While waiting for the rental interface - how to view rental on Apple TV?

There are supposed to be two ways to watch rental movies on an Apple TV: the rent directly from the Apple TV that isn't yet available at time of posting, and the "Move" feature. I can't get this to work - it doesn't appear at all. It shows up fine if I wanted to move it to my iPod Classic, but not the Apple TV. I am streaming content from iTunes to the AppleTV. Anyone know how to do this? On the support page it indicates that it should work just like with the iPod. ??

This will be the third thread I've mentioned this on... and I will mention it again here since no one pays attention before making purchases:
You are responsible as the buyer for understanding the product, it's capabilities and limitations, before buying.
While I can understand your frustration when reading the FAQ, it has been made very very abundantly clear to the most common of person that it requires a SOFTWARE UPDATE... do you recall updating your software on your AppleTV? Did you bother to investigate whether you had the update? At any point did it occur to you that this might not work? If so, I'm sorry, maybe you're not capable of handling this sort of technology without the knowledge necessary to comprehend what's required.
Also, since you're so upset about that you need to use language that is inappropriate, why don't you not post on a technical forum about your anger issues and instead give feedback to apple by reporting a problem in your purchase history and let them know. They have a 100% satisfaction rate with me over many years, I'm sure they will be happy to accommodate you as well provided you can be a little bit more polite to them.
Wow. It's amazing what collective ignorance does to people.

Similar Messages

Time out while waiting for the managed process to start

Hi All,
Im getting the below error,when i try to start all managed processes.
Its taking too much time to execute "opmnctl startall "command and it will give the below error.
opmnctl: starting opmn and all managed processes...
================================================================================
opmn id=inkolv1lp01:6201
0 of 3 processes started.
ias-instance id=retek101202.inkolv1lp01
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
ias-component/process-type/process-set:
HTTP_Server/HTTP_Server/HTTP_Server
Error
--> Process (pid=401608)
time out while waiting for a managed process to start
Log:
/retek/product/app_server/101202/OracleFRM_13/opmn/logs/HTTP_Server~1
ias-component/process-type/process-set:
WebCache/WebCache/WebCache
Error
--> Process (pid=319598)
time out while waiting for a managed process to start
Log:
/retek/product/app_server/101202/OracleFRM_13/opmn/logs/WebCache~WebCache~1
ias-component/process-type/process-set:
WebCache/WebCacheAdmin/WebCacheAdmin
Error
--> Process (pid=397550)
time out while waiting for a managed process to start
Log:
/retek/product/app_server/101202/OracleFRM_13/opmn/logs/WebCache~WebCacheAdmin~1
Im in between some work ,please help to resolve the isue

Hi,
I checked the log files and i think it has some errors.I dint get exactly what does it mean.
Web Cache ($ORACLE_HOME/webcache/logs :
- event_log contains
[18/Apr/2012:11:16:26 -0500] [notification 9612] [ecid: -] OracleAS Web Cache 10g (10.1.2), Build 10.1.2.0.2 050802
[18/Apr/2012:11:16:26 -0500] [notification 9403] [ecid: -] Maximum number of file/socket descriptors set to 900.
[18/Apr/2012:11:16:26 -0500] [notification 9612] [ecid: -] OracleAS Web Cache 10g (10.1.2), Build 10.1.2.0.2 050802
[18/Apr/2012:11:16:26 -0500] [notification 9403] [ecid: -] Maximum number of file/socket descriptors set to 900.
[18/Apr/2012:11:16:31 -0500] [notification 13002] [ecid: -] Maximum allowed incoming connections are 700
[18/Apr/2012:11:16:31 -0500] [notification 13002] [ecid: -] Maximum allowed incoming connections are 700
[18/Apr/2012:11:17:01 -0500] [warning 11917] [ecid: -] SSL wallet Origin Server Wallet file /etc/ORACLE/WALLETS/oret13/ewallet.p12 does not exist.
[18/Apr/2012:11:17:01 -0500] [warning 11917] [ecid: -] SSL wallet Origin Server Wallet file /etc/ORACLE/WALLETS/oret13/ewallet.der does not exist.
[18/Apr/2012:11:17:01 -0500] [warning 11919] [ecid: -] The SSL wallet autologin file /etc/ORACLE/WALLETS/oret13/cwallet.sso does not exist. Wallet does not appear to be
autologin wallet.
[18/Apr/2012:11:17:01 -0500] [warning 11921] [ecid: -] The origin server wallet did not open. Operating without wallet for backend. Only Diffie-Hellman anonymous connec
tions supported to origin servers.
[18/Apr/2012:11:17:01 -0500] [warning 11922] [ecid: -] Origin Server Wallet wallet fails to open at location /etc/ORACLE/WALLETS/oret13, NZE-28759, as user oret13
[18/Apr/2012:11:17:01 -0500] [warning 11917] [ecid: -] SSL wallet Origin Server Wallet file /etc/ORACLE/WALLETS/oret13/ewallet.p12 does not exist.
[18/Apr/2012:11:17:01 -0500] [warning 11917] [ecid: -] SSL wallet Origin Server Wallet file /etc/ORACLE/WALLETS/oret13/ewallet.der does not exist.
[18/Apr/2012:11:17:01 -0500] [warning 11919] [ecid: -] The SSL wallet autologin file /etc/ORACLE/WALLETS/oret13/cwallet.sso does not exist. Wallet does not appear to be
autologin wallet.
2)Oracle HTTP Server ($ORACLE_HOME/Apache/Apache/logs has these details
access_log.1307016000 mod_oc4j.753776.shm.sem
access_log.1307059200 mod_oc4j.815188.shm.mem
access_log.1307102400 mod_oc4j.815188.shm.sem
access_log.1307145600 mod_oc4j.843922.shm.mem
access_log.1307361600 mod_oc4j.843922.shm.sem
access_log.1307404800 mod_oc4j.872618.shm.mem
access_log.1307448000 mod_oc4j.872618.shm.sem
access_log.1307491200 mod_oc4j.872692.shm.mem
access_log.1307534400 mod_oc4j.872692.shm.sem
access_log.1307577600 oracle

I lost my iTunes acc. I had a 3GS disabled. I did a restore that was demonstrated on YouTube. While waiting for it to reboot, note; the 3GS was not active. I did an upgrade to the 4g. While waiting for the phone to reboot; I did a update on my 4g thru wif

Have I lost the account I had with my 3GS?
I have not synced the 4g to iTunes. After unlocking my disabled 3GS; when I hit the restore opp. and everything opened up. There was nothing in the account. Can I and how do I get back my info. or the account I had backed up with my 3GS. And does the phone have to be active?

I did but that was from a month before, I want pics I took after that backup time. It deleted without my consent like this is not cool. I had recent pics from my trip.

Tryout of *current* version while waiting for CS3?

I'm an InDesign and Illustrator user who may be
picking up Dreamweaver (either individually or as part of one of
the new suites) when CS3 comes out. I'd like to try learning it at
home before I have to use it at work. I notice there's no Tryout
version, and that the Dreamweaver web site says that a Tryout
version will be available 6-8 weeks after CS3 is released.
Is there any way to get a hold of the
current version as a Tryout? That way I could learn how to
use it while waiting for the new version to arrive.
Thanks.

No. But I'll whip one up for you....
Always use document relative links unless you have a good
reason not to.
GOOD REASONS
1. Document relative links don't work
2. You are using include files that link to pages at a
variety of folder
locations in the site
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"DC_Eric" <[email protected]> wrote in message
news:[email protected]...
>
quote:
Originally posted by:
Newsgroup User
> > #included file is in a subdirectory but the files
that #include it
> > aren't,
> > so
> > the relative locations are off.
>
> Always use root relative links for things like this.
>
> Murray do you know of a post or have a reference when
one should use links
> relative to the site root vs relative to the document?
>
>
> --
> Murray --- ICQ 71997575
> Adobe Community Expert
> (If you *MUST* email me, don't LAUGH when you do so!)
> ==================
>
http://www.dreamweavermx-templates.com
- Template Triage!
>
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
>
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
>
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
> ==================
>
>
> "lom2" <[email protected]> wrote in
message
> news:[email protected]...
> > Thanks for everyone's replies. Yes I contacted
customer service and they
> > gave
> > me the link that DC_Eric provided. I'm playing with
Dreamweaver now.
> >
> > Good advice about learning the theory before the
tool, but I've done web
> > development before. I'm not a total noob. :-)
> >
> > Version 8 seems pretty slick. The only problem I'm
having is that the
> > Link
> > Checker thingy is screwing things up with a PHP
#include file because
> > the
> > #included file is in a subdirectory but the files
that #include it
> > aren't,
> > so
> > the relative locations are off.
> >
> > But I suppose I just need to read the manual. LOL.
> >
> > Thanks again.
> >
>
>
>
>
>
>

Ok so I have an iPod touch 4 and I want to get an iPad but don't know if I should get the iPad 2 or wait for the new one. I am 14 years

iPad 2

Well, it depends how long you can wait. We can't discuss rumors on here about release dates.
Look at what you actually need though and decide how soon you need something.
What you'll want to realize is that every year or two something new will come out.. so you have to learn to fight off the "I need the new one" bug if you want to be satisfied with your purchase. At your age you probably won't get the opportunity to upgrade for a while, so you'll have to learn to live with your purchase decision longer.
If the iPad 2 in it's current state does everything you want, and you enjoy playing around on it a lot, I'd get it now and be happy. If you feel like you want the newest of the new and are willing to wait (in line and for it to release) then you should wait for the next release.
The iPad 2s are finally becoming available after many months backlog, so keep in mind the next release will likely be the same way and think if you could really wait that long to get something.
Alternatively you could also consider getting a used iPad 1, then use that while waiting for the next version. The used one could then be resold for a fair amount once the new one comes out. Apple products tend to have a pretty good resale value, and the iPads are extraordinarily popular.

Unhandled Exception: System.TimeoutException: The request channel timed out while waiting for a reply after 00:01:59.9139778.Increase the timeout value passed to the call to Request or increase the SendTimeout value on the Binding.

Hi,
I created a simple plugin and since i wanted to use Early Binding i added Xrm.cs file to my solution.After i tried registering the plugin (using the Plugin Registration Tool) the plugin does not gets registered and i get the below mentioned Exception.
Unhandled Exception: System.TimeoutException: The request channel timed out while waiting for a reply after 00:01:59.9139778. Increase the timeout value passed to the call to Request or increase the SendTimeout value on the Binding. The time allotted to this
operation may have been a portion of a longer timeout.
Server stack trace:
at System.ServiceModel.Channels.RequestChannel.Request(Message message, TimeSpan timeout)
at System.ServiceModel.Channels.SecurityChannelFactory`1.SecurityRequestChannel.Request(Message message, TimeSpan timeout)
at System.ServiceModel.Channels.ServiceChannel.Call(String action, Boolean oneway, ProxyOperationRuntime operation, Object[] ins, Object[] outs, TimeSpan timeout)
at System.ServiceModel.Channels.ServiceChannelProxy.InvokeService(IMethodCallMessage methodCall, ProxyOperationRuntime operation)
at System.ServiceModel.Channels.ServiceChannelProxy.Invoke(IMessage message)
Exception rethrown at [0]:
at System.Runtime.Remoting.Proxies.RealProxy.HandleReturnMessage(IMessage reqMsg, IMessage retMsg)
at System.Runtime.Remoting.Proxies.RealProxy.PrivateInvoke(MessageData& msgData, Int32 type)
at Microsoft.Xrm.Sdk.IOrganizationService.Update(Entity entity)
at Microsoft.Xrm.Sdk.Client.OrganizationServiceProxy.UpdateCore(Entity entity)
at Microsoft.Crm.Tools.PluginRegistration.RegistrationHelper.UpdateAssembly(CrmOrganization org, String pathToAssembly, CrmPluginAssembly assembly, PluginType[] type)
at Microsoft.Crm.Tools.PluginRegistration.PluginRegistrationForm.btnRegister_Click(Object sender, EventArgs e)
Inner Exception: System.TimeoutException: The HTTP request to 'https://demoorg172.api.crm.dynamics.com/XRMServices/2011/Organization.svc' has exceeded the allotted timeout of 00:01:59.9430000. The time allotted to this operation may have been a portion of a
longer timeout.
at System.ServiceModel.Channels.HttpChannelUtilities.ProcessGetResponseWebException(WebException webException, HttpWebRequest request, HttpAbortReason abortReason)
at System.ServiceModel.Channels.HttpChannelFactory`1.HttpRequestChannel.HttpChannelRequest.WaitForReply(TimeSpan timeout)
at System.ServiceModel.Channels.RequestChannel.Request(Message message, TimeSpan timeout)
Inner Exception: System.Net.WebException: The operation has timed out
at System.Net.HttpWebRequest.GetResponse()
at System.ServiceModel.Channels.HttpChannelFactory`1.HttpRequestChannel.HttpChannelRequest.WaitForReply(TimeSpan timeout)
And to my Surprise after i remove the Xrm.cs file from my solution the Plugin got registered!
Not understanding what exactly is the issue.
Any Suggestions are highly appreciated.
Thanks,
Shradha


Hello Shardha,
I really appreciate that you have faced this issue.This is really very strange issue and basically it occurs because of big size of your early bound class and slow internet
connection.
I would strictly recommend you to reduce the file size of your early bound class and then register.By default early bound class is created for all the entities which are
present in CRM(System entities as well custom entities).Such kind of early bound classes takes lots of time to register on server and hence timeout exception comes.
There is some standard define to reduce the size of early bound class.Please follow the link to get rid from big size of early bound class.
Create a new C# class library project in Visual Studio called SvcUtilFilter.
In the project, add references to the following:
CrmSvcUtil.exe(from sdk) This exe has the interface we will implement.
Microsoft.Xrm.Sdk.dll (found in the CRM SDK).
System.Runtime.Serialization.
Add the following class to the project:
using System;
using System.Collections.Generic;
using System.Xml.Linq;
using Microsoft.Crm.Services.Utility;
using Microsoft.Xrm.Sdk.Metadata;
namespace SvcUtilFilter
    /// <summary>
    /// CodeWriterFilter for CrmSvcUtil that reads list of entities from an xml file to
    /// determine whether or not the entity class should be generated.
    /// </summary>
    public class CodeWriterFilter : ICodeWriterFilterService
        //list of entity names to generate classes for.
        private HashSet<string> _validEntities = new HashSet<string>();
        //reference to the default service.
        private ICodeWriterFilterService _defaultService = null;
        /// <summary>
        /// constructor
        /// </summary>
        /// <param name="defaultService">default
implementation</param>
        public CodeWriterFilter( ICodeWriterFilterService defaultService )
            this._defaultService = defaultService;
            LoadFilterData();
        /// <summary>
        /// loads the entity filter data from the filter.xml file
        /// </summary>
        private void LoadFilterData()
            XElement xml = XElement.Load("filter.xml");
            XElement entitiesElement = xml.Element("entities");
            foreach (XElement entityElement in entitiesElement.Elements("entity"))
                _validEntities.Add(entityElement.Value.ToLowerInvariant());
        /// <summary>
        /// /Use filter entity list to determine if the entity class should be generated.
        /// </summary>
        public bool GenerateEntity(EntityMetadata entityMetadata, IServiceProvider services)
            return (_validEntities.Contains(entityMetadata.LogicalName.ToLowerInvariant()));
        //All other methods just use default implementation:
       public bool GenerateAttribute(AttributeMetadata attributeMetadata, IServiceProvider services)
            return _defaultService.GenerateAttribute(attributeMetadata, services);
        public bool GenerateOption(OptionMetadata optionMetadata, IServiceProvider services)
            return _defaultService.GenerateOption(optionMetadata, services);
        public bool GenerateOptionSet(OptionSetMetadataBase optionSetMetadata, IServiceProvider services)
            return _defaultService.GenerateOptionSet(optionSetMetadata, services);
        public bool GenerateRelationship(RelationshipMetadataBase relationshipMetadata, EntityMetadata otherEntityMetadata, IServiceProviderservices)
            return _defaultService.GenerateRelationship(relationshipMetadata, otherEntityMetadata, services);
        public bool GenerateServiceContext(IServiceProvider services)
            return _defaultService.GenerateServiceContext(services);
This class implements the ICodeWriterFilterService interface. This interface is used by the class generation
utility to determine which entities, attrributes, etc. should actually be generated. The interface is very simple and just has seven methods that are passed metadata info and return a boolean indicating whether or not the metadata should be included
in the generated code file.
For now I just want to be able to determine which entities are generated, so in the constructor I read from an XML
file (filter.xml) that holds the list of entities to generate and put the list in a Hashset. The format of the xml is this:
<filter>
<entities>
    <entity>systemuser</entity>
    <entity>team</entity>
    <entity>role</entity>
    <entity>businessunit</entity>
</entities>
</filter>
Take a look at the methods in the class. In the GenerateEntity method, we can simply check the EntityMetadata parameter
against our list of valid entities and return true if it's an entity that we want to generate.
For all of the other methods we want to just do whatever the default implementation of the utility is. Notice
how the constructor of the class accepts a defaultService parameter. We can just save a reference to this default service and use it whenever we want to stick with the default behavior. All of the other methods in the class just call the default
service.
To use our extension when running the utility, we just have to make sure the compiled DLL and the filter.xml file
are in the same folder as CrmSvcUtil.exe, and set the /codewriterfilter command-line argument when running the utility (as described in the SDK):
crmsvcutil.exe /url:http://<server>/<org>/XrmServices/2011/Organization.svc /out:sdk.cs /namespace:<namespace> /codewriterfilter:SvcUtilFilter.CodeWriterFilter,SvcUtilFilter
/username:[email protected] /password:xxxx
That's it! You now have a generated sdk.cs file that is only a few hundred kilobytes instead of 5MB.
One final note: There is actually a lot more you can do with extensions to the code generation utility.
For example: if you return true in the GenerateOptionSet method, it will actually generated Enums for each CRM picklist (which it doesn't normally do by default).
Also, the source code for this SvcUtilFilter example can be found here.
Use at your own risk, no warranties, etc. etc.
Please mark as a answer if this post is useful to you.

How do you keep a VI running while waiting for user input?

I have a VI that:
1. The user enters set points.
2. The user starts the VI and the VI sends the set points to an external process via a serial interface.
3. The VI stops running.
4 The user waits for the external process to complete.
5. Repeat sequence. Go to Step 1.
This works well except for one small problem. Starting the VI in step 2 causes an external micro controller to reset. During the reset it will ignore set point commands. To get around this problem a delay has been added between when the VI opens the serial port and when the VI sends the set points to the external process Is it possible to keep a VI running continuously in this type of application, thereby eliminating the start up and shut down of the serial interface?
If yes, how do you keep a VI running while waiting for user input?
Howard

The ones for the event structure specifically. I'm posting from my phone. Look at the basic ones for user input. even a simple while loop with a boolean and a case statement would work.

RDS 2012 R2: A timeout (30000 milliseconds) was reached while waiting for a transaction response from the (name-of-service) service

Hi guys,
On a random base (daily, weekly) we're experiencing major log-in problems on our Windows Server 2012 R2 Remote Desktop Services farm. The VM's are hosted on Hyper-V 2008 hosts and we're not using Citrix techniques etc.
Users are reporting that they cannot log-in, the log-in sessions hangs with a blank screen when loading their user profile (e.g. Please Wait For The User Profile Service).
In the System event log of the server on which the user is logging on the following errors are shown:
Source:        Service Control Manager
Date:          23-12-2014 7:28:01
Event ID:      7011
Task Category: None
Level:         Error
Keywords:      Classic
User:          N/A
Description:
A timeout (30000 milliseconds) was reached while waiting for a transaction response from the UmRdpService service.
…and after 30 (or sometimes 60) seconds, the same error only another service (in random order):
A timeout (30000 milliseconds) was reached while waiting for a transaction response from the UmRdpService service.
…and after exactly 30 seconds, the same error only another service:
A timeout (30000 milliseconds) was reached while waiting for a transaction response from the UxmSms service.
etcetera, with the following errors:
A timeout (30000 milliseconds) was reached while waiting for a transaction response from the Netman service.
A timeout (30000 milliseconds) was reached while waiting for a transaction response from the AudioEndPointBuilder service.
A timeout (30000 milliseconds) was reached while waiting for a transaction response from the WPDBusEnum service.
A timeout (30000 milliseconds) was reached while waiting for a transaction response from the NlaSvc service.
The Portable Device Enumerator Service service failed to start due to the following error:
The service did not respond to the start or control request in a timely fashion.
A timeout (30000 milliseconds) was reached while waiting for a transaction response from the TrkWks service.
A timeout (30000 milliseconds) was reached while waiting for a transaction response from the UmRdpService service.
These errors are logged continuously.
An administrator cannot solve this since he isn't able to login in as well (console or remotely), only a hard reset of the VM is possible to use the affected server again.
I took different steps to solve this problem without any success, like:
- Installing the latest Windows updates
- Removed unnecessary printer drivers, print monitors and print processors (no local printers/drivers are installed, only Remote Desktop Easy Printer driver is used)
- Searched different forum posts, but found only hotfixes for Windows Server 2008 R2.
Can someone please help me with this annoying problem?
Many thanks!!
EDIT:
Of course is increasing the time-out not really an option here... http://social.technet.microsoft.com/wiki/contents/articles/13765.event-id-7011-service-timeout.aspx

Hi Jeroentjuhh,
1)Do you see this problem on all VM's or only on Windows 2012 R2 server?
2)Are these VMs' in hyper-v cluster?
3)Do you see event id 56 or 50? Please see the below link if it helps you to resolve these events.
http://blogs.msdn.com/b/scstr/archive/2012/02/29/how-to-troubleshoot-the-terminal-server-security-layer-detected-an-error-in-the-protocol-stream-and-has-disconnected-the-client-client-ip-and-the-rdp-protocol-component-x-224-detected-an-error-in-the-protocol-stream-and-has-d.aspx
Thanks,
Umesh.S.K

How to overcome thisORA-00060: deadlock detected while waiting for resource

Hi ,
I have table name problems(prom_number,prom_relation,prom_impact,prom_prom_number)
Now from oracle form raltion can be set.
parent and chil relation can be set from the form
for ex
first suppose row=1 prom_number=1 is set as parent.
so the tabl is updated as prom_+relation='PARENT'
so after first updation values are
prom_number=1,prom_impact='xxx',prom_relation='PARENT' prom_prom_number=null
now in form level the 2 row which is set as child is update as follow
prom_number=2,prom_impact='yyy',prom_relation='CHILD' prom_prom_number=1
Now my requirment is after the 2nd row is updated the prom_impact of 2 row should be pusehd to row=1 which has the pirom_relation as ='PARENT.
the problem is i dont have the fmb of form so i cant do any changes in the form.
So i have written a trigger which fires when row2 is updated it picks the prom_impact value and trys to push it in row=1 with prom_number=1
however since in form level the table has not been committed it displays the following error
ORA-00060: deadlock detected while waiting for resource
So how can we overcome this error.
the trigger i have written is given below.
So how can we resolve thsis issue.
CREATE OR REPLACE TRIGGER Parent_Child_Impact_Trg
AFTER UPDATE OF prom_relation,prom_prom_number
ON PROBLEMS
REFERENCING NEW AS NEW OLD AS OLD
FOR EACH ROW
Version History:9.2.8.1
(format: version, date, developer, description)
1.0, 19-Dec-2008, Tanmoy Kr Moulik The "Impact" of Paren fault ticket
will be changed upon manual creation of Parent Child relation
Rules:
1.0     Upon manual creation of new Parent-Child fault relation, the 'Fault Impact' of
Child fault will be auto updated in the parent fault, if the parent fault impact matches
with the attached list(Non Serve Affeect or Threat) or the impact of Parent Fault is blank (null).
2.0     In case, the parent fault have fault impact matches with the attached list
(service affect), then its impact is not changed while making the relationship.
DECLARE
PRAGMA autonomous_transaction;
ecode NUMBER;
emesg VARCHAR2(200);
--BEGIN
-- NULL;
CURSOR c1--(v_prom_num NUMBER)
IS
SELECT PROM_IMPACT,prom_number FROM PROBLEMS WHERE prom_number=:NEW.prom_prom_number;
v_prom_imp VARCHAR2(30) DEFAULT NULL;
v_prom_imp_p1 NUMBER DEFAULT 0;
v_prom_imp_p2 NUMBER DEFAULT 0;
v_prom_num NUMBER;
BEGIN
IF :NEW.PROM_RELATION='CHILD' AND :NEW.PROM_PROM_NUMBER IS NOT NULL THEN
--dbms_output.put_line(1);
--INSERT INTO TEMP_PROM VALUES(:NEW.prom_number,:NEW.prom_prom_number,:NEW.prom_impact,:NEW.prom_relation);
--COMMIT;
OPEN c1;--(:NEW.prom_prom_number);
FETCH c1 INTO v_prom_imp,v_prom_num;
--INSERT INTO TEMP_PROM(PROM_NUM,PROM_IMPACT) VALUES(v_prom_num,v_prom_imp);
--COMMIT;
IF c1%NOTFOUND THEN
v_prom_imp:=NULL;
v_prom_num:=NULL;
END IF;
CLOSE c1;
v_prom_imp:=UPPER(v_prom_imp);
v_prom_imp_p1:=INSTR(v_prom_imp,'NON');
v_prom_imp_p2:=INSTR(v_prom_imp,'THREAT');
--INSERT INTO TEMP_PROM(PROM_NUM) VALUES(v_prom_imp_p1);
--INSERT INTO TEMP_PROM(PROM_NUM) VALUES(v_prom_imp_p2);
--COMMIT;
IF v_prom_imp_p1>0 OR v_prom_imp_p2>0 THEN
IF :NEW.prom_impact IS NOT NULL THEN
/*BEGIN
INSERT INTO TEMP_PROM(PROM_NUM,PROM_PROM_NUMBER,prom_impact,PROM_RELATION) VALUES(:NEW.prom_number,:NEW.prom_prom_number,:NEW.prom_impact,:NEW.prom_relation);
COMMIT;
EXCEPTION WHEN OTHERS THEN
INSERT INTO TEMP_PROM(prom_impact,PROM_RELATION) VALUES('failed1'||ecode,emesg);
COMMIT;
END;
BEGIN
COMMIT;
--INSERT INTO PROBLEMS(prom_number,PROM_REPORTED,PROM_REPORTEDBY,PROM_PRIORITY,PROM_DESCRIPTION,PROM_EMPE_ID,PROM_WORG_NAME,PROM_CREATED,PROM_CWORG_NAME)
-- VALUES(50000000,SYSDATE,'TAN',1,'DASD','CLARITY','CLARITY',SYSDATE,'CLARITY');
UPDATE PROBLEMS SET PROM_IMPACT=:NEW.PROM_IMPACT WHERE prom_number=:NEW.prom_prom_number;
COMMIT;
EXCEPTION WHEN OTHERS THEN
     ecode := SQLCODE;
emesg := SQLERRM;
COMMIT;
BEGIN
     UPDATE PROBLEMS SET PROM_IMPACT=:NEW.PROM_IMPACT WHERE prom_number=:NEW.prom_prom_number;
     EXCEPTION WHEN OTHERS THEN
     INSERT INTO TEMP_PROM(prom_impact,PROM_RELATION) VALUES('failed'||ecode,emesg);
     END;
--INSERT INTO TEMP_PROM(prom_impact,PROM_RELATION) VALUES('failed'||ecode,emesg);
COMMIT;
-- EXCEPTION WHEN OTHERS THEN*/
     NULL;
     END;
     --END;
--END;
END IF;
     /*BEGIN
     INSERT INTO TEMP_PROM(PROM_NUM,PROM_IMPACT) VALUES(:NEW.prom_prom_number,:NEW.prom_impact);
     COMMIT;
EXCEPTION WHEN OTHERS THEN
     INSERT INTO TEMP_PROM(prom_impact) VALUES('failed1');
     NULL;
     END;
--NULL;
-- END;
--COMMIT;
--END;
/* BEGIN
INSERT INTO TEMP_PROM(PROM_NUM,PROM_IMPACT) VALUES(:NEW.prom_prom_number,:NEW.prom_impact);
EXCEPTION WHEN OTHERS THEN
--INSERT INTO TEMP_PROM(prom_impact) VALUES('failed');
NULL;
END;
COMMIT;
--COMMIT;
/* ELSIF v_prom_imp_p2>0 THEN
-- v_prom_imp_p2
IF :NEW.prom_impact IS NOT NULL THEN
BEGIN
UPDATE PROBLEMS SET PROM_IMPACT=:NEW.PROM_IMPACT WHERE prom_number=:NEW.prom_prom_number;
EXCEPTION WHEN OTHERS THEN
BEGIN
     ecode := SQLCODE;
emesg := SQLERRM;
--BEGIN
INSERT INTO TEMP_PROM(prom_impact,PROM_RELATION) VALUES('failed'||ecode,emesg);
COMMIT;
--EXCEPTION WHEN OTHERS THEN
     NULL;
     END;
NULL;
END;
COMMIT;
BEGIN
INSERT INTO TEMP_PROM(PROM_NUM,PROM_IMPACT) VALUES(:NEW.prom_prom_number,:NEW.prom_impact);
EXCEPTION WHEN OTHERS THEN
NULL;
END;
COMMIT;*/
--UPDATE PROBLEMS SET PROM_IMPACT=:NEW.PROM_IMPACT WHERE prom_number=:NEW.prom_prom_number;
-- COMMIT;
-- END IF;
END IF;
END IF;
EXCEPTION WHEN OTHERS THEN
INSERT INTO TEMP_PROM(prom_impact,PROM_RELATION) VALUES('failed2'||ecode,emesg);
COMMIT;
NULL;
END;
/

Please do not take this the wrong way, my intention is not to be insulting, but from reading what you've posted I have no idea what you are doing or in what version of what product(s).
What I can tell you, though, is that your explicit cursor declarations with explicit OPEN and FETCH have no business in your code. Neither do incremental commits belong in any code. Nor does the following:
EXCEPTION WHEN OTHERS THEN
INSERT INTO TEMP_PROM(prom_impact,PROM_RELATION) VALUES('failed2'||ecode,emesg);
COMMIT;
NULL;belong in any code. What is NULL doing there? And why are there any commits in your trigger? Your use of PRAGMA AUTONOMOUS TRANSACTION to allow these commits is similarly unexplainable. It is no wonder you are getting deadlocks.
You need to push away from the keyboard and take SQL and PL/SQL courses and learn the basics. While looking for a good course in your area get a copy of any of Tom Kyte's books and start reading it and practicing with the examples.

While waiting for student credentials to be accepted, how do I download Lightroom 4?

While waiting for student credentials to be accedped, how do I download Lightroom 4? My confirmation email says to go ahead and use it for the time being, but nothing on the My Order Page allows me to download. VERY FRUSTRATING!!!!

Download the Try/Trial version from www.adobe.com a few clicks into the Products menu.
Or download LR 4.1 RC from Adobe Labs: http://labs.adobe.com/ which expires June 30th.

I ordered a battery for my laptop because it said to replace battery soon. How long can I let the new battery sit around as I wait for the old one to run out of more charge?

I ordered a battery for my laptop because it said to replace battery soon. How long can I let the new battery sit around as I wait for the old one to run out of more charge? Will the new one become less effective if it sits around too long?

How much capacity is remaining on your current battery?
Check your power status
From the  menu: Hold OPTION and click System Information... èHardware è Power
Copy and Paste in your reply.
The new battery will become less effective if you store it in a hot or humid environment. It should be stored at room temperature (22 C).
Long term storage (6 months):
Apple recommends that you store the battery with a 50% charge. If you store a battery when it’s fully discharged, it could fall into a deep discharge state, which renders it incapable of holding any charge. Conversely, if you store it fully charged for an extended period of time, the battery may experience some loss of battery capacity, meaning it will have a shorter life.
http://www.apple.com/batteries/

MAC OS Yosemite - CS6 - A while back, i did something to where when i open a file in photoshop, it no longer is one window, now it's two separete ones. one for the program itself, and another for the actual file how do it get it back to where it's all one

- A while back, i did something to where when i open a file in photoshop, it no longer is one window, now it's two separete ones. one for the program itself, and another for the actual file how do it get it back to where it's all one window without having to be in full screen mode? I've managed to go some time like this, but right now it's just really annoying me. HELP!!!

Just drag the small window to the top right below the toolbar, you'll see the area highlighted and when you drop it the file should dock.

My firefox quite often crashes ,with this message"FIREFOX IS NOT RESPONDING" IF YOU CLOSE THE PROGAM YOU MIGHT LOSE INFORMATION. THESE APPEAR UNDERNEATH CLOSE THE PROGAM WAIT FOR THE PROGAM TO RESET, SO HOW DO I FIX THIS

My firefox quite often crashes ,with this message
"FIREFOX IS NOT RESPONDING"
IF YOU CLOSE THE PROGAM YOU MIGHT LOSE INFORMATION.
THESE APPEAR UNDERNEATH >CLOSE THE PROGAM > WAIT FOR THE PROGAM TO RESET, SO HOW DO I FIX THIS

See:
* http://kb.mozillazine.org/Firefox_crashes
* http://kb.mozillazine.org/Firefox_hangs

How do I optimize "Waiting for the next frame"

When running my swf file in release build, the first time I start the browser after cleaning the browser cache, the .swf will appear in less than a second. If I attach scout, I can see it is around .7 seconds to finish.
However, after this run all subsequent times I load the page, it takes ~3 seconds.
When I look at scout, I see almost identical CPU and memory use , but it is spending ~2.3 seconds "Waiting for the next frame". (almost an extra 700ms per frame).
There is no requirement for animation, all of the content is very static. I'd just like to render it as fast as possible.
I know it's not related to caching the .swf file because I have tried turning off the caching (by adding a random parameter) and verified using Httplogger that it is always downloading a new .swf file. (I turned back on caching). So I'm kind of not sure what to do next...
What things can I try to optimize this? Are there places I can read about this issue?
(P.S. >> I notice it spends a lot more time "Waiting for the next frame" when I build a debug version. Don't know if that's relevant...)
Thanks!

There's nothing you can do about "Waiting for next frame" - this is simply the time when Flash Player has finished doing everything it needs to do for the frame, and waiting for the OS to wake it up again. This depends on the framerate you set in your swf - roughly speaking, the waiting time is the budget (1/framerate), minus the time Flash Player spends doing actual work.
You can find more information here, about understanding how the data you see in Scout relates to how Flash Player works:
http://www.adobe.com/devnet/scout/articles/understanding-flashplayer-with-scout.html
btw, you shouldn't look at performance in a debug swf - you'll get wildly misleading results.

HT1657 The movie I rented didn't downlaod, but I was charged for the rental. How do I get it to download without being charged again?

I rented a movie from itunes, but it didn't download to my ipad. I was charged for the rental. How can I download it without getting charged again?

Try the 'report a problem' link from your purchase history : log into your account on your computer's iTunes via Store > View My Account and you should then see a Purchase History section with a 'see all' link to the right of it ; click on that and you should see a list of your purchases ; find that film and use the 'Report a Problem' link (iTunes support should reply within, I think, 24 to 48 hours).
Some people have had a problem with the 'report a problem' link (it's been taking people to this site on a browser instead of showing a form in iTunes) - if it does that to you then try contacting iTunes support via this page : http://www.apple.com/support/itunes/contact/- click on Contact iTunes Store Support on the right-hand side of the page.

While waiting for the rental interface - how to view rental on Apple TV?

Similar Messages

Maybe you are looking for