White backgrounds OS5

Hi again
Since updating to OS5, when i click my BB icon to bring up my full icon menu the backgroud on the phone turns bright white which im not keen on and is straining my eyes, how do i go about changing this? i have my own theme added which used to have a black backgroud?
Cheers
Matt

Sounds like a defective panel then, get it replaced.

Similar Messages

Best way to edit out a white background and make a transparent gif

I have an image I purchased but need to make it into a gif. It already has a white background but when I use the magic wand it chops little bits of the edge of the images up.
Is there an easier way of editing the white out of this background and making a transparent gif?
I am using Adobe Photoshop CS2
Image is attached to take a look.
Thanks, I appreciate any help with this.
Nick

Worked perfect at a tolerance of 10, didn't know what that was for before
Thanks!
Nick

I recently upgraded to iOS 7.0. When I open Safari to a blank page, a small "Settings" icon appears against the white background. When I click on it, it opens a link to a web page that is not among my other bookmarks. How can I get rid of it?

I recently upgraded to iOS 7.0. When I open Safari to a blank page, a small "Settings" icon appears against the white background. When I click on it, it opens a link to a web page that is not among my other bookmarks. How can I get rid of it?

Leliforever, cheek you list of installed add-ons, the Ask toolbar can be installed without the users knowledge.
For checking other extensions that may cause this, follow the procedure in this link - https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes

My iphone 4 is stuck on the hello screen...with a white background after i tried to update it. How do i correct this? I have already gone to itunes and backed it up. But after i back it up it always return to the hello screen in different languages ?

My iphone 4 is stuck in the setup phase with a white background. It tells me hello in several diffrent languages and tells me to slide to set up. I have already backed it up on itunes several times but it always returns to the hello screen with the white back ground. Can anyone please help me with this? All of this happened after i updated it for the 1st time. Help pLease?
Edward

Hello Edward
Follow the prompts on your iPhone and you will get either at your home screen like normal or get to a point of restoring from back up. The article below will give step by step for restoring from back up.
iOS: How to back up and restore your content
http://support.apple.com/kb/HT1766
Thanks for using Apple Support Communities.
Regards,
-Norm G.

How can I make the background one solid color? It is too difficult and noticeable when I use the retouch button and try to erase all the creases in my backdrop. So, how can I have just a solid white background?

How can I make the background one solid color? It is too difficult and noticeable when I use the retouch button and try to erase all the creases in my backdrop. So, how can I have just a solid white background?

When talking about a specific image posting the image may be useful.
One can use a Layer Mask and add a white Layer underneath.

How Do I: Remove White Background From a Non-Standard Sized PDF?

Hello. Been a little while since I was last here.
My issue is pretty simple. I am creating a PDF in Acrobat Pro X from MS-Word 2007. My document is landscaped half-page sized (US), so dimensions are: 8.5" wide, 5.5" high.
When I attempt to print to PDF, the dimensions come out correctly, but there is a white background which is the size of a landscaped 8.5" x 11" sheet. Against this background, the 8.5" x 5.5" area is situated (nearly) centered vertically, but "right-justified" horizontally (see image). I need to find out how to fix this.
Here's what I know:
In MS Word:
For "Page Setup" (under Page Layout tab):
- under Margins tab, orientation is landscape;
- under Paper tab, "Paper size" is "Custom size", with Width 8.5", Height 5.5" ;
- No changes under Layout tab.
For "Preferences" (under Acrobat tab)
- under Settings tab, "Conversion Settings" are a custom setting ("Advanced Settings"), with "Default Settings" of Width 8.5 inches and Height 5.5 inches.
When I Print > Adobe PDF:
For "Properties" in Print window:
- Under Layout tab, "Orientation" is "Landscape" ;
- Under Paper/Quality tab, "Paper Source" is custom with Width 8.5" and Height 5.5".
- Under Adobe PDF Settings tab, "Default Settings" is "High Quality Print (Custom)" with (Custom) being the settings I set under Acrobat > Preferences.
- Also under Adobe PDF Settings tab, "Adobe PDF Page Size" is custom with Width 8.5" and Height 5.5".
The result is pictured above.
The last thing I did before posting this was run Help > Repair Acrobat Installation in Adobe X. Any suggestions? You can't do worse than I have.

If you want to remove a background and add a new one Photoshop Element for Mac makes it rather easy to do:
OT

Is there a way to change the WHITE background color of the photo gallery/COLLECTIONS to BLACK. IPad 4 ios 7

As a Professional Photographer, I chose to buy an IPad 4 for only one reason and that was the amazing color and clarity of the Photo Gallery as a mobile Portfolio.
Originally the background color of the IPad 4 Gallery was BLACK and this facilitated the photos greatly, photos look better and stand out better on a BLACK background. White backgrounds cause a glare eminating from the edges of the photo and cause iris in our eyes to close down, degrading the quality of the photo being viewed.
I updated to ios 7 and now my IPad 4 has a WHITE background, which is unacceptable for viewing photos.
HOW DO I CHANGE the WHITE background on the Photo/Gallery/COLLECTIONS to BLACK?
Apple should ALWAYS give USERS/OWNERS of their products control of such details. IT'S JUST GOOD CUSTOMER SERVICE!

Vancouver22 Thanks for your help... the SLIDESHOW turned black for me automatically when the slideshow began. That works most excellent!
Now if I can just get the White Background to STAY BLACK, this might not be as painful as I feared.
My IP4 does lag slightly, but not enough to set fire to it yet.
The gallery/COLLECTIONS/ALBUMS are the most important thing to me.
Thanks!
Jon Dize aka DIZEMAN   (Not quite BATMAN, but whatchagonnado?}
[email protected]
http://dizeman.com/ (Bio)
http://dizeman.com/rock&roll/   (Rock Stars Clients/Subjects)
http://dizeman.com/glamour/    (Playboy Centerfold Shoots)
http://dizeman.com/thisnthat/   (Just stuff I shot on the way to stuff to shoot.)

ID 5.5 Interact. PDF, cannot remove white background for Multi-States and buttons.

Hi
I am working on an Interactive PDF Portfolio document. The problem I have is with Multi-State object feature with several buttons going to states that need to be exported as a SWF and imported back into InDesign 5.5. See, the background of my entire doc. is GREY, but when I import the SWF (as directed in Lynda.com videos correctly) and export the entire doc as Interactive PDF and view it in Adobe Acrobat Pro (version 10.1.1) is when all the trouble starts.
When I try to get rid of the WHITE background around the Multi-State objects and the buttons for them (using Select Object Tool and then control+click on it to change the Properties to Transparent Background Appearance) it does not change, even when I go forward and backward to the page.
Does the option of removing white background and making it transparent work only for Animation, but not Multi-State feature with buttons?
Can anyone suggest any other tecnique to create a nice slide show that works in Interactive PDF in ID CS5.5? Please..
Sincerely,
in need of help,
Eve

I have 8 Multi-State objects in one stack on the left and the 8 buttons for each state in the stack on the right. The background of my document is dark grey. There is space inbetween Multi-State objects and the buttons that show the grey background. But after exporting as SWF the Multi-States together with the buttons and placing the SWF back in the PDF file, the space inbetween Multi-States and buttons that is supposed to show the grey background appears white. The problem is that I cannot even change this white background to transparent in Acrobat Pro, as well. I used to do that to animations and it worked, but not in this case.

Is there a way to remove the white background from clip art

Is there a way to remove the white background from clip art?

And replace it with what? transparency? You'll need to work in a format that supports that like png or psd. So you'll need a good editor too.
Regards
TD

How to print CWiGraph control in white background and different font?

I have a CWiGraph control in dialog. I look at your example for printing the CWiGraph control, but I don't want print the exact image like showing on the screen, I like to print the graph in white background, not the same color like graph frame and plot area on the screen. Also I want to change a label font to show on the paper. How to do that?
Thanks.
mliu

First_knight wrote:
please tell me am i thinking right
about this method: setImageableArea(.....)
public void setImageableArea(double x, double y, double width, double height);
like I said, I've tried this method and it doesn't seem to do anything.
the width=the JFrame Width,the height=the JFrame Height right?actually, when printing, 72 points (printing version of pixels) = 1 inch, so to do WYSIWYG, you need width = JFrameWidth * 72.0 / Toolkit.getToolkit().getScreenResolution. Ditto with height
upper left beginningx(0)---------------------------200--------------------------------600-----------------------------------y(1000)upper right beginningyou need to do something like PageSetup.getImageableX and do Graphics.translate(x,y);
also, if your page width = 720, that = 10 inches - that's a wide page (unless its in landscape)
so if i want the JFrame To Be In The Center Of The Page I Would Choose From x=200 ,y=600 depending that frame width is 400Actually, it would be 300 - 700 in your example
Because when i tried to use:setImageableArea(200, 600, 400, 200);like the above code
no changes occurs in the printed paperYes. You need to offset the Graphics object

How can I add .PNG images to templates without getting a white background?

I'm having problems with a image field when I add a .png image which doesnt have a background it is showing up with a white background. Is it possible to use images in templates so you can overlay them on something else?

Hi, You can do this but only with a PNG with a palette of 256 colors (maybe GIF as well) so doesn't get a lot of use, good enough for image buttons and the like, but might be ok for your image as it does not have that many colors. Otherwise radzmar's suggestion would be the better approach.
This is the link I was tring to find (in your previous thread) that tells how to do it using GIMP (a free image editor), http://smartforms.business.gov.au/DeveloperResources/Pages/HintsandTips.aspx , but the one I have uploaded here comes from photoshop (in photoshop it is called an indexed png).
Regards
Bruce
p.s. I'm always on the lookout for a new beer to try if this one you would recommend? 3% and all.

Any way to get rid of the awful white background in grid view?

The old dark background was infinitely easier on the eyes, and more attractive. When I look at stuff in grid view now it gives me a headache. Any chance of changing this back via terminal or something?

I would also like to know how to get rid of ugly *** white background. It ****** me off every time I have to look at it. There is nothing that I see here as being an improvement over the last itunes.

How do I select a black and white sketch from a white background and keep the filled in area of the sketch? I want to copy it to a colored background. I amusing elements 12.

How do I select a black and white sketch from a white background and keep the filled in area of the sketch? I want to copy it to a colored background. I am using elements 12.

oesrowstreasurer
Please clarify your "Elements 12". Is that as in Photoshop Elements 12 (photo editor) or Premiere Elements 12 (video editor). And, on what computer operating system is the program running?
Your question is pointing to Photoshop Elements 12 and that you have posted in the wrong forum. If this is a Photoshop Elements 12 question as I believe it is, please post your thread in the Adobe Premiere Elements Forum using the following link provided for your convenience
https://forums.adobe.com/community/photoshop_elements
The alternative is to wait for a moderator to see your thread here and move it from here to the Adobe Photoshop Elements Forum..
We will be watching for a confirmation on what program you are using.
ATR

How can I select and delete the fill color (white background) of a live trace (B&W) with in an actio

How can I select and delete the fill color (white background) of a live trace (B&W) with in an action set?
Illustrator CS4 in windows XP.

Maybe Li[ve trace] is not t]he way[ to go
I have some suggestion one leave it as is and use a blending mode of multiply to give it a color background like this
leave it as is make it a grayscale tiff import int Illustrator and color it it in Illustrator like this
Or trace over it with the brush tool aand then give it a color ground.
Or do the original over and do a cleaner job with no tone or a minimum of tone. Then Live trace.

How do I get a white background with black lines

How do I get a white background with black lines and characters on my screen. To run the program, copy it out and delete the ` and it should go. If it does not compile on your machine, I would like to know. There is a test on about line 34 for changing the colors.
`//Simple program to test Graphics2D.setBackground(white) obtained from BufferedImage.getGraphics()
`import java.awt.Frame; //Object>awt.Component>Container>Window>Frame
`import java.awt.Insets; //Object>awt.Insets
`import java.awt.image.BufferedImage; //Object>awt.Image>awt.image.BufferedImage
`import java.awt.Graphics; //Object>awt.Graphics
`import java.awt.Graphics2D; //Object>awt.Graphics>Graphics2D
`import java.awt.Color;
`import java.awt.BasicStroke;
`public class TstBgCol { //frame & BufferedImage in pixels & BasicStroke in points ????????????
` TstBgCol tstBgCol;
` public static void main(String[] args) {
` TstBgCol tstBgCol=new TstBgCol(); tstBgCol.tstBgCol=tstBgCol;
` tstBgCol.main2(); tstBgCol.byteBinary();
` }
` Graphics fgcontext;
` Frame fram; Insets insets; //borders of the Frame, Container.getInsets
` int bIWid=1272,bIHgt=876; //set for 1280x1024 screen on windows XP & matches paper ratio 10.6x7.3
` int unusedPixHgt=84;
` void main2() {
` fram=new Frame();
` fram.addWindowListener(new java.awt.event.WindowAdapter() { //anonymous inner class
` public void windowClosing(java.awt.event.WindowEvent e) { System.exit(0); }
` });
` fram.setVisible(true);
` insets=fram.getInsets(); //(Container)getInsets() works after displayable
` System.out.println("Insets l,t,r,b:"+insets.left+","+insets.top+","+insets.right+","+insets.bottom);
` fram.setSize(insets.left+bIWid+insets.right,insets.top+bIHgt+unusedPixHgt+insets.bottom);
` fgcontext=fram.getGraphics(); //creates Graphics context for this component
` }
` void byteBinary() {
` BufferedImage buIm=new BufferedImage(bIWid,bIHgt,BufferedImage.TYPE_BYTE_BINARY); //can be resized
` Graphics2D bIG2=buIm.createGraphics(); //returns Graphics2D context
` //change to if(true) to use either of the following two lines
` if(false) bIG2.setBackground(Color.white); //does not change the background color to white
` if(false) bIG2.setColor(Color.black); //does change the foreground color to black
` edgeLinesAndX(buIm,bIG2);
` fgcontext.drawImage(buIm,insets.left,insets.top,fram);
` }
` private void edgeLinesAndX(BufferedImage bI,Graphics2D bIG2) { //really on the edge
`      BasicStroke strk=new BasicStroke(10f); bIG2.setStroke(strk);
` int x0,y0,xmx,ymx;
` x0=bI.getMinX(); y0=bI.getMinY(); xmx=bI.getWidth()-1; ymx=bI.getHeight()-1;
` bIG2.drawLine(x0+xmx,y0,x0,y0+ymx); //lo-left to up-right
` bIG2.drawLine(x0,y0,x0+xmx,y0+ymx); //up-left to lo-right
` bIG2.drawLine(x0,y0,x0+xmx,y0); //up-left to up-right
` bIG2.drawLine(x0,y0,x0,y0+ymx); //up-left to lo-left
` bIG2.drawLine(x0,y0+ymx,x0+xmx,y0+ymx); //lo-left to lo-right
` bIG2.drawLine(x0+xmx,y0,x0+xmx,y0+ymx); //up-right to lo-right
` bIG2.drawString("("+x0+","+y0+") wid="+(xmx+1)+" hgt="+(ymx+1),(xmx+1)/5,(ymx+1)/5);
` }
`} //the result on my screen is a black background, why?????

How do I get a white background with black lines and characters on
my screen.Contrary to what you might think, the linebIG2.setBackground(Color.white);does not give the buffered image a white background. The API docs
http://java.sun.com/j2se/1.5.0/docs/api/java/awt/Graphics2D.html#setBackground(java.awt.Color)
say: "Setting the background color in the Graphics2D context only
affects the subsequent clearRect calls... " So adding a line to your
if blocks we getif (false) {
    bIG2.setBackground(Color.white);
    bIG2.clearRect(0, 0, buIm.getWidth(), buIm.getHeight());
if (false) {
    bIG2.setColor(Color.black);
}Changing the false to true results in a white background (and black
X and text).

White background​s OS5

Similar Messages

Maybe you are looking for

White backgrounds OS5