White Balance Not Showing As Color Temp

running ACR 6.1 on Windows XP boxes. I'm used to adjusting white balance by utilizing color temperature settings, but I don't seem to have that option in ACR 6.1--All I have is a sliding scale from -100 to +100 and I don't see any way to change this. Am I stuck with using ACR this way?

What type of image format is it?
The behavior you're describing is for a non-RAW image. RAW images have absolute temperature. JPGs and TIFs only have relative temperature because the white-balance has already been baked in so to speak without enough information to reverse-engineer the absolute color temperature.

Similar Messages

Finder does not show all colors from selected color Labels

Since a view days finder does not show all Color Label colors. When I select either yellow or green it is selected, but it does not show in the file list with details, I can see it in icon and 3 pane view, but not in the detail list view.
does anybody know why or how? Or what plist files I might need to delete to get this reset?

Create a new account, name it "test" and see how your labels work in that User acct in list view? (That will tell if your problem is systemwide or limited to your User acct.) This account is just for test, do nothing further with it.
Open System Preferences >> Accounts >> "+" make it an admin account.
Let us know and we'll troubleshoot this further.
-mj
[email protected]

JColorChooser : "Swatches"-tab's recent-panel not showing recent color

Hello all,
in JColorChooser on "Swatches" tab we have one panel named "recent" and another
named "Preview".
Problem 1.
After i close my Color-chooser-dialog and reopen again , Preview-panel shows
the last selected ie recently selected color BUT recent-panel not showing any color.
Although on other Tab like "RGB" i am getting the selected color's RGB values .
Below is the code-snippet , Am I doing anything wrong ?
Problem 2.
This problem is not consistent. What happens that whatever RGB values i set,
next time when i open the chooser , Red-value gets educed by 1 !!!
/// code snippet
Color defaultForeground = conFont.getForeground(); /// this gives last selected color
Color newColor = JColorChooser.showDialog(GSCommonUtility.getAMStudioFrame(),CommonToolProperties.bundle_ToolProperties.getString("ComContributionsAdapter_ChooseForeground"),defaultForeground);
Can someone please through some light on these 2 problems?
thanx n regds,
Rajesh

I'm having the same problem with the default color chooser. Whenever it is closed it seems to lose all of the recent colors information. If you figure it out please let me know!!

Why does my infrared custom white balance not load into Lightroom or CameraRaw?

The preview shows the correct WB, but the full render removes WB and any monochromatic color profiles.
Correct WB that I want. As seen from back of camera
Once the full preview loads. DO NOT WANT.
White balance is at 2000, the coolest it can go. I cannot recreate the custom WB that is in camera. I can make all of the B&W, but I want the custom WB so I can do a proper channel mix in PS.
Thank you for any help.

You can use the DNG Profile Editor to add a negative bias to the WB settings in an existing camera profile and save it as a new profile (for IR) so you can adjust the effective WB lower than 2000K:
http://stevencastle.wordpress.com/2010/07/17/processing-infrared-shots-in-adobe-camera-raw /
It still won’t pick up what the camera did, but you can adjust things lower, at least.
If this one page doesn’t make sense Google for (DNG Profile Editor IR white balance)

White Balance NOT Synchronizing in Bridge CS5

Instead of LR3 I use Bridge CS5 and the camera raw tool for my edits (it's all the same tools and runs faster.) ANyways, a strange problem i noticed recently after SEVERAL job edits.. I noticed the white balance was not the same on all my files. THIS IS A HUGE *** PROBLEM FOR ME! I tried everything but for some reason Bridge is not synchronizing the white balance, even if I just have white balance selected.. I need to have all my files the same.. I doesn NOT work in the camera raw module and it does NOT work when you right click, go to settings, copy settings and then paste settings..
Any one else experienced this?
I have ACR 6.1 installed

Is the WB As Shot, perhaps? Synchronizing As Shot as your WB does exactly that, sets the WB to whatever the camera was set to, which if it is Auto WB in the camera, then the Temp/Tint values will be different for each photo. If you want all the WB settings to be the same Temp/Tint values you must change the WB to Custom or use one of the built-in WB selections that has a constant set of Temp/Tint numbers.
What I usually do is modify the As Shot WB to something slightly different by changing the Tint value and then set the Tint value back to what it was if necessary, which will make it say Custom instead of As Shot, and then synchronize with this Custom value.

FS10N g/l Balance not show

Dear Guru ,
Issue is , When i Check GR/IR Clearing /ac in FS10N , the for period 1, 2 and 3 Period toal dr and cr Balance does not display.
balancy disply only for 4 and 5 Balance .
I already check in GLT0 Table , thr also sys does not show G/L Bal.
When i check for period 1,2, 3 line item showing in the fs10n , but only total DR/CRbal does not show in FS1ON .
How to resolve this issue .
Wear using 4.7 Version .
Thanks in Advance .
Milind

Dear ,
Yes thr already balance carrie forward process done at the time of year end process .
an i aleady check every thing in perticulre g/l entris and g/l all tables.
Please suggest what I can do ..
Regards ,
MILIND

Browsers not showing same color from DW

Folks, I have somelinks I am designing in photoshop and
placing in a table in DW. I made the background color of the table
the same as the grey in my link graphic by sampling the color with
the eye dropper on the graphic.
The greys from the table background and the link show up fine
in Safari, as hough there is no separation in color, however in
Internet Explorer and Firefox there is clearly a separation of
color.
I am on a Mac using OS X if this makes any difference.
I need help.

Michael Hager wrote:
> You need to use "web safe" colors only. They are the
colors set in the pop-up
> color boxes in Dreamweaver. They are the only colors the
(mostly) display the
> same on every browser/color setup out there. They are
based on the old
> standard 256 color range of the earlier VGA monitors. We
now have
> multi-million color monitors but web browsers and web
design have not caught up
> to that (and might never)
>
> Instead of sampling the graphic and picking the color,
sample the color and
> change the background in Photoshop to match. It is the
only way you can be
> sure that you will have a match in 99% of peoples
displays. Otherwise, pick a
> contrasting color or use PNG or GIF files with
transparent backgrounds.
>
>
That's not what web safe colors means today, and in any even
different
monitors will show your colors somewhat differently.
Here's an interesting article about it that's not **too**
old:
http://webdevelopersjournal.com/articles/websafe1/websafe_colors.html
and here's another:
http://webmonkey.com/webmonkey/00/37/index2a.html
Bonnie
in California
8 ^ )

FS10N GL Balances not showing line item details

Hi Expert,
i am unable to see the posted document in FS10N. i ve check the Button in FS00 Line Item display.. and save it.
again i did but FS10N display line item not showing .. see the error message below.
No items selected (see long text)
Message no. MSITEM033
Diagnosis
No line items meeting your selection criteria could be read. This could be for the following reasons:
1. No corresponding items have been posted.2. You are not authorized to display this data.3. The items have already been archived.4. Migration from classic General Ledger Accounting to new General Ledger Accounting: In migration phase 1, postings are only made to the account for the non-leading ledger

Big hello for you too my friend My 2 babies are taking all my attention! I am missing my old times here!
See, you have to understand when you have posted your GL account in 2013 you had only balance information stored. It means you have no data stored in table BSIS. When you activated Line item display this issue stands.
You won´t create entries in BSIS if you check that flag. Thus you only will have items from now on.
Have a test. Post new entries and check. they will appear.
Check also
LINEITEMS MISSING IN FBL3N AND FS10N
Best Regards!

BP Balance not showing correctly in Aging report

Good Day all B1 experts,
We are converting to SAP B1 for fiscal year 2010 and earlier today I have found a problem with BP balance on the AR side. Below is a summary of the problem:
Problem:
- For some BP, after I entered opening balances, their total outstanding AR balance was not reflected in the Aging report, nor can be found in the Opening Balance window (under System Initialization).
- However, A/R control General Ledger account is correct and ties to my Year End 2009 Financial Statements
Attempted Solution:
- I reentered the "missing" opening balance for those BP accounts. After entering the numbers, however, the Aging report shows a DOUBLED amount of the correct balance. And when I go check the Opening Balance window, the system is showing the correct BP balance (NOT Doubled).
- Now my A/R control General Ledger and Opening Balance General Ledger Account is out of balance as well. The difference equals to the amount I reentered.
Has anyone encountered similar problem before? I cannot think of anything I did to cause such mess. In any case, I am wondering if I need to use the Restore BP function.
Please provide me some guidance on this. Thanks!!!
BR,
Sunny

Good Morning Kerstin,
Thank you for the article. The version that we are using is 2007A (8.00.180) SP:00 PL:45
In the article, it mentioned about the Single Reconciliation Engine. Do you know if that tool comes along with previous upgrades, or we will have to download and install it?
Actually it seems for one of those problem BP accounts, the correct balance is reflecting on the Aging Report after an invoice was issued yesterday. However, its BP balance is still not correctly reflecting elsewhere (such as Incoming Payment under banking module.)
Regards,
Sunny

Account Balance not showing correctly

Sir,
Suppose , i have posted an invoice of Rs.200 against a customer and after some times i recieved payment from this customer of Rs.200 So, accout balance of this customer should be zero.. But when i see the account balance from business partner master data , it should me Rs.-400 in accout balance field but when i navigate through orange arrow in to accoutn balance details , there i get zero in balance due field?? ie. it is showing coorectly in details of account ballance but in the business partner master data it is not showing correctly??

hi divya,
Check SAP Note 904002 - Customer account balance is displayed with negative sign
Summary
Symptom
Customer Balance is displayed with minus.
Other terms
Customer balance, Supplier Balance, Credit Balance, Debit Balance, Display Credit Balance with Negative Sign, Company Details, System Initialisation, business partner, accounts, SAP Business One
Reason and Prerequisites
Customer balance is displayed in negative though you expect it to be positive.
Solution
Under Administration->System Initialisation->Company Details and the 'Basic Initialisation' tab you will find the setting 'Display Credit Balance with Negative Sign'. This setting decides how Customer and Supplier balances will be displayed.
NOTE!
When creating a company it is important to know that this setting is irreversible once transactions have been made in the company.
When this box IS checked the following applies:
Customer balances will be displayed as Positive.
Supplier balances will be displayed as Negative.
When this box IS NOT checked the following applies:
Customer balances will be displayed as Negative.
Supplier balances will be displayed as Positive.
This setting also influences the entry of opening balances for the G/L accounts. Depending on this setting, the opening balances must be entered as positive or negative numbers.
By default this box is checked when a new company is created.
Header Data
Release Status: Released for Customer
Released on: 02.12.2005 10:42:10
Master Language: English
Priority: Recommendations/additional info
Category: Consulting
Primary Component: SBO-ADM-INI-DET Company Details
Secondary Components: SBO-BP Business Partners
Affected Releases
Release-Independent
Hope it solves problem.
Jeyakanthan

Creative Ultra for Notebook, white balance not working??

After years of use with my Creative Notebook Cam Pro I decided to upgrade and get the Ultra for Notebook because it's a CCD and works better in lower light conditions.
The drivers install fine however I cannot adjust the white balance nothing changes when I click apply. I have both 98SE and XP drivers installed and it appears that the bug is present in both sets of drivers.
This is a big disappointment because using this cam indoor with artificial lighting is next to being useless. Furthermore there's no saturation controls included in the drivers so I couldn't reduce the colour to b/w even if I wanted to.
As a product that's been on the market for nearly 2 years I'm surprised that no bug fixes have been issued for this problem I'm sure it's been mentioned before here?
Does anyone know if CLabs will fix the problem soon because as it stands this product isn't worthy of my time or money.
Richard S.

It should be directly underneath the image preview - press the T key if it's not there.

White Balance not working

I'm using Aperture 3.2.2 and when I use the white balance 'pipette' tool to select neutral grey area no changes are applied. I think I know how this tool works as I have used it in the past. The image I am trying to adjust I also know needs adjusting as it was shot using bounced flash off an cream surface. Of course I can manually change the white balance using the temperature and tint sliders but have found better results in the past using the select neutral grey.
Anyone else having this issue and know of a fix?

Is it only on certain images that the white balance pipette tool does not work, or is it a general problem?
If it does not work on any images, delete the Aperture Preference files, as described in
Aperture 3: Troubleshooting Basics: http://support.apple.com/kb/HT3805
for sometimes user interface elements do not work, when preference files are corrupted.
If only some images cannot be adjusted, then try the library "first aid": repairing permissions and library.
Regards
Léonie

Lightroom D100 custom white balance not read

I have a D100 converted to IR use. I shoot with a custom white balance set off green grass. If I open an image in Raw Shooter or Capture I get the balance I expect. In Lightroom it opens as what looks like an unbalanced "pink" IR shot. Manually adjusting the white balance in LR I can't get my normal results - may be related to the fact that the red channel looks completely clipped at the high end which I don't see in RSP.
The D100 is meant to be supported for reading white balances.
Any suggestions ?
Andrew
ps: I thought I posted this a few days ago but after a couple of days with no response couldn't find it myself so if it is lurking somewhere, apologies !

Suggestion for a workaround:
It seems that you want to work with a specific WB value you know.
Just create a preset with a fixed WB value which you apply by importing your IR shots. Then you don't even have to set it in the camera.
Besides this with my D70 I get the WB valance values from the camera without probs. I have however no experience with the D100
regards
Chris

Display not showing same color/contrast at top of screen as at bottom.

I just got the new Al and Glass 2.4 Ghz imac and my wife noticed that the colors at the top of the screen were deeper and showed more contrast. The same colors at the bottom of the display looked washed out. This is unaffected by viewing angle and tilt of the monitor. I have recalibrated my monitor and tried changing the resolution but the problem was not resolved. Does any one have any suggestions? I'm out of ideas.

As a long time Mac user, I recently bought the new glossy iMac. Having lived with the new imac for the last week and now just cant bear to look at it due to the screen colour difference from top to bottom and like the pervious reply, it seems I have no option but to spend more money for the 24" and then end up with something that is too big for my desk and didt want in the first place, but it may be my ONLY option. It is totally useless for any kind of photography use, which was one of the main reasons why I went for it - oh and yes, I have done gamma and colour calibration
That said, when I called Apple there was no dispute and they immediately said that it would be replaced. So I am awaiting delivery of the replacement unit, not that I really expect it to be any better, but I am willing to give it a try at least. If that fails, then I will have to look into the possibilities of getting the 24" one.
If I had not already pre-sold my eMac, I would gladly have it back and forget that whole iMac thing ... I am just SO disappionted.

IGS issue , not showing background color.

Hello ,
I have bulid a dashborad on which we are showing businees graphic as speedometer.
Now problem is i want to change the background color where my speedometer is placed..
process i followed is :
right clicked on Business graphic element and clicked on Edit Customizing.
than in the overview tab i choose "Background" and in the Broder properties i have given different colors code.
But when i run my application no color gets display....
Few plp suggested to add some tag in the IGS.XML , i dont know what to add in it..
this IGS basis people took from the server and gave to us ...
<?xml version="1.0" ?>
<!DOCTYPE kernelPatches (View Source for full doctype...)>
- <kernelPatches name="BC-FES-IGS" vendor="sap.com" sequenceFile="IgsTasksSequence.xml" sequence="process">
- <os code="*">
- <cmdVersion extractor="SAPCAR" archiveId="IGS" cmd="igswd">
<arg value="-version" />
</cmdVersion>
<sar name="IGS.SAR" pattern="IGS.*\.SAR" dir="igs" id="IGS" manifest="igsmanifest.mf" opCode="X" required="Y" />
<sar name="SAPCAR" opCode="C" required="N" dir="igs" />
</os>
- <os code="WIN">
- <cmdVersion extractor="SAPCAR.EXE" archiveId="IGS_WIN" cmd="igswd">
<arg value="-version" />
</cmdVersion>
<sar name="IGS.SAR" pattern="IGS.*\.SAR" dir="igs" id="IGS_WIN" manifest="igsmanifest.mf" opCode="X" required="Y" />
<sar name="SAPCAR.EXE" opCode="C" required="N" dir="igs" />
</os>
- <os code="OS4">
- <cmdVersion extractor="SAPCAR" archiveId="IGS_OS4" cmd="igswd">
<arg value="-version" />
</cmdVersion>
<sar name="IGS.SAR" pattern="IGS.*\.SAR" dir="igs" id="IGS_OS4" manifest="igsmanifest.mf" opCode="X" required="Y" />
<sar name="SAPCAR" opCode="C" required="N" dir="igs" />
</os>
</kernelPatches>

Also somtimes when i click on Edit customizing it saying
Information message as
Object 'D6RX8LV20IZIFHIS257Y3W2LS.xml' not found
as part of address
'sap/bc/webdynpro/zwdsmf_dashboard//D6RX8LV20IZIFH
I'
Please help.

White Balance Not Showing As Color Temp

Similar Messages

Maybe you are looking for