Referenced Library is when iPhoto is NOT copying the files into the iPhoto Library when importing because you made a change at iPhoto -> Preferences -> Advanced. (You unchecked the option to copy files into the Library on import) The files are then stored where ever you put them and not in the Library package. In this scenario you are responsible for the File Management.

Battery is fully charged but the camera says it is not

The battery is fully charged but the camera low battery icon flashes as soon as it is turned on. I know the battery is good because when I place it into my other Mavica camera it shows a fully charged battery. What can I do?

Toni,
Based on the information, it seems that there is an issue with the Camera software. If the battery model that you’re using is the one suggested by the Camera, then you need to send the Camera for service.
You can initiate service request from the below page:
https://eservice.sony.com/webrma/web/index.do

Canon Rebel 3ti EOS 600D and the video stops automatically

The Video automatically stops recording after a few seconds. I have a PNY Performance 16 GB 3.5hr HD VIdeo it also says 4 with a circle around it and I don't know if that means Class 4 or not ? I just got this camera a week ago. Can you please help ?.
Denise

Good luck! Incidentally, Canon does not specifically recommend a brand... but the SanDisk and Lexar brands seem to be the best (and even within these they have a variety of performance specs.) e.g. "SanDisk Extreme" or "SanDisk Extreme Pro", etc.
I do see enough posts from people who have cards which are supposed to be fast enough... but sitll give them problems. But the problems tend to go away when they buy a high quality brand. For this reason, I tend to not mess around with budget cards -- sometimes saving a few bucks just isn't worth the grief.
Glad you are liking your new camera!
Tim Campbell
5D II, 5D III, 60Da

Will we ever be able to play music while recording in the camera app?

I am always wanting to record a video and play music while doing it but I can't. I have to get another device to play music but hat doesn't sound very clear. Please add this feature.

Apple is not here
This is a user to user forum
We can't do anything about your suggestion
To tell Apple, post at http://www.apple.com/feedback/ipad.html
Allan

HT201229 I received an unsolicited message from a phone number which I now learn is a trap. I deleted the message and the second copy of the same without replying - there is a suggestion that you ca stop it by replying STOP but messages on the web say thi

Hello
I received an unsolicited message from a phone number. I deleted it.
A second copy arrived and I deleted that too.
The message says send STOP as a reply and it will be stopped but the web says this is a way to give the sender access to your account and they will charge you £3 every time.
Did i do right to delete it?
How can I block a number? The system on my iPhone iiOS 8 and Mac Yosemite will not allow it.
How can I change my status (as I do on Skype) to stop these messages safely?
Anythoughts?
"Applemany"

Why not using ASP?
If on your webpage you have some buttons that runs at server, the server can create a web Client and using your IP address retrieved from the cession, communicate with your application (that will act as web Server).
then the web client on the web server can send request to your VB application and read a stream as response.
This web client being control by the buttons on the web page, gives you complete control over what and when the data is sent
This way you will have a complete control over the VB application from the web page.
I am not saying that the way you want to do it cannot work, ... but it seems more complicated

To get started , connect the camera

I purchased a hp pavillion laptop on 15 august 2014 . but it started giving problems such as slow speed and not enough performance which was promised . so basically i bought this laptop for video conferencing purpose but i started gettting a problem , the camera suddenly stopped working for a while . everytime when i strted my video conferencing the camera would suddenly stop n not work again , even the stock camera application didn't work. I went to the my hp service center but no satisfactory help was given .they asked me to buy the recovery disk , by calling at some toll free number 1800112267, although my laptop is in warranty . I feel very much harassed and frustrated. Kindly help me to overcome this problem

hi BassamMord,
Welcome to the Lenovo Forums.
It's possible that driver for the camera is not installed -- causing the Windows Camera app and Skype to show the camera error.
Can you try to:
1. Install the Integrated Camera Driver (reboot the system if necessary).
2. When finished, navigate to the Device Manager and look an item called imaging Devices -this will show and verify if the camera device is successfully instaled on the system.
If the camera is successfully detected, try opening Skype or the Windws Camera App. and observe.
Regards
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

After photos are downloaded to MacBook from mini iPad, if they are removed form the camera will they also be removed from Photos also?

After photos are downloaded from iPad Camera, if they are deleted from the camera, will they be automatically deleted from the iPad Photos?

Yes, both Photos and Camera use the same data in Camera Roll.

Quick camera button sets the camera in automatic settings.

Hi,
A friend is having troubles with his Z3 :
He used to take pictures with the quick camera launch button, but since a recent camera or system update, when he use this button, the camera is set to automatic mode instead of manual, with poor resolution and quality settings. If he launches the camera with the standard button from the phone menu, everything is fine and perfectly set up.
When the camera is used from the quick button and set back to the correct quality settings and manual mode, after closing it, it goes back to auto mode with bad settings. Same thing when he slides the camera icon from the locked screen. The only way to get the proper settings when launching the camera is to use the icon from the phone's menu.
He tried a lot of thigs, from uninstalling the camera updtades to searching everywhere on the internet, there is no informations or messages about this problem.
Where is this problem coming from ? The quick button is unusable since that update, it's a shame !
Thanks in advance !

Well not really, I had it too and we are 100% sure that the quick camera button starts the camera in it's deffault settings since a recunt update.
What would be the point anyway of a button like this if the camera isn't usable ?! The aspect ratio is even set to 16:9 in 8mpx instead of 4:3 12mpx…
My friend is so used to launch the camera with that button that now he keeps using it by "error" and take photos that are not proper to use later…
I'm personally using a nexus 5 and had some bad changes after some automatic updates too, but this one on the Z3 simply kill one of it's most useful feature, and since almost nobody is talking about it I'm afraid that it will stay like this forever.

Debugging mode stopped automatically when using xml file load

Dear Sir,
I am trying to develop a new add-on using xml files for creating new forms. In fact I was using the sample code delivered with the SDK ( WorkingWithXml - under VB.NET). The Problem is that when I am in the debuging mode and after the form load. the application goes out of the debugging mode and stop action.
In fact what i was trying to do first is to create a new menu and then when i click on this menu a new form appear but once the menu is loaded the application stop the debugging mode automatically.
Can somebody clarify to me what I am doing wrong and why the debugging mode is stopped automatically, noting that i am still in the add-on developpement phase.
As i mentioned above i used the WorkingWithXml sample code (VB.NET) and i have adjusted in a way to load menu and then on the menu click i load my form.
Please advice
Best Regards

Hi Mary,
Put your code between in a Try Catch block. In the Catch part use the following:
oApplication.MessageBox("CompError: " & oCompany.GetLastErrorCode.ToString & ", " & oCompany.GetLastErrorDescription & vbCrLf & "Message: " & ex.Message)
This should give you a clearer idea of what the error is all about.
The most likely reason is that there is something wrong with your XML file.
Regards,
Vítor Vieira

When i take photos or videos on my ipod touch with the camera, then i plug it into the computer to sync, the computer shuts down and this blue screen comes up saying "an error has occured" and a heap of other stuff.

When i take a photo or a video using the camera on my ipod touch, the computer (windows xp) shuts down and a blue screen comes up saying "an error has occured" and a heap of oth stuff in white. It doesn't wipe the memory or anything off the ipod. Whenever i sync my ipod without photos or videos it works fine. It also doesn't mind me taking photos off itunes to put on the ipod. I have had a look around and a couple of people say reinstall itunes, but i don't know if i will lose all my songs and apps. Any suggestions of help?

Removing all Apple related software and reinstalling iTunes should bring all needed drivers back: Removing iTunes, QuickTime, and other software components for Windows XP
Also check for new driver updates for Windows, especially if you have a webcam installed.
iTunes Store purchases or songs imported from CDs are saved in your My Music folder by default and are not deleted by removing iTunes. While it is highly unlikely that you will lose any contents of your iTunes Library when following these steps, it is always a good idea to ensure that your iTunes library is backed up. If you're unsure how to backup, see iTunes: Back up your iTunes library by copying to an external hard drive.
copied from the article about reinstalling iTunes

HT203200 My purchased music video stopped while downloading, it says error (-1450). Can anyone help?

I purchased a video, it keeps stopping while it's downloading, it says an error occured (-1450) does anyone know what I can do?, or what this means, I downloaded this 2x's

If you cannot sucessfully restore your iPod, see if this following post helps your situation -> A possible solution for errors 1417 and 1418
-Kylene
If any post helps or solves your issue, please mark it that way accordingly. Thank you for helping the boards!

While video taping, the camera says videoing stopped automatically.

Similar Messages

Maybe you are looking for