White and only audio playback

I am attempting to playback a video recorded on a 1080i60 HDV camera and all I am getting is a white screen with audio. How come I cannot view the video as well? Also, I get the same thing when I try to import it into FCE HD. What do I need to do?

I have the same problem. But, the only difference is that when i click on a video i have made on a digital camera in iphoto, quicktime opens and says that i am missing a component to the application.I can play the sound of my video but the screen stays white. Quicktime does not say which one i'm missing so, im unsure which one to download!
Please help!

Similar Messages

I try to get log on to the itunes store, says accessing store that the screen goes white and only the apple symbols is in the top box...nothing else...WHY

okay i have been trying to access the itunes store from my computer and after i click the tab the words accessing itunes store scroll across screen the the screens goes white and only the apple symbols is in the box.....WHY. Is the store down??

Hello there jodi o,
It sounds like you are unable to access the iTunes Store on your computer. I would recommend you use the following article to help troubleshoot that:
Can't connect to the iTunes Store
If the issue persists after using the info for your operating system in the above article, here is the more advanced version with further troubleshooting info:
iTunes: Advanced iTunes Store troubleshooting
If you are using Windows, you should also try the information in this article:
Apple software on Windows: May see performance issues and blank iTunes Store
Thank you for using Apple Support Communities.
All the best,
Sterling

HT202157 Rented movie on ipad and only audio would come through on my Apple TV. What is wrong?

I Rented a movie on my ipad and tried AirPlay on Apple TV but only audio came through how can I watch video too?

Previews and trailers do not contain 5.1 audio.
If you have recently moved your setup, you may have inadvertently changed some of the settings on your receiver. It certainly sounds as though it is unable to play the 5.1 audio from the Apple TV.

Video Player - green screen and only audio

Hi all,
nice to meet you!
had a problem with my laptop: when i play any video on youtube or other, i can't see any image but only a green screen and the audio.
after rebooting the pc, it works for 1 or 2 video and then the situation becames as described above!
can you support me?
Thanks,
Lorenzo

Hi,
For online videos, perform a clean install Flash Player may help:
http://helpx.adobe.com/flash-player/kb/clean-install-flash-player.html
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Video and some Audio Playback issues

My downloaded video's on iTunes and Quicktime are not playing properly. They play without any sound what so ever and they stop after only a few seconds. They used to work perfectly before!!!
Also, on web pages like MySpace and YouTube, sound again does not work. I've checked my System Preferences for Sound and I am sure it has nothing to do with streaming.
PLEASE HELP!

i adjusted the settings in the Utilies folder for Audio Output!

Stop and go audio playback

Whether I'm watching a DVD or playing MP3's off of my hard drive, I get this weird stop and go along with a 'honking' type sound. Sounds kind of like the buzzer when you get a question wrong on Jeopardy. I posted this almost a month ago but got no responses. Did a live chat with an HP tech guy and he had me reinstall all the drivers and update the BIOS. Didn't help and now it's getting progressively worse. Most annoying!

resolved

Random Audio Crackling and Popping on playback in FCP and Pro Tools

Hello All,
In both Pro Tools LE through an original MBox (with latest firmware), via USB and Final Cut Pro using an Edirol USB audio interface, I get random cracks and pops in different places that aren't in the actual audio files. They are not in the waveforms, and they never happen in the same spot twice...just random. There's no telling when they will be heard, but they are very loud and sharp, and I'm afraid of damaging my powered monitors, not to mention my nerves as I'm in the middle of an intense sound design for a film.
I've tried looking up this topic, and I've seen some topics mentioning sync/clock....like it's a problem with sync being generated internally, as opposed to using an external word clock generator. I never had this problem before on my older dual 2.0 PowerMac (PPC), and I really can't spring for a word clock generator right now...anyone else experience this with their Intel Mac Pro? I've looked for new firmware updates et al, but everything on the computer is up to date. This is really driving me nuts right now.
PowerMac G5 Mac OS X (10.4.3) Dual 1.8
Mac Pro Mac OS X (10.4.8) Dual 3.0

Interesting point about the winter/static. The only thing is that I never had those problems before with the same setup on my older dual 1.8 PPC G5 PowerMac, through several winters.
My current setup is a dual 3.0Ghz Intel Mac Pro with 3Gb of RAM. the RAM is the right kind and it has checked out as a-okay via numerous tests. The video card is the stock NVidea 7300 GT. For Final Cut Pro and general audio playback, I use an Edirol UA-1EX usb interface http://www.roland.com/products/en/UA-1EX/index.html (w/ updated drivers and all) hooked up through one USB port. For Pro Tools LE 7.3.1, I use an original Mbox, also updated with the latest firmware and all (got rid of the distorted noise problem with firmware update v22), also hooked up to a USB port. I used this exact same setup on my previous Dual 1.8 PPC G5 PowerMac with no such issues for several years. Both interfaces are routed to a Mixer, and onto my monitors. I don't think it's the mixer that's doing it because it didn't ever crackle/pop with my older G5, and still doesn't, which I still use for other things, but routed through the same sound system. I can understand the use of an external clock generator and such, but for many years, I never had this problem with random crackle/pop on playback with other computers that did not use an external sync/clock device. I would think that a computer as new and 'advanced' as the Intel Mac Pro would offer even better results than previous models. Again, the noises aren't printed onto the actual sound files, they come up randomly, but most often after adding a fade/volume change/effect and playing back.
I have just installed a PCI-Express USB 2.0 card for use with both the Edirol and MBox, just in case it was an issue with the built-in MAC USB ports. I will see if that helps.
Mac Pro Mac OS X (10.4.8) Dual 3.0
Mac Pro Mac OS X (10.4.3) Dual 3.0
Mac Pro Mac OS X (10.4.8) Dual 3.0
PowerMac G5 Mac OS X (10.4.3) Dual 1.8

Ics broke bluetooth to auto for calls and audio playback

After upgrading to ICS (4.0.4) on my RAZR MAXX, I can no longer maintain a bluetooth session with my car and the audio playback is not working at all. The connection begins and drops after less than 1 minute. This cycle repeats. Calls and audio worked with the same car configuration in Android 2.3.4. After a long search on the net I learn that this is a common problem. Has anyone heard about a patch or work around? I tried disabling wifi - no joy.

I have the same problem with my DROID RAZR. I use a Plantronics Pro+ headset and regularly have hour long conference calls. I had no connection problems prior to ICS. When I upgraded to ICS, the Bluetooth connection started dropping. It will drop then reconnect, then drop, then reconnect, every couple minutes. I end up holding my phone to one ear with the Bluetooth on the other, the call rotates between them. VERY ANNOYING. UNACCEPTABLE. I tried a second Bluetooth headset (also Plantronics Pro+). it worked for about 2 days, then had the same problem.
From reading various postings, I believe this is a problem with ICS and the Bluetooth connection. Nothing to do with what type of headset, automobile, etc. It may be only those of us that had Android 2.3.4 and upgraded to ICS.
BobR

Only white and sound

hi
I am trying to play a movie that is an avi, but whenever I play it, alll that it plays is white and the audio for the movie file. I already have Divx Mplayer, and VLC, but those didnt work eighther. Mplayer did have the sound and the video, but the sound track played at about 3 times th speed of the video, so after a few secconds the audio was practically a minute off. What should I do?

There is no single codec for movies that have .avi extensions. AVI is a container format, not a specific type of file. An AVI movie may use one of the Indeo codecs (there are at least four that I'm aware of, none of which have been ported to Mac OS X) or one of the various flavors of DivX, among other possibilities. You'll have to find out what codec was used for the movies you want to view to determine what you need. Note that not all codecs for the various .avi movies are available for QuickTime.
If you want to try "hit and miss", you can try the codecs at http://www.divx.com/ and http://www.3ivx.com/ and see if one of them will work for you. You can also give this player a try:
http://www.videolan.org/vlc/
Forum Tip: Since you're new here, you've probably not discovered the Search feature available on every Discussions page, but next time, it might save you time (and everyone else from having to answer the same question multiple times) if you search a couple of ways for a topic before you post a question.
Regards.

Skipping Audio Playback of Raw AVCHD Files in PE7

I get constantly skipping/dropping audio when playing back AVCHD clips in PE7. These are pretty long takes imported from a Canon HF10 camera. The video seems to playback OK with no jitter/judder or dropouts.I have tried reducing the clip to a 3 minute length but audio still skips/drops every 3-5 seconds for a second or so. I rendered/exported a short test clip to a .wmv file and a 780p file and the audio playback is just fine on the rendered clip. I'm using a Vista 32 Dell 730 desktop with 4 gigs ram and 2.6 quadcore processor and all editing on internal Sata drives. I had the Pinnacle studio 12 editing package first but moved to PE7 due to freezes and crashes. Anybody got any ideas? Thanks!

For HD editing in PrPro, Adobe also recommends a RAID 0 (or similar) media disc. Both HD Audio & Video need a fast file transfer rate. Many get by without the RAID, but it has helped many others. Just a thought.
Also, if you have fewer than 3 internal HDD's, and some of the ones that you have are doing multiple duty, like OS/Programs, and then Project/Media/Scratch Disks, the stream can definitely be too slow to get both smooth Audio and Video.
How is your I/O sub-system set up? Number of HDD's, sizes, speed and controller type?
Hunt

Audio playback is very quiet after Windows 8.1 upgrade on Pavilion g7

I recently updated to Windows 8.1 trial version and the audio playback is very quiet through the laptop speakers. Through headphones or played through the TV it works great.
I have a Pavilion g7.
When I check the drivers they tell me that I have the most recent divers.
Any help would be greatly appreciated.

Hello, @Nautic-Al
Welcome to the HP Forums.
I see that you're having an audio issue with the notebook. I would like to try to help you with this.
As you're using a Trial version of Windows please read this document: HP PCs - About Beta or Preview Software.
To go along with that I will provide you this document for troubleshooting: No Sound from Speakers (Windows 8).
If that does not help you, then you'll have to revert back to the installed OS or completely upgrade to a non trial version.
Thank you for posting on the HP Forums.
I worked on behalf of HP.

Device driver error msg at startup-get white screen w/audio during playback

PE10 has been working fine until today.
Upon startup I get an error message saying my display driver is incompatible.
I checked the driver in Windows 7-it says the driver is up to date and working fine.
When playing back a video clip I'm editing in PE10, I get a white screen in the playback area with the correct audio. When I pause the playback, the video image appears. Play = white playback screen.
I have
-checked the display driver
-rolled my computer back to an earlier restore point
-uninstalled and reinstalled PE10
-turned off my firewall
Any other suggestions to try?

What version of Premiere Pro? Include the minor version number (e.g., Premiere Pro CS5.5 with the 5.5.2 update).
Premiere Elements 10
Have you installed the recent updates? (If not, you should. They fix a lot of problems.)
none available
What operating system? This should include specific minor version numbers, like "Mac OSX v10.6.8"---not just "Mac".
Windows 7 AMD dual-core processor
AMD Radeon HD 6310 display driver
What kind(s) of source footage? When telling about your source footage, tell us about the codecs, not just the container types. For example, "H.264 in a .mov container", not just "QuickTime".
MVI files from camera -- all worked fine in PE10 until today - same files play fine in other players
If you are getting error message(s), what is the full text of the error message(s)?
What were you doing when the problem occurred?
Starting up PE10
Has this ever worked before?
Yes, always until today.
What other software are you running?
None
Do you have any third-party effects or codecs installed?
No
Tell us about your computer hardware. Be especially certain to tell us about third-party I/O hardware (e.g., AJA, Matrox, Blackmagic, MOTU).
I'm not techie and don't know what this means - I don't have anything mentioned in brackets
Are you using Mercury Playback Engine GPU Acceleration?
no
Does the problem only happen with your final output, with previews, or both?
Error message above happens during startup
PE10 now loads really slowly (5 minutes)
Playback in project gives white screen instead of video. Audio is fine.

X201 hangs and makes noises during audio playback

Hello, I've a 3249CTO X201 with 8g of ram and an updated Hdd (seagate momentus xt 500gb with 4gb ssd).
I had issues with the Hdd that where partially resolved with a seagate firmware update (the hdd kept going from standby to active mode without apparent reason and it was assumed to be a too agressive power saving mode...)
Anyway, my issue here is the annoying chirping sound coming out the speakers during any audio playback (online audio streams, films, mp3, youtube... you name it!) anytime the Hdd is accessed.
It even seems like everything just hangs for anywhere between 0 and 2 seconds at the exact same time.
It only happens when on battery and using w7 pro 64bit. If I use ubuntu from my 8g sdhc card, it never occurs (even if I use chrome on both and watching the exact same youtube video). (NOTE that I did access the hdd from ubuntu to prove my point...)
I think it is related to the power gestion of the system and I've tried a countless serie of different power management settings. It affect the frequency of the episodes (would occur more or less often) but it still happens.
When plugged in, it never occurs....
If it doesn't occur under ubuntu (I mean never!), it should not be hardware related, however the w7 way of managing power is different so I tend to think there IS a hardware issue (weakness) wich might be highligted by the OS.
Anybody has a good lead on this?

Hello Fafaneboat,
It might be an issue with firmware of your system, I would like to suggest you please visit the below mentioned web link to download and install few drivers according to your Operating System.
support.lenovo.com/en_SG/downloads/default.page?
Kindly put your 7 digit TYPE-Model(3249CTO) number of the system in the Quick path
1. Please download and update the Power Management driver and Power Manager(Please uninstall the previously installed driver and software first).
2. Please download and update the BIOS of your system.
To check the previous BIOS version and date, please click on START> type msinfo32> press Enter. It will open System Information Window. You can check the BIOS version and date from there. Kindly match the driver version and date and if the driver and download link have updated driver then please update the BIOS of your system.
Please perform and check how it goes, It might resolve the issue.
Regards,
Harish
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution".! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

HTML5 Audio Playback issue from firefox 33 and above.

I have created an application which was working just fine till firefox 32. It is still working fine in firefox 32. But from firefox 33 and above, the audio playback does not start intermittently.
I tried to debug and find the problem further. What I observed is that the html5 audio element in firefox 33 and above does not dispatch 'readyState' event as 4 which is needed to start the playback. It shows its value as '2' due to which, the 'canplay' event is not getting triggered.
This issue is replicable on local machine as well using some bandwidth throttling software. Also, it is important to note that this issue is visible on MAC's firefox. On windows, things are working just fine.
If anyone has any solution of this problem, please let me know.

Actually, I ran all but ADW and I included Super AntiSpyware. There is no virus. It is only V33+ and other browsers work fine. I think I will give up on Firefox for now until I upgrade to Win 7.
Thank you everyone for your input.

NO AUDIO with QuickTime Pro and MPEG-2 Playback

I just purchased Sony Camcorder (Sony DCR-DVD610 DVD Handycam Camcorder with 40x Optical Zoom) and recorded some movies. But when I tried to view it through my iMac (Version 10.4.11) the MPG format files wouldn't played.
So I purchased "QuickTime Pro 7.5" and "MPEG-2 Playback" -- Well, the movies finally played BUT NO AUDIO at all. I also downloaded several supported codecs but still failed -- NO AUDIO.
Anybody knows the answer?. Please help -- Thanks much!

So I purchased "QuickTime Pro 7.5" and "MPEG-2 Playback" -- Well, the movies finally played BUT NO AUDIO at all. I also downloaded several supported codecs but still failed -- NO AUDIO.
All DVD camcorders I've seen use AC3 for audio. As QT Kirk pointed out, this audio format is not supported natively by QT which is why you need the latest Perian or the A52 codec installed.
The camcorder comes with 3" DVD+RW. Since my computer is iMac with CD/DVD drive slot on the side, I can't play the 3" DVD. The drive only play the regular 6" CD/DVD...
I believe Rick was trying to find out if you can connect the camcorder via the USB cable (closing iMovie '08 if it opens) and access the movies at the file level directly from the camcorder. If you can see the files on the camcorder, then they can be copied to your hard drive and/or opened in MPEG Streamclip for viewing/conversion to iMovie '08 "edit" compatible file formats. The free MPEG Streamclip application, together with the $20 MPEG-2 Playback component which you have already purchased, will allow you to convert your video files to DV, AIC, M-JPEG, Photo-JPEG, MPEG-4, or H.264 video with DV, AIFF (Big/Little Endian), Uncompresses, AAC, etc. compatible audio. DO NOT CONVERT TO APPLE ANIMATION OR APPLE VIDEO COMPRESSION FORMATS as they will import and edit but not export properly from iMovie '08. DO NOT USE QT PRO (or any other QT application) TO CONVERT YOUR FILES as this work flow will not retain the original audio content. (I.e., your original QT Pro conversion attempt may have lost the original audio content and, if so, no added component will now allow you to hear the non-existent audio.)

White and only audio playback

Similar Messages

Maybe you are looking for