White background on form

When i select a white background for my form - when in test mode the fields disappear from view. They are there but that does not help the people filling in my forms. How can i fix this issue?

Saved the form as a pdf
Regards
Joshua Hromis
Head Coach
0421 933 067
[email protected]
www.crossfitcollingwood.com

Similar Messages

How do I avoid the white line that forms around objects I've separated from a background?

This is a cropped corner of an illustration I removed from its opaque background and placed on a transparent background. The north and west borders show the whilte line that forms whenever I place objects on a transparent background. The south and east borders are the cropped edges -- they are clean and make the trasition from object to background color without that white line. With some objects, it's possible to use the Plygonal Lasso Tool, for instance, and trim that object away from the background. With portraits or irregularly shaped objects, though, it's necessary to use the Magic Wand or other means to trim the background away from the object, which results in that unwanted white line. I've read for hours online about this problem and have found no true resolution: Defringing, Removing White Matte, Anti-aliasing, trying to predict what color you'll lay the silhouette on and working in that color, and on and on. It seems as though Photoshop would be relied upon heavily by professionals who need to place objects on top of one another without intrusion. Does anyone have a method that really works?

Hi! If the solutions you mentioned aren't working for your project, it might be worth learning a little bit about Layer Masks. This is a page that explains how Layer Masks work. http://helpx.adobe.com/photoshop/using/masking-layers.html
A Layer Mask is a black-and-white image that corresponds to your source image applied in such a way that white areas display and black areas don't. So for your project, you would want to use Photoshop to turn your scanned illustration into a black-and-white image where the area you want to keep is white, and the area you don't want to keep is black. Here is a demo using your uploaded image:
1. Open your image in Photoshop. Right-click on your source layer in the Layers Palette and select Duplicate Layer.
2. With the upper layer selected, use Image -> Adjustments -> Desaturate to turn the layer black-and-white.
3. Use Image -> Adjustments -> Invert to reverse the black and white. Now the white background should be black.
4. With the upper layer selected, use Image -> Adjustments -> Levels. Move the black, white, and gray arrows such that there is a hard black-and-white contrastwhere you want the white background to be removed.
5. You may have to use the lasso tool or the brush tool to complete the silhouette of the image against the white background.
6. With the upper, black-and-white layer selected, Edit -> Select All and Copy. Turn the layer visibility off so that you are again looking at the original image.
7. With the lower layer selected, click the Layer Mask icon. Alt-click on the Layer Mask to edit the Mask directly.
8. Edit -> Paste to apply the black-and-white image you created as a Layer Mask. If you then click the layer icon again, you should be looking at your correctly cropped image!
Hope this helps.

PSE3, how to make white background for silouette

I have taken a few pics of my grandkids in silouette form. That is, profile shots taken against window with snowy background. I've done a conversion to B/W, but need to darken it further. My main question is, how do I put a selection on a pure white background? Barbara, I have your book, but I haven't been able to figure it out yet. Do you have specific pages to look at? I know how to make a decent selection, but that's about it! Thanks.

Donna,
1. Make selection of silhouette
2. Go to Edit>copy
3. Go to File>new>Blank file> Color Mode:RGB. Background contents:White. Size H&W for your paper stock.
4. Go to Edit>paste.
5. Position selection with move tool.
Ken

PSE 7 - Layer Styles don't show on white background?

Hello!
I've encountered some odd, but repeatable, situations with PSE 7's Layer Styles. If you have a white background, add a layer to that and then apply the Layer Style (like "Blue Ghost," "Heavy Noisy," "Noisy," "Radioactive," and others) you do not see the Layer Style.
However, the layer is marked with the "fx" symbol. And...what really surprised me is that if I change the color of my background layer to anything but white, they then show up! Note that things like "Radioactive" is a bright green edging layer styleit should easily show up on white. And my layer that has the layer style applied to it is above the background layer and visible. The picture part of the layer is quite visible, but the layer style is not as long as the background layer is white.
I think this is a glitch/bug...but it's odd, because it's not there in PSE 6 and I can't imagine why Adobe would change this in PSE 7...and as far as I know there is no "new" feature associated with Layer Styles in PSE 7.
If anyone has any other information on this or a work-around, I'd be most interested in hearing about it.
Thank you!
Beverly Schulz

Beverly,
I can't imagine that another Beverly Schulz would be posting to this forum other than the one that teaches for ed2go. Since your name popped up here I want to take the opportunity to say that I took PSE5 Advanced and it was the best ever online class I have taken. The knowledge has served me well and I still refer to my notes.
I hope someone can solve your problem. I am now working in PSE7 and am interested in the responses.
Best of luck.
A former student,
Dianne McDermand

Off-white backgrounds

Hi
Just lately, the last few months when I start to record something in Captivate 4 everything seems fine, i look at the source code and its fine. White backgrounds, the mouse moving along etc.
When i publish/preview the course the backgrounds are an off-grey colour instead of pure white. The mouse moves along but the second it clicks i get a white horizontal line. Same for text being typed, the background is grey, then theres a horizontal block all the way across the screen where the text animation plays.
I could export every background graphic, make it pure white, or delete the strange mouse animations and try to add them but obviously that'll take some time.
Anyone else come across this ? Recording where theres lots of white screens and then when you publish it its off grey ?
Any ideas ?
Regards

Hi there
If this is full motion capture, perhaps change the setting to 32 bit? (Edit > Preferences > Recording > Full Motion Recording
Or if it's not Full Motion Recording, perhaps select the slides in question, right-click them and change the Video Quality.
Cheers... Rick
Helpful and Handy Links
Captivate Wish Form/Bug Reporting Form
Adobe Certified Captivate Training
SorcerStone Blog
Captivate eBooks

Changing white backgrounds to remove glare

Dear List Members
I have been working with an e-learning developer for several
years now to advise her in
my capacity as a statistician on the design of e-learning
materials which rely on Flash
animations and objects. I am not a trained user of Flash.
At my place of work, we use an online sequencing engine
called EROS (Edinburgh
Reusable Sequencer) which facilitates linear progression
through pages of content forming
CAL tutorials and quizzes and the use of many different
question types together with the
use of a range of media including images, videos and Flash
animations.
I would be interested to receive advice on whether it is
possible to add in any features
to previously created Flash objects, and indeed to the pages
including these objects,
which will enable white backgrounds to be overlaid or
replaced by backgrounds of an
alternative colour. The idea is to render the learning
materials more inclusive for
users who are dyslexic without attempting the impossible and
unreasonable in terms of a
reconstruction job.
Whilst reconstruction of the Flash objects is not a pragmatic
option, perhaps some of our
list members are aware of how the above feature can be
incorporated into e-learning
materials retrospectively. I also have some specific
questions in relation to any
possible solution. Is there a feature that can be switched on
or off by the student or
would we need to build in the shaded backgrounds as a
permanent feature? How would the
implementation of the shading work in practice?
For your info, currently, the e-learning developer is using
Adobe Flash 9.
Thank you in advance for any clarifications.
Best wishes
Margaret

I had a go at the first image, and took about five to ten minutes, but that was without fixing the skin tones that are going to be affected by all that pink light flying around your studio. But the second image looks more of a challenge, and with 600 images to be processed...
You can see how pink the skin tones are against white. The translucent clothes and reflective black shoes, are fairly easily fixed by taking all the red out of the image with a masked H/S layer, but getting those skin tones spot on for 600 images... well I wouldn't want the job.

Best way to edit out a white background and make a transparent gif

I have an image I purchased but need to make it into a gif. It already has a white background but when I use the magic wand it chops little bits of the edge of the images up.
Is there an easier way of editing the white out of this background and making a transparent gif?
I am using Adobe Photoshop CS2
Image is attached to take a look.
Thanks, I appreciate any help with this.
Nick

Worked perfect at a tolerance of 10, didn't know what that was for before
Thanks!
Nick

I recently upgraded to iOS 7.0. When I open Safari to a blank page, a small "Settings" icon appears against the white background. When I click on it, it opens a link to a web page that is not among my other bookmarks. How can I get rid of it?

I recently upgraded to iOS 7.0. When I open Safari to a blank page, a small "Settings" icon appears against the white background. When I click on it, it opens a link to a web page that is not among my other bookmarks. How can I get rid of it?

Leliforever, cheek you list of installed add-ons, the Ask toolbar can be installed without the users knowledge.
For checking other extensions that may cause this, follow the procedure in this link - https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes

My iphone 4 is stuck on the hello screen...with a white background after i tried to update it. How do i correct this? I have already gone to itunes and backed it up. But after i back it up it always return to the hello screen in different languages ?

My iphone 4 is stuck in the setup phase with a white background. It tells me hello in several diffrent languages and tells me to slide to set up. I have already backed it up on itunes several times but it always returns to the hello screen with the white back ground. Can anyone please help me with this? All of this happened after i updated it for the 1st time. Help pLease?
Edward

Hello Edward
Follow the prompts on your iPhone and you will get either at your home screen like normal or get to a point of restoring from back up. The article below will give step by step for restoring from back up.
iOS: How to back up and restore your content
http://support.apple.com/kb/HT1766
Thanks for using Apple Support Communities.
Regards,
-Norm G.

How can I make the background one solid color? It is too difficult and noticeable when I use the retouch button and try to erase all the creases in my backdrop. So, how can I have just a solid white background?

How can I make the background one solid color? It is too difficult and noticeable when I use the retouch button and try to erase all the creases in my backdrop. So, how can I have just a solid white background?

When talking about a specific image posting the image may be useful.
One can use a Layer Mask and add a white Layer underneath.

How Do I: Remove White Background From a Non-Standard Sized PDF?

Hello. Been a little while since I was last here.
My issue is pretty simple. I am creating a PDF in Acrobat Pro X from MS-Word 2007. My document is landscaped half-page sized (US), so dimensions are: 8.5" wide, 5.5" high.
When I attempt to print to PDF, the dimensions come out correctly, but there is a white background which is the size of a landscaped 8.5" x 11" sheet. Against this background, the 8.5" x 5.5" area is situated (nearly) centered vertically, but "right-justified" horizontally (see image). I need to find out how to fix this.
Here's what I know:
In MS Word:
For "Page Setup" (under Page Layout tab):
- under Margins tab, orientation is landscape;
- under Paper tab, "Paper size" is "Custom size", with Width 8.5", Height 5.5" ;
- No changes under Layout tab.
For "Preferences" (under Acrobat tab)
- under Settings tab, "Conversion Settings" are a custom setting ("Advanced Settings"), with "Default Settings" of Width 8.5 inches and Height 5.5 inches.
When I Print > Adobe PDF:
For "Properties" in Print window:
- Under Layout tab, "Orientation" is "Landscape" ;
- Under Paper/Quality tab, "Paper Source" is custom with Width 8.5" and Height 5.5".
- Under Adobe PDF Settings tab, "Default Settings" is "High Quality Print (Custom)" with (Custom) being the settings I set under Acrobat > Preferences.
- Also under Adobe PDF Settings tab, "Adobe PDF Page Size" is custom with Width 8.5" and Height 5.5".
The result is pictured above.
The last thing I did before posting this was run Help > Repair Acrobat Installation in Adobe X. Any suggestions? You can't do worse than I have.

If you want to remove a background and add a new one Photoshop Element for Mac makes it rather easy to do:
OT

Is there a way to change the WHITE background color of the photo gallery/COLLECTIONS to BLACK. IPad 4 ios 7

As a Professional Photographer, I chose to buy an IPad 4 for only one reason and that was the amazing color and clarity of the Photo Gallery as a mobile Portfolio.
Originally the background color of the IPad 4 Gallery was BLACK and this facilitated the photos greatly, photos look better and stand out better on a BLACK background. White backgrounds cause a glare eminating from the edges of the photo and cause iris in our eyes to close down, degrading the quality of the photo being viewed.
I updated to ios 7 and now my IPad 4 has a WHITE background, which is unacceptable for viewing photos.
HOW DO I CHANGE the WHITE background on the Photo/Gallery/COLLECTIONS to BLACK?
Apple should ALWAYS give USERS/OWNERS of their products control of such details. IT'S JUST GOOD CUSTOMER SERVICE!

Vancouver22 Thanks for your help... the SLIDESHOW turned black for me automatically when the slideshow began. That works most excellent!
Now if I can just get the White Background to STAY BLACK, this might not be as painful as I feared.
My IP4 does lag slightly, but not enough to set fire to it yet.
The gallery/COLLECTIONS/ALBUMS are the most important thing to me.
Thanks!
Jon Dize aka DIZEMAN   (Not quite BATMAN, but whatchagonnado?}
[email protected]
http://dizeman.com/ (Bio)
http://dizeman.com/rock&roll/   (Rock Stars Clients/Subjects)
http://dizeman.com/glamour/    (Playboy Centerfold Shoots)
http://dizeman.com/thisnthat/   (Just stuff I shot on the way to stuff to shoot.)

ID 5.5 Interact. PDF, cannot remove white background for Multi-States and buttons.

Hi
I am working on an Interactive PDF Portfolio document. The problem I have is with Multi-State object feature with several buttons going to states that need to be exported as a SWF and imported back into InDesign 5.5. See, the background of my entire doc. is GREY, but when I import the SWF (as directed in Lynda.com videos correctly) and export the entire doc as Interactive PDF and view it in Adobe Acrobat Pro (version 10.1.1) is when all the trouble starts.
When I try to get rid of the WHITE background around the Multi-State objects and the buttons for them (using Select Object Tool and then control+click on it to change the Properties to Transparent Background Appearance) it does not change, even when I go forward and backward to the page.
Does the option of removing white background and making it transparent work only for Animation, but not Multi-State feature with buttons?
Can anyone suggest any other tecnique to create a nice slide show that works in Interactive PDF in ID CS5.5? Please..
Sincerely,
in need of help,
Eve

I have 8 Multi-State objects in one stack on the left and the 8 buttons for each state in the stack on the right. The background of my document is dark grey. There is space inbetween Multi-State objects and the buttons that show the grey background. But after exporting as SWF the Multi-States together with the buttons and placing the SWF back in the PDF file, the space inbetween Multi-States and buttons that is supposed to show the grey background appears white. The problem is that I cannot even change this white background to transparent in Acrobat Pro, as well. I used to do that to animations and it worked, but not in this case.

Is there a way to remove the white background from clip art

Is there a way to remove the white background from clip art?

And replace it with what? transparency? You'll need to work in a format that supports that like png or psd. So you'll need a good editor too.
Regards
TD

How to print CWiGraph control in white background and different font?

I have a CWiGraph control in dialog. I look at your example for printing the CWiGraph control, but I don't want print the exact image like showing on the screen, I like to print the graph in white background, not the same color like graph frame and plot area on the screen. Also I want to change a label font to show on the paper. How to do that?
Thanks.
mliu

First_knight wrote:
please tell me am i thinking right
about this method: setImageableArea(.....)
public void setImageableArea(double x, double y, double width, double height);
like I said, I've tried this method and it doesn't seem to do anything.
the width=the JFrame Width,the height=the JFrame Height right?actually, when printing, 72 points (printing version of pixels) = 1 inch, so to do WYSIWYG, you need width = JFrameWidth * 72.0 / Toolkit.getToolkit().getScreenResolution. Ditto with height
upper left beginningx(0)---------------------------200--------------------------------600-----------------------------------y(1000)upper right beginningyou need to do something like PageSetup.getImageableX and do Graphics.translate(x,y);
also, if your page width = 720, that = 10 inches - that's a wide page (unless its in landscape)
so if i want the JFrame To Be In The Center Of The Page I Would Choose From x=200 ,y=600 depending that frame width is 400Actually, it would be 300 - 700 in your example
Because when i tried to use:setImageableArea(200, 600, 400, 200);like the above code
no changes occurs in the printed paperYes. You need to offset the Graphics object

White background on form

Similar Messages

Maybe you are looking for