White and black vertical lines

I Have the iPhone 5. It has been in a case since the day I bought it. It is 2 months out of warranty and I got white and black vertical lines while I was laying in bed. My friend tried checking my screen and replaced it with a working screen and it did the same thing so it wasn't the screen. Took my phone to Apple they said it's the screen and I have to pay $130 to fix it even with it out of warranty..... Lady standing next to me had the same problem they plugged it in fixed it and she was on her way with it. What is wrong with my phone? What should I do?

and one more thing, itunes cannot read my device i did that for 20-30 sec but it won't turn on

Similar Messages

Blue and Black Vertical Lines on Startup then freeze 10.7.3

I have a 2007 MacBookPro. shortly after installing Lion 10.7.3 and VectorWorks 2011 I started getting vertical blue and black lines across my screen on startup. They remain with in the apple while the computer boots and the everything freezes. I tried all of the usual fixes, recovery, safe boot, reset PRAM, battery, etc. Nothing helps. When I tried to boot of a system disc I get a message sating that I need to restart my computer. Upon restart same problem occurs. 2 months ago I took the whole thing apart and cleaned out the guts. Reconnecting all cables back together, I came across, what I think is the camera cable. Since my camera has been erratic, i decided to test the problem with it connected and then disconnected. Connected same problem. Once i unplugged the camera everything went back to normal, until now. The same problem returned. I cleaned out the guts again. This time I unplugged the hard drive to try and boot off the C drive, but still get the same problem. This morning It decided to boot up. I was able to copy my essential files onto an external drive. Any one have any suggestions on repairs or what the problem may be? Hardware, Software? Should I do an erase and install if I can get it to boot off the C drive? Any suggestions would be appreciated.

Ogelthrorpe.
Once I was able to boot off the C drive and performed a hardware test of the systems disc only to find nothing wrong??????????????? Since It booted this morning, I am working on it as we speak, everything seems normal except I had to adjust the time and date. Oh, I got a error message upon boot. I don't understand the code in it, but it seemed like the kernel was confused. I am afraid to shut it off and not be able to reboot again.
Unfortunately, no apple store where I now reside!!!!
Thanx

I suddenly have blue and black vertical lines on my screen. This computer is only 3 months old. What can I do?

Starting a few weeks ago I got a cluster of blue and black lines at the bottom righthand corner of my screen. It was frustrating and annoying but I ignored it. Now there is another one closer to the top lefthand side. It's very frustrating as this computer is only 3 months old!! please help!

Take a picture if the problem just in case the aberration does not show in the presence of the technicians.
Ciao.

My MBP keeps freezing with red and black vertical lines. What's going on?

About once a week my early 2011 i7 macbook pro seems to freeze with these weird lines on screen. I was using Adobe Photoshop CS6 and had quicktime playing an mp3 in the background. Nothing out of the ordinary happened that I know of that could have triggered the computer locking up.
I took my MBP to the Apple store and they said it passed all diagnostic tests. They suggested that since it is sporatically happening, it may be weeks before an answer is given to the problem that I am experiencing. Here are some pictures I took when my mac last froze.

Were you ever able to resolve this? My friend's early 2011 MacBook Pro with your same specs except with 10.6.8 just did the same thing while Google Earth 7.1.2.2019 was running. Never any other issues, just happened out of the blue.

I bought a macbook pro retina ME665 in Dubai, and 3 month later its display stopped working properly.some white lines appeared on it and display itself became white and black. Can anybody suggest what should I do to fix this problem?

In October 2013 I was on Vacationin Dubai and bought there Macbook pro retina ME665. I returned to Kyrgystan (home town) and for New Year I was away for a week. When I came back i found that the dispaly of my laptop became white and black, some lines appeared on it. Everybody in my family told me that no one has dropped my laptop or done anything that can cause this problem. there is no any service provider of apple in my country. WIl, the international warranty cover this case? I bought this laptop not from apple store,but in a simple store and I lost reciept.

Put the Serial Number in here...
https://selfsolve.apple.com/agreementWarrantyDynamic.do
to see if it is registered with Apple..
And see here for Contacting Apple World Wide for Support and Service
http://support.apple.com/kb/HE57

Small Black Vertical Lines follow my mouse pointer AND surround all ICONS

Small Black Vertical Lines follow my mouse pointer AND surround all ICONS on my desktop. I just turned on my computer and it showed like this. I already tested my monitor and it's not the monitor.
See a picture of my problem here on my me gallery:
http://gallery.me.com/egarfias/100024
Looking at websites, it's fine the display but any icons and my pointer and things that move have these lines following! Looking at VIDEO, it's the picture is full of white and black lines though you can see the video just fine.
Any ideas? Thank you!!

I am in Safe Mode now: This is the weirdest thing: A bit from column A AND B:
The display is perfect EXCEPT for two parallel lines of 17, 3 millimeter-long black lines that follow the pointer everywhere it goes.
Get this: my current display is 1024x768, but when I change it to 640x480, the pointer and everything is perfect! (of course, I can only see a fraction of my desktop)
But then again... when I zoom in and out holding down control (in 640x480) the pointer lines appear again, but less lines. They disappear when I re-reset it to 640.
Strange.
But yeah, safe mode is NEAR perfect with the except of the cursor lines. I can screen grab my cursor though to show...

IPhone 5 Battery stays at the same percentage, phone fades shows white and black lines then dies. Now phone screen is shaking and does the same thing.

My iPhone 5 which has been working fine has only today started to get these problems. The phones battery percentage stays at the same number and only changes if i swith it off or when it does it byitself but then stays at that number. When I use it it constantly turns off by slowly fading then showing white and black lines then going off. The screen is now shaking and keeps turning off. It was on IOS 6 which I just updated as I thought this could be the issue but it still does the same thing on IOS 7. Has anyone else experienced these problems or know what is wrong with my iPhone?
Please reply!

Sounds like the device is failing. Since you updated to iOS 7, that would do the same as a restore. I would make an appointment at the Genius Bar at Apple to have the device checked.

Black Vertical lines and a thin yellow haze in the center of my screen

I can't seem to find the answer to this question, or one that my be a solution. I recently discovered black vertical lines and a yellow haze in the center of my ipod nano 4GB.
One discussion said I should put it to sleep for 4 hours and the lines will erase. That didn't work. What's the common cause to this and how can I fix it? And could it be because I converted it from a mac to windows itunes?

Try giving it a reset. hold down the sleep and home keys until you see the silver apple. Let it reboot and see if that fixes it.

I tried updating my iPod touch 4th gen and now the screen is bright blue or flashing white and black lines.ive tried the whole home and power button thing but it only brings up the apple icons then goes back to the blue or other screen.please help?

I tried updating my iPod touch 4th gen and now the screen is bright blue or flashing white and black lines.ive tried the whole home and power button thing but it only brings up the apple icons then goes back to the blue or other screen.please help?

This has worked for some others.
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

Blue and gray/black vertical lines on start up screen.

At start up my 2008 MacBookPro brings up a blue and black/gray vertical lines covering the entire screen. It has a large image of the power button and tells me "You need to restart your computer. Hold down the Power button for several seconds or press the Restart button". We've tried that. It restarts, makes the start up noise and gives the same prompt with the same blue and gray vertical lines in the background. Any idease on what our problem is?

MacBook Pro (Early 2008): Dark bands showing intermittently on built-in display
MacBook Pro: Distorted video or no video issues . The affected computers were manufactured between approximately May 2007 and September 2008.

I have a officejet pro 8500 getting a black vertical line only when i put doc. in feeder?

I have a officejet pro 8500 getting a black vertical line only when i put doc. in feeder?
thanks Karl

Clean the small glass strip under the ADF, also clean the withe scanner backing and white strip under the ADF.
I was an HP employee.
Kudos are appreciated if I have helped you.

Actual solutions for C6380 black vertical lines ?

When copying or scanning on my C6380 all-in-one, black vertical lines that are generated from the hinge-side of the glass appear on my documents. While this problem has been posted and re-posted over and over again the only responses I've found have been to clean the glass and inside of the cover. I have done this several times. I have also reinstalled the driver and unplugged the power cable from the both the printer itself and the outlet. The lines do not occur when printing Pages or Numbers or web-generated documents. Any suggestions?
I have a hunch that the only solution is to put up with the lines or but a new copier/scanner.

You can give a try to the Troubleshooting steps in this link:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02169248&cc=us&lc=en&dlc=en&product=3560280&tmp...
Resets should work. Seems like a scanner bulb issue.
I work for HP but my posts and replies are my own.
-Michael

I have blue and green vertical lines on my iMac which is no longer covered by Applecare. Is it fixable?

I have blue and green vertical lines on my iMac which is no longer covered by Applecare. Is it fixable?

What model iMac? Could be a failing video card but maybe not. Is it that way on every screen, startup to shutdown, any time the screen is lit?
Do you have an AASP nearby? Time to have an estimate made. Fixing it will likely be very expensive.

Iphone 6 plus screen flashing white and black

My iPhone 6 Plus 16Gb suddenly started to show screen artifacs, like flashing with white and black, so I can't see the springboard only black and white screen. Restart of the phone didn't help. Even when the phone is booting, Apple logo doesn't appear and then again flashes. As it seems on background everything is working, as I can receive sms and phone calls. It is just the screen. iPhobe 6 Plus is brand new, I've been using it for 1 week and it never dropped. No physical damage, no nothing, just flashing

Have you tried a Reset by holding down the Sleep / Wake Button and the Home Button at the same time until the white Apple logo appears, then let go of the buttons, but wait until the Reset completes and you are back at your lock-screen? If this doesn't work then do you have a computer with the current version of iTunes? If yes and you already have a Backup of your Media and Data on iCloud or iTunes, then you can put the iPhone in DFU Mode. Don't do this unless you have a Backup and also have a computer with the latest iTunes. You will need your Apple ID and Password. To go to DFU Mode you can hold the Home button while you plug the Lightning Cable into the iPhone, a graphic will appear on the iPhone screen showing that you need to connect to iTunes. At that point just connect the iPhone via the Lightning Cable with USB into your Computer. Open the iTunes App on the Computer and wait until a button appears representing the connected iPhone. Then click on the iPhone button on the iTunes screen and it should open to the Summary page. At that point you can Restore the iPhone to Factory Settings and bring it up as A New Phone. The iPhone should screen should then show Hello and you will need to connect to your WiFi via your Router WiFi Password and then answer all the question put forth by the iPhone. When the "Lets Get Started" occurs you can thoroughly check out the iPhone to make sure it is all OK. When satisfied that things are good, you can plug into the computer and iTunes and this time Restore from Backup. or if you Backup is in iCloud you can Restore over the air.

White and black point vs ??

I never know which forum to post these things, so I'll start with the photographers.
 
 These three shots are as follows: (1) the camera raw version, (2) where I moved the sliders from the ends to approximately the beginning/end of the major portion of the histogram, and (3) using the threshold control to find the white and black points in the main part of the picture.
 
 Then, in the two adjusted versions, I lightened the image with the curves control.
 
 In both these cases, I used the grey dropper to touch the same spot on one of the rocks, to get the apparent neutral point.
 
 It seems to me that the threshold method to find the white and black points is preferred, based on the overall color and appearance of the finished adjustment.
 
 But, I've found on some images where the histogram has missing black and missing white, if I adjust the sliders to these two ends, I get pretty much the same outcome, as far as the contrast, color, and grey point.
 
 Could I have some advice on the preferred method to use in handling my image adjustments? Doing it the threshold method takes more time, and sometimes it's difficult to find the white and black points, or even the grey point.
 
 Thanks.
 
 Al
 
 
<a href="http://www.pixentral.com/show.php?picture=1SlEeG9kfwzD34gVOEcCbg7Ktp83p3" /></a>
<img alt="Picture hosted by Pixentral" src="http://www.pixentral.com/hosted/1SlEeG9kfwzD34gVOEcCbg7Ktp83p3_thumb.jpg" border="0" />
 
 
<a href="http://www.pixentral.com/show.php?picture=1tIEs4eAyKz4sxamyVaYRlKjTIIfKj" /></a>
<img alt="Picture hosted by Pixentral" src="http://www.pixentral.com/hosted/1tIEs4eAyKz4sxamyVaYRlKjTIIfKj_thumb.jpg" border="0" />
 
 
<a href="http://www.pixentral.com/show.php?picture=17K3ewFXsGo4K2uH5TGfO06CdVayyn1" /></a>
<img alt="Picture hosted by Pixentral" src="http://www.pixentral.com/hosted/17K3ewFXsGo4K2uH5TGfO06CdVayyn1_thumb.jpg" border="0" />

Yes the image was purposely underexposed. What I was trying to accomplish was to speed up the shutter speed to remove the slight blurring and compensate by pulling data from the shadows. Even though the lens has an image stabilizer the amount of light wasn't enough for a proper sharp shot.
this image is before touch up
These two images are F/5.6, 1/20, ISO 800
After touch up
Better lit scene but shows slight motion blur
This last image is F/5.6, 1/4, ISO 800
I believe that I will have to wait next year and hope I have a faster lens by then. I just don't think the 28mm-135mm f/3.5-5.6 lens is fast enough. I was trying this without a tripod to get in tighter.
Also I was taking these shots without the flash to get the drama of the tree lights.
What I would have prefer is a shutter speed of 1/125 or better as it helps with my hands shaking I believe the slowest should be 1/60
And the lower the ISO the better for noise.
These preferences are what I am used to with my Canon G3 that does not have IS.
I am getting so off track here, lol. But anyways, here are the pictures.

White and black vertical lines

Similar Messages

Maybe you are looking for